Тёмный
No video :(

How to Replace Ignition Lock Cylinder GMC Sierra or Chevy Silverado (Key won't turn) 

TWA Motorsports
Подписаться 72 тыс.
Просмотров 69 тыс.
50% 1

How to Replace Ignition Lock Cylinder GMC Sierra or Chevy Silverado (Key won't turn)
Want TWA Motorsports Merch? Go to www.twamotorsports.com and pick some up!
Parts Used
Replacement GM Tumbler/Ignition Lock Cylinder amzn.to/40tsOmB
Tools Used
Dewalt Impact amzn.to/3ZTwLAW
Plastic Pry Tools amzn.to/3zHqGNp
Pick Set amzn.to/3LoI54d
Needle Nose Pliers amzn.to/3MXbPpK
LED Light amzn.to/3KsIuBQ
Gloves amzn.to/3mVYBPf
Microfiber Towels amzn.to/3Fv3llf
Interior Cleaner amzn.to/43x7vTZ
Interior Dressing amzn.to/43rSWky
Detail Brushes amzn.to/3Uvb0Go
Other Parts Used on This Truck
Mirrors Used ebay.us/BaWP7G
Door Handles ebay.us/zZ7lPg
LED Interior Light Bulbs amzn.to/3Gqwb6Y
Lens for Upper Console amzn.to/3KLlFti
Short Antenna amzn.to/416LVE8
Trim Panel with Vent and D.I.C. Opening ebay.us/A9V5fO
D.I.C. Switch(Buttons) amzn.to/3zTNKZj
In this video we continue the fixes on the GMC Sierra RCSB. If you own a GM truck or car this is probably an issue you will have eventually. The key is tough to turn or will not turn without wiggling back and forth. The tumbler or ignition lock cylinder goes bad.
Now you can go to a local parts store or hop on Amazon and order a replacement with a new key. The problem is all the other locks will use a different key. I decided to replace or rebuild the ignition cylinder or tumbler to fix this common issue. GM actually sells this and you can rebuild or replace with simple hand tools. This can be done in under one hour and allow you to keep the factory key that matches the vin on the truck. If you are having issues with your ignition or key not turning this is a must watch how to video. This is very common on the trucks from 1999-2013. It seems the newer the truck the less issues are had. The other part that is nice about this is if you ever lose your key you can go to GM with you registration or title and have a new one made. If you lose a parts store replacement you will not have that option. Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Want to Send Stuff
TWA Motorsports
PO Box 190
Aurora MO 65605
Subscribe and Follow TWA Motorsports
RU-vid: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/3FMXiI3
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/3KC27HO
Photo editing amzn.to/3KC27HO
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer: This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

Опубликовано:

 

24 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 114   
@8307c4
@8307c4 7 месяцев назад
This is the video to watch, very helpful, short and to the point. I just fixed my truck that was having this problem. Works like new, thank you.
@TWAMotorsports
@TWAMotorsports 7 месяцев назад
Glad I could help
@austinsilcox7988
@austinsilcox7988 Год назад
This video was supposed to be how to get it out if the key “won’t turn” waste of my time
@jer9433
@jer9433 8 месяцев назад
Just keep wiggling 😅
@barryb6619
@barryb6619 2 месяца назад
That doesn't always work. Thanks for wasting my time. Very misleading
@clandestinerobot14
@clandestinerobot14 Год назад
We had this on several of our work trucks and the locksmith we used says its in part due to the end of the key getting worn. So we keep a master key to cut new ones from. Great video!
@TWAMotorsports
@TWAMotorsports Год назад
I do think a new key will fix the last bit of catching
@donvoll2580
@donvoll2580 Год назад
Good day Yes the key should be cut, but now it is a old key, so cutting is the same not?
@martinevans4002
@martinevans4002 10 месяцев назад
My locksmith made a minor adjustment using a manual key cutting machine to compensate for the key wear. He cut a blank first to make sure that it turned in the cylinder and then cut the chip key from the blank. I didn't need to replace the cylinder tumblers.
@TWAMotorsports
@TWAMotorsports 9 месяцев назад
@martinevans4002 nice
@8307c4
@8307c4 7 месяцев назад
haha yep, keep the factory key in a safe place as a "master" to make copies from, always use copies to drive the vehicles.
@Miguelgarciaftw
@Miguelgarciaftw Год назад
I broke my key in half and I stuffed one half in there to be able to drive the truck and you sir just saved me a lot of time on trying to pick the piece out that is stuck in there lol
@TWAMotorsports
@TWAMotorsports Год назад
Lol.
