Get More Features From DJI Goggles With WTF OS

Подписаться 6 тыс.

Просмотров 10 тыс.

50% 1

The DJI goggles V1 and V2 are great, but wouldn’t you like more feature like manual start/stop recording, a higher transmission output, audio recording, or even BetaFlight OSD while flying? These key feature are all available with the latest FPV WTF Operating system. Today we’ll show you how to prepare your goggles for this update, install them, then give a brief demonstration of these features. For more information, check out: github.com/fpv-wtf
If you got help, information, or entertainment from this video, please consider sending us a "Super Thanks". A simple "LIKE" goes a long way as well, and is completely FREE! This directly supports the channel, and allows us to create even more amazing content. Thanks!
Buy the DJI Goggles 2(new version) Here: bit.ly/3As7PWi
Buy the DJI Goggles V2 Here: bit.ly/3AEyAZ0
*All links are affiliated, except where noted.
RELATED VIDEOS:
BetaFlight OSD in you DJI Recordings: • DJI Goggles V1 & V2 Ca...
DJI Goggles V2 1st Impressions: • Everything you NEED to...
DJI Goggles V2 Setup & Flight: • DJI Goggles V2 Setup &...
BDI Adapter: • BDI Digidapter V2 | Fl...
FatShark Scout HD: • FatShark Scout HD | Th...
TinyHawk III RTF Impressions: • EMAX TinyHawk III RTF ...
TinyHawk III RTF Full Specs: • EMAX TinyHawk III RTF ...
TinyHawk III First Flight: • EMAX TinyHawk III RTF ...
TinyHawk III 5 Things I Like and Dislike: • EMAX TinyHawk III RTF ...
Mobula7 HDZ 1st Flight: • Mobula7 HDZERO 1st Fli...
What is HDZERO?: • What Exactly is HDZERO...
What is ExpressLRS: • What Exactly Is ELRS -...
ELRS FULL Setup Pt1: • ELRS FULL Setup and Co...
ELRS TX Nano Module: • BETAFPV ELRS Nano Modu...
GEPRC SMART16 1st Flight: • GEPRC Smart16 1st Flig...
GEPRC SMART16 Unbox: • GEPRC Smart16 | The St...
GEPRC TinyGo Unboxing: • GEPRC Tiny GO 4K Unbox...
GEPRC TinyGO Full Specs: • GEPRC TinyGO FULL Spec...
GEPRC TinyGO Setup & 1st Flight Pt.1: • GEPRC TinyGO Setup & 1...
GEPRC TinyGo 1st Flight Pt2: • GEPRC TinyGO Setup & 1...
GEPRC TinyGO 5 Things to Like & Dislike: • GEPRC TinyGO | 5 Thing...
Radio Lite 2 SE w/ELRS Pt2: • BETAFPV Lite Radio2 SE...
Radio Lite2 SE w/ELRS Pt1: • BETAFPV Lite Radio 2 S...
BabyHawk II 1st Flight: • EMAX BabyHawk II Analo...
BabyHawk II Unbox/1st Impression: • EMAX BabyHawk II ANALO...
BabyHawk II Setup: • EMAX BabyHawk II Analo...
X-Knight35 Unbox: • BETAFPV X-Knight35 | S...
X-Knight35 Setup: • BETAFPV X-Knight35 | S...
X-Knight35 1st Flight: • X-Knight35 1st Flight ...
Beta FPV Pavo30 Unboxing: • BETAFPV Pavo30 | All t...
Beta FPV Pavo30 Full Specs: • BETAFPV Pavo30 Full Sp...
Beta FPV Pavo30 1st Flight: • BETAFPV Pavo30 | Setup...
GEPRC Smart 35 Unbox & Impressions: • GEPRC Smart35 | A 3.5”...
GEPRC Samrt35 1st Flight Pt. 2: • GEPRC Smart35 1st Flig...
GEPRC Smart35 1st Flight Pt.1: • GEPRC Smart35 | FULL S...
Baby Nazgul Unbox & 1st Impression: • iFlight Baby Nazgul | ...
Baby Nazgul Setup & 1st Flight Pt1: • iFlight Baby Nazgul | ...
#wtfos #djigoggles #dji

Наука

Опубликовано:

12 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@Seii-FPV Год назад

Just stopped by to leave this here... your videos are totally underrated. Paint me wrong, but I know when I see good production, and good quality content. You deserve a lot more subscribers and audience, that's for sure! Doesn't mean a lot, but you've just earned another subscriber.

