Ghostbusters Proton Pack Build!

Подписаться 729 тыс.

Просмотров 531 тыс.

50% 1

Be one of the first 500 people to click this link and get a 2 month FREE trial on SkillShare: skl.sh/punishedprops2
My buddy Garrick came to visit and helped me make my very own Proton Pack from scratch! This was a TON of fun and I'm so excited to own one of these amazing props.
LINKS:
Garrick Backer - KnowOne's Designs
Website knowonesdesigns.com/
Group Projects horsemenof.com/
Ghost Busters Fan Site
www.gbfans.com/
Support us on Patreon!
/ punishedprops
TOOLS & MATERIALS:
A.L.I.C.E. BackPack Frame - Amazon
amzn.to/30xhhcT
Proton Pack Kits
knowonesdesigns.com/shop/
ABS Plastic - Amazon
amzn.to/2FUdSa9
Scissors - Amazon
amzn.to/2WIBFR0
Fiberglass Cut Off Wheels - Amazon
amzn.to/2I0ZfFh
Super Glue - Amazon
amzn.to/1y8ynly
Super Glue Accelerant - Amazon
amzn.to/1Cu5w1L
Tiny Squeeze Bottles - Amazon
amzn.to/2j3XFI3
Latex-Free Gloves - Amazon
amzn.to/2AgSLzf
EpoxAmite 100 Epoxy Resin - Smooth-On
www.smooth-on.com/products/ep...
Fiberglass cloth - Amazon
amzn.to/2aN8kNm
Urefil 9 - Smooth-On
www.smooth-on.com/products/ur...
Respirators - Amazon
amzn.to/1zJnYks
6001 Filters - Amazon
amzn.to/2T65fi9
Masking Tape - Amazon
amzn.to/2mDrgE5
Truck Bed Lining - Habor Freight
www.harborfreight.com/16-12-o...
Forstner Bits - Amazon
amzn.to/2nkr4iD
Step Drill Bits + Center Punch - Amazon
amzn.to/2TYGbJp
Drill Bits - Amazon
amzn.to/2I02tZJ
Digital Calipers - Amazon
amzn.to/2yA4pAE
White Marker - Amazon
amzn.to/2MWLCtT
Extra Long Drill Bit - Amazon
amzn.to/2UmxRs7
Dixie Cup Holder - eBay
www.ebay.com/itm/Vhook-substi...
Drill Press - Amazon
amzn.to/2BGhiul
Threaded Insert - Amazon
amzn.to/2WI2Rzs
T-Handle Hex Allen Wrenches - Amazon
amzn.to/2AptCyF
Screws & bolts:
Pan Head Self-Tapping Screws - Amazon
amzn.to/2I2TNC1
Screw & Washer Kit - Amazon
amzn.to/2DbaQ0L
Fender Washers - Amazon
amzn.to/2IbPXWt
Red/blue Plexiglass - Amazon
amzn.to/2Uzbm29
High Temp Hot glue - Amazon
amzn.to/2IgYozJ
5-Minute epoxy - Amazon
amzn.to/1JQNtVH
Acid Brushes - Amazon
amzn.to/2EGjE0y
Createx Airbrush Paint - Amazon
amzn.to/2lAZZD6
Golden Airbrush Acrylics - Amazon
amzn.to/2KbiNJ9
Vallejo Paint - Amazon
amzn.to/2G3L0xp
ALICE Pack frame - Amazon
amzn.to/2FXtJo7
PVC Caps - Amazon
amzn.to/2I46RH1
Liquid Electrical Tape - Amazon
amzn.to/2I1MNoQ
EVA Foam, 6mm - TNT Cosplay Supply
tntcosplaysupply.com/product/...
Tap Bits - Amazon
amzn.to/2OSJsJa
Plumber's Epoxy - Amazon
amzn.to/2OZwzgR
Spectra Strip Ribbon Cable - Etsy
www.etsy.com/listing/64626232...
Proton Pack Tubing - eBay
www.ebay.com/itm/Tubing-Red-b...
Liquitex Heavy Body Acrylic - Amazon
amzn.to/1MMZ1Zg
ELECTRONICS:
Battery Pack - Amazon
amzn.to/2G2vNN8
Speaker - Amazon
amzn.to/2FZhtDE
Push Button Switch - Amazon
amzn.to/2OQZnbc
Micro:bit - Amazon
amzn.to/2WUmfcJ
Sparkfun Micro:bit Breakout - Amazon
amzn.to/2FSj9ip
Toggle Switch - Amazon
amzn.to/2FSHEMw
Step Down Module - Amazon
amzn.to/2UzSTTc
Leads
Red - Amazon
amzn.to/2UzSTTc
Black - Amazon
amzn.to/2IhOzlg
LEDs (Square) - Amazon
amzn.to/2G3qE7m
Soldering Iron - Amazon
amzn.to/2iIVA08
Heat Shrink Tubing - Amazon
amzn.to/2ORzs36
Bundled wire - Fry's
Amplified Sound Board - GBFans
www.gbfans.com/shop/electroni...
Multimeter - Amazon
amzn.to/2CYvSzx
Bar graph - eBay
www.ebay.com/itm/253204495707...
Punished Props Mission: Transforming passionate fans into confident, skillful makers. Find out more at www.punishedprops.com
We release new videos every month!
Fun ways to help our channel:
Join the Extra Credit Club! punishedprops.com/extra-credi...
Buy our books! www.punishedprops.com/shop
Share your projects with us on twitter!
/ chinbeard
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Хобби

