Glock Trigger Connector Ghost 3.5 lb Install (HD+Quick) 

I did my Glock 26 with this connector. What a huge difference in pistol's accuracy. I bought the Wolf version and installed it in the Glock 35, and the Ghost is smoother, slightly. Great video. Thanks.

very helpful video did the install with no issues thanks for the tip on moving the slide release up and down for adjustment to make the pin go in with ease

Your instructions were PERFECT. They were easy to follow each step clearly. Not only did I install the Ghost 3.5 trigger, but I also installed the extended controls kit while I was at it. Thanks again!!

Thanks for the good walk through, mine went smoothly and now my Gen 3 G17 trigger is 5.5 lbs instead of 7. Smooth too. 100 rounds down range today to test it, flawless. The First out, first in pin worked perfectly. Subscribed!

Awesome tutorial. You actually showed where it goes back into places which shows me it ain't as bad as it may sound. Thankyou!!

This Guy ROCKS! Thank you for this video. I followed it step by step and swapped out my 5.5 lb. bar for a 3.5 lb. bar. I really like how this guy gets right to the point. Bing, Bang Boom! Donne!

Unknowingly bought a g19 with an 8lb connector... after shooting a few hundred rounds I knew I had to swap it back to a 5.5. This video made that process quick and painless. Thank you!

Great job on this one. Straight to the point and super detailed.

Very nice video. You did a great job making sure things were visible while you were working!

Your video helped me out dramatically!! I couldn’t figure out how to align the trigger housing and align it back into the frame. Thanks for the video##

Thank you so much for this video. Well done for a first timer here. Made it very easy to understand and follow the installation.

This helped me so much, went exactly like the video did. Thank you very much.

I just installed new connectors on my two Glocks using your demo. Saved me a lot of time and hassle. Thanks a lot! Super useful video.

Dude thank you the orientation you showed made it so easy I’m confident now grabbed a vickers trigger with trigger bar and a ghost 3.5 lb connector

Awesome video, just watching more videos like this to get more knowledge about my glock, and I am now going to purchase a Trigger Connector !

awesome video I will be installing my ghost connector tonight thanks to your video!

Great video man you are a good teacher. The explanations were awesome

Excellent video! Thanks. Couldn't have been better!

Good photography and good description. Thank you.

This was great instruction. My G43x was a little different but works fine. Thanks.

Nice very explanatory video, very clear and detailed.

Great video. Got mine in easily, thanks!!!

awesome thanks for the video..just got done with the install and it was my first time tearing my glock down this far

Well done. Nicely shot (video) too, nice and bright.

You don't need the flat head scewdriver. Look closely at the slot you stuck the flathead in to push out the connector. There's a 3/32 hole drilled thru the middle of the slot. Exactly the size of the Glock take down tool. Just punch it out with the Glock takedown tool. And, just fyi, 2 other things you need to start doing. 1. Pry up the locking block before you remove the slide release. You can get the spring hung up inside the locking block and bend it the way you're doing it. 2. Punch all 3 pins out from left to right, the way you did here. But reinsert them from the other side.

did my glock 30S with this trigger and the 4lb firing pin spring and it’s a crazy difference, almost scary difference but i can’t wait to shoot it, thank you for the clear instructions

Best install video ever! Thanks

Great teaching! The tips made the swap very fast.

Somehow that went really smoothly. Thanks for the walk through and concise instruction.

This video was a life saver

Awesome instructional video! 👍

Excellent Video!

Thanks for the great video!

Nice video. I used this to actually install a apex Glock trigger kit with disconnect. Your step by step guide was more helpful than the Apex install vid IMO. Thanks!

Very awesome tutorial

Great video dude. It's been a while since I took a Glock apart. One little thing that might help everybody. You don't need the flathead screwdriver, because the hole in the back of the ejector housing (where the disconnector slides into) is round in the middle to fit your Glock tool.