@OneManUnmanned Год назад

Thanks, I really do appreciate that..It’s a work in progress. Thanks for the encouragement.

@Seii-FPV Год назад

@@OneManUnmanned - you definitely deserve it. Don't stop doing what you love to do. Results are obvious!

@kingofthenoobs590 Год назад

if any of you is on the 607 firmware this will not work such easily. Install Butter from fpvwtf and then proceed to follow his guide. Just a tip Great video, thank you

@OneManUnmanned Год назад

Thanks for sharing...I hope these tips help other pilots. If anyone has any other tips or experiences, feel free to share.

@v.a.n.t Год назад

Hello, awesome tutorial. How do you get LQ in OSD? If my MSP is in port 1, which number I have to put in CLI?

@OneManUnmanned Год назад

You can choose to shown link quality in your OSD from the OSD tab in BetaFlight. If you’re using UART1, then you’ll have to type 0 in the CLI.

@PashaHeaven 3 месяца назад

Is it possible to turn on the display of the position of the sticks in flight on the OSD for DJI or BetaFPV system?

@shaneintegra Год назад

Should make a video on how to setup FakeHD + a different font pack. I don't believe anyone has made a video on how to do it

@jayzzz1234 Год назад

Great video I have to ask have you lost any quads in the lake.

@OneManUnmanned Год назад

Haha.. almost, but not yet.

@jayzzz1234 Год назад

@@OneManUnmannedgood to hear, you should check out phantomfpv there's one video where he crashed into a lake and fish were swimming in front of the action camera.

@OneManUnmanned Год назад

Haha.. I'll check it out. That's one of the reasons I wanted the DarwinFPV Hulk drone. There's alot of wildlife in that lake.. 😆

@MrBEEFCAKE26 11 месяцев назад

How do you do this if using i nav can you subtrac ports in cli on inav ?

@PaulSokolov Год назад

BF 4.4 no need to do any CLI commands - Attention with that !!! Can be setup into UART tab. and one more thing - WTF has a couple CLI commands for more stable OSD one - package-config set msp-osd compress_osd true and second - package-config apply msp-osd for stable flow data OSD

@OneManUnmanned Год назад

Thanks, I appreciate that. Hope this info helps other pilots in the future.

@BrainDeadEngineering Год назад

why dont you make a video about that?

@edgardoemralino1136 2 месяца назад

Whoa i just came across this WFT OS and i have to have it. Question If my V2 in the FPV Drone mode has the 01.02.0020 and in the FPV mode (DIY) the firmware is 01.00.0606 can i do this mod? Do i need to update/downgrade firmware?

@gonzafpv2843 Год назад

hello Sr, have a question. Iam using the dji fpv potato v2 googles, and also a custom build cinewhoop. Thing is that on the air unit menu (in googles) it says a a firmware version, and if i conncet the googles to the pc it says another version...the potato fpv googles havew two firmwares as it have to modes? one for the potato and the other more to air unit? any thoughts on this? thanks!

@OneManUnmanned Год назад

There are two versions, because the goggles V2 has two seperate partitions. One is for the original Air units found in most hobby drones, and the other partition is for consumer drones like the FPV Drone “potato”. Depending on what you’re trying to do, you might have to update only one side or both parts of your goggles.

@Media-Oreja 10 месяцев назад

hi, i dont possibly change the firmware for 606 version i have only the 607 version on the goggles, but in the vista unit have the 606 version... how i fix the last version 606 in the goggles ? tanks in advance

@BiecherBender Год назад

hm I don't get it, I thought the goggles are now capable of showing the betaflight OSD (out of the box)? Or is this only necessary for the v1 and v2 goggles?

@OneManUnmanned Год назад

Yes, this is for V1 and V2 goggles. They don't show or record Betaflight OSD stock from the factory.