@anthonywagner3273
@anthonywagner3273 Год назад
Short videos are good Travis. Easier to squeeze in watching a short video as apposed to finding the time for long videos. Keep up the good work. I've been a fan for quite a while now.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. They are a nice change up to film too.
@martinevans4002
@martinevans4002 10 месяцев назад
My locksmith made a minor adjustment using a manual key cutting machine to compensate for the key wear when I had that problem. He cut a blank first to make sure that it turned in the cylinder and then cut the chip key from the blank. I didn't need to replace the cylinder tumblers.
@larrydeaton5452
@larrydeaton5452 Год назад
I do love the NNBS content. Now I will know what to do if mine does that. Great video Travis!
@TWAMotorsports
@TWAMotorsports Год назад
A little biased. Lol
@leviwoodring6101
@leviwoodring6101 Год назад
On my dad's 09 you got to have it just pulled out slightly and it works good.
@TWAMotorsports
@TWAMotorsports Год назад
Yeah it's common
@tuscani915
@tuscani915 Год назад
Usually it's the key that goes out before the cylinder. I always recommend a new key from dealer, cheapest rhing to first.
@TWAMotorsports
@TWAMotorsports Год назад
Probably a good idea
@knapptasticmedia
@knapptasticmedia Год назад
did this similar thing on my obs and it was the same way getting the key tumbler out of the column took couple tries for she let go, definitely nice to see gm is still the same even after so many years later.
@TWAMotorsports
@TWAMotorsports Год назад
I agree. Nice to have parts available
@reinaldotorres5401
@reinaldotorres5401 Год назад
Was looking forward to this video have same problem with my 07 Tahoe
@TWAMotorsports
@TWAMotorsports Год назад
Same problem on those.
@Lowzaracing
@Lowzaracing Год назад
twa finally building a nnbs when i get one, hope to see a lot of tutorials that way i can follow through 😂
@TWAMotorsports
@TWAMotorsports Год назад
Yes sir
@JayeRock
@JayeRock Год назад
Great work and another great video, I feel a cluster swap coming the one with 6 circles. 😊
@TWAMotorsports
@TWAMotorsports Год назад
I need one
@user-py1hx6pi3v
@user-py1hx6pi3v Месяц назад
thank you, it will be used again when I do the work
@TWAMotorsports
@TWAMotorsports Месяц назад
Thank you
@palomafarmlandscape7859
@palomafarmlandscape7859 Месяц назад
Worked perfectly thanks for the video!
@TWAMotorsports
@TWAMotorsports Месяц назад
Thank you. Gladed it helped you
@donsimpson2561
@donsimpson2561 Год назад
Great job/video Travis. Mine isn’t broken but now i know how to address if it does.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. Pretty common
@tylerdurdin8069
@tylerdurdin8069 2 месяца назад
Stupid click bait. Key wont turn my ass! Screw you guys for wasting my time when i need a fix now
@Mods_o_joy
@Mods_o_joy 5 месяцев назад
Im curious - how did you get the driver info center to work? or was it already equipped, want to know about retrofit ability for a WT model.
@TWAMotorsports
@TWAMotorsports 5 месяцев назад
Made a video on that with a parts link in video description
@JamesPeterson-oh3kj
@JamesPeterson-oh3kj Месяц назад
i put in a new ignition lock cylinder with keys for a 1998 chevy silverado 1500 key will go forward truck will turn over but wont start,also returning key back wont lock in place
@TWAMotorsports
@TWAMotorsports Месяц назад
Hard to say without being there
@GustavoArreola-cl3dg
@GustavoArreola-cl3dg 6 дней назад
What can be done if the cylinder wont lock back in place
@TWAMotorsports
@TWAMotorsports 5 дней назад
Replace whole tumbler
@manuelrivera7220
@manuelrivera7220 5 месяцев назад
looks easy, I will try it on my 2007 Sierra.
@TWAMotorsports
@TWAMotorsports 5 месяцев назад
It's not bad
@user-pr3ok5ri4v
@user-pr3ok5ri4v 11 месяцев назад
at 4:28 your key was in the off position and then the video fades to black, then when then video fades back in at 4:29, your key is in the on position so the pin is easy to push down and the ignition can slide out... I thought this video was showing what to do if the key key won't turn... how did you get the key to turn? it looks like you just edited your other video in..
