Glock 25 cent Trigger Job Tutorial: Best DIY tips for beginners

Подписаться 6 тыс.

Просмотров 172 тыс.

50% 1

Shooter Lube Deal at bottom:
Link to polish below:
amzn.to/3fzSo5S
*************************
Link to polishing tips below:
amzn.to/33JtLzS
***************************
Link for Stylo Dremel :
amzn.to/31JwzZr
**************************
Link to Camera Tripod: amzn.to/3sKVRBu
************************
Link to my favorite EDC belt:
amzn.to/3viPfMq
**********************
Best bang for your buck EDC Kydex Holster IWB with wide clip and side concealment claw.(Must haves)
amzn.to/3rdV39p
Exclusive Shooter Lube Deal:
Hit the link below with the use of my promo code "Cyclone" for 10% off some of the best Gun Lube gear in the game offered by Shooter lube, proudly made in the USA. spend over $35 to qualify for free shipping:
www.shooterlube.com?afmc=21&
10% off Promo Code: "Cyclone"
Disclaimer: Using any of these links provided above can help me earn a small commission without adding any extra cost to you at all. This simply helps support the channel to create and improve more videos for my viewers.
Thank you. -Drew
Artist and Editor of Cyclone Gunworks Brand
Dont forget to polish the rails on your frame. Might be a good time to polish the feed ramp on your barrel too. Also I like to clean up parts with any oil lube and then wipe them down thoroughly before reinstalling them.

Опубликовано:

21 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@CycloneGunworks 3 года назад

Don't forget to polish your frame rails as well.👌

@darthskywalker2467 7 месяцев назад

Never tried that . Might do this

@CycloneGunworks 7 месяцев назад

@darthskywalker2467 takes 2 sec on the rails part.👌

@joshvan3299 Год назад

Love how u point everything out with punch

@indyglf Год назад

I’ve done this to my 3 Glocks. The trigger bar and connector look brilliant, but I don’t notice any difference in the trigger pull. However, if it’s a weekend and the only thing on tv is the WNBA, yeah go for it. I consider it regular maintenance on a firearm, but not that necessary. I know many of you are detail oriented, engineering types who are fussy about such things. If this makes you happy, I am all for it.

@Wordisbondo 3 года назад

Thank you for taking the time to do this. Very informative and the end result when I followed your instructions was top shelf. Amazing!

@CycloneGunworks 3 года назад

Thank you, so very glad to hear I helped out another supporter.

@12gaFreedom 2 года назад

This video is amazing. Thank you. I needed exactly this while building my first glock.

@Kensh1D Год назад

Nice tutorial. Worked out well. Thanks for taking the time to put this together.

@CycloneGunworks Год назад

No problem, you're very welcome

@Ben-lo7cy Год назад

Super well spoken tutorial. I shoot a good bit but don’t really add a bunch of stuff to pistols but I’ve been thinking about doing this

@CycloneGunworks Год назад

Thank you for the compliment bud

@thehonkening 3 года назад

Awesome trigger job, did it just like you did, did three Glocks with it I love how it worked, made my Gem 5 G17 trigger like butter, did my Gen4 G26 and the reset is perfect, even my Gen 2 G17 trigger smooth out, even more, Love it, thanks for putting it out. Chreers

@CycloneGunworks 3 года назад

Good stuff man. Makes cleaning a lot easier too

@shahreyaralam1019 Год назад

That's means one does not replace anything and without compromising your Glocks dependibility u get an amazing trigger . Am I right?. I don't want to put after market parts in my Glock.

@CycloneGunworks Год назад

Yes, that is correct. It simulates the natural wear of a few thousand rounds through a finely broke in glock. It also makes your internals VERY easy to clean carbon off of.

@HenAndPenn 2 года назад

Amazing mirror finish. Great video thanks

@gunsandcommissions 3 года назад

This is an excellent video. There’s another video that pops up ahead of this one when you search 25 cent glock trigger job and the dude doesn’t even polish half of the mating surfaces and instead polishes random spots. He even polished the wrong end of the safety plunger that goes against the spring inside of the slide as opposed to the side you show that actually interfaces with the trigger bar. I know these videos take way more work than it appears, so I appreciate you taking the time to do this.

@CycloneGunworks 3 года назад

Thanks you a bunch. I appreciate the support.

@timr3191 3 года назад

Agreed sir

@johnochicago8457 4 месяца назад

I'm going to watch this several times before I try it. I also need a Dremel. Thank you very much!!!!