@BiecherBender Год назад

@@OneManUnmanned oh wow so they didn't add the feature for the v1 and v2 goggles as well. Thanks for the clarification!

@chrisbee5481 Год назад

Hey, I use the v2 goggles with an analog receiver on the AV from the goggles. When you have really bad signal the DJI goggles fade out completely and the DJI symbol comes up. Very annoying to lose the picture a few seconds and that might lead to a crash with bad signal. No I've got all the wtf mods installed. One of them is the AVin mod that is surposed to keep the goggles from going into bluescreen and that dji symobol. So it's surposed to stay like analog goggles until the signal somes back. After installing that AVin mod, do I have to change or set anything for it to work? Where do I do that? REALLY appreciate some help. Can't find any Info on that anywere.

@OneManUnmanned Год назад

I’ve heard of pilots having similar experiences with their goggles, but there are so many factors, including the specific goggle, and what adapter was used. I’m using the BDI adapter and don’t experience the Blue/black screen with DJI logo. I don’t know what you’ll have to do to make that mod work. I don’t think there are any settings within the DJI Goggles. Here’s my experience with the BDI adapter. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yUjWMhT5UhI.html

@chrisbee5481 Год назад

@@OneManUnmanned I'm using that uruav / eachine analog adapter on the side from BG. The TBS Fusion is my analog receiver. That video is more an anboxing than showing actual flight experience. Thanks anyway. I cant trade that BDI adapter for my crystal antenna set. I love them so much. The original DJI antenna are annoying to screw on and off all the time for transporting.

@droneshotstv1158 10 месяцев назад

Pls help i dont have displayport_msp_serial in my CLI…what will i use instead?

@beastold1320 10 месяцев назад

did you solve it?

@WarriorLife_fpv Год назад

I heard JB say last night that the latest wtfos root will work on the latest v2 firmware now. Is that correct? Blunty said it was a huge break for wtf!

@OneManUnmanned Год назад

That's correct. I think Blunty announced it first on Facebook then on the news with JB. I think it's called "Butter" and allows firmware rollback even if you're beyond the point of a certain firmware number. I'll link it below. github.com/fpv-wtf/butter

@WarriorLife_fpv Год назад

@@OneManUnmanned oh shit, I’m on it like a bonnet, brother!!! When I first got my v2 goggles back in September I wasn’t at the point where I felt comfortable rooting before I set up my avata and goggles. Thanks for making these important videos. I’m a noob to fpv and it really helps. I did my first acro flight on October 6th and haven’t looked back!

@WarriorLife_fpv Год назад

@@OneManUnmanned done deal! It took me a while to figure out. I’m not super tech savvy presently. But I got it done, did the fcc hack, canvas mode, and all the goodies and I’m back on 1.002.002 or whatever the good firmware is! The part I struggled with, and I’ve never heard anyone mention, is that the goggles need to be connected via a usb-c to regular old school usb in order for the goggles to be recognized by wtfos. Once I used the proper cable it was a snap! Thanks for the help!!!

@OneManUnmanned Год назад

This is awesome advice, and I'm glad you shared your experiences. It's Good to know "Butter" works.

@WarriorLife_fpv Год назад

@@OneManUnmanned so I guess now I have to re-bind everything through the fly app or do I do it on DJI Assistant 2? I totally didn’t think about that and went out to fly at sunset before our snowstorm hits. That was dumb of me lol. I had just gotten back from taking care of some business at the VA hospital and was really needing a good rip hahaha.

@RizHassan Год назад

I have the DJI-FPV-drone, Remote, and V2 goggles combo as well as Caddx Vista and DJI air units. If I root my goggles, will I still be able to use my DJI-FPV-drone and controller? If not, what firmware I need to install on my DJI-FPV-Drone and Controller so its compatible with all the airunits and FPV-Drone and controller?

@OneManUnmanned Год назад

Yes, If you Root your goggles, you can still use your FPV drone, remote, and Vistas/Air Units.

@RizHassan Год назад

@@OneManUnmanned Is your tutorial post Butters or prior to Butters release? BTW great tutorial, I am liking your content?

