Harley STARTER REBUILD - ALL 1584 cc Harley Davidson

Подписаться 7 тыс.

Просмотров 60 тыс.

50% 1

How To: Replacing the Starter Drive in your Starter (the gear that meshes with the flywheel) instead of buying whole new starter!
*I don't show it but on reassembly grease everything good! Bearings etc)*
TOOLS REQ'D:
9mm Deep Socket (Starter Drive Housing)
3" Extension
8mm Deep Socket (Stator Housing)
Mallet (tap Starter Drive loose)
....And if your not careful and Stator Housing pops apart....
Phillips Head Screwdriver (Housing Back Cover)
Flat Head Screwdriver (to work Brushes around Stator)
*Check out my amazon store for more great tools and products! www.Amazon.com/Shop/REDNECKTECH I greatly appreciate your support of my channel, Thank you!*
Disclaimer: This channel may make a small commission off of any purchases made through affiliate links.
#HarleyStarter #Dyna

Опубликовано:

26 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@alexescobar5707 25 дней назад

Let me say that you’re a life saver. When I got to the part of taking out the 2 Phillips screws I was cussing like a sailor but when you said they are also 9mm bolts and I confirmed it my soul came back to my body. Thank you so much brother.

@jamesmacneil1609 4 года назад

One of the best explained videos I've ever seen. Impressed too, that there was no bad language. Excellent video. Thumbs up.

@ShakirAuto067 3 месяца назад

Good bro 😊

@danielolson9348 5 лет назад

Thank you for the humility. Guaranteed this saved me a ton of time.

@ShakirAuto067 3 месяца назад

Good bro 😊

@johngantner3903 4 года назад

Best tutorial I've stumbled upon... EVER!

@rednecktech82 4 года назад

Thanks alot i appreciate that, glad it was able to help!

@ShakirAuto067 3 месяца назад

Nice bro

@LizakDominik1988 2 месяца назад

Simple and straight to the point. Thanks

@aragos32727 4 года назад

I'm about to do this on my 09 Fat Bob. Thanks for taking the time to make this video.

@ShakirAuto067 3 месяца назад

Nice bro 😊

@1AXMRDR 3 года назад

Mine has been making that sound so I expected the same results but the difference is that my starter is a new larger starter because it was needed when I went from an 80" to a 111" engine. Upon inspection some of the teeth had broken off of the starter ring. I am going to to the high torque clutch basket and starter gear. Less teeth but are more beefy and will spin engine a bit slower. It's worth taking off the primary cover from time to time to inspect whats in there. Great video. Thanks for sharing.

@ShakirAuto067 3 месяца назад

Nice bro

@andrewgettelfinger900 5 лет назад

One of the most helpful videos I’ve seen, thank you!

@ShakirAuto067 3 месяца назад

Good bro

@stefanansorg8220 4 года назад

Thank you so much for your fine video. With your help I could replace my worn out starter clutch without assistance. Big regards!

@ShakirAuto067 3 месяца назад

Good bro 😊

@cordulahink7572 3 года назад

Mate, thanks for the vid , helped me out and gave me the confidence to tackle it myself.

@ShakirAuto067 3 месяца назад

Good bro

@petereriksson9774 5 лет назад

Thnx man. I had this problem on My bike and with the help of your video it is fixed

@ShakirAuto067 3 месяца назад

Good bro

@YourTampaRealtors 4 года назад

Got it done! Thanks, BTW, 9mm deep socket was impossible to find around here. All the sets had 10mm as the littlest. I found that 11/32" was the same size. And yes, that damn thing tried to *spring* apart on me. Thanks again.

@ShakirAuto067 3 месяца назад

Good bro 😊

@edwardbarrow3865 2 года назад

Thank you very much for the video mine turned out to be the relay switch

@rednecktech82 2 года назад

Just replaced that on my bike too, here soon I will be doing a video on diagnosing a "no start".

@ShakirAuto067 3 месяца назад

Good bro

@bobstevenon9525 2 года назад

Great video. Thanks

@zimman20 5 лет назад

This was very helpful, thanks for sharing!

@ShakirAuto067 3 месяца назад

Nice bro

@tyee4u 2 года назад

Great video. Thanks for posting 👍

@rednecktech82 2 года назад

Thank you

@ShakirAuto067 3 месяца назад

Nice bro

@mikeburton1703 Год назад

that is exactly the video i needed to see.........sure made it look simple thanks.....

@ShakirAuto067 3 месяца назад

Nice bro 😊

@ShakirAuto067 3 месяца назад

Good bro 😊

@obfuscated3090 6 лет назад

I put a piece of stiff steel wire or a jewelers screwdriver under each brush spring to hold them back when wiggiling brushes over the commutator.

@roadrunner4677 2 года назад

Great video. Thank you.

@rednecktech82 2 года назад

Thank you I appreciate the support!

@joseyamidgomezatehortua5994 Год назад

Muy buen trabajo 👌👌

@michaelflores9934 6 лет назад

this is exactly what i needed thanks!