@Dnballznyajawz 4 месяца назад

you can do the same with your hands and a rag, just takes more finesse

@TheEndtime60 4 года назад

Very cool Channel bro! And love the music. Looking forward to more of your videos👍

@CycloneGunworks 4 года назад

Thanks. Much appreciated

@CycloneGunworks 3 года назад

You see my last few videos? I just put up a a few epic Tutorials in the past month or so with all my tool product links attached in description 👍

@caseykuntz5249 2 года назад

I have found that diamond polishing paste works really well. It's available in a lot of different grits up to 200,000 and you can get an absolutely amazing finish

@CycloneGunworks 2 года назад

Yep I also use jeweler's rouge sometimes, just depend how you do your stages.

@caseykuntz5249 2 года назад

@@CycloneGunworks I might have to try that next time.

@vtxdaryl 2 месяца назад

Great tutorial, it’s a reminder, when you buy a new Glock to polish every metal to metal component. I love doing it and it dirty parts can be wiped of with a cloth and it will look like chrome again. Years ago I used to polish my slide release, it comes out chrome looking and the pins that hold the pistol together. You can polish every metal part, even the springs.

@kaedonfa9078 3 года назад

Very informational video my guy! If anyones butchers this, it’s because they didn’t pay attention 💯

@CycloneGunworks 3 года назад

Exactly , thanks man. I purposely avoided any mods or shaping work that hs a chance of compromising components. With that being sad I am working on a more advanced video right now for people who want to have their metal contact points even more refined by safely shaping them using a wet stone and a little bit of different polishing methods. Not for beginners but ill be sure to explained the risks vs rewards for all mi DIYers out there. I appreciate your support and make sure you subscribe w/ notifications. Not gonna get a ton of bell sounds from me but you don't wanna miss the good videos here and there.

@irafowlerjr.7492 2 года назад

Helpful info, thanks

@tripplebeards3427 2 года назад

Just did a polish job on my brand new, unfired , Glock’s trigger parts. It now brakes at actual 3.5 pounds. It was so heavy before I started that it bottomed out my 4.5 pound scale and kept pulling so I don’t know how heavy it was to begin with. I would have to say it was around 5.5 pounds to start with if I had to guess.

@CycloneGunworks 2 года назад

Love it, that's awesome. Usually they do start at 5.5

@RoostedFilms 2 года назад

Great vid thanks

@ThePatriotParadox 3 года назад

NICs work, I always go through these steps when first getting any Glock or Glock style pistol.

@j.p.4541 3 года назад

Thank you for a fantastic tutorial, definitely what I was looking for. Beginner question, do you stop when it’s shiny as not to remove too much material?

@CycloneGunworks 3 года назад

With mothers mag you won't harm anything. I usually get it to where it looks good and then do one more pass.

@BadBoy-tn2yx Месяц назад

Great video. Polished everything as described. And got down to 3.8 lb trigger pull as well as nice gliding slide. Before it sounded crunchy. Saved me 200.00!

@BadBoy-tn2yx Месяц назад

Now I have to do all my glocks! 😂 figure you’ll save me 1000 bucks!

@CycloneGunworks Месяц назад

Nice man. Wait till you go to the range and see how easy it is to clean polished internals. Comes right off with almost no cleaner.

@ETHRON1 3 дня назад

I've worked on quite a few guns over the years doing various things but i have yet to tear into my glock for anything..this will be a big help when i do... Do you have a video on disassembling the glock upper and lower 😉😄 (slide and frame)..

@DerekSpeareDSD 2 года назад

great work!

@CycloneGunworks 2 года назад

Thanks man

@CookieMayne710 2 года назад

Awesome tutorial!!! I'm new to firearm ownership myself and it's hard to find good content that explains basic concepts of gunsmithing but you did a phenomenal job! I do have a question though, for parts that come with a coating on them such as my Beretta 92 s Xtreme trigger parts that have the "DLC" (Beretta's proprietary "Diamond Lile Coating") would polishing effect the durability of the finish at all or just make it shiny? I really want to polish the short reset trigger bar before I install it just because I'll be doing the rest of the internals at the same time but I don't want to compromise the DLC finish. I don't THINK it would but I'd rather ask and be called an idoit than do it, screw it up and be called an idoit😄

@CycloneGunworks 2 года назад

Thanks for the support. Youll be okay with the DLC coating. It can be harmed w sandpaper or if you run your dremel dry or too fast. A burn can occur. It's easy enough to avoid, you can actually feel the heat in the part as youre holding it. If you want to play it safe, just put a micro fiber cloth on a table and skim polish your parts on it by hand. That way you'll definitely be okay but I'd personally dremel away in a ¼ of the time. I just need to stress the importance of running at a low speed and keeping the polish tip and part covered. As soon as you make contact, the polish will turn black and start to evaporate slowly, just keep doing wipe offs and add more polish.

