GOIN WIDER!!! Hellcat Replica Wheels and New Tires on My 2019 Dodge Charger RT Plus! 275/40ZR20 20x9 

Bro you haven’t been doing anything but motivating me to join the mopar community. When I do buy my first car I’ll be sure to watch all of your videos AGAIN ‼️💪🏾

Your truly an underrated RU-vidr, keep putting out content and your channel will definitely take off. Keep up the great work buddy

dope set up all you need is lowering springs and a wicker bill, with some longtube headers.

Keep the rims if I were you. You’ll never know if you got a flat tire or you wanna go back to them. I have demon replica wheels and I have 9” in the front and 10.5” in the back and I swap back and forth depending on seasons. Anyways nice charger ! 🔌 Coming or great !

Looks good! Time to lower it..🤙🏽

You're on the route of doing exactly what I did on my Charger already. Same tires, same rims, adding the tinting on the sides and back, removing Dodge logo on back. I did a mid-muffler delete and it's definitely louder but reasonable when not flooring it, I recommend just going with that. My best 0-60 is 5 seconds flat and the thing that made the biggest difference is the air temp outside honestly, having it cooler as it is now really helps.

That wheel gap tho...definitely needs lowering springs. After that I would go with some 345 badges on the fenders, wicker bill for the spoiler, painted calipers, and an AFE momemtum GT intake

I remember the good all days when I would takeoff perfectly good equipment and replace it with slightly nicer perfectly good equipment. Do it while you can and enjoy your ride.

I love those rims man! My R/T Shaker gets delivered tomorrow morning I can't wait to put some of those rims on it

Looks good! My 6.4L Scatpack came with P275's and 9.5" rims all the way around. I installed 2 - Nitto NT555R G2 P315/35/20 for the rears, 2 - 10.5 inch Hellcat replica rims and a 3mm spacer, one on each side. My 0 to 60 times dropped from 4.5 to 3.9. I also was using the Tazer in full track mode and I have a Mopar CAI filter installed. You should get a Tazer. My next project is the mid muffler delete.

I got this right now as a rental. Couldn't believe enterprise had on lot. Amazing. I can't break 6secs. My son totaled my altima. Good times. Has some yellow strip on bumper. A guard I guess. Needs colored calipers and blacked out windows.

Really like that you do things “DIY” on such an expensive car. Definitely unique in mopar community. Also some small spacers might not be the worst does and it will make them more aggressive and safer for your wheel well

What website did u get your replicas from and do they ship to your house ready to be installed

I had my Hellcat reps and the atturos on my car for almost 2 years now. It’s time to change the tires. They held up good for me for the price. You should be fine and not have to worry about the the tires up front but still watch out just in the off chance that you may need an alignment. I have no complaints about my wheels and tires. I also think just a mid muffler delete maybe the only thing you’ll really need to make that monster sound off without being borderline obnoxious.

You did good Bruh, car looks awesome. Good job. Enjoy.

Looks great bud!! If it were up to me, I’d definitely buy black lug nuts to really complete the look.

If you live in California don't mess with your mufflers 1.000 fine that's the new law. It sounds awesome leave it stock

Looks good. Getting ready to do my RT challenger

Nice!!! Love the rims. Thinking about getting the Hellcat Rims for my 392 Daytona

if you change to stock tires is is mandatory that you change the rim, if going from 245/45/20 to 275/40/20?

Great Vid, I am really late finding your vid, just curious did you need spacers for each wheel? I think I seen upper control arm very close to that tire. I have 21 GT same body, I think those wheels can fit my car. Thanks

Love your charger bro and keep going a great job👍👍👍👍

Hey bro, do you have a direct link to where you bought your set from?

yes！👍🏼look so much better！great upgrade！

Skip the CAI and use the Hellcat lower air box and tube. cheaper and more effective..

Subscribed, great video. Always fun watching someone else have fun with their car. The wider tires look great, truly think you need to flat black those lug nuts though, chrome just doesn't look right. I'm getting ready to buy a 19 Charger Scat Pack tomorrow so all these videos have helped me understand what I'm getting into so appreciate all the hard work with info. So question, with the sound car makes which is phenomenal, do you feel you get a lot more attention from the police? Just curious.

I have this same car same color! Except mines an x cop car I did the same with mine .. hell cat rims! Going for 20 inchers

Looks dope! Keep doing your thing man.

Hey bro congratulations on your rt! I have a SRT go mango charger I'd of gave you mine. However, keep up the good work champ and screw the haters bro! Do what you can and want. Ps I'm running atturo tires on my srt and LOVE THEM! Great tires and awesome grip.

Flush is better. Stance is perfect. Great video bro. Hellcats forever !

Wondering if the bigger tires effect the mph reading. Or are they just wider?? Im "downsizing" from a lifted truck to a r/t charger. And the larger tires on my truck effect the computers mph/mpg, I custom tuned my truck which included calibrating the computer. could be going faster than the gages say if they are not calibrated.

Black on black is sick. My favorite part is the taillights

Bro those hellcat style wheels look dope, better for performance grip as well! Love the black out theme, those wheels really tie in with the tint and taillights. You should consider removing all the emblems on the back. This is my first video, I’m subbed bro, big mopar muscle fan. Have you looked into Kooks headers at all? Kooks also sells a sweet exhaust system......

You need lowering springs bro lol

how have the 275's been working out for ya????? they do not recommend putting 275's on a 9" wheel. it does look prefect............. Also what is the wheel offset?

after having a challenger what made you lean towards a charger , chargers are awesome but im just curious what your deciding factor was

Is there a reason you didn’t go with the exact replica of the rims come on the scat pack with dynamics package?