Опубликовано:

7 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 769

@punishedprops 5 лет назад

See the full tools & Materials list plus bonus photos on our website! punishedprops.com/2019/04/08/full-proton-pack/

@spunkmeyer43 5 лет назад

Guys I love your channel but since the move I've found myself barely watching... i honestly think you need more EVA foam builds like you were doing... they are much more attainable by shit munchers like myself... I like the other vids but they are what got me hooked...

@babylonfive 5 лет назад

I don't see the metalized stickers anywhere... did I miss 'em?

@punishedprops 5 лет назад

Garrick prints them on his inkjet printer using these sheets: amzn.to/2I4yjoh

@travissmith5994 5 лет назад

Is there a better description than "bundled wire" for the wiring you used for the wand? I've been searching for bundle of wire like that but I can't seem to find the right words to get it to come up in an Amazon search

@ChunkyLover53 5 лет назад

Any chance you guys will be fixing up the Ecto Goggles from Spirit?

@lopaka76 4 года назад

It's nice to see Ray and Egon's kids getting along and following in their dad's work. Lol

@MeleeTiger 5 лет назад

That kids is why you always clean and empty your traps when done busting, remember! If the light's green, the traps clean.

@shawnjenk5614 5 лет назад

If it's red go to bed

@Dargonhuman 4 года назад

Yes, but what about the Twinkie?

@thenerddirector 4 года назад

The magic word: please

@TheEctoFreak 3 года назад

@@Dargonhuman what about the Twinkie?!

@Dargonhuman 3 года назад

@@TheEctoFreak Okay, the combination of your screen name and pfp made that reply extra funny. Also, "Man that is one big Twinkie..."

@markstokes8818 5 лет назад

I'm not being funny but to make something like that and then to stand back and see what you've made it must be so satisfying

@punishedprops 5 лет назад

It really, really is.

@SKSProps 5 лет назад

Friends doing awesome things! Great job guys!

@punishedprops 5 лет назад

Thanks Steve!

@Darktoast20 5 лет назад

It's not a build until you add 80s montage music.

@punishedprops 5 лет назад

Truth.

@JohnMcRIS 5 лет назад

Cool video.Could you please name the track at 43:00?It’s amazing!

@sashok2505 5 лет назад

@@JohnMcRIS Atomiks Feat Taylor Dahlia -- Chemistry

@JohnMcRIS 5 лет назад

@@sashok2505 Thanks!