@TWAMotorsports
@TWAMotorsports 11 месяцев назад
It turned, just not easy
@ronyoneus1109
@ronyoneus1109 13 дней назад
Is the same key or you got one with the cylinder
@TWAMotorsports
@TWAMotorsports 13 дней назад
Same Key
@keilylmm6377
@keilylmm6377 Год назад
Nice video on the project GMC Sierra.. 👍
@TWAMotorsports
@TWAMotorsports Год назад
Thank you Keith
@davidmanevich1040
@davidmanevich1040 Год назад
I'm trying to replace the whole ignition assembly can't get locking washer off the steering column how do I do that
@TWAMotorsports
@TWAMotorsports Год назад
Not sure since I haven't done that recently
@MrMartyian
@MrMartyian Год назад
Great video on ignition issue. But I have a question of subject though. I have a stock 4.3 V6 should I or not install an h pipe or x pipe dual exhaust ?? Just wanted to somewhat upgrade my exhaust system. What are your thoughts ??
@TWAMotorsports
@TWAMotorsports Год назад
I won't. No gains to be had on a v6
@MrMartyian
@MrMartyian Год назад
True. But actually was going more for the sound.
@TWAMotorsports
@TWAMotorsports Год назад
Not a huge fan of sound of the v6 with aftermarket exhaust but that is just my opinion
@staleyexplores
@staleyexplores Год назад
the three row it looked like the first two on the right side were potentially put upside down. but maybe you caught it or i missed something. just before 12 minutes in the video if that helps.
@TWAMotorsports
@TWAMotorsports Год назад
Yeah they only go in one way so not bad.
@brandonsmith8548
@brandonsmith8548 3 месяца назад
Thats mine everyday!
@TWAMotorsports
@TWAMotorsports 3 месяца назад
Replace it
@steveu235
@steveu235 3 месяца назад
Thank you
@kevinsteinke2603
@kevinsteinke2603 10 месяцев назад
How do you find the numbers on original lock tumblers when you cant remove them?
@TWAMotorsports
@TWAMotorsports 10 месяцев назад
Gm dealer should be able to tell off key
@judyjohnson630
@judyjohnson630 4 месяца назад
Good video for replacing the cylinder. But ---- if the key truly won't turn, you can't replace the lock cylinder this way.
@TWAMotorsports
@TWAMotorsports 4 месяца назад
Correct
@markb3129
@markb3129 Год назад
Good video, looking forward for more. ✌🏻
@TWAMotorsports
@TWAMotorsports Год назад
Thank you Mark
@joecucinotta1592
@joecucinotta1592 2 месяца назад
Worked for me
@TWAMotorsports
@TWAMotorsports 2 месяца назад
Glad it did
@one5dara
@one5dara Год назад
Had the switch & lock cylinder changed on my 03 Envoy but now the key doesn’t turn at all. It goes in & out but just doesn’t turn. Was the cylinder installed incorrectly?
@TWAMotorsports
@TWAMotorsports Год назад
Key may be worn out
@one5dara
@one5dara Год назад
The lock cylinder is new & came with new set of keys, could the keys be the wrong keys?
@TWAMotorsports
@TWAMotorsports Год назад
Hard to say
@tyg5265
@tyg5265 Год назад
Any plans to address the worn arm rest? Mine looks exactly the same 😅
@TWAMotorsports
@TWAMotorsports Год назад
Yes. I will replace eventually
@johnhardwick1736
@johnhardwick1736 4 месяца назад
But your key turns....video says what to do if key wont turn...i cant turn to run
@TWAMotorsports
@TWAMotorsports 4 месяца назад
Gonna have to drill the tumbler out
@johnhardwick1736
@johnhardwick1736 3 месяца назад
For anyone else in my same spot - there's a small hole at about 7 or 8 o'clock around the ignition cylinder that you can shove something in to get it release and allow the key to turn
@KimberlyLichnerowicz-rr4xq
@KimberlyLichnerowicz-rr4xq 9 месяцев назад
I have a 2001 chevy silverado and the key goes in and you can turn it but doesn't crank all the way over. Now I already replaced the lock cylinder a few weeks earlier and been working but had hard time taking key out after turning off every time we used it then tried to start wouldn't any ideas on what could be the problem now. The cylinder has warranty so got another one but don't want this to happen again. Thank you for the help
@TWAMotorsports
@TWAMotorsports 9 месяцев назад
Sounds like a bad tumbler
@doysterd1047
@doysterd1047 Год назад
How did you get the ket to turn. Mine key wont turn and is broke in half.
