FRESHENING UP JUNKYARD 5.3 FOR LS SWAP - Can we get another 100K miles for $300? - UTX

Don't NOTCH That FRAME! - Fabricating CUSTOM AC Compressor Bracket for LS SWAP - UTX

ЛЕБЕДЕВ у ДУДЯ: муху не обманешь 😁 [Пародия]

Алексей Воробьев - Всё остальное - лишь товар. «Профессор Тод Лебен» (лекция №5) Автор - А.Воробьев

Five golden dives ahead of the men's synchronised 10m platform diving final

РЕАЛИТИ - 5 СЕРИЯ. ШЕЙХ VS ТОРНИКЕ. СТЫЧКА: ЗОРАН - АНИМЕШНИК. БОИ 1/8. НАКАЗАНИЕ СИНИХ. ФУТБОЛ

GOT ME UNDER PRESSURE - Installing EVAP System - SQUAREBODY 6.0 LS Swap - UTX

Ugly Truck Experience

Подписаться 44 тыс.

Просмотров 7 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Today at Ugly Truck, we're back on the 1986 Chevy C10 and building the EVAP system. We'll use the purge solenoid on the LS intake, so we start by bending steel lines back to both fuel tanks. Next, we add a couple check valves to ensure the tank doesn't build pressure. We don't have room for a carbon canister on this truck, but we talk about the benefits and how to add one if you can.
For more LS swap tips and tricks, click here! • LS SWAPS - Tips & Tric...
Follow us on Facebook! uglytruck
Check us out on Instagram! @uglytruckexperience
Want to send us something? (NEW address!)
7915 E. Division St.
Strafford, MO 65757
K35OPB0FJGEDPKGE
#lsswap #ls #squarebody #c10 #k10 #squarebodychevy #shopdog #oreillyautoparts #jegs #summit #springfieldmo #coupleswhowrenchtogether

Авто/Мото

Опубликовано:

10 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@Johnny-jr2lq 22 дня назад

Office space was a good movie !!!!

@UglyTruckExperience 21 день назад

One of our faves! Thanks for tuning in! --Emily and Jerry

@darrin44667 Год назад

Timely video, thanks. Just git my 5.3 running in my El Camino and I was overcome with fumes last week. From your video I realized that my purge valve was missing from my intake manifold and I removed the connector from the harness. Today's project was re-pinning the harness and installing the valve. I'm waiting for line to come in so I can plumb everything.

@UglyTruckExperience Год назад

Glad you got it figured out! Thanks for tuning in, Darrin!

@RaysLaughsAndLyrics Год назад

Explaining Volatility Apparatus Perfectly Young Jerry loved puzzle rings. The twists and bends intrigued. From past, new interest brings. He makes anew old school rigs. Emily does help with his build. Camera work, + mig weld torch. Keeping sodas on hand + chilled No time fer sitting on the porch. Not a plumbing video is this here. Tis not a Dee👁️Why tub install. No pipe wrench nor crack appear Yes, it will assist an El Ess install. Do watch with interest if you will. (Special focus 4 Square Bod folks) Very educational .. a time to chill With Ripley the pooch ' an sum jokes. BTW.. 83 Okay count on this video.

@UglyTruckExperience Год назад

👏👏👏 Thanks Ray Bann! And thanks for joining us on Squarebody Stuff's Live on Tuesday!!

@RaysLaughsAndLyrics Год назад

@@UglyTruckExperience It was fun! BTW Just added an edit... 83 Okay count on this video🏁

@nickhattler8236 Год назад

Good insight on this subject, thank you!

@UglyTruckExperience Год назад

Thanks Nick! I think you asked about it on our Live last time, so hopefully we answered some questions. I'm way behind on FB messages, too... I'll try to pin Jerry down and get back to you over there! We appreciate you watching! --Emily

@snowed500 8 месяцев назад

"How's he know where we're going?" 🤣...Great movie and video!