@jeffreyliu2289 Год назад

Heads up - DLC is not proprietary

@edmundoregalado9772 2 года назад

Right on!

@CycloneGunworks 2 года назад

Thanks

@a.wheeler7731 3 года назад

What is the song called for the timelapses? Edit* I shazam apped it and it says its Invisible Starlight by Audrey Morgan. Cool soundtrack and thanks for the video. I cant seem to find an instrumental only version, do you have a link to that?

@CycloneGunworks 3 года назад

Nice detective work for real👍it just so happens that she landed a deal with Samsung. So in my samsung video editor it is a file option as just an instrumental. Can't send it or I would.

@jessecopeland9728 4 года назад

Where can I find that polishing bit or do you have a part number or brand? Also what rpm roughly do you recommend? Cool videos man keep it up!

@CycloneGunworks 4 года назад

You can search on amazon for (polishing dremel tips) I recommend getting the ones that have the metal shaft attached. Super cheap for a 50pc kit on amazon. Btw your speed wont necessarily matter when polishing I like to run it almost full speed. Just dont let that bit sit on your part dry. Keep dipping parts/tip in your polish👍

@CycloneGunworks 3 года назад

Gotta look at my newest video best detail yet every step. I have all my best tool links in the description too👍

@JayyBird93 2 года назад

@@CycloneGunworks where’s the newest video? All I see are stippling videos

@5jjt 3 года назад

Don't forget to remove the STAMPING Mark's from the edge, not the face, of the bird's beak. Very crucial.

@CycloneGunworks 3 года назад

Yep less Grit for sure.

@usfreedom22 3 года назад

How often do you polish the trigger? Is it a once and done or do you redo it after a few hundred rounds

@CycloneGunworks 3 года назад

It's really only necessary to do one time or maybe once a year at the most

@CycloneGunworks 3 года назад

Gotta look at my newest video best detail yet every step. I have all my best tool links in the description too👍

@timr3191 3 года назад

Ty sir

@MichaelHellmann13 2 года назад

Can this be done using polish and some qtips and elbow grease? Or would you recommend investing in a dremmel?

@CycloneGunworks 2 года назад

You can do it with qtips and a microfiber cloth. I'd recommend a dremel always though. They are super handy for all types of uses as well.

@johnL-xk2js 2 года назад

well done.

@CycloneGunworks 2 года назад

Thank you sir

@kennylavay8492 6 месяцев назад

Seems as though you could also use tooth paste to get maybe a better polishing . tooth paste may be a little more abrasive .

@yeshua1176 4 года назад

Wish we could see a before and after trigger pull and reset maybe show us on a trigger gauge👍

@CycloneGunworks 4 года назад

Absolutely I hear ya on that. I will tell you from doing multiple, that it averages about 5 oz off the pull. Not so much, it's much more about having a very smooth grit-free, snag-free trigger pull and reset as well as slide action when racking after you polish your rails as well. Try it out you'll love it.

@CycloneGunworks 4 года назад

Just thought I'd add. If your looking to lighten your trigger just get a 3.5# trigger connector, a reduced power safety plunger spring, and a 4.5# trigger spring (no less) on a edc setup.👍

@CycloneGunworks 4 года назад

@@yeshua1176 sweet man sounds like a fun one. I'm looking to get a glock 41 soon🤣 it's silly, but I cant help it I want the biggest dog in the yard lol

@KayoMonei Год назад

I’m looking to get rid of some of the creep in my trigger

@jallen312 8 месяцев назад

@@CycloneGunworkswhat will this do for the trigger pull, and could I just install for Glock 3.5 - connector and that’s it?

@kombatboiiii5747 Год назад

I heard that it thins the putter metal and make the inner weaker . So do I polish them or I don’t , I heard it from 2 gun smiths

@CycloneGunworks Год назад

Belts and dremels used incorrectly can cause issues that could effect you over years with corrosion if not oiled normally. It's better to polish than not to polish so you can have the easy cleanable parts and smoother functions. If you still have concerns about a high value/rare firearm, or have a very high duty dependance you can polish by hand and also use jeweler's rouge. Just keep in mind that some people will tell you false info rather than admitting they aren't fully knowledgeable on the subject. I can't tell you how many "gunsmith" stippled grips I've had to completely re-do. Gunsmiths are generally pretty knowledgeable, but the really good ones will admit they don't know it all. One of the leading experts on glock trigger work is Johnny Glocks and all his parts are polished if that trlls you something. Hope this helps bud. Let me know if you have any other questions 👍

@FOURFTP Год назад

Okay I just bought a new trigger and it came with a polish bar. Do I have to polish anything else ?

