Hat Embroidery Tutorial - Start To Finish

Подписаться 132 тыс.

Просмотров 14 тыс.

50% 1

in this video i walk you thru my whole embroidery process. How to load your artwork into the machine, how to set up your machine for stitching on a hat, how to hoop your hat, how to do 3D puff embroidery, how to clean your hat and get ready for retail. I also show all the supplies i use from thread, foam, blank hats and needles.
Ricoma Embroidery Machines
ricoma.com/US/referral/BigBra...
Supplies I show and talked about:
3mm Craft Foam
SuperB Poly 40 Thread
80/12 Titanium Needles
Otto Cap 6 Panel Structured Snapbacks
Support the channel and learn more about starting a clothing brand from home. Early access to videos, Rewatch Live Streams and Content made just for Patreon! Check out / bigbrandoh
Check out my E Books and ALL Big Brandoh Shirts and Hats at BigBrandoh.com
Follow me on Instagram @BigBrandohTV
Use my affiliate links below if you are looking to buy supplies or equipment. No extra cost to you and it helps out the channel.
Ricoma Embroidery Machines
ricoma.com/US/referral/BigBra...
The Heat Press that I use
heatpressnation.com/bigbrandoh
Ricoma Heat Press
Use Code BRANDOH10 for 10% OFF
shop.ricoma.com/?referral=Big...
Stahls Heat Press
shrsl.com/3i0k1
The Hat Heat Press that I use
shrsl.com/2gw8d
Heat Presses for all budgets
shrsl.com/2f0wd
Cameo Vinyl Cutter
shrsl.com/29zpz
EconoTransfer HTV
Econo.BigBrandoh.com
BFlex HTV
BFlex.BigBrandoh.com
ThermoFlex HTV
ThermoFlex.BigBrandoh.com
Siser Easyweed HTV
shrsl.com/1z0qf
Supacolor Transfers
Supacolor.BigBrandoh.com
Transfer Express Transfers
TE.BigBrandoh.com
Shipping Supplies and Heat Press Supplies
Poly Mailers, Scales, Laser Thermometers, Safety Rulers, T Shirt Folders, Clear Poly Bags, Cutting Mats etc.
www.amazon.com/shop/bigbrandoh
Sawgrass SG500 - Sublimation Printer
Sawgrass.bigbrandoh.com
Heat Press Base Cover
shrsl.com/1ud1q
Blank T Shirts and Tumblers
Blanks.BigBrandoh.com
T Shirt Mock Ups and Design Templates
sockitos.com/collections/down...
Custom Fonts
www.tkqlhce.com/click-1008454...
TRUSTED HEAT PRESS SITES For ALL of your Equipment and Supplies needs:
Heat Press Nation
HPN.BigBrandoh.com
Heat Transfer Warehouse
HTW.BigBrandoh.com
If You Need a Graphic Designer. Look up these guys on Instagram:
@aka_jerry_m @Dizmajiz @Rawtoons @BrentTab

Хобби

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@screenprintermike Год назад

Knowledge is power and now we all have more!

@ShannonBonner-zr4wg Месяц назад

Thank you excellent video, one of the best embroidery videos that I’ve seen, I like the fact that you show everything from start to finish and share your products

@marshallmndlovu5069 8 месяцев назад

I am inspired greatly, thank you Big Brandoh 👌👍👊

@ZsoCreative1NJ Год назад

Always on time Brandoh! I’ve been struggling with hats but I’m determined to get better before the end of summer. Thanks for a great tutorial 🙏🏾💜

@darylvoorhees2629 4 месяца назад

Excellent video. You really did show us everything. It was more than I expected . Thanks for the information.

@jonathanr7520 11 месяцев назад

The goat always giving game

@nicolegutierrez5821 7 месяцев назад

Thank you for this video you made it look like a breeze my ricoma embriodery machine has been sitting there for like 3 months and you made me feel more confident to try again.

