No video :(

Honda Accord 2.4L Drive Belt (Serpentine) Replacement (I4) 2004 (2003-2007 Similar)

Подписаться 110 тыс.

Просмотров 340 тыс.

50% 1

In this video I show you how I replace the drive (serpentine) belt on a seventh generation Honda Accord 2.4L (I4) (2003-2007). Many Honda drive belt replacements are very similar to this.
The exact vehicle in this video is a 2004 Honda Accord EX 2.4L four cylinder sedan.
Be sure to subscribe for more tool and car repair videos!
/ bigdog50001
Buy Big Dog50001 T-Shirts, coffee mugs and other gear here!
bigdog50001aut...
/ bigdog50001
/ bigdog50001
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com... (As an Amazon Associate I earn from qualifying purchases).
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
Tools and Parts:
Honda Drive Belt 38920-RAA-A03: amzn.to/3xYgkX5
Bando Drive Belt 7PK1781 (Aftermarket Alternative): amzn.to/3tvOiiq
Schley Products Belt Tensioner Tool 10950: amzn.to/2KzOMRf
GearWrench Belt Tensioner Tool 3680 (alternative): amzn.to/2N8dhGX
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses.
Have something you would like to send to Big Dog50001?
Send it here:
Big Dog50001 Automotive Channel
P.O. Box 726
Cortaro, AZ 85652
2016 Epidemic Entertainment. All rights reserved.
Disclaimer:
Due to factors beyond the control of the Big Dog50001 Automotive Channel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Big Dog50001 Automotive Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
The Big Dog50001 Automotive Channel recommends safe practices when working with power tools, in on or around automobiles or other vehicles, automotive lifts, lifting tools, jack stands, electrical equipment, automotive modules and systems, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.
Due to factors beyond the control of the Big Dog50001 Automotive Channel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Big Dog50001 Automotive Channel.

Опубликовано:

15 июл 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 251

@BigDog50001 6 лет назад

*Parts and Tools* This channel earns a small commission using some of these links - at no additional cost to you. Honda Drive Belt 38920-RAA-A03: amzn.to/3xYgkX5 Bando Drive Belt 7PK1781 (Aftermarket Alternative): amzn.to/3tvOiiq Schley Products Belt Tensioner Tool 10950: amzn.to/2KzOMRf GearWrench Belt Tensioner Tool 3680 (alternative): amzn.to/2N8dhGX The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive

@robensderissant9011 4 года назад

Big Dog50001 Automotive l

@greenpea9412 5 лет назад

I would have never guessed in a million years that belt could be removed so easily. You sir are saving people a ton of money. I'd buy you a beer in a minute if I thought you lived near me. Another great video.......thank you.

@BigDog50001 5 лет назад

Thanks!

@ramonreyes7104 3 года назад

Dude that’s literally what I said after I saw this , I was like omg I can do this & a mechanic would probably charge a fortune smh😂😂

@globalprofits101 2 года назад

Can we honda people acknowledge the advice and "Napa know how" of big dog here! Always watch his videos to learn and grow with work on my 08 accord. Thanks for your time brother 🙏

@BigDog50001 2 года назад

I appreciate the comment, thank you!

@stevepoole6830 4 года назад

Awesome video. Just replaced my belt this morning. 15 minute job from start to finish. Thanks for all the tips - especially PATIENCE ! Really urge people to get that tensioner tool that you show in the video. It will save you some bruised knuckles. I bought mine for $30 from Princess Auto ( Canada ) or probably Harbour Freight in the U.S. I was experiencing a whine from the engine when warm. Thought it was tensioner pulley - so I replaced that item but sound persisted. Then I thought maybe a bad power steering pump bearing. But before spending money on a new pump - I opted to replace the serpentine belt even though it looked fine. Once I replaced the belt - I inspected the old belt and found that it was delaminating ever so slightly but in multiple places along the belt. Car runs quiet now - just like new.

@_JerryLopez_ 10 дней назад

Some heroes do not wear capes, only dirty greasy pants and shirts!! Thank you for this video!

@prolly2stoned420 7 месяцев назад

This dude is saving lives in this economy no joke 💯💪🏻 the hero we all needed forreal.

@BigDog50001 7 месяцев назад

Thanks for the comment 👍!

@rudytrujillo4197 Год назад

Just did my serpentine belt replacement, couldn't have done it without this video, thank you you are a life saver

@LA_Commander 2 года назад

Great video! A quick tip, always remove any watches or jewelry or rings off your hands and fingers whenever you perform any work on your car, particularly in the engine compartment. When I was in the military, they were very strict on enforcing that for safety.