@ShakirAuto067 3 месяца назад

Good bro 😊

@TheBlksmitty 5 лет назад

Outstanding Video

@ShakirAuto067 3 месяца назад

Good bro

@fabianhayos7897 3 года назад

gracias por el video, me ayudo bastante

@ShakirAuto067 3 месяца назад

Good bro 😊

@shawnellsworth7623 3 года назад

What is the difference between the 1584 starter And the 1803cc on my 110B?

@bobgibb2781 3 года назад

I popped a new sprag clutch in mine . I was a bit pissed off that the thing had been coated in thick black paint that cracks and flakes off when components are separated .

@ShakirAuto067 3 месяца назад

Good bro

@stodsratrod 6 лет назад

i will agree....!!! THANK YOU so much.....

@ShakirAuto067 3 месяца назад

Nice bro

@minibikeaction4266 3 года назад

Thanks man

@ShakirAuto067 3 месяца назад

Good working bro 💯

@rednecktech82 3 месяца назад

Thank you

@55msdrake 4 месяца назад

What a great, great video.

@ShakirAuto067 3 месяца назад

Good 😊

@CarlosGarcia-ls4hn 4 дня назад

When you took all the parts out of the starter, what did you see that would cause to make that noise?

@L2fish Год назад

Wonder if this is whats wrong with my 08 fat boy, starts fine cold but when hot clunks and grinds. I have learned to bump the starter to ensure its engaged before holding the button down

@strawdogoggie 5 лет назад

Any idea where I could find a back half motor cover? (chrome) I bought a used starter but that back has a stress crack in it. Thanks

@rednecktech82 5 лет назад

my best guess would be Ebay...don't know that just the back of case is sold seperate anywhere. Maybe find a broken "for parts" starter that is chrome.

@nigelren3719 5 лет назад

Mate, thanks

@miguelsalgado4673 3 месяца назад

On the 1584, is it necessary to remove the primary to remove the stsrter?

@rednecktech82 3 месяца назад

No not at all...starter is removed from the passenger side.

@saxonrider78 2 года назад

If you buy a starter from a 1997-2003 Lexus RX 300 and similar , from exactly the same as a Harley starter! But cheaper!

@ShakirAuto067 3 месяца назад

Good bro 😊

@ginocapone7783 Год назад

Nice video what kinda grees did u use to put it back in.

@rednecktech82 Год назад

I would just go to your local supply store and see what electric motor grease they have in stock. Tell them what you're working on and they should be able to stear you right. Mobil has a nice grease available...You'll want something for electric motor bearings.

@jesseppers 2 месяца назад

So nothing gets greased?

@benlacroix5717 4 года назад

Hey man I put this starter in my 09 and realized it had a ball bearing already in it when I went to start it and it had a high pitched noise. I took it out and put it back in and now I’m just getting a click and it won’t even turn over. Any ideas on what could be wrong?

@rednecktech82 4 года назад

I had issues with intermittent start wouldn't fire 1st round but would fire on 2nd go sometimes would fire right up other times would click click click, all of that was just due to needing to take sandpaper to the battery cables and I also hit the terminals now she fires up like new. over time a layer of funk get's on the cables and it doesn't get a strong connection.

@benlacroix5717 4 года назад

I bought a brand new battery all cables are clean, it’s something to do with the clutch itself, I’m wondering if I got a dud? The round bearing in the middle wasn’t able to move very easily and felt stiff, did you add the old ball bearing to the new clutch? Or did you realize that the little ball was already in the bottom of the clutch in the yellow grease?

@benlacroix5717 4 года назад

I’m also wondering if maybe my whole starting assembly isn’t strong enough to support the all balls clutch?

@rednecktech82 4 года назад

@@benlacroix5717 could be dud, i reused mine with no issues.

@chrissoroberts3532 3 года назад

If your just getting the dreaded click click and no starter engagement you got a bad solenoid most likely...get a solenoid rebuild kit around $20 or better still the manual solenoid with the starter button on it.. look it up, good luck with it mate..

@baronvonchickenpants6564 9 месяцев назад

That poor little thing having to wang that great big lump over

@ShakirAuto067 3 месяца назад

Nice bro

@ivanvazquez5612 4 года назад

good mornig, me usted The # 7/8 tool usted centre The cntac centre instaletion una copa #7/8 use The intlation contac

@ShakirAuto067 3 месяца назад

Nice bro

@bobphillips1027 3 года назад

Where did you find it for 20 bucks?

@rednecktech82 3 года назад

Honestly I don't remember now think the last time I looked them up it was $40 at most.

@bobphillips1027 3 года назад

@@rednecktech82 I was mostly concerned about quality for 20 or 40 bucks vs 80 to 100 bucks I guess you get what you pay for. 😉

@rednecktech82 3 года назад

It was $20 or $40 for the components to rebuild not for a whole new starter. I have 20,000 more miles on the bike since I did this and it's still going strong.

@ShakirAuto067 3 месяца назад

Nice bro