GMC Bad Ignition Switch 

This was the exact video I needed thanks

You may be right, I had the same problem and I changed the ignition switch today and that solved the problems.

Exactly what I needed, Thank you

Thanks for you help god bless you

Exelente vídeo gracias me fue muy muy útil me saco de un gran apuro gracias por tu video

You put your left foot in. You put your left foot out. You do the hokey pokey. And turn yourself about. And that’s how you turn on the truck.

So what im trying to see could the ignition switch gears be the issue because my dash cluster shows the battery light instead of security. & also the PRNDL , gas gauge and coolant temp doesn’t function correctly. i was going to try to move the gears. because my key was getting stuck

African American engineering at its finest my brown brotha

Yes I'm home probably a 2002 Chevy Monte Carlo all I can come around is my check engine light 10 seconds later all the gas lights are flash on and go right off what could be my problem

Excellent

Thanks!

So what was the fix ? Which part needed replaced ?

I’m having the same problem but no light on my dash is coming in but all the other lights are on far as the lights

BIG HELP THANKS

Robert -how did you release the white clip (with brown/green wire) from ignition cylinder?

I have Toyota allion, when I turn on the switch, ignition and gaudes light didn't come on but the engine can start.if anyone can tell me how to fix my cat

So I just got the cylinder fixed. It turns everything on, but doesn’t start the truck.

thats not the ignition switch thats the cylinder

I'm having this same problem. What can I do to fix it?? What did you do?? What was the problem??

My truck turns on and everything but it won’t go back to off position basically engine off but not the truck I can lower the window 😢 it stays and drains my battery Please help 🙏

I tried to turn on the blazer via the switch...it didn't work..at the final click all lights go out.

Man ur funny bro.

I have a question, my key is stuck in the ignition. I took the cylinder out put a new one and it does the same thing.keys come out when the ignition is out but when I put it into the housing it stays stuck

I have an interesting problem with my 2000 Suburban, related to what you're doing here. I live in Northern Minnesota, so anytime we get below about -7 degrees, I cannot start my vehicle. The key turns just fine, but in the sequence, I s-l-o-w-l-y turn the key past the "on" position (dashboard and ignition lights come on), then all power and lights shut off, then the starter motor turns the engine over. The problem lies in that I can run that starter all I want, but the vehicle won't start, because the ignition circuit is not active. I do not believe it to be the keylock itself (although I am going to replace that at the same time), but rather that there is something loose in the electronic switch mechanism itself. Right now, everything works fine (with one exception), as it is approaching 60 degrees. But my new problem is that I cannot get the radio to send audio to the amplifiers! (In short, I know it's not the radio itself, as a different radio did the same thing when plugged in.) But I am of the opinion that this problem also stems from the switching circuitry, as the vehicle is designed to cut out the radio when cranking the engine. Does this sound plausible, that I will need to replace the switch circuitry? Thanks in advance.

Anyone know how I can remove my key from the on position, key got stuck

Did ur stereo stay on after cutting off truck ?

Did you ever fix this problem I have to do the same thing with my s10

Qué ago si se activa el seguro i no puedo mover la palanca de canbio

My 2001 tahoe won't start but all the lights come on i changed the starter and my spark plugs and wires still no crack help me

Hey bud! The problem is between the cylinder and the switch. Why not pull out the cylinder and see what's not working? You haven't even got a name for the part that is the problem because from what I could see the cylinder and the switch both work. It's what's between then that is your problem. For me the cylinder sticks in start and the starter motor keeps running unless you carefully turn the cylinder back to run from start. Good luck.

Want start

Did it crank before you had to do it ?

I have a question

No key in tumbler get it out

You're you're not much help if you keep saying go look at another video why do you even post it. Not going to get much,👍

》》 REALLY---I WILL HAVE TO SEE ANOTHER UTUBE VIDEO TO SEE HOW TO REMOVE THE COVER????? ( YOU FAILED!!! ).. YOU SHOULD HAVE INCLUDED IT IN YOUR VIDEO!!!!° >FAIL