@CycloneGunworks Год назад

All the components mentioned in the vid are recommended 👌

@Jordan-ql6tm 3 года назад

Will polishing help potential rust develop over time? Do you greasy or just lube those now clean parts?

@Jordan-ql6tm 3 года назад

Had a buddy with a pos px strom (I'm biased lol) who polished his internals & that long ass trigger pull was so inconsistent we would laugh when handing it to shooters who haven't fired it and laugh at their weird expressions trying to figure out when that damn thing would actually go pop lol, seemed to fire randomly on either the short or long side of the pull if that makes sense lol?

@CycloneGunworks 3 года назад

Rust will always be a problem until its coated w something. However you can lightly sand and polish away rust but you MUST lube it and keep it lightly oiled as needed. Maintenance is a must w rust

@Jordan-ql6tm 3 года назад

Right on appreciate the response & informative video keep em comin bud lol. Have you ever coated your internals with a more permanent coating? Always been an old ww2 era long gun guy so I just greased those oldies and never had an issue, but it would be nice to coat and forget those small parts permanently but question is would a coating add much thickness to those already small parts & negatively effect operation?

@CycloneGunworks 3 года назад

@@Jordan-ql6tm Cerakote clear is always a good one.

@Jordan-ql6tm 3 года назад

I'm gonna share the 💩 outta your channel bud appreciate the info.

@LouMonestime 4 года назад

Do you recommend polishing the rails on the slide too ?

@CycloneGunworks 4 года назад

Definitely the rails on the frame. The slide rails don't need any polishing tho. Just a good cleaning with angled picks, etc.

@Dirtyfish_22 2 года назад

How often do you polish? Having issue with p80 g17 trigger sticking really bad. Can’t pull trigger back an then it’s stays ware I stop pulling. Any videos of reassembling g17

@CycloneGunworks 2 года назад

Sounds like it could be related to a blockage or jam in your channel liner or something similar. I don't have any assembly videos cus RU-vid haters, but you typically only have to polish parts once, preferably after a few hundred rounds are broken in. They will be very easy to clean once polished. I do repolish after a few thousand rounds but it's not necessary. Keep hunting though you'll figure it out.

@CycloneGunworks 2 года назад

It could be as small as a spring cup being lodged. Wish I could help more.

@johnb.6468 3 месяца назад

A Chinese lower parts kit might need the trigger pin ground down and polished. I was having this same issue until I took a dremel and removed some material from the trigger pin

@Dirtyfish_22 3 месяца назад

Thank you guys sorry for late reply it’s working well polish job new crucible

@GiuseppeBerna 2 месяца назад

@@Dirtyfish_22late reply? Man that was two years ago🤣

@JT-xi7el Год назад

Looks like you use white polish then come back with a black polish? What is that?

@CycloneGunworks Год назад

It's just the white polish. It immediately turns black when cleaning/polishing something.

@chinov9445 2 года назад

💯🤙🏽

@c-note4146 2 года назад

🤔 to troll or not to troll…? I’ll do a little of both: some cringe-worthy stuff here, repeatedly call an axle shaft a drive shaft! 🤣 ok, jokes aside…some good tips you shared 👍

@muddog1561 4 года назад

How often will this need to be done? After firing a few hundred rounds the parts are going to get gunked up again.

@CycloneGunworks 4 года назад

Great question. Generally only necessary one time to remove the factory carbon and machine marks. Then the components will work smoother but most important. Your gun cleaning labor is minimal after range days because the polished surfaces clean up easier and dont accumulate as much crap either. All around great project everyone should do on every glock.

@death2pc 3 года назад

I was always of the silly notion that FULLY cleaning and relubing ANY firearm after use was correct. Perhaps I have a great deal to learn.

@CycloneGunworks 3 года назад

Definitely clean and lube every time

@_its_finn698wilson-drew9 2 года назад

Hey I’m from Australia 🇦🇺 and I can’t buy those metal parts over here and I would like to buy them if anyone has some that I could buy of them that would be great 👍 I’ll pay the cost for them and shipping and extra

@slumped.aid3n171 2 года назад

Hit me up

@Hammam-Alharith Год назад

my trigger became hard, i need 2 hands so i can pull although it is new

@CycloneGunworks Год назад

I don't fully understand what you mean, help me out.