@versatile3169 3 месяца назад

Thank you. Just found out about puff. Cool

@ritchiec6317 4 месяца назад

AWESOME!!!!!

@mschivuzprintz Год назад

Been waiting for another tutorial like this from you Big Brandoh💪🏾🔥💪🏾🔥💪🏾🔥FYI I have the em-1010

@BigBrandoh Год назад

yessir! im thinkin bout pickin up a em1010 myself. dope light weight machine.

@Vicidious1 3 месяца назад

Thank you!

@danielpapp4080 5 месяцев назад

Cool..thanks for the info video

@mendezgraphics7010 Год назад

Thanks again for the lesson! I appreciate you bro

@BigBrandoh Год назад

yoooo jerry. i appreciate you brotha!

@rightfullyoursclothing1040 Год назад

i cant even front, young chris murdered his verse , dam 🔥🔥🔥🔥🔥🔥🔥

@calydriver89 3 месяца назад

Great great video

@2ffashion38 Год назад

🔥 vid as always, but do you got any recommendations on blank mesh shorts brands?

@dominiquewoods4324 Месяц назад

Great video, what do you mean by its a structure hat so you don't use stabalizer?

@jairomartinez6768 8 месяцев назад

Hello sir. Are the needles ball point or sharp? Thanks for all the videos you are great.

@TheJarheadEntrepreneur Год назад

EXACTLY what I needed brother..I'm getting ready to FINALLY get my training knocked out for my MT-1501. Question I have is when you send it to a digitizer do you need to tell them it will be 3-D Puff? Appreciate the knowledge..Keep Crushing It!! Stay HUMBLE, Stay HUNGRY, Stay FOCUSED...~The Jarhead Entrepreneur

@BigBrandoh Год назад

yes. tell your digitizer what you plan on stitching on (hat, shirt, bag etc) also tell'em what kind of hat (5 panel, 6 panel, structured etc) and tell them you want 3D Puff embroidery.

@TheJarheadEntrepreneur Год назад

@@BigBrandoh Appreciate it Brother!!

@fishing0102 11 месяцев назад

What kind of stabilizer do you use to embroider?

@MrSamisue27 Месяц назад

Hello! Do find that the 80/12 needles work better than the 75/11 needles, and why? Is it worth my time to try and get these structured hats to run with 75/11 or am I just gonna keep wasting needles? Appreciate you!

@mryorkielover Год назад

Do you have the software to digitize your own designs? Or do you send it out? Thanks for the video

@BigBrandoh Год назад

yes i have chroma digitizing software but i havent mastered it yet. its easier for me to send my digitizing out

@Averyhess721 4 месяца назад

I've had massive problems with my hat embroidery recently. I've been using Decky hats style 6020 with 90\14 needles. I've broken 5 needles on 2 hats in the exact same part of the design as it crosses the seam. Any advice? Also really wondering how common are needle breaks especially on structured hats?

@emielfuller4851 Год назад

Could you share with us the most reliable heat transfer vinyl you currently use and the cut settings for it with the cameo?

@BigBrandoh Год назад

check the econo link in the description. i cut all htv on my cameo using the "heat transfer smooth" preset

@jorgevalle4163 8 месяцев назад

I have the em 1010. When I stitch a hat it hits the bill. How can I prevent the bill from hitting the machine? When the bill hits it. It move the hat and the stitching moves.

@sirlayo 10 месяцев назад

Looking to buy 2 ricoma machines as a new investment plan. I would like to know where to start after buying 2 machines.

@Iandave-ce7ku 16 дней назад

Hello I'm a beginner zero background with embroidery.Whats the easiest machine should I start.Thanks

@BigBrandoh 16 дней назад

i was a beginner with zero experience also. this machine wasnt hard to learn. the training that Ricoma gives you is easy and straight forward. the training is meant to get you up and running.

