Hackintosh Ventura - In-Depth Guide (Windows Method) 

This guide is the most accurate one that i found. Thanks to that and to the dortania guide i hackintoshed a MSI GL75 10th gen I7, 32gb of ram and it worked perfectly almost first time (except for wifi and bluetooth)

Thank you! Got mine up and running!!

You are a true Technologist my brother 💯 Thank you for making this video. 🙏 Watched it fully last night along side your 26 min version and it really helped me to not only finally understand the process but also how to try it now myself without a configurator. 💪 Please keep em coming!! 🔥 LIKED & SUBBED

Best Guide ever thank u verry much!

Thank you for this video, i already did a build before with AMD. Switched now too Intel, was quite a hassel with Raptor Lake (13th Gen, there is no official guide). But nice too have a video like this and go trough everything along side too checkup. Got everything working, even P-Cores and E-Cores so it has fully support till 5.4 GHz :) MacOS: Ventura Intel i7 13700k AMD 6600

Gotta tell ya this is by far the most in depth and accurate guide I’ve come across.I have a system similar to yours. I7 4790k but it’s in an hp g1 800 sff paired with an lp rx550 4gb. I patched the Gpu and with the t919 everything works flawlessly. Only issue I’m having is I cant use the hdmi port on the Gpu for dual monitor support. I added framebuffer patches for the connector and went from no signal at to a color flash followed by blank screen to no signal every 10 seconds. I dont quite understand how to patch the busid but I’m guessing that’s what I need to do since I’ve tried everything else. Funny thing is I can use an hdmi cable if I plug it into a dp to hdmi adapter via the dp port. Smbios I use is iMac18,3. Could that be my issue?

thank you bro great video

Great video and info - needed a bit of hand holding as my laptop requires a lot of Kexts and arguments in the config.plist and it's a bit overwhelming - great job!

The set up progress it is so real like you get to choose your language at the beginning just like a normal MacBooks

Your guide was truly very useful. I cant thank you enough!!! And I managed to setup a Intel B660M and i3 12100 based system with it. But I had to struggle & search around the internet to get the installer run properly, but in the end the it was very well worth it and your guide IMMENSELY helped me out understanding the all the details. I have following request for you: Please make a video guide on how to maintain and keep the hackintosh stable. Please make a video guide on dual-booting with existing windows installation. And lastly if possible please make a guide for 12th and 13th Gen Intel platforms opencore and plist setup. The reason I'm requesting is because NONE of the youtube videos goes this deep and comprehensive like your videos. (I watched close to 80-90 videos and almost all of them were based on pre-baked EFIs and installation ISOs ). Kind and best Regards!!!

big thanks 🥳🙏

I followed your guide, it was very detailed! I'm having an issue where no drives show up on the MacOS install screen. Even when I click show all devices, I only see the installer. I made sure to set my BIOS settings according to the Dortania guide (i.e. AHCI mode, etc.). Do you know why this could be? My machine has a 10700k and my motherboard is an MSI MPG B460i.

Amazing tutorial, I was wondering if it works for laptops as well

Thank you for going over every? most? steps in building the USB installer. One difference I saw with mine is that.. during the first reboot, instead of text based loader screen,,, I had GUI icons? other than that. all worked. Also, during the setup screen, I didn't get choose language but straight to country selection. Also, my USB Applekeyboard did not get recognized. odd.

Did the bios settings that enabled and disabled interfere with the performance once you are in windows? Thanks

i have i7 4th gen with gtx 720m graphic and intel hd4400 will ventura work?

Hey brother great video, just one question after successfully installing OS can I boot into my windows 10 back, like this process is a dualboot or will it override my windows?

Hello! Thanks a lot for your guide, it was extremely helpful) Did you able to make sleep working? In my case i trying many different methods and it won't work((

I'm running stable Catalina Hackintosh using clover (Morgonaut's old guide), What are the upgrade steps to Ventura? Any tutorials for that?