@UglyTruckExperience 8 месяцев назад

One of our favorite movies! 😆 Thanks for tuning in! --Emily and Jerry

@LL122001 8 месяцев назад

GREAT VIDEOS

@UglyTruckExperience 8 месяцев назад

Thanks LL! We appreciate you watching! Emily and Jerry

@benjaminnafarrate5550 Год назад

Thanks Jerry. I have plenty of room. It is a SBC 305, mechanical fuel pump, Edelbrock intake manifold and 650 cfm carburetor, original style gas tank that was replaced a few years back. I will try to add a new canister in the stock location to see if that helps.

@UglyTruckExperience Год назад

Sounds good. Let us know how it goes. Thanks Jerry

@claytonhaske Год назад

You guys are such a great father/daughter team.

@nickhattler8236 Год назад

😂

@UglyTruckExperience Год назад

Thanks Clayton! But Jerry and I are actually married. I'm very lucky to have found someone who lets me tag along in the shop and ask dumb questions! 🤣 We appreciate you watching our stuff! --Emily

@lubblegarage Год назад

Hopefully he was saying this tongue n cheek

@claytonhaske Год назад

@Lubble Garage I actually thought it was her grandfather at first 😬

@GrandPitoVic Год назад

You guys are funny. Some of the little jokes and little side remarks is what makes it so fun to watch. Not just really good info.

@felixgutierrez3536 6 месяцев назад

Hey Jerry, love the videos. You too are life savers. Keep it up. I’m doing my first Ls swap on my 85 c10 and I just installed the fuel system but didn’t do anything with the vent port now I smell gas in garage. So I came across your video. So to make it simple just run a line from the vent port on the sending unit straight over to the evap valve solenoid on the intake?? Also do you have to hook up the connector to the evap solenoid or just the line??😩🤔

@UglyTruckExperience 6 месяцев назад

You will need to connect the connector to the solenoid. The solenoid is normally closed, so put a piece of vacuum to it and see if you can suck through it. If you can't, the valve is ok and you will just need to run your vacuum from sending unit to it and plug it in. Jerry

@felixgutierrez3536 6 месяцев назад

@@UglyTruckExperience thank you Jerry! 🫡

@randyb6881 2 месяца назад

Where do you get the hard line? Both my Napa and Oreillys can’t seem to find it. Thanks for the great videos!

@UglyTruckExperience 2 месяца назад

Hi Randy! We used to buy the 25 ft rolls on Amazon, but we've since figured out that it's easier to buy straight sticks from O'Reilly instead of trying to straighten the rolls. A 72" stick of 1/4" is part number PA472. The universal brake lines are hard to look up, so sometimes we just ask to go back and look at what they have. Hope this helps! Thanks for tuning in!

@lubblegarage Год назад

So, I have my evap programmed out and capped. I am using a tanks inc tank and pump with a vent tube / inline roll over valve only. I am getting gas fumes in the garage and am thinking about simply adding a DIY carbon filter canister and use your idea of the in and out check valves. Any plans on a DIY carbon filter using a pvc pipe or anything like that? BTW you missed a couple of clamps LOL

@UglyTruckExperience Год назад

I knew someone would call us out for those clamps!!! 🤣 You might be ok with just adding the check valves. The .7 PSI it takes to open the valve in either direction might be enough to keep the vapor in. If not, you could always add a carbon canister from there. We haven't done any DIY canisters, but that's really interesting! Looks like you can get everything you need on Amazon. Let us know how it goes! Thanks for tuning in! --Emily and Jerry

@sampedigo3579 5 месяцев назад

Thanks for the video, Jerry . I am working on undoing most of the stuff the previous owner did on my 79. Still has the 350 but with the EGR and EFE systems deleted. Fuel canister was all disconnected. I’ve spent the day trying to make sure I understand how I want to put it back and play. But I’m a little confused with the ports on the five port canister. Service manual doesn’t help a lot. my plan was to run the vent line from the tank to the canister vent port, obviously, and then, from one of the purge ports, T into the PCV line that runs back to the carburetor. Do I just cap off all the other ports ? Anything I’m missing here?

@UglyTruckExperience 5 месяцев назад

Hey Sam. I would just run the line from your tank to the canister and cap the rest of the lines off to start with. If that takes care of your vapor problems, then you are good to go. Tying into the vacuum might just create a headache for you. The original vacuum that went to that canister was metered and timed so it wasn't just a constant supply of manifold vacuum going to the canister. Jerry

@netster7601 Год назад

good afternoon sorry I missed you again on your Live

@UglyTruckExperience Год назад

Hi Alonso! Hopefully you can join us next time! June 25th at 8:00 PM for the AC bracket drawing!