@TWAMotorsports
@TWAMotorsports Год назад
Gonna have to replace the whole unit or try to drill it out
@GsHops0328
@GsHops0328 4 месяца назад
I wish you would’ve video the drill but thanks.
@TWAMotorsports
@TWAMotorsports 4 месяца назад
@GsHops0328 that sucks to have to do
@lifteddreamz830
@lifteddreamz830 Год назад
Can a bad ignition lock cylinder cause a key relearn process not to work?
@TWAMotorsports
@TWAMotorsports Год назад
Yes it could
@lifteddreamz830
@lifteddreamz830 Год назад
@@TWAMotorsports it turns like it supposed to but gets jammed up sometimes. Just makes me wonder if it’s possible something isn’t reading it right. The security light also doesn’t come on like it should either
@TWAMotorsports
@TWAMotorsports Год назад
Could be the problem
@stormmccullouch
@stormmccullouch 11 месяцев назад
What is the exact part that you got?
@TWAMotorsports
@TWAMotorsports 11 месяцев назад
Link in video description
@wadeadams9471
@wadeadams9471 8 месяцев назад
I did this exact same thing. But only I paid a locksmith to do it. Replace the original then bought one through the dealer. Have the locksmith hook me up this is about 2 or 3 years ago. And it's already shot hard time turning. I will buy a aftermarket doorman brand. And just have two keys want to unlock my door and one to start my truck. I won't buy no more AC Delco original ones.
@TWAMotorsports
@TWAMotorsports 8 месяцев назад
Never had issues after replacing
@ericvisser3064
@ericvisser3064 8 месяцев назад
Its great but seems like ur turning the key to get it out of the ingition if your key doesnt turn u shouldnt be able to get the cylinder out
@TWAMotorsports
@TWAMotorsports 8 месяцев назад
You can but have to drill it out
@kevinedwards7206
@kevinedwards7206 3 месяца назад
try reading the insteuctions first
@TWAMotorsports
@TWAMotorsports 3 месяца назад
Probably so
@MrLandslide84
@MrLandslide84 10 месяцев назад
Question. What if they key DOESN'T turn. 99% of the videos are "well, we can get it turn after 20 minutes." our is broke broke. Any ideas?
@MrLandslide84
@MrLandslide84 10 месяцев назад
And TY for any replies.
@TWAMotorsports
@TWAMotorsports 10 месяцев назад
Have to replace ignition switch or drill out the old one.
@MrLandslide84
@MrLandslide84 10 месяцев назад
@@TWAMotorsports Just got it. Had to disconnect the little black cable under it. Seems like something to do with an interlock? I was able to turn it using jiggle method after that and remove it. Thank God. Lol
@TWAMotorsports
@TWAMotorsports 10 месяцев назад
@MrLandslide84 that's good at least
@KrazyWolf61
@KrazyWolf61 4 месяца назад
Can’t see what you are doing! Looks like this would have been a good video. Dang it now I have to go search for a different video. 😢
@TWAMotorsports
@TWAMotorsports 4 месяца назад
Tried to film around myself but hard to know sometimes
@user-os4fw1jd4m
@user-os4fw1jd4m Год назад
How can you take it out without key
@TWAMotorsports
@TWAMotorsports Год назад
Replacement of entire assembly or drill it out
@johnmateja638
@johnmateja638 Год назад
You're supposed to have the key turn to the on position then you hit that little pin hole on the Tumblr and then the Tumblr will come out
@TWAMotorsports
@TWAMotorsports Год назад
Yep.
@themountainman3337
@themountainman3337 Год назад
What if you can't get it to the on position? My key got ripped out of my truck while it was running and now I can't get it to turn to that position. Might of damaged the inside of the cylinder is what I'm thinking since I can still open my doors with the key.
@TWAMotorsports
@TWAMotorsports Год назад
Drill it out or replace whole assembly
@user-hv4vx5gb1d
@user-hv4vx5gb1d 2 месяца назад
Get rid of the gloves lol
@TWAMotorsports
@TWAMotorsports 2 месяца назад
Pass
Далее
2002 Chevy Ignition Lock replace.
15:16
Просмотров 19 тыс.
#JasonStatham being iconic
00:38
Просмотров 432 тыс.
GM Key Stuck How-to Fix 98 to 05 Truck Van
19:36
Просмотров 154 тыс.
Replace Ignition switch on 2013 GMC 1500
8:12
Просмотров 2,1 тыс.