@Hammam-Alharith Год назад

@@CycloneGunworks i received my new G19, the trigger very hard to pull, not less than 10 lb

@CycloneGunworks Год назад

@Hammam-Alharith gotcha, that can be hard to diagnose without seeing but it could be a heavy spring, heavy connector, or an issue with the channel liner or spring cups. Wish I could help more bud. I would advise you to do a full part inspection and/or take it to a glock armorer. Should be an inexpensive fix.

@2047theway 3 года назад

Gen 5 saftey plunger fits in gen 3 ?

@CycloneGunworks 3 года назад

No it will not. Pretty inexpensive for a gen 3 plunger though.

@CycloneGunworks 3 года назад

Not saying there's not a way to make it wor, but you would need other Gen. 5/4 parts and be pretty knowledgeable how the glock internals work,. So even if possible, just not worth it.

@2047theway 3 года назад

@@CycloneGunworks can’t find oem gen 3 plunger only gen 5 and the gen 5s go for like 10$ max with the spring I can only can find gen 3 aftermarket custom plungers that are like 20-30$ dollars

@CycloneGunworks 3 года назад

@@2047theway it's all those p80s being built. Add some to a watch list for an email reminder. Or if your in a rush grap the apextactical polished rounded one in stock right now for 17.95 👍

@2047theway 3 года назад

@@CycloneGunworks ye I bet but I ain’t tryna mess up my slide or change he anything so ima just keep looking till I find a fairly priced one and Its funny you say cause I actually need the part for a p80 build I’m working on I just have an extra slide and frame and a lower parts kit but no upper so I gotta order a nice upper parts kit or buy individual parts and I chose individual parts personally saves me money and usually like to stick with oem parts or upgraded parts I know are reliable

@arlissyoung8899 Год назад

Anything you can do for a Glock trigger it needs to be done. 30 Years in the running and has been in first place from the first day till this very time as the Worst trigger of any gun on the market. Very long pretravel, spongy, soft mussy break then the long trip back home to reset. I love it when people tell me O I don't mind the factory Glock triggers, I like it. WOW it's your lie tell it anyway you want to. I want get started on the grip angel.

@wis1024 Год назад

Lol i like the grip (angle)

@arlissyoung8899 Год назад

@@wis1024 Many people like the grip angel. Nevertheless I found most start out with a Glock and not other guns like the 1911-2011 style angels that give a much better pointing and sight picture. Being old school has it's down sides.

@herrent 2 года назад

Trigger pull readings would be helpfull

@CycloneGunworks 2 года назад

It doesn't take much weight off. About ¼ to ½ of a lb. It's more for the smooth feeling pull and the firearm to function better while everything is reciprocating. Also amazingly easy to clean after polishing.

@herrent 2 года назад

@@CycloneGunworks my new G17 has 8.5 lb pull. Something is wrong. Any ideas why?

@CycloneGunworks 2 года назад

It could be the bend angle of your connector or an issue with drag in your firing channel. Glock issues are hard to chase without visuals because most of the parts work in accordance to each other so it's like each issue can be from 5 different reasons. I'd do a full dissassembly to check things. On a side note, I run all my weapons with a ghost 3.5# connector, 4.5lb striker spring, reduced plunger spring, and for Gen 4 and prior the high powered trigger return spring as well.

@BradM766 3 года назад

Mmkay level 9000 Jesus Christ

@CycloneGunworks 3 года назад

Hope it helps👌

@Drawde907 5 месяцев назад

You can take a micro fiber rag and some gun oil and get the same results, glock parts are already slick and shinny under the metal treatment they're using . Guess this makes it faster though

@garybarbatelli1972 Год назад

This isn’t the original 25 cent trigger job.

@METALGRAMMYS 2 года назад

Guys don’t forget to have your girlfriend polish your knob!

@stevek343 2 года назад

Already did 🌭.

@CycloneGunworks 2 года назад

Just stay away from that mothers polish lol😄😢 sorry had to say it

@danielberry6060 Год назад

Some elevator music would have been nice.

@CycloneGunworks Год назад

sorry im still trying to figure out how to not get copyright strikes without buying rights

@lifeofmike556 18 дней назад

I own 2 Glocks. Both are very cheaply made and I’m surprised for the $700 I spent on them they are as shitty as they are. Plastic mags, slide rails aren’t polished, the trigger is total ass, the mag release is also garbage. I don’t understand how Glocks aren’t basically at hi point level. Because they are.

@creepingdeth141 Год назад

Can we get a pull gauge before and after the polish?

@CycloneGunworks Год назад

I can tell you first hand it's only a ¼ lighter at the most. (2-4 Oz difference) it's more about the overall feel and also the easy cleaning of carbon when polished.