Great instruction! I first tried a cheater method on another guy's video that only removes the grip pin--grrrr! So hard to install that way--I almost started to scar parts forcing them back in. I then followed yours which I originally avoided as it looked like more work. Yours ended up being faster and far easier!!

Thanks for the vid!

I have that exact connector and I will use it one day, when shooting double fire becomes legal. No matter what Glock I put this in, it fires twice every time.

You’re a lifesaver thank you 🙏

You are very thorough and explain things clearly. As I’ve been putting the 940c together I’ve been looking at a shit load of videos to figure out every step and I’ve gone thru the parts that came with and decided to change out many of the pieces and this was one and I chose the Ghost Lady 3.5 pound but it doesn’t have the holes and I did want them but I didn’t realize it was self cleaning, I also ordered and installed the ejector pin to the 30274, waiting on the extended slide release, the extended mag release and was debating on putting the extended slide lock but not sure if I need to or not but thinking I should because I have problems with my hands. I’m also waiting on the stainless steel guide rod. I got the 18 pound spring because I wasn’t sure if the other weight spring was better or not so I went with the standard. How does those choices sound? Do you think I made a good decision on my parts? And may I ask what your thoughts are about the trigger that comes with that parts kit? I’m trying to make this into a great piece that can be relied on with a light trigger pull and reset. I appreciate all your videos and help.

Good instructions there's an easier way to do it without taking out the whole trigger mechanism all you do is take out the back pain lift replace and slip back in I done my friends Glock and my glock that way I install it in less than a minute

thank you for your video 👍 what is the job of that part (trigger connector) please ? no need to change the spring for a lighter spring ? how to get a lighter trigger ? and what is or are the differences between both ? thanks

I bought a Glock 31 c on which I intend to replace the trigger connector, so a BIG thank you for this video. One question though should I polish the new trigger connector a bit or leave as is ? Thanks for your advice. Best regards

Holy crap that truck for the second pin worked like a charm 😂

Best vid I've seen

I just did my Glock 19 using the Ghost 3.5. I did not notice much of a difference in the trigger pull. I will test fire the gun tomorrow to see how it does. Your video is excellent. Very detailed and easy to follow. Thanks for posting it.

Thanks a ton, gotta love glocks, ez pz...great tutorial...fantastic!

Are these the same instructions i can apply to my glock 19 and 17 gen 3?

Does this lighter triger pull gives you the ability to shoot faster and or have a faster reset trigger ?

Thank you !!!!

What makes a bigger difference in trigger pull the connector or the firing pen spring? Thank you!

Any experience with the double diamond 3.5, glock oem minus, or johnny glock connectors?

Thank you for this video! I'm a complete noob and doing this for my first time on my G19 Gen4 I was able to installed my Ghost trigger connector in less than 15 minutes. BTW I didnt need to use a small screwdriver for popping out the trigger connector bar, I was able to use the glock tool for everything. At least on my gun there was a small half circle opening in the slot, perfectly designed to fit the glock tool through to pop out the trigger connector!

Would me putting a lighter trigger and a connector make the trigger pull even more lighter with both added??

Thanks for the video. Helped, too bad I don't feel a difference with my wilson combat connector.

Awesome channel, new subscriber.. So sad I found you as we are running out of time on this platform since youtube is killing all the gun channels. But thank you for your channel, will be watching all your previous videos.

Is there a difference between Ghost connector and Minus 3.5 lbs connector

Great instruction. Saved me money. And didn’t waste my time with all the bullshit extra chatter. Great page!

Helped a lot that shi runs so smooth and the trigger is so light 😩

As an update, the G19 and G43 Gen5 models only have two pins. My G19 has ambi slide lock levers that are actually one piece. The G43 has the same slide lock assembly as shown on the video. The spring configuration is different as well.

Mine won’t reset the trigger do I need a stronger spring?

Is it ok to carry with this 3.5 trigger pull ?