@OneManUnmanned Год назад

Sorry Riz, I did not see your reply. This video was made a week before Butter released. With Butter, there's no way to "brick" or lock-out your V2 goggles, even if you're on the latest fimware.

@javiermiranda3776 5 месяцев назад

Does it work with betaflight 4.2.0???

@OneManUnmanned 4 месяца назад

I think it does.. As long as your using the original Air Unit or Vista, and it’s Rooted with WTF Operating System.

@MatthewTaylor3 Год назад

I made the mistake of starting off at the latest firmware beyond what was shown earlier. Both devices are rooted with WTFOS installed, but they won't pair. I guess I'll have to wait months for someoene to release a fix for this. I can't downgrade or upgrade in DJI Assistant 2 (FPV Series) as it

@OneManUnmanned Год назад

You're lucky man..A fix for this was just announced a few days ago. It's called "Butter" and it's on their github page. I'll link it below so you can check it out. github.com/fpv-wtf/butter

@MatthewTaylor3 Год назад

@@OneManUnmanned I forgot to thank you for providing this link so quickly. I was able to restore my V1 goggles and two air units, so I could successfully root, install WTFOS (with packages) in a few minutes after you posted the link. I'm going to do a test flight shortly. to see what's what

@OneManUnmanned Год назад

No prob, man. I'm glad you got it working.

@Saruul_osman Год назад

Goggles v2 rooted and air unite (lite). But why some of the osd won’t show up when i try to pun some elements on osd tab? But i can see other elemts such as vbat, mah, somehow other elements won’t show up. Could you tell me why it feels like i’ve only half hacked my gear?

@OneManUnmanned Год назад

I don't think it's half rooted. I don't know why it would be doing that, but recheck your betaflight settings, your CLI commands, and you're in the right NTSC or PAL settings.

@Saruul_osman Год назад

@@OneManUnmanned thanks man. I got it fixed already. Accidentally activate second msp on ports tab. 😅

@OneManUnmanned Год назад

Awsome

@KwaddawK Год назад

Apparently there is a new wtf hack that allows you to change the location and fonts of the DJI information on screen.

@OneManUnmanned Год назад

Thanks man, I'll look into it.

@popeye7833 Год назад

Does it release aux in ?

@OneManUnmanned 11 месяцев назад

DJI V2 does have an analog input.

@popeye7833 11 месяцев назад

@@OneManUnmanned yes but i don't have it in my menu Aux/in FW 1.02.00.00, i connect a signal directly but nothing happen

@timmytson1 Год назад

So is this not the butter hack ?

@OneManUnmanned Год назад

This is not the Butter hack. You would be doing the "Butter hack" to enable/allow your goggles to do this hack.

@timmytson1 Год назад

@@OneManUnmanned yeah I got mine on 0015 fpv mode so I believe I need that

@weerobot Год назад

WTF....

@OneManUnmanned Год назад

Yepp..

@JDDupuy Год назад

Your video is already outdated!

@OneManUnmanned Год назад

That's how fast things change in this hobby!

@stickboyfpv4742 Год назад

How so?! I have the v2's onthe way and a vista...! Just hopinggg to get it alll working together asap😬😬🤗 Which firmware should I use? Any tips guys? Thanks!

@OneManUnmanned Год назад

The video should still work for you. I think the outdated info pertains to the fact that I mention some air units can't be rolled back to an older firmware. Any Air Unit can now be rolled back with the "butter" firmware.

@johnrosner8964 Год назад

You can go in the presets and choose HD Zero VTX. And it will do it for you

@OneManUnmanned Год назад

Good tip and advice instead of typing the CLI commands. I've done that on my Tinywhoop build. The only caveat is that you need to be in BetaFlight 4.3 or later to use presets. Alot of drones are not on 4.3, therfore they'll need to type it in the CLI.

@Seii-FPV Год назад

@@OneManUnmanned - and in my humble opinion, it's always better to know and understand those commands, rather than getting everything "packaged" inside those presets. I don't know, maybe it's just me, but I love entering those CLI commands. It's from my early, 8-bit computer days back in 80s :)