Heavy Duty Recovery Of A Rolled Over Dump Trailer 

Wow one hour drive you don't have a 9 to 5 it's 9 until the job is complete great job gentlemen God bless and stay safe

Perfect.Thank you.Stay safe all you there far away.

Great job, those end dumps are bad about rolling over. Have a great weekend and be careful.

Great job with the recovery fellas 🙂👍 Stay safe

Thank you for this report. Please stay safe and let God protect you all.

Just a great job done by the A team love your videos thanks

You two are great 👍 love to watch you guys working together! God Bless and stay safe!👍🙏🇺🇸👍🙏🇺🇸👍🙏🇺🇸

Good job guys . Them switches usually run off air. I noticed the tanks were empty when he plugged them in I would assume that's why it wouldn't lower

That sat down some smooth, a job well done.

You and Mr Wilbur communicate on everything you need to do first and communication is the key to avoid accidents from happening, and God Bless you and your family and friends and be careful and safe and may the force be with you

doing everything the old fashion way yes it takes a little more time but you got the job done great job Mr Hal and Mr Wilbert and no click bate here ... nice to see the 25 ton in action looking foward to the next video hey stay safe and god bless you and everyone that works with you cheers from Rhode Island

I love watching you and Mr Wilbert work. Fantastic job and stay safe.

probably the easyest driveshaft removal you have done all week 😉 iv had that issue before where only way i could get a cyl collapsed was to pop the hose, i was thinking the rod was bent but it came down way to easy after taking the hose off.

Great job as always. Thanks for sharing.

Another example of professional team work.

Another great rescue by the two pros at Sumter Towing. Perfect the way you guys got that thing to just slow motion come over. Thanks for sharing and you guys stay safe.

Great job guys. That tractor sure did take a beating.

Look like you & Mr. Wilbert had more of a job there than you thought. One thing about it is when they are on their side it makes it easy to take out the driveshaft! Good teamwork as always & stay safe out there & hope you all have a happy thanksgiving!

Hey Hal & Mr. Wilbert !!! Hey ,,what goes as NO Rain & Mud to play in ???? Guess that dirt was enough to get your ""DIRT BATHS "" HAHA Great job as usual & Have a good ""TURKEY DAY "" !!! ""KEEP IT SAFE ""!!

You had both hands full on this one. Don't know why hydraulics want dump all the way sometimes. It happens to us too. Slow and easy works every time. Big pat on the back to you and Mr. Wilbert. Great job. Take care and God Bless.

I liked the moon in the video before the sun went down. Nice job righting the tractor and trailer. Two things I noticed that may have made the job a little easier. When removing the drive shaft having a cordless impact wrench would have been faster and not knocking your knuckles with a ratchet. When you were trying to totally lower the bin you might have tried to run a line using a snatch block from under the trailer to pull it down. I might have saved you some time. Seeing that this video was posted you and Mr. Wilbert made it home safe and sound. Nice teamwork.

Another perfect job.... Have a Safe an Happy Thanksgiving..

I know that this is an older presentation but just now getting time to watch. You two are poetry in motion!! I had an employee that was a good friend that worked this way with me. Cancer consumed him 10 years ago but when I watch you guys work to gather it brings back great memories for me Stay safe!!!!

Why is it you use a shackle to connect loop to hook instead of just loop in hook? I've noticed that as common practice just don't know why. Good videos.

Wow! That was a smooth set down. Great recovery. I seen the boss man sitting watching from his pick-up, he had to be happy with that recovery.

Great work, Mr Hal. That looked like it went pretty well perfect. Well done !

Slow is smooth, smooth is fast. Another great rescue, nicely done. Thanks for sharing, stay safe!

Excellent recovery, I enjoy watching you and Mr Wilbert working together.

Love watching Mr Hal and Mr Wilbert...True professionals! Analyze situation and set the plan in action.