@FordTransitvan 11 дней назад

Thanks for this, gave me confidence to have a go. I didn't think I could reach under the car to the crank pulley so took a 1m steel rod, bent the end over in a vice and covered said end with insulation tape to help move things around down there. Amazingly it worked, took about 10 mins.

@dottyjyoung Год назад

Thank you. You & others like you on here are saving us thousands of dollars that we can't afford to spend.

@Jez2008UK 3 месяца назад

I love the way you reiterate to take your time over and over. Thank you so much for your videos, I watched your alternator replacement video first, but will now go and check to see if the belt also needs changing. Thank you also for telling us the part numbers. You’re a star.

@BigDog50001 3 месяца назад

Thanks 👍!

@Jez2008UK 3 месяца назад

@@BigDog50001 Yep, the belt definitely needs changing :)

@BigDog50001 5 лет назад

Be sure to subscribe for more tool and car repair videos! ru-vid.com twitter.com/BigDog50001 instagram.com/bigdog50001/ Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive

@Slava-Motovilov-Racing 3 года назад

Thank you Big Dog! You make a great instructor. Your tone of voice and the pace is PERFECT :)

@BigDog50001 3 года назад

I appreciate the comment, thanks!

@paulgray387 8 месяцев назад

i really appreciate the step by step and unedited portions that are the most difficult for the casual car tech. thank you

@davidh7636 5 лет назад

Nice video. I would only add one important thing. Keep your old belt maybe with your spare tire! If you ever throw a belt while driving, you won't have to find one while on the road. It can come in very handy in that situation!

@BigDog50001 5 лет назад

You will need a tool to install it also, thanks for the input!

@handynoah8328 4 года назад

Great tip, I'll save my old one just in case. I've replaced my belt by watching this video. I took it off with the #14 wrench and a another wrench as an extension.

@HernanHH95 2 года назад

That’s pretty bad if it brakes while driving. You might not live to fix it. Good thing I was going slow in a small road while it broke

@formatique_arschloch Год назад

@@HernanHH95 What?

@dottyjyoung Год назад

@@HernanHH95 Yeah, that happened to me in my Odyssey. Catastrophic engine damage.

@cyclone411 5 лет назад

Thank you for SHOWING how to lever the tensioner to slack the belt and for identifying the part number of the tool!

@BigDog50001 5 лет назад

Thanks for the comment!

@lancebrauch7132 5 лет назад

Nice clear video without a bunch of yammering. Excellent. I did not see the indicator you reviewed in any other videos, very helpful. A+

@BigDog50001 5 лет назад

Thanks for the comment!

@coreydixon3868 2 года назад

Hey thank you for the clip! Just used it to help a lady in distress. Kudos to you on the pointers in this video. ✊🏽

@BigDog50001 2 года назад

👍

@inasirtube 5 лет назад

Echoing the comment below. I would have never expected that removing the belt could be that easy. Thank you sir!

@BigDog50001 5 лет назад

Thanks for the comment!

@woodaddy62 7 лет назад

Good instructional video. No need to pay the dealer >$150 to do this job.

@Ricardo-qv9jn 3 года назад

They might charge 700 for that

@talexis187 3 года назад

No dealership would charge from $100 for that

@erikam6536 3 года назад

@@talexis187 Not true I called a place and they tried to charge me $100 I laughed in their face cuz ain’t no way

@cathypeterson1411 3 года назад

This video was awesome!!! The button totally disintegrated after I parked it in my garage, so it has been stuck there for 6 months because I didn't know how to get it out of the garage since it was in park. I even called a local mechanic I have used in the past, he's pretty good, but he said he would have to get under the car to release the linkage so we could shift the car!!!!!😳😳😳 Since we were in the must of cold winter, that has not happened. Now since I have watched this video, I'm going to go get the parts I need and do it myself!! Ps, I'm a woman, but I know I can do this!! Thank you for great video!!!

@jonathandziedzic310 Год назад

Normally I skip through some parts but I saw your comment about not editing the video to get a good time estimate and I really like that, thank you

@juliacleveland 3 месяца назад

Thanks!! Just replaced my belt, this video was so helpful!

@BigDog50001 3 месяца назад

👍

@AllahElohim 2 года назад

Thank god for this man's clear instructions and visual guide! Never thought it could be this easy. Keep it goin mane!