@joewaltz2709 4 года назад

Punished Props Academy are these available to buy

@DaneShobe 5 лет назад

This is going to be extremely helpful when I finally start my build. I've been amassing parts for years, but I've never seen any video that's as step-by-step as this. I'm glad I've waited!

@felixthecrazy 5 лет назад

Seems like it would make life a LOT easier to have handles integrated into the undersides of the blanks to aid in removal. Also alignment pins for bucks an risers.

@wadekirby8575 5 лет назад

If I get into vacuum forming things flush folding handles and alignment pins will definitely be incorporated into the bucks and risers. :)

@mspeilberg 4 года назад

Who dislikes this video? These guys worked so hard for what seems like a couple days to make this awesome replica proton pack. If you disliked this video or videos like this in general, maybe you should look in the mirror and question your life. Anyway, great job guys!

@punishedprops 4 года назад

Thanks!

@markdillow1677 4 года назад

mspeilberg ya you’re right maybe I should waste my life building a toy two unless I have other responsibilities that habit me for doing such ow that right I I wanted one when I was like seven years old but I am a grown-up and you know what people have choices to make they can waste their time away their money but my time is not free it cost you every breath in your lungs and one of the days when you wake up you might realize that instead of wasting your time building a proton pack from a movie premiere childhood days that’s the problem with the world today we care more about the past and not really about the future I think all the good that we could do if instead of wasting time building fake proton pack we put our efforts into saving the ocean or helping a neighbor

@mspeilberg 4 года назад

@@markdillow1677 Bro....I think you need to see someone professionally. I mean that in the most positive way. If this is getting to you, you may need help.

@Saintbow 4 года назад

@@markdillow1677 Let me get this right...You watched a 48 min video on how to make a proton pack prop...Just so you can trash everyone who watched a 48 min video on how to make a proton pack prop for their hobby...Because they rather spend their time building something, be it with their wife/gf/husband/bf/sex robot/it...and then put it in a display case, up on the wall or use it for a costume for a convention or Halloween around the corner. The time is spent being constructive versus going out and getting drunk, or doing drugs, or walking into walmart and licking ice cream...whatever your kind does that is extremely stupid...I mean, you did upgrade from Tide pods to licking ice cream, so...it's a start... And now you are lecturing people on how they should spend their time? This hobby is not about the past, this is about building something with your hands. This is about the enjoyment of doing something. Most folks would just buy it, but the folks that are watching this video are the ones who are going to forge ahead and make it themselves because they want to see if they can. They are like blacksmiths, or bakers. The should be applauded for the moxy to have the skill set and the ability to work with there hands. You are a sad little person.

@neilmendrico5262 4 года назад

Mark Dillow well it seems that like your life is a tragedy, judging other people because of their passion and hobby and calling it a waste of time. Maybe you should spend yours on getting your sh*t together and reflect on your crappy mindset.

@keithpetrino 4 года назад

amazing how much work goes into recreating something that was probably originally designed around whatever random crap they could scrape together.

@nj4x4fever2 5 лет назад

This has been a truly an amazing build. Fantastic job to you all.

@padraicmcgraw 5 лет назад

I enjoy that this channel does a "cold open" in every video. It's SNL meets maker content.

@punishedprops 5 лет назад

It's just so much more fun!

@wolverine8425 4 года назад

All the stickers and finishing touches really bring it together.

@RebelMerc 5 лет назад

I worked for a vacuum forming company and a few tricks you might use to make your work easier is for dowel your buck plate to your form. This keeps it from shifting. Second since you are using a buck plate set up a router table that has the cutting head at the exact height as the buck plate. Then you trim off any of the abs sheet with a sheer table of other tool then you simply use the router table to trim the part down. You can make a simple router type table but use a grinder attatched to a table where the blade is protected by a shield until you move the formed abs part into it. Hope this helps.

@punishedprops 5 лет назад

Great suggestions!