You guy's do a great job! Now that I am retired and worked wreckers for 20 years I love the way you all work from start to finish. Keep up the good work and stay safe!

You guys sure work hard, thanks for video.

Beautiful landing. Well orchestrated.

Great work both. Thanks for sharing.

That poor guy had a bad day. Great recovery!

, awesome job Mr Hal and Mr Wilburt always remember to stay safe

Like a butterfly with sore feet. Happy Thanksgiving to both of you and your kin.

Mr. Hal and Mr Wilbur, smooth as silk good job 👍.

I've seen a few videos of you wrecker drivers up-righting tipped over heavy bulk trucks and know it takes you hours, but a few years ago, one of those big round bottomed ones carrying a full load of ballast rubble down a bank on the other side of the road opposite my home and unloading to the right-hand side to level the bank to build a carpark. It tipped over just like the one in this video. I went into my house and came back out ten minutes later and they had up-righted it and were reverse tipping the load. They only had construction JCBs on site and certainly no rotators, so how on earth they corrected the truck in only ten minutes, I will never know. Thank you for showing us your work.

Nice recovery gentlemen. That trailer gave you guy's a fit but you finally got it. Was the cylinder bent? Was that at another Concrete Plant ? Stay safe guy's.

You guys get to a job you know what you got to do when you get her done no playing around no second guessing you know what exactly what you're doing good stuff be safe out there. 👍👍😀🇨🇦

Great job, lovely slow roll over

Nice work! I love watching your videos. Always learning ways of getting the jobs done. 👏👏👏

How long in time it took to complete the job?Man that is a lot of work.Stay safe

I pulled frameless and (thank the Lord) I never had one lay down, however I did have some close calls. Taikuu for the video, on to the next.

Great job my all with safe in mine 👍👍👍👍👍👍🙏🙏

What a team .

Hal, Viewers just missed seeing the "famous" Lake Marion Not Quite Actual Size striped bass billboard as you cross the lake and hit the high point on the bridge. It's right up there with the South of the Border signage all along 95. Nice easy touchdown. Gary

Another great video

Excellent job as always fellas enjoyed the video

Nice job. I hope you and family and coworkers have a great Thanksgiving.

Oh I see there is boards in between the frame and box, loll nice , thanks BigAl California

Great job as usual, God Bless and stay safe

Smooth, Y’all did it again. This never gets old. Was the ram bent? Is that why it wouldn’t come down? Thanks for sharing

Great job!

Nice job. Enjoyed

Too much work. Job well done guys.

This was a tricky one to get the bed down all the way!

Good job

That was a awesome job of rigging and pulling to roll the truck and trailer over that easy. That was a pretty lake you crossed going to the job.

Mr. Hal you and Mr. Wilbur had awesome love watching y'all work together the younger guys should take notes, thanks for sharing as always God y'all at Sumter Wrecker stay safe out there 💯

NICE VIDEO AND EDITING

Great job wow. Is the frightshaker fld new? Very sharp looking rig..

Mr Wilbert is a great employee

Here’s the million dollar question how do you flip a dump trailer and truck on level ground🥸🥸🥸🥸🥸🥸

Mr. Wilbert was you guys at Santee cement if you was my uncle Bill Patterson use to be plant manager there

ive seen tons of frameless go over for various reasons, hard to turn over a frame trailer on leve ground tho

didnt you do one of these not long ago?

Hal ,how this happened?

Man I dont like them trailers , Well Done

Didn't that driver know he was hauling an end dump, not a side dump?

great job..

Another one back on it's wheels 😎

Hope not injury

Was too much load?

I know some of them trailers have a backflow valve or plunger in them

That must have been some sticky stuff to roll that truck on level ground...

How long has Mr W been with you?

✅👍👍👍

I thought that jack had a load lock on it so in case it blowed a hose the bed wouldn’t slam down with it loaded

Mr Wilbert is a great employee

Mr Wilbert is a great employee