@netster7601 Год назад

I'll put you on my calendar

@rileyadams2225 Месяц назад

Great video man! Im trying to find a way to get the evap to work on my 96 silverado LS swap. I dont really want to add all the extra sensors that the LS harness needs for EVAP. The way I see it, I have 2 options, and I was hoping you could give me some advice. Option one: use only the purge solenoid connector and eliminate the tank pressure sensor and canister vent valve connections from the LS harness, and make a line going from the LS solenoid to the factory charcoal canister. Option two: eliminate all the EVAP electronics from the LS harness, and just have a line going from factory canister to somewhere on the intake tubing before the throttle body, maybe close to the air filter. Do you know if there is any reason why either of these wouldn't work? Thanks!

@UglyTruckExperience Месяц назад

Hello Riley. Depending on what your donor ls harness came from or if you are using a aftermarket harness. The only wiring for the evap in the harness is the wiring running to the purge valve solenoid on top of the intake. The wiring that runs down to the tank is in a separate harness that runs down the side of the frame. You can run a evap line to that solenoid and everything will work fine, even if you have had the evap removed from the ECM it will still function like normal. If you live in a warmer climate, I would go with the purge solenoid. If not, I would just vent it at the tank. Go the simplest route and if you end up smelling fuel you could go a different direction if needed. Thanks. Sorry for the late response. Jerry

@GrandPitoVic Год назад

Omg!!!! This one us great guys. I am doing the Ls3 03' Criwn Vic swap. And I was wondering about kinda getting a evap working just because. I just dropped the block and crank and rods off at the machine shop on Tuesday. I can't wait. Question????? If I take that Gen 4 block and drop in a 24x crank and 1x cam sprocket and run a Gen3 harness and Puter. Will it still function really well?. I don't want to fight with all the extra with the Gen 4 harness. Except if I decide to run a 6L80 then I'll have to stay Gen 4. I love the content guys. I always wait for the next one to drop.

@UglyTruckExperience Год назад

Hey Hugh! Yep, what you're talking about doing should work great! Much simpler to go with the Gen 3 harness and PCM. 👍 Thanks for tuning in! We always appreciate you watching! 😊 --Emily and Jerry

@GrandPitoVic Год назад

Thank you very much.

@benjaminnafarrate5550 Год назад

Great video again. I have an 81 g body that had the emission removed years ago small block 305, but I have gas smell n the garage. I have the vent line in the front still just open. What would you recommended I do to keep the smell down? It’s a “Antique Vehicle” so no emissions are required. I also have my C10 that I’m working that will have the same issue? Can I get a canister and just plug in the fuel tank line? Do I need to plug the other lines? Should i run a line back to a 2 barbed PCV valve on the valve cover? Does a need an inlet line open? Any help or suggestions would be greatly appreciate. Thanks!

@UglyTruckExperience Год назад

Hello Benjamin. If you have room for a canister somewhere, I would try adding that to your fuel tank vapor line and see if that takes care of it. It will help I am sure, but if it does not do enough you may want to tie it into your vacuum system somehow. Depending on what you have for a fuel system. Let me know what you do and how it goes. Thanks. Jerry

@GrandPitoVic Год назад

Starting a new thread. Lol. In doing the Ls3/4L80 swap in my 03' Crown vic. Is the a converter to get the original Ford speedo to work with the Chevy speed sensor. They are both digital or what not. They are not cable lol. Even if I have to have it recalibrate. I have the schematics so I can run the original gauges and the original check engine light on the dash. Oil,temp, charging fuel. No tach in the dash. I'll run a column mounted one. The only thing is the speedo. I know there are GPS speeds but if I can I'd like it to look stock. (SLEEPER) LOL.

