Holset H1C H1E turbo upgrade options

Подписаться 35 тыс.

Просмотров 30 тыс.

50% 1

H1c H1E upgrade rebuild kit : turbolabofamerica.com/holset-h...
H1E H1C WH1C WH1E rebuild kit : 421b62.myshopify.com/products...
62mm H1C H1E housing, wheel, plate, and rebuild kit upgrade : 421b62.myshopify.com/products...
67mm WH1C turbine housing upgrade with Wastegate : 421b62.myshopify.com/products...
64mm WH1C turbine housing upgrade with Wastegate : 421b62.myshopify.com/products...
H1C hx35 60mm by 70mm T3 .82 turbine housing 3 inch v band exit : 421b62.myshopify.com/products...
67mm Hx40 t3 .82 housing 3 inch exit : 421b62.myshopify.com/products...
64mm hx40 t3 .82 housing 3 inch exit : 421b62.myshopify.com/products...
64mm by 76mm hx40 10 blade turbine : 421b62.myshopify.com/products...
67mm by 76mm hx40 10 blade turbine : 421b62.myshopify.com/products...
www.turbolabofamerica.com
HX40 4015c 60 x 86 x 90 Billet Compressor Wheel Buy Here:
turbolabofamerica.com/holset-h...
HX40 4016c 60 x 86 x 90 (6mm tip height) Billet Compressor Wheel
ebay.to/1P3qTZF
HX40 62.35 x 86 x 90 Billet Compressor Wheel
ebay.to/2gu9q86
HX40 67 x 89 x 95 Billet Compressor Wheel
ebay.to/1MbnqIA
HX40 63 x 99 x 103 Billet Compressor wheel (hx50 Compressor Wheel for HX40 turbo)
ebay.to/2hjPCB3
Turbine Wheel Options:
Hx35 H1C Factory 12 blade 60 x 70
ebay.to/1P3BdB1
HX40 H1E factory 10 Blade 64 x 76 (not for VGT model turbo)
ebay.to/24UCnu6
HX40 H1E 10 Blade 67 x 76 (not for VGT model turbo)
ebay.to/1RDzhRw

Авто/Мото

Опубликовано:

9 мар 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@nickrudy9048 8 лет назад

This dude is the American Turbo Yoda.

@mikehardin7086 2 года назад

Dang, you sure know your stuff. I am impressed.

@Supranforever 7 лет назад

What would be a good option for an H1C on a 1jzgte with a .82 ar rear housing?

@supraanon1914 6 лет назад

Hi mate I'm in the uk I'm trying to find a holset turbo for my is300 my goal is 300-400bhp what turbo would you suggest I can get hold of a hx55 16cm is that to big ? Cheers and great vids 👍

@jiemrvow 5 лет назад

I have an h1 c I bought at auction it is new, but has endplay. Could u advise

@cosanostra4286 4 года назад

Cuestion ? Sir the best turbo for a 1st gen cummins ? 1991 d350

@emilianogatti9199 5 лет назад

Hi, forgive me ignorance. They gave me a turbo holset of cummins. In the intake housing says 3532801, in the intake housing says 3523089 and in the core says 3519939. Could you help me know that turbo is hx ...? Thank you

@stevenmckinney1136 3 года назад

I have the 97 12 valve in my 2000 f350 I have fass fuel 100 hp inj. ham. cam 178/208 which is i.290 e.320. Truck weighs 15000 lbs what turbo set up you recommend I put a sx366 pulled 60lbs boost blew head gasket. Installing new head now let me know. I have all the other upgrades as well .I own McKinney Auto & Diesel Repair AKA MAD PERFORMANCE in Eastland T.X. might be able to work together on some other builds as well.

@ibuki56 7 лет назад

hey Austin I have a Holset H1C 3528894 54mm inducer and 62mm 12 blade turbine (21cm) I'd like a upgrade recommended by U for my 500 - 600whp goal in a 1jzgte. Let me know what options is available and if achieving my goal is possible with this turbo

@bunker1622 8 лет назад

This is amazing.

@joshuajuno897 7 лет назад

i have some questions give me an email when possible josh9juno@gmail

@ccv2love1 4 года назад

How much to do some of these

@talon_mike1721 6 лет назад

So for my 60mm hx40 to run the 64mm, i wuld hav to machine thrust plate nd comp housing right?