Awesome video, everything went smoothly like in the video step by step! I installed the 3.5lb connector on my g23, I must say I didn’t notice that much of a difference between that and my 19 with factory connector. Idk if I actually have to shoot it I just dry fired both. Anyone else feel the same?

Ghost Bullet Extended Slide Stop Release for 3 PIN , Ghost LADY 3.5 High Polished Trigger Connector, Ghost LADY 3.5 High Polished Trigger Connector & OC Custom Polished Gen 4 Ejector (OEM equivalent to Glock # 30274 ejector)…. These are the parts I got. So far. I’m debating on the extended slide lock. Should I get that while I’m waiting on these parts to arrive?

Especially on the slim lines

What are your thoughts on changing to a lighter connector for a concealed carry weapon should you ever have to use it and a case goes to court? Or has that argument been shot down? Also great video showing how to do this

Every time I've tried to use the ghost connector no matter what I try it will always fire on the reset. Wen't back to stock and no problems.

It would be great if Glock just polished the connector bars at the factory :(. And also included night sights.....And ergonomic grips....Why did I buy a Glock again?

6year old video, Is it still “self cleaning”?

Just did this.. hope I did it right lol guess we’ll find out later today when I go to the range 🤷‍♂️

You change only the conector the trigger see diference or have to change the springs too

Excellent video. Took me less than 5 minutes. Would have been less except with one tight pin.

Super helpful video however if u have a gen 4 glock be aware that some of the connectors will not fit right.

I just installed this and it feels like the slide is tighter and harder to rack with the new connector in. Does anyone know if that is normal?

I got the new Angle and it didnt drop the weight . I have already done a lot of work on my Glock 17. My 17 went from a nice smooth trigger to rough after installing the angle 3.o .plus it didnt lower the weight hardly at all . I look it out and got my nice smooth trigger back again . Not worth the 36.00 I paid for it locally or even 5.00 imo.

Video failed to address 'bend' of the connector issue, and proper insertion of the foot of the connector. These issues are addressed in the online 'Connector Installation Instructions' by Ghost, Inc. but it's all but impossible to comfortably read them due to an overly large page display on their website. I've contacted them about this annoying problem, which have made those instructions all but worthless to me..

Nicely done.I loved the whoops.There are always whoops.😂

I rewatch this part three times did he really call the packing tape tactical tape?

I miss the days when Pew Pew Tac made calmer, more matter of fact videos

I installed this seemingly with no problems on my polymer 80 g19 but when I put the slide back on, the trigger wont actuate. The slide gets stuck. I ended up having to remove the back plate and striker to get the slide off. I don't know what is wrong. It worked perfectly before I put the ghost avenger connector in.

Good video but I didn't notice any difference from the stock connector.

Who’s glock is stock at 5.5 pounds? Did I not listen carefully enough? Was there upgrades prior to this video?

Its better to take it completely out like he does BC getting the trigger bar back on is bad BC ur bending and putting pressure on the bar when u shouldn't and don't have to

No function test?!?

Tactical tape 😂

How is that supposed to be self cleaning? That’s as believable as the ar15 being self cleaning, and we all know how that went.

tactical tape.... lol

Thanks for the video. I put the 3.5 in when I bought the Glock now going for my ccw and the pistol must be in stock form here in the peoples socialist republic of Kaliforniastan. Thank God I live in a free county far far away from cities and liberal counties.

You don't have to pull the trigger out? Why did you do All that extra work?

And I'm pretty sure when you check the pull it will be the same just like my G19. Waste of time and $$$$$

When it won't go back into battery after install fix ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pErD6k1QGUk.htmlsi=S0UFynfDECSwo8xp

Im sorry...did you say "tactical tape" ..

Tactical tape 🤣🤣🤣🤣🤣

Ahahaha no joke I just messed up my glock following these steps. Tryed it on my gen 5 and now I cant take the slide off and it wont fully rack 😨

“You will need the Glock”. Really ?