Great wall x240 v240 problems not selecting 4L fix other signs 2H 4H 4L lights and 4wd symbol constantly displaying whilst in all modes located in the back of the gearbox part name- 4WD transfer actuator switch
Hey All My mechanic was not willing to order the new motor as he said there were several different part numbers? Some will not fit? I have ordered the switch to see of this solves the issue of 4x4 not engaging, but will look at the Transfer Switch Motor after that. Thanks for Video Michael. Subbed👍
Thanks for sharing! I'm going to have to try this. I've got a flashing 4wd light on my x240 which doesn't go away - it will click into 4H but when I select 4L absolutely nothing. I just swapped the transfer case actuator - but that didn't solve it so maybe I'll try swapping this one.
Also if its going into low range and 4wd light is still flashing test if front diff is actually ingaged by turning in a circle full lock rear wheels should draging a little,if its not the problem lies in the front diff actuator, check fuse on drivers side in cab check wires replace front diff actuator 1 plug and some bolts
Has the fuel pump stopped working ?? I had symptoms of bad fuel pump no start no sound of pump ..but it was a broken wire under the drivers seat,I replaced the fuel pump to no avail before I found broken wires ,the access is on top of the fuel tank, need to undo a few fuel lines and plugs remove fuel tank access is a threaded cap on topside of fuel tank.
I've replaced my transfer case motor the motor is working fine you can hear it select 4h an 4l an 2wd but the 4wd light is still staying on I've checked the breather hose still not going away an help greatly
If its selecting high and low but light not going out check the fuse inside cab on driver side labelled 4wd front diff ,if not its the front diff actuator faulty needs to be replaced its similar looking to the one on the transfer,with a plug and bolts
Hiya Michael I have the same model/year - except my GW X240 won't disengage from 4wd to 2wd. Did you fit a factory actuator switch or buy aftermarket.?
Hi, i would try swapping the transfer case switch motor it's just a few bolts and a plug , you could get a new one online maybe ebay or an auto wreckers.shop wanted 10x price..... For the problem I had (not selecting 4L) the actuator was the problem i bought it cheap online new , but I think try the motor in your case ,you could try remove the transfer case switch motor then select 2wd if motor is not spinning it's probably the problem , you could do the same test without removing motor and listen for it clicking when selecting 2wd if no clicking sound is heard probably the motor is at fault (engine off ignition on) while selecting :)
@@GLOBAL-INTIFADA yes I also had to change the actuator motor because it wouldn't select 4wd it's 3 bolts and bracket and a plug to take it off, if you just take it off and leave it plugged in you can test it . Turn ignition on and get someone to switch between 2wd 4wd and observe the motor it should be turning if it's not then will need new actuator motor
hello, I have a problem sometimes the car goes wrong as if it went with a cylinder less then when I disconnect and reconnect the battery it is resolved. what could be I think the ecu or infection ?
@@michaelkieran3006 hello I changed the spark plugs and the good but the problem from the same seems to go to 3 cylinders and since I put a fuel additive and worsened. what do you suggest me? thank you very much
@@michaelkieran3006 oh yeah cool I’ll give it a try thanks mate ledgend I might ask ya some questions in the future just incase I get stuck if you don’t mind