HI followed your guide together with Dortania and managed to get it working now I have Ventura installed but I am having mouse lag issues, my mouse will randomly be laggy but the OS is not lagging. I have mapped my USB using your method already and all my usb ports work. Mobo: ASRock B660M Pro RS/ac CPU: Intel i3-12100F GPU: Gigabyte RX470 Ram: Lexar Ares 16GB running at 2666Mhz Storage: Lexar NV620 256GB SMBIOS: MacPro7,1 Please let me know what I should try to fix this

Hey I fallowed your tutorial and I keep getting halted on critical error when I go to do first boot any suggestions on how to fix ?

Any specific reason to use SSDT time on linux while you can run it on Windows it self

Hope this steps will work on my old laptop intel i3 (Arrandale cpu code name), legacy bios gateway

Hello, have got a question : Does it work with an apu, like the ryzen 7 4800h?

I have follow the steps using your video guide. I am using fenvi T919 PCI-E WiFi Adapter. I am having bluetooth issue. It could not on. Can you help me to resolve issue?

Hi can you show me where is the part you install vga driver.. because it should be not work automaticly right?

Would be a lot of expense for you but any chance of doing a Ryzentosh in depth guide of the newer way of creating R/Hackintosh I keep getting things wrong and it’s very frustrating 🙏🏻🙏🏻🙏🏻😉😉😉 still got a stable Catalina build from way back when, in the Opencore 0.5.9 Days 🤣🤣🤣

Will it work pretty much the same way if I'm creating the usb on a current hackintosh? I need to upgrade to ventura from an older version

hey, is there any method to download macos ventura full iso/dmg offline version on windows PC?

hello , i have a question , i don't have Ethernet port on my pc can y o u throw it and install ventura OS normally ?

Got running off the USB. Used mount efi and copied the two folders to the root of the mount but pc won't boot. Thoughts?

I cant login to the appstore but if can login to applemusic, imassage, facetime and system settings, can you give me a clue what is going on please

One question if I install mac on my ssd will I be able to use files from my HDD like photos

After many tries, I successfully got up to the USB Mapping part (last step before removing verbose and debugging) with my HP ProDesk 600 G4 and after a long reboot I have no keyboard and mouse or any USB ports. Not sure what I did wrong. Looks like I am starting over.... again :(

Just a little bit problem that I have booted into the recovery of the MacOS (Online Installer) and there is no Internet connection in my PC. I tried to throw all off the Ethernet kexts into th Kexts Folder but it still don't have Internet. Does anyone have seen this problem? I use H81 Gigabyte DS2 and i3 4130

24:18 I'm wondering if you even need to define device-id as it seems your CPU has HD 4600 instead of HD 4400 (that latter needs to be faked as HD 4600?) Same with PciRoot(0x0)/Pci(0x1b,0x0) section - if you are not going to use it, then I think it is good to remove it.

Hey, after the first phrase of reboot, it went to the reboot loop, any idea?

Hello help me trackpad not working on disk utility and installer option All kext of voodoo are installed i5 8th gen Intel UHD 620 graphics

HI My system Configuration will be AMD Ryzen 5 3400G with Radeon Vega Graphics 3.70 Ghz . Can i Install MacOS Ventura with these steps

OC configuration failed on after booting, how to fix that? All my steps are correct and the config.plist is correct to , what is the mistake I made then? Please help me to fix that

everything went fine. but my keyboard, trackpad is not working. The internal HDD is not showing up in disk untility of mac. any solutions. pls

Great guide! However, I don’t know how to fix my HDMI ports on my laptop not working

I want to build for i7 12700k running on gigabyte b760 M, gpu radeon rx 560 please can you help me with this?

Hey is there any method that can make nvidia gpus work on ventura?

Is It Work With Ryzen 3400g processor ? and motherboard B450M H?