@coregeek 5 лет назад

Woohoo! Proton packs rock! This was such a fun build to watch! Way to go team!

@punishedprops 5 лет назад

Thanks Eric!

@chrisadams628 5 лет назад

This was an incredible build. I love these long format vids too.

@itsagundam79 5 лет назад

Man, i love it when the items i use show up in a video & i hadn't gotten a suggestion to use it from a parts list. Those tri-corner beakers are fantastic for resin mixing!

@mattdavis9642 5 лет назад

I love the sound of the rotary tool first cutting! I can think of several sound effects to use for with little or no manipulation.

@Dragnmastralex 5 лет назад

for the 4 blinking red lights... I would have lined the cones with reflective foil so the LED's would give off a more even and brighter light.

@prodestrian 5 лет назад

I think flat LEDs was a poor choice here, you can see the fourth LED is misaligned when the lights are flashing. With round LEDs it wouldn't have been an issue. I'm probably going to go with an 8mm LED per Cyclotron light, and line the interior with foil tape. Hoping to somewhat recreate the old incandescent bulbs they would have used in the film! 😊

@verdant2215 3 года назад

I used a screen door mesh and caps painted black to give it a deep look

@thatoldcomicsmell 6 месяцев назад

That vacuforming is super satisifying..I could watch that all day LOL

@splatcat3434 5 лет назад

I was running through the YT playlist while laying in bed when this vid popped on. I was dozing, slipping in and out of sleep, dreaming. What a crazy dream you guys helped to create. We were in a spaceship made from cardboard, hot glue, and LEDs powered by cardboard batteries. At one point I realised that our technology had improved because we started to connect all the LEDs to the cardboard batteries using wires rather than strings of hot glue. Trippy

@lynnswinburne1072 2 года назад

the reason I think it is SOO GOOD is because I am a Ghostbusters fan

@hartdanielseq3691 5 лет назад

It’s one of my favorite things to see when you put up a new video and it makes me even happier to see that it’s a longer video also. Keep up the amazing work!

@punishedprops 5 лет назад

Thanks so much!

@deadpoetiq 5 лет назад

So stoked you FINALLY got a proton pack build! Great vid as always guys, gonna be re-doing my own build and will take away some pointers from this. love it

@WorkingHandsMakingStuff 5 лет назад

Well that's the best hour of RU-vid I'll see this week!

@punishedprops 5 лет назад

Thank you so much!

@jonaheaster7920 5 лет назад

So glad you finally finished it! I've been working on mine for a while now and will hopefully have it done before Heroes Con Charlotte

@HrafnNordhri 5 лет назад

When I clicked this.. I was REALLY hoping you built from scratch... That would have been great to see. Nothing wrong with a kit.. but I really wanted to see you build from scratch.

@tomc8157 5 лет назад

Not many folks have the skills to build from scratch anymore. Too time consuming. Cheap, but whats everyone's time worth? I built one from scratch, hand made every single part and took me about 6 months. Used plans from GB fans and had at it. First ever project I made, with sound and lights oh my. Looks spot on comparable to the $$ kits you can buy, BUT , its still a POS compared to the "kits", according to most people who spend oodles of money on them as I found out.

@HrafnNordhri 5 лет назад

@@tomc8157 I understand and I'm not one to pack shame.. kits, pre-bought or self made.. all great. But, Bill is a prop builder.. he's done some amazing things from scratch. I just really would have loved maybe a small series from him building from scratch and allowing us to see his process.. as he's done in the past. I love this channel and I own some of his books. So I wasn't trying to pack shame or even complain really... just.. I dunno.. Bill could do some amazing mods on his like that dude with the vape smoke.

@jimpiazza4264 5 лет назад

Very cool build, you guys! Fun to watch.

@alias555aka 5 лет назад

Even though I might never make this, there was still a lot to learn. And amazing job from both Bill and Garrick to make the Proton Pack look so good at the end.

@punishedprops 5 лет назад

So glad you enjoyed the video!