@MsRayMichele 6 месяцев назад

We have been trying to do hats but the needle always breaks at a certain point once the hoop turns a certain way! Have you had this type of issue before?

@crazy_creatures2129 Год назад

Awesome work. When did you start doing hats. Also is the start up costs for hats worth it even for limited runs?

@BigBrandoh Год назад

ive only been doing my own hats for like 2 years. i used to outsource it before. having a single head machine is the best for limited runs. alot of my money comes from doing small runs because most big shops with bigger machines have high minimums. so i can charge higher premium for doing less hats.,

@mryorkielover Год назад

Will those same needles and thread work for non stuctured hats? Thanks for answering questions.

@BigBrandoh Год назад

yes.

@mryorkielover Год назад

@@BigBrandoh Thanks brother for taking the time and teaching us all. I have my Ricoma 20 needle I am learning to use with the Chromaluxe software

@NerkNC 7 месяцев назад

Brando have u had a lot of trouble with this machine I’m looking to get one soon

@jonalyncolon612 Месяц назад

what is your parameter for cap?

@christopherdiaz2003 3 месяца назад

Whats the process on actually making the file? Is there a certin software you use?

@BigBrandoh 3 месяца назад

yea you need a digitizing software. you can use chroma lux (thats the one i got with my Ricoma) or you can just outsource the digitizing. just google "digitizing services" a bunch of sites will pop up for you to use

@robjones4316 Год назад

Sup .. from upstate NY !!!

@BigBrandoh Год назад

NY checkin in! whats happnin. thanks for watchin

@robjones4316 Год назад

@@BigBrandoh luv the show frfr….. I have a Melco Bravo 16 needle… lot of y’all got the racoma ….

@muratAlx 6 месяцев назад

👍🏼thank u brotha , are you hiring ? :) sf local ?

@4REALLLC252 Год назад

How would someone go about ordering them from you if they want custom hats for their business?

@BigBrandoh Год назад

thanks for reaching out but im not taking in any new clients at the moment. i got a full plate. i do recommend going with a local embroidery shop to you. so you can check proof samples in person. so that way you know whats going on

@4REALLLC252 Год назад

@@BigBrandoh oh okay. Thank you

@maleko321 Год назад

Would you mind sharing your digitizer?

@BigBrandoh Год назад

i google all my digitizers. google search "digitizing services" and every company on the first page i use. all competitively priced. depends on design, complexity and needs. so all designs are different. for this simple one i got quotes from the first 2 on google.

@maleko321 Год назад

@@BigBrandoh you are the man! Thank you so much for everything! I have been following you for sometime now and you have helped me so much begin the journey I am on! Mad love for ya brotha!

@tonetone7693 Год назад

How much does that Ricoma embroidery machine cost?

@mryorkielover Год назад

Around $15-$17 Grand

@tonetone7693 Год назад

@@mryorkielover That’s a pretty penny. Appreciate it though.

@mryorkielover Год назад

@@tonetone7693 True but it takes money to make money

@BigBrandoh Год назад

about $15k. depends if you finance or buy it cash. also depends on what you qualify for if you finance. i will tell you this, i got my machine i think 2 years ago in june/july and the amount of work that came in once i got it, i was able to pay the machine off before the year was over. less than 6 months. i have a pricing break down on my channel to help understand better. but if you have never out sourced embroidery work, i recommend start there. just to make sure you have clients who are interested in this service before you buy a machine.

@tonetone7693 Год назад

@@mryorkielover I feel that. Can’t disagree with you on that one.

@ianpolley4128 2 месяца назад

I need some hats made brother can you hook me up😭

@SeanLewisMedia Год назад

Hey man! I want to get some hats made for my Channel/ Side Business. Are you taking orders? I like the Yupoong Classic, and Just want some simple text "Sean Lewis Media"... Sean Lewis(TopLine) Media(bottom line). If your not taking orders what should I expect as a price point per hat from a shop? Thanks in advance man, great video explaining everything!