@UglyTruckExperience Год назад

Hello Hugh. I would send a message to a programmer and see if they are able to change the vss signal going out. I know they are able to change it for the incoming signal. Otherwise you might have to go with a GPS signal generator. That is a interesting swap. Let us know how it's going. Thanks. Jerry

@GrandPitoVic Год назад

Yes sir I will. Thank you for the help. I'm going to be recording it. I haven't seen any extensive builds with the Ls Crown Vics. I saw one where a guy was saying he couldn't find much info on the vic swap so he had to figure it out. So figure I will do it and show right down to the wires to use my original gauges and even the check engine light in the dash. I'm also doing the videos for my grand sons. That way they can do this too if they ever choose to. Thank you Jerry and Emily for your videos and help. By the way, I am going to be using your a/c module to do my a/c for the swap. Thank you again for that one.

@chuckycheese381 Год назад

I was doing a good job keeping up. Until we got to the double check valve, I'm lost as to where they were connected at the filler neck.

@UglyTruckExperience Год назад

They are just tied to the top of neck. They don't really connect to anything. I just put them up as high as possible. Thanks for watching Chucky. We appreciate it. Jerry and Emily

@jimtiberti-zb7kt 5 месяцев назад

Without the canister in place, the only way I can see for air to enter the tank to replace fuel as it’s pumped out is through the check valve at the filler pipe? If not, where does air enter the tank? Thank you.

@UglyTruckExperience 5 месяцев назад

Hello Jim. That is right. If you didn't have a vented fuel filler cap, the only way for the pressure in the tank to be even would be through the check valve. Jerry

@frankgonzalez6872 4 месяца назад

Jerry still having a problem with fuel transfer from left to right. Used fuel lab valves and so far they lasted the longest but it happened again. Any ideas what I can do to keep both tanks. Using walbro pumps. I fallowed your fuel system diagram. Appreciate any feedback thanks

@UglyTruckExperience 4 месяца назад

Hello Frank. You say you used Fuel Lab valves. What did you use as the valve to change your return? Jerry

@jmooney2880 10 месяцев назад

Hey y’all! What brand of cinch pliers and clamps do you use?

@UglyTruckExperience 10 месяцев назад

Hey Mooney! Here's a link to the clamps we buy on Amazon, and the crimper is from Lowe's. They're in the PEX plumbing section. amzn.to/3PIFuUN Thanks for watching! Emily and Jerry

@jmooney2880 10 месяцев назад

@@UglyTruckExperience y’all are awesome! Thanks so much!

@rust_hoarder_garage Год назад

I didn’t think the pcm commanded the purge solenoid to open unless the pressure switch on the canister was made? Otherwise would be a constant lean condition. Without all of the evap hardware I don’t think this will work as is. On my OBD1 gen 2 LT2 swaps I only had the vent line from the tank to the charcoal canister and then to the evap solenoid, there was no other hardware and the vent line on the canister stayed open to fresh air. I believe the evap solenoid was opened based on engine load, but obd2 has more hardware involved. Have you verified that the evap solenoid is being commanded open at idle with only a vent line feeding it and no pcm inputs?

@UglyTruckExperience Год назад

The way you described how you have done it is basically the same system. On this one I did not add the canister but it does work nicely how you describe it. The ECM opens and closes the purge valve very quickly on idle creating just the smallest vacuum leak. The ECM overcomes it by adding what fuel it needs to. When the valve gets stuck open, it does create a lean code. I am not sure if they open in a no load situation like decelerating but they click away on idle. Carburetors did the same thing with timed vacuum ports. Thanks for your comment. I hope my response makes sense. Jerry

@rust_hoarder_garage Год назад

@@UglyTruckExperience understood, I had never heard that the obd2 pcm would turn on the evap solenoid without knowing fuel level or tank pressure. If it does that is great because I prefer to keep evap on my builds. Thanks for the reply!

@UglyTruckExperience Год назад

Thanks RHG. I love the evap also. Jerry

@frankgonzalez6872 Год назад

Can you give me part number for vent check valves and pex clamp size for vent hoses thanks again for your help

@UglyTruckExperience 11 месяцев назад

Hi Frank! Here is a link to the check valves we used. amzn.to/3YuoioG I'm not sure exactly which size clamps Jerry used on this 1/4" line, but here's a link to the kit we buy on Amazon. amzn.to/3OPIvSL Hope this helps! Thanks for tuning in! --Emily

@Kloco78 19 дней назад

So a hose just goes straight to the purge control valve. I’m just asking if so that that will solve all my problems.