@erenhall7361 5 лет назад

Learning how to use circuit boards and microchips and all that fancy stuff tomorrow in my kinetics class! This video could not be better timed! I had to wire some motors up a few weeks ago for the first time and your tutorials on LED soldering really saved my butt, thanks for all the help! Keep up the good work

@punishedprops 5 лет назад

That's fantastic! So happy to help :)

@jqpublic3104 2 года назад

Simply wonderful!

@matfry2310 5 лет назад

Awesome project guys, love the content. Keep um coming!

@forby_ 5 лет назад

Fantastic build, great work guys!

@Alientek2044 5 лет назад

Fantastic build Bill, so want one now! Keep them coming

@JayDoscher 5 лет назад

Watching this has been a blast! It's easily the best video I've seen in a while. I ended up watching it over 3 days and enjoyed it all. Thank you!

@punishedprops 5 лет назад

Thanks very much!

@squeedles_1943 5 лет назад

THAT WAS AWESOME! I wasn't expecting to watch all of it since I'm not too big a Ghostbusters fan, but dang I was hooked. Garrick guy's shirt was unexpected and awesome, and you all worked great together!!

@punishedprops 5 лет назад

Thanks so much! Its such a fascinating process, it's hard not to get invested isn't it?

@ThatEngin3rd 5 лет назад

I'm glad to see that Garrick comes Jonny Ruckus approved.

@TheSmugglersRoom 5 лет назад

OH MAN!!! I have been waiting for you to build one of these bad boys for years Bill, fantastic! Love the little intro bit by the way . . . hilarious!

@punishedprops 5 лет назад

Thanks so much!

@carlosmolina6415 2 года назад

Woo hoo!! You guys rock!!

@lucas2002D 5 лет назад

Love the ALICE PACK i have the A.L.I.C.E LARGE PACK and use it ALOT

@KazDubyew 5 лет назад

I love all the bits they put in these videos. Bill seems like a fun guy :)

@punishedprops 5 лет назад

Aww thanks!

@matt34dogify 5 лет назад

These videos always get me inspired to start a new project!!

@punishedprops 5 лет назад

Wonderful!

@justquality1118 5 лет назад

These guys are great! They make it seem so easy

@theghostisdead 4 года назад

Man... I learn so much from all your episodes! Super inspiring 💪

@punishedprops 4 года назад

That's so fantastic to hear!

@mrzon9344 5 лет назад

Great work. Have you tried cutting the plastics(abs) with a oscilating tool? I have hear you mention MEK before, MEK disolves ABS so you can make a 'welding' paste/liquid by disolving waste abs with MEK, just be well ventilated when using MEK. it takes a long time to cure but effectivly welds the ABS together. When making bucks for vac forming we used to make the taller than required and put a score line around it to make a trim line in the form. Negative moulds/bucks can give you sharper lines (like for the shallow disk with the 4 red lights. also easier to get out as ABS shrinks.Can also use baby powder to help release.and blowing air through the vac holes can 'pop' the buck out.

@benvoliothefirst 2 года назад

If I can be honest, I am both awed by the amount of time, effort, and talent you put in, and also completely overwhelmed. I would just buy one. It would take me a decade to do all this work in what little free time I have. I'm being generous.

@axeltheredpanda 5 лет назад

Prop designers hate him! See how this man built a ghost busters proton pack in just FIVE DAYS

@ChrisKurtz 5 лет назад

Great job, guys! Glad some of my general ideas were helpful to Garrick's plans!

@punishedprops 5 лет назад

Thanks very much!

@KnowOnesDesigns 5 лет назад

Thanks for being one of my early customers! Your feedback really did help!

@Brett_is_Veng 5 лет назад

awesome job, i love the colour you used for the finished piece, now im motivated to start my journey to create cool stuff like this too

@punishedprops 5 лет назад

Thank you so much, that's wonderful!

@JohnClark-tt2bl 5 лет назад

The kid in me is clawing to get at that. I had one of the toy packs as a kid, and man is yours awesome.