@SkullkraneEntertainment 2 года назад

Excellent video! Bought a new Gates belt and serpentine belt removal tool from O'Reilly and got the job done in ten minutes. 👍

@michaelrosenow4239 5 лет назад

Watched this video, rented a EverTough 67061 from O’Reillys (ironically it did NOT contain the 14mm necessary for my 2004 Accord), and replaced it relatively easily with a Bando from AutoZone. Believe or not, my belt is original w 313,149 miles on it! Thank you fine sir for a wonderful tutorial! Saved me about $100...

@BigDog50001 5 лет назад

Thanks for the input and the comment!

@worldsfinestnegativemind9108 3 года назад

Great video. I have a 2007 civic with 153000 miles. The original belt is in excellent condition.

@BigDog50001 3 года назад

Thank you for the comment!

@johnwanehuang 3 года назад

Spent an hour and replaced the belt successfully! Thanks a lot!

@BigDog50001 3 года назад

👍

@Ske3849qw 11 месяцев назад

This man is priceless. Thank you.

@hikgerguy1234 4 года назад

Thanks very much for putting this video together. This will save me $155!!!

@BigDog50001 4 года назад

Glad it helped, thanks for the comment!

@mariecharles6406 Год назад

Thank you so much. I didn't realize it was as simple as it was till I cane across this video.

@BigDog50001 Год назад

👍

@schifoso Год назад

Thanks. Getting at the belt around the crank pulley was easy when accessed from the right front wheel well. I also had a really long screwdriver to reach down from the engine bay and give the belt a nudge if it needed it.

@Hamza-ml2zr Год назад

For some reason you remind me of a calm Bill Burr, who’s a mechanic. Mechanic Burr 😂

@chooseanameforme888 7 лет назад

Great instructional video. I really liked your patience explaining this. I'll try it on my p 03 Accord EX

@BigDog50001 7 лет назад

chooseanameforme888 Thanks!

@josetellez1803 2 года назад

I was planning on replacing the belt and tensioner but after watching the first couple minutes I realized that probably wasnt necessary! That probably saves me about $80!!!

@sonyyoung1036 Год назад

Great tip on the tensioner marker and how to interpret the position of the pointer. Thanks

@stevepoole6830 4 года назад

Awesome video. Followed your steps including buying a tensioner tool. Excellent advise. Would only add that in my case - after replacing belt - the marker arrow fell outside the tolerance marker as shown in your video. However after starting engine and running for a few minutes - the marker fell back into the tolerance marker range. Otherwise thanks for the tutorial.

@BigDog50001 4 года назад

It is self adjusting, sometimes it needs to adjust itself. Thanks for the comment!

@screamusor 3 года назад

Thank you! Very helpful! And as you say: patience, patience, patience...

@BigDog50001 3 года назад

👍

@JayeK47 2 года назад

Very helpful video. I was getting some bearing noise and it turned out to be the tensioner pulley itself so replaced both.

@BigDog50001 2 года назад

Thank you for the comment!

@diamondsandgems9637 3 года назад

Hard to comeby such tutorial videos. Great job

@BigDog50001 3 года назад

I appreciate the comment, thanks!

@ryderjolly5322 Год назад

My tension release would NOT do that. Still got it out but need to put it on now. That arrow is to the left. So need to replace auto tension and belt. Probably why not working? This is my first time working on cars. Trying to learn. Thanks so much!!

@RichadTheLionHeat 2 года назад

Great detail, informative, and extremely helpful. Yes your efforts were helpful. I need to change the serpentine belt on a 1999 Honda Accord LX. Thanks. 👍🏻😎🙏🏻✝️🇺🇸

@BigDog50001 2 года назад

I appreciate the comment, thank you!

@derrickjudon3912 2 года назад

Thanks bro I did it step-by-step an I completed the job

@elmerfrejoles98 Год назад

Wow, really about 7 mins to replace your Accord drive belt! We'll be replacing my 2017 Honda Mobilio tomorrow. I'm asking a friend with some tools to help me. We hope it would be just as painless as yours did.

@ronshansby4438 7 лет назад

You have done a great job on all of your videos. Thanks so much.

@BigDog50001 7 лет назад

Ron Shansby Thank you.

@chuckmaleman5216 4 года назад

Im about to replace the entire tensioner assembly on my 03 crv.gone through 4 belts or maybe 5 in the last year.also have an oil leak on the sane side.these things can be a nightmare to put on.but like you say