@turbolabamerica 6 лет назад

I can't make sense of your commenr

@PortChopsGarage 3 года назад

Can you build my h1c for me?

@WARD5KUSTOMZ 7 лет назад

will the plate from an hx35 fit on the h1c center housing?

@turbolabamerica 7 лет назад

+WARD5KUSTOMZ the hx35 doesn't have a backplate

@shoveitupyours13 8 лет назад

austin, i tried emailing yall about the stuff i need for the turbo, but it says that the email doesnt exist. is there another way i could contact yall? (sorry for comment bombing alot of your videos)

@turbolabamerica 8 лет назад

+nick ameiss you turbolabamerica@gmail.com if you want you can text me. I don't answer many call anymore there are too many people calling while I need to work, often I will reply to a text or email at the end of the day.

@servantofyahuwah2486 3 года назад

I have a question. I am putting a VE pump off a 90 model 12 valve onto a 98 model 24 valve engine to get rid of vp pump. Which turbo do you recommend. The 90 model for intercooler type without wastegate, or the 98 turbo off the 24valve with wastegate?

@rocklanddale8646 Год назад

WHY WOULD U DOWN GRADE FROM THE P PUMP TO A VE?

@rocklanddale8646 Год назад

H1C CAME WITH THE VE, I BELIEVE ITS GOOD TO 300+

@servantofyahuwah2486 Год назад

@@rocklanddale8646 the 98 model 24 valve had a computerized vp44 pump factory. It is a rotary pump with lines to injectors to fit a rotary pump. The ve pump is rotary, so I used the same lines. But the ve pump is not computerized. I don't like electronic injection pumps. Plus the ve pump is easier to adjust and turn up timing etc. The P pump I am sure would be more expensive plus I would have to get special injector lines also, again more expensive.

@rocklanddale8646 Год назад

@@servantofyahuwah2486 OKEY DOKEY I'VE ONLY RUN 1ST GENS THANKS FOR THE GRAY MATTER!

@chacelarsen50 7 лет назад

would you sell me the machined h1c backing plate and thrust bearing? I just bought a billet wheel for my H1c but it's for an hx35. I didn't realize the super back differences! thanks love the videos

@turbolabamerica 7 лет назад

+chacelarsen50 There are a few different variations of the h1c compressor wheel size, I don't think the tip height is the same as the hx35, I thought the h1c tipheight is taller but I'm not sure. There is a 56 x 83 and 50x 78 h1c compressor and 54 x 78 hx35 and 56 x 83 hx35 wheel

@chacelarsen50 7 лет назад

I measured my compressor wheel and it's 53.8×81.3 I ordered a mamba 11 blade wheel and it fits my compressor cover exactly like the stock wheel but it just sits too high because it has a taller superback. I was wondering if you would sell just the modified backing plate and hx thrust bearing? Thanks for the quick reply

@turbolabamerica 7 лет назад

You need the upgraded h1c thrust bearing, the hx35 thrust collar and a machined plate correct? If the exact dimension of the wheel is 81.3 I can machine the plate to 82.5 and the collar

@chacelarsen50 7 лет назад

+Turbo Lab America the billet wheel that I have has some clearance at the edge of the wheel. I don't think it needs to be machined. I just need the plate machined for the hx35 thrust collar

@chacelarsen50 7 лет назад

On the new wheel the tip height is 5.78mm The super back height is 5.01mm

@nfoejr 8 лет назад

Do u have a website or on eBay

@turbolabamerica 8 лет назад

+neil foe jr www.turbolabofamerica.com , what are you looking for? If you go to the op of my website in the navigation "buy turbo parts here" links to our eBay store.

@tomrohn8607 Год назад

How come you never answer your emails?

@cosanostra4286 4 года назад

Dude were is you'r clases

@connorjones536 7 лет назад

how much does it cost for me to send in my h1c

@connorjones536 7 лет назад

and convert it to an hx40 super

@turbolabamerica 7 лет назад

+connor jones 350-650 depending on what you want me to build.

@b.g.t_93garage43 6 лет назад

Turbo Lab America I'm building a 4.0 inline 6 jeep motor and am going to boost it, I have an h1c off my 1993 12v, is there any way you can build my h1c to be a good set-up for my build? I'm not looking to make 1000hp, but I want great throttle response,