@nerdyviews 5 лет назад

Yay! Super fun to watch that awesome build! I may have to bring my gear next Emerald City... ;)

@jordongingrich8913 5 лет назад

Great, thanks Bill, now i need one of these!!

@TheMidnightSmith 5 лет назад

The level of detail that went into this is INSANE! That is some legit prop making right there! Great job y'all! I can't wait to have a shop of my own someday!

@punishedprops 5 лет назад

Thank you so much!

@VicOrlando 5 лет назад

Super bad ass build!! One of the hardest things I ever built but I couldn't afford the details. So much fun!

@from1978 5 лет назад

I remember Bills "weld look" with a 3D printer pen, worked well!

@hallie6921 5 лет назад

from1978 I was thinking the same.

@dragonsarrow163 4 года назад

Ditto

@SpaceWizardCosplay 4 года назад

Hot glue also works well and looks more realistic, IMHO. That's what I used on my homemade pack which I made out of corrugated cardboard back in 2015. I still have the pack and it looks as good as when I made it.

@twitte0king 5 лет назад

The vacuum forming is so satisfyingl

@kearnsey64 2 года назад

AWESOME!!! Always wanted one.

@punishedprops 2 года назад

Right? Me too, so exciting to finally have it!

@Hvitserk67 5 лет назад

This is just a fantastic project. I like the approach to details and, not least, simplifications so that the Proton Pack can be more easily constructed. Everything is about having fun when you are doing it. Keep up the good work :)

@punishedprops 5 лет назад

Thanks so much! I'm so glad you enjoyed the video!

@samaker4 5 лет назад

Aaa, work. I can watch it for hours :) Epic build guys!

@GWHPhoto 4 года назад

OMG. You guys went way out there in making this. I love it.

@punishedprops 4 года назад

Thanks!

@maxmairena6021 5 лет назад

That is freaking awesome! 👍🏼

@-MrFozzy- 5 лет назад

That’s an outrageous amount of work...but it’s a lovely prop....amazing and helpful video as always

@punishedprops 5 лет назад

Glad you enjoyed it!

@GenX4ever 3 года назад

Seriously incredible build. I want one! Cheers

@punishedprops 3 года назад

Thank you very much!

@Mcfet5 5 лет назад

Well worth the effort. Look awesome!

@punishedprops 5 лет назад

Thanks very much!

@tompadfoot3065 4 года назад

this is rad as hell

@spagamoto 5 лет назад

Garrick seems like a cool person. Humble yet knowledgeable, and eager to teach.

@KnowOnesDesigns 5 лет назад

Aww you're too kind.

@Dark.Shingo 5 лет назад

This isn't a build or a movie replica. This is a work of art!

@prodestrian 5 лет назад

Oh! I'm building one right now too, this is great timing! 😃

@prodestrian 5 лет назад

That superglue "welding" technique is exactly what I was looking for, I'm a week or two away from attaching the handles to the Wand and this is going to make a huge difference!

@KnowOnesDesigns 5 лет назад

prodestrian glad to help! I used it on some of the tube caps a well, then went back and sanded it down. Makes it look like a grinded weld

@bretstearns8083 5 лет назад

For future vaccuforms, you need to add a slight draft angle. things in movies may look 90° but are actually 91°-92.5°. Just feather a little of your favorite body filler and taper along the faces.

@sophiekuijper5394 5 лет назад

So cool!

@chadiwack 4 года назад

This video is amazing. So fascinating. I didn't skip a thing. Props (pun intended) to your editor and camera person. Very very professionally crafted and I make legit tv commercials lol. Subbed and liked. Looking forward to seeing more.

@punishedprops 4 года назад

Thanks so much! We're glad you enjoy our work!

@hajihunterr7662 5 лет назад

So COOL!!

@mlixelplix 5 лет назад

Amazing job on the build and great video!

@punishedprops 5 лет назад

Thanks very much!