@UglyTruckExperience 19 дней назад

Yes, The vent line from the tank goes directly to the purge control valve and also to the carbon canister if you are using one. If you are not using a canister you would need to use a vented fuel cap or install some check valves in order to keep from building pressure in the tank. Jerry

@Kloco78 19 дней назад

@@UglyTruckExperience thank you Mr Jerry. I really appreciate it.

@GrandPitoVic Год назад

How's it going guys? How does the evap solenoid work if it's turned off in the ECM?

@UglyTruckExperience Год назад

The ECM still makes the evap solenoid function like normal. It just does not trigger a check engine light for the evap system. That is the case with all of the emissions that are removed from the ECM. They still work, just no check engine light. Thanks Hugh. Jerry

@GrandPitoVic Год назад

I appreciate that Jerry. I was wanting the evap to work on my 03' Crown Vic Ls3 swap. Thank you sir.

@davidray5213 9 месяцев назад

who does your pcm ? I need one done for a 75 K5 blazer 5.3 lm7 2002

@UglyTruckExperience 9 месяцев назад

We use LT1swap.com for our PCM programming. Thanks for tuning in, David! --Emily and Jerry

@snowed500 8 месяцев назад

Great question I had myself

@jonvasquez4729 Год назад

Watching the video, my daughter says,” Dr Phil works on cars?” . Jerry’s voice…

@UglyTruckExperience Год назад

🤣🤣🤣

@Jesse-lu7bt Год назад

Lot technology

@UglyTruckExperience Год назад

Gotta love it! 😆 Thanks for tuning in!

@thruitallauto2538 Год назад

Is this the first time yall done this

@UglyTruckExperience Год назад

Not the first time doing evap system, but first time doing a video on it. Thanks. Jerry

@thruitallauto2538 Год назад

@@UglyTruckExperience oh ok cause I didn’t do one on mine

@UglyTruckExperience Год назад

You don't have to I guess but when I am doing these for other people I am trying to get rid of any kind of problem they may have. I like to figure out way's to make those things work and make it more enjoyable for them to own that truck. Thanks Thru Itall. We appreciate you watching. Jerry

@thruitallauto2538 Год назад

@@UglyTruckExperience yeah man like watching y’all’s show, but every truck I’ve had with an evap system on it, tge evap system failed, on the 11, 12,07, my 14 has went bad yet tho, I was looking on my square body with the 5.3 . it does have a vent on it, don’t remember we’re I ran it tho,

@UglyTruckExperience Год назад

We haven't had any fail or not work but in some cases have had issues. I had somebody fill both tanks up to the filler cap and it started drawing raw fuel through the evap solenoid. Ran real bad for a few miles. If it had a canister on it, it probably would have been even worse. I think just try to make them simple and do the best it can. Something is better than nothing. Always appreciate your comments. Jerry

Далее

FRESHENING UP JUNKYARD 5.3 FOR LS SWAP - Can we get another 100K miles for $300? - UTX

47:56

FRESHENING UP JUNKYARD 5.3 FOR LS SWAP - Can we get another 100K miles for $300? - UTX

Просмотров 193 тыс.

Don't NOTCH That FRAME! - Fabricating CUSTOM AC Compressor Bracket for LS SWAP - UTX

1:26:06

Don't NOTCH That FRAME! - Fabricating CUSTOM AC Compressor Bracket for LS SWAP - UTX

Просмотров 17 тыс.

ЛЕБЕДЕВ у ДУДЯ: муху не обманешь 😁 [Пародия]

07:36

ЛЕБЕДЕВ у ДУДЯ: муху не обманешь 😁 [Пародия]

Просмотров 655 тыс.

Алексей Воробьев - Всё остальное - лишь товар. «Профессор Тод Лебен» (лекция №5) Автор - А.Воробьев

00:50

Алексей Воробьев - Всё остальное - лишь товар. «Профессор Тод Лебен» (лекция №5) Автор - А.Воробьев

Просмотров 778 тыс.