You think 295 would fit on a challenger or should I go with 275

Did these end up rubbing? That tire was real close to the suspension. I'm thinking about getting this same setup on my charger, didn't want to get into something that wasn't going to work.

Is that considered a matte black finish? Love the car btw👍🏼

I bought a '18 R/T brand new in April of 2018. The 1st thing I did was change the brakes to EBC Slotted and drilled rotors and EBC Carbon fiber/ ceramic hybrid pads. The OEM brakes were horrible.

Dude you need to add 1in or 1.5in wheel spacer on the rear. Your fronts look good just barely sticking out of the rim. You need to get the rear tires sticking out past the finder lip just a bit like the front.

Nicely done Sir I got same rim n 24×10 for a different vehicle going with 295/35r24 n the rear 305/35r24

Gorgeous car my friend. Powder coat the the calipers gloss black and a satin black hood wrap is that's left to do!

You want lighter wheels not heavier! Just going to lead to control arms and bushings wearing out more quickly!

I may have missed the size of the new tires. Are they 275/40/20 or 275/45/20, and are their any issues with them ?

Factory reproductions has some of the cleanest hellcat reps (FR70) for a great price, I run 10.5 on the rear, 9.5 on the fronts on my 392.Ordered some OEM SRT center caps that fit as well.

Looking good. Do it‼️ I love the new mods👌🏽💯

What's the actual size with offset? Didn't catch it in the video...

What size of wheels and tires would you recommend for the 2019 charger R/Ts? Also what brand of tires would you also recommend?

Congrats love the charger 🤘🏽❤️

.... try 3 mm spacers all the way around that are “ hub centric “ to solve that clearance issue ! ! 👍🏻 Looks fantastic ! 😎😎😎😎😎

Looks good dude enjoy the car!

What Did you order the black plate from?

Have you had any rubbing issues since going bigger in wheel size? Has it compromised turning or any bottoming out issues?

Question I just bought some oem replicas for my skatpack i will be getting them put on the week question will my lugs on the original rims fit the replicas

Is there a performance difference between rt plus and rt regular

Ik it's been 3 years but if anyone knows what that part of the car is called like the cover above the tire 3:17 bc Ive been trying to buy a piece like this for my car but I don't know what it's called

I Like When The Tires Do The Skrt❤But Your. channel never gets boring🙌

I’d stay with the OEM lugs. I wouldn’t worry about the locks. Realistically in today’s day and age, nobody is gonna just steal your wheels. They’re gonna take the whole car. So I wouldn’t worry about not having locks. IMO.

The murdered out look greats brotha pro line kit would make the exterior just look perfect , welcome to the charger gang brotha

Love the charger

I put the same rims on my 17 challenger with some 305 nitto's on the back looks cool

Where did you get the rims and tires from? Also did they put the Sensors on them?

Since getting them have yu had any problems with the tire fit since it was so close to that arm underneath. Like it yu hit a bump.?

Question. I have a 2019 SXT. Would the same hellcat tires work for my model you think? If so, can you link me to where you got the hellcat tires?

Car looks great with the new wheels bro!👍🏽

lost power when i did this . the extra weight showed significantly , didnt realize till i put my oem alloys back on , must have gained 20+hp back.

Where did you get the wheels and tires?, any rubbing issues?

Nice car .are those gloss black or matte black rims ?

How have they held up for replicas so far .. any bends or cracks ?

Did you use any particular website to get the rims or any other stuff you bought for the charger? I just got a 2019 RT and need a good site to purchase

at 6:30 what was more closest to the arm, the rim or the tire?

Oh also do a close airbox set up for your intake system or LMI intake both bring more cooler air then the open filters like k&n etc

Where can I get an r/t plus and is that y the r/t logo is red?

Nice wheels looks really good great upgrade

You should get some wheel locks for your rims. When I got my Scat Pack they came with them which I was grateful for. Your charger looks really good with those wheels. I’m hoping I can get some Ferrada wheels for mine this year 🤙🏻

I wish I'd seen this video sooner. I'd have loved to snag your old rims for my '14 RT.

Looks good I got some hellcat reps months ago for my blacktop charger haven’t had time to put them on though

Wheels look good Man!! Now it’s time to bring that bad boy out of the clouds and finish up the look with the right stance for better handling for when u get those go fast mods.

I know this is newer and higher performance, but I like the look of the older 6-banger (Challenger ?) he had - it looked more retro - muscle car.

The tire size needs to be updated in the computer. Need a taser to do that though. The speedo will be off by a couple MPH until you change it.

You should film a little time lapse and the process of you putting on the tires and stuff like that :) I like seeing the process

Do muffler delete, leave the valves. U can control sound alil with them but it's still loud regardless.

Looks great. I would paint the lug nuts black like you did the center caps.

just need the SRT badge and hellcat logo and its officially a hellcat lol

Do you have rubbing on your tiers or fitment is perfect

How would you feel about adding a wicker bill? They look absolutely great on the scat packs that I’ve seen. That would basically complete the look in my opinion

Finally traded in the Challenger! Besides the obvious power of the Hemi, how did the trade in go? Get a good deal? Or took a hit in valuation? Payments and insurance up significantly?

What are you using to wash your car?

From my understanding the 275 wouldn't fit or are not recommended for this car. I'm looking into doing the same size like you did. Thoughts?

Add a Pushbar and all the led color changing 👍

I have actually smoked a rt with my ram 1500 I love putting it down on the unsuspecting.

I would have just powder coated stock 🔥

Did the fronts ever rub? I'm trying to get 275s on all four wheels for my RT

What size is this exactly?

Corsa exhaust 👍👍

Get 2 Red 345 fender badges to break it up a little ...also paint the Calipers at some point too

what did you do for the side markers? decals or did you buy special ones?

awesome video man