@ghostbustersquickresponseu5159 5 лет назад

Thank you for not cutting this up into separate videos. As a fellow proton pack owner it's great to watch it come together start to finish! There's nothing like walking a con with one of theses on. Enjoy it sir. Also weigh your pack. The most asked question is "How much does your pack weigh?"

@punishedprops 5 лет назад

Sp glad you enjoyed the video!

@reallydumbforeal1 4 года назад

this is awesome. its amazing seeing how much work goes into these. that's why the good fully-built packs you see for sale are $800-2000 i guess

@punishedprops 4 года назад

Totally!

@lynnswinburne1072 2 года назад

ITS SOO GOOD

@gmpnj29 5 лет назад

Wow! That’s awesome. Nice work gentlemen. I wish I had that.

@punishedprops 5 лет назад

Thanks very much!

@indiansu2 4 года назад

Guys, what a fantastic vid! Someday I'll be able to do this, hopefully, but your knowledge of tools and materials was great....a little intimidating, but very well done. Thank you for this vid! WOW!

@justincosplay 5 лет назад

so amazing...this gives me so much appreciation for proton packs !!!

@punishedprops 5 лет назад

Pretty amazing process huh?

@BajaTym 5 лет назад

Great video, I appreciate you sharing your skills! It had never occurred to me to fiberglass reenforce a vacuformed pull... it’s so obvious and simple, yet completely outside “my view” of common sense. 😎👍

@venom82mlc 4 года назад

So badass! 👍👍

@Gollammeister 4 года назад

Very cool build well done

@punishedprops 4 года назад

Thanks so much!

@ruudhooff6486 5 лет назад

Everybody needs a proton pack! Great build.

@punishedprops 5 лет назад

Thanks!

@405andrewt 4 года назад

Freaking Amazing!!! Awesome work my man!

@punishedprops 4 года назад

Thanks so much!

@vd342 5 лет назад

That initial form was so clean

@daimyo2k 3 года назад

I've never seen the screwdriver thing, pressing on the form. I have and was taught (and works really well) to just use a mildly damp wadded up paper towel. The burnishing wheel on the corners... awesome idea, never thought of that. Thanks for sharing =]

@mikealbers1175 5 лет назад

Ahhh Fry's. One of the few things I wish would have more stores on the east coast.

@KEN_of_BORG 3 года назад

So awesome!!!! I wish could have one!

@punishedprops 3 года назад

Thanks for watching!

@paulfuryes203 5 лет назад

Excellent work guys.

@punishedprops 5 лет назад

Thanks so much!

@WF3D 5 лет назад

Nice job as always!

@punishedprops 5 лет назад

Thanks!

@crazietj 5 лет назад

Fantastic build! I made a juck pack several years ago, and been thinking of building a new pack!

@punishedprops 5 лет назад

Right on! Glad you enjoyed the video!

@Broadshore 5 лет назад

My Favorite line from Ghostbusters 2. *Who you gonna call.!!!* And the children run around crying out *He-man! He-Man! He-Man!* Look at your pack and looking at my Spirit Holloweves Protopack. The Spirit one is totally off scale. Plus! Love what you guys did with your build! A+!

@gorillaau 4 года назад

"And it don't look good."

@frankentrooper 5 лет назад

Brilliant!!! Thanks!!!

@Psychlist1972 5 лет назад

Cool build!

@MrDunvegandunvegan 5 лет назад

You can also use ABS slurry for gluing and filling just like with 3d printed ABS. It will be a much stronger bond than superglue or resin.

@lapseevident3132 4 года назад

Very well done!!!!! Nice!!!!!

@punishedprops 4 года назад

Thank you so much!

@ZerocoolsPropsandCollectibles 6 месяцев назад

Have watched a few times awesome vid Bill coming from another Bill.

@johnnysokko2565 5 лет назад

I've been working on a 3d printed pack. Designed for 3d printing and shelled for all the electronics. I did all the design work in Fusion from Otto's plans. It cost me $40 in filament to print it.