Five golden dives ahead of the men's synchronised 10m platform diving final

00:25

Five golden dives ahead of the men's synchronised 10m platform diving final

Просмотров 11 млн

РЕАЛИТИ - 5 СЕРИЯ. ШЕЙХ VS ТОРНИКЕ. СТЫЧКА: ЗОРАН - АНИМЕШНИК. БОИ 1/8. НАКАЗАНИЕ СИНИХ. ФУТБОЛ

1:27:23

РЕАЛИТИ - 5 СЕРИЯ. ШЕЙХ VS ТОРНИКЕ. СТЫЧКА: ЗОРАН - АНИМЕШНИК. БОИ 1/8. НАКАЗАНИЕ СИНИХ. ФУТБОЛ

Просмотров 245 тыс.

Chillin' With My OHMies - Wiring Original TEMP + OIL PRESSURE GAUGES for LS Swap - UTX

50:59

Chillin' With My OHMies - Wiring Original TEMP + OIL PRESSURE GAUGES for LS Swap - UTX

Просмотров 26 тыс.

Return vs Returnless Fuel Systems: Which is Right for Me?

14:49

Return vs Returnless Fuel Systems: Which is Right for Me?

Просмотров 27 тыс.

Simple LS Swap fuel system for a C10

11:46

Simple LS Swap fuel system for a C10

Просмотров 22 тыс.

Installing OEM FUSE BOX For LS SWAP - Simple HIDDEN Brackets - UTX

53:50

Installing OEM FUSE BOX For LS SWAP - Simple HIDDEN Brackets - UTX

Просмотров 11 тыс.

What I've learned from LS swapping my Squarebody C10

12:44

What I've learned from LS swapping my Squarebody C10

Просмотров 17 тыс.

CHEAP LS SWAPS. CAN THEY BE DONE IN 2023? YES!

20:02

CHEAP LS SWAPS. CAN THEY BE DONE IN 2023? YES!

Просмотров 246 тыс.

ls swap fuel injection delivery system design and assembly

24:27

ls swap fuel injection delivery system design and assembly

Просмотров 40 тыс.

DOUBLE TROUBLE! - 85 C10 5.3 LS SWAP - Plumbing Fuel System With Original DUAL TANKS - UTX

48:13

DOUBLE TROUBLE! - 85 C10 5.3 LS SWAP - Plumbing Fuel System With Original DUAL TANKS - UTX

Просмотров 19 тыс.

LS vs LT - Mechanic's HONEST Review! - UTX

1:11:41

LS vs LT - Mechanic's HONEST Review! - UTX

Просмотров 13 тыс.

LS Swap DONOR TEARDOWN - What PARTS do you NEED? - UTX

1:17:17

LS Swap DONOR TEARDOWN - What PARTS do you NEED? - UTX

Просмотров 62 тыс.

Керамический лак, шик-шик, мазафак😉 #кузовнойремонт #автосервис #автомаляр #diy

1:00

Керамический лак, шик-шик, мазафак😉 #кузовнойремонт #автосервис #автомаляр #diy

Просмотров 1,3 млн

Обзор самых популярных пикапов😱 #toyota #honda #chevrolet #gmc #ford #dodge

0:58

Обзор самых популярных пикапов😱 #toyota #honda #chevrolet #gmc #ford #dodge

Просмотров 10 млн

ВЫХЛОП КАК У АХМЕДА WENGALLBI

0:59

ВЫХЛОП КАК У АХМЕДА WENGALLBI

Просмотров 839 тыс.

МотоТаня погибла в ДТП. #новости #мото #память

0:56

МотоТаня погибла в ДТП. #новости #мото #память

Просмотров 6 млн

Китайские свалки новых авто и велосипедов

1:00

Китайские свалки новых авто и велосипедов

Просмотров 935 тыс.

Зачем нужен УАЗ буханка? 😂 #юмор #михеевипавлов #смех

0:57

Зачем нужен УАЗ буханка? 😂 #юмор #михеевипавлов #смех

Просмотров 324 тыс.

#يوميات_سائق_شاحنة_في_المانيا_ابوعباس

0:26

#يوميات_سائق_شاحنة_في_المانيا_ابوعباس

Просмотров 9 млн