🎯 Key Takeaways for quick navigation: 00:00 🖥️ *The video is about installing macOS Ventura on a Haswell PC using the Windows 10 operating system.* 01:20 📦 *You'll need specific hardware components like an AMD GPU (Nvidia not supported), SSD storage, an Intel chipset for Ethernet, and a compatible Wi-Fi/Bluetooth card.* 02:59 💻 *You can choose between Windows 10, Mac OS, or Linux as your primary operating system for the installation process.* 03:26 ⚙️ *Make sure to update your BIOS to the latest version before proceeding.* 06:01 📀 *Creating a bootable USB drive using Rufus is recommended for the installation process.* 13:52 🐧 *If generating ACPI SSDTs, using a Linux installation on a separate USB drive is suggested for efficiency.* 16:34 📂 *You need to gather various files, including drivers and EFI files, and configure your config.plist file.* 26:56 🍎 *Selecting the correct SMBIOS (system profile) for your hardware is crucial for a successful installation.* 30:53 ⚙️ *Configure your computer's BIOS settings as recommended in the Dortania guide for the installation process.* 31:36 ⚙️ *Configure BIOS settings for Hackintosh by going to the Advanced section and ensuring proper settings, such as SATA configuration (AHCI), disabling VTD, and adjusting Graphics configuration for dedicated graphics cards.* 36:29 💻 *If you encounter a black screen during installation, consider downloading and installing "WhateverGreen" to address graphics-related issues.* 37:35 📝 *Disabling Compatibility Support Module (CSM) in the BIOS may be necessary to ensure a successful Hackintosh installation.* 38:27 🌐 *After installing macOS Ventura, use a tool like "Mount EFI" to access the EFI partition and copy necessary files from your USB drive to your hard disk's EFI partition for proper booting.* 41:05 📦 *To configure USB ports, use "USBMap" to identify and map the USB ports on your computer. Create a USB map, copy it to the EFI partition, and update your config.plist for USB configuration.* 44:13 🚀 *Transition from debug mode to release mode by downloading release versions of necessary OpenCore files, drivers, and kexts. Replace debug versions with release versions for improved performance.* 48:22 🖥️ *Customize the OpenCore graphical user interface (GUI) by configuring options like "picker mode," "picker attributes," and "picker variant" in your config.plist.* 50:27 🔊 *Optionally, enable the Mac boot chime in OpenCore settings and adjust boot arguments to remove verbose mode for a smoother Hackintosh experience.* Made with HARPA AI

i cant find anything for alder lake laptops with nvidia gpu...can you help me out

I follow your all guides but I always stuck at " Failed to detect supported SuperIO cheap" can you help me to slove this. Love from Nepal❤❤

Can hackintosh be the reason of slowly bricking parts of laptop?

it says that i need an internet connection to install macOS, but i cant get the internet to work

Start::512:successfully initialized AHCI controller (frozen in the log m in recovery dmg file)

Why doesn't it work on a laptop with integrated AMD processors?

When i go to bootmenu for the first time to install macos. than i click it says ok. and stuck here.. any idea what is wrong... please help me

i get a error that says that python is not installed but it is infact installed

The Apple folder isn’t appearing within my efi partition what should I do?

sorry, can my ryzen 5 3550h work with this guide

You can do the ssdt thing in windows also

plz post the Z790 Ud ax 13 gen i9

How about XHCI-unsupported.kext and USBInjectAll.kext we no need use it?

is Whatevergreen ktext required?

Plz help idk know why my wifi isn't working when i'm on recovery mac os page

I enabled csm and now I can’t get back into the bios

Can you please redo this tutorial again without skipping steps. I would like to see how to install the RX 580. Thank you

it says cant boot, press f1 to retry please help here too

Im seeing some tutorials from youtube and that looks so easy. This one is totally different. GIad that I saw your video. Hope this will work on my PC: i5 11400 Asus rog b560i gaming Asus rog rx5600xt 16gb 3200 ram Nvme drives

Is this dual boot or override windows

Do it on Linux next

15:09

I cant dowlonad MacOS :(

your discord server link?

I’m getting a permission denied when I try to run cp -r Results/ /mnt/ what do I do 🥲

On installing macos It isn’t installing on APFS instead it say use extended ….. etc I don’t know what to do all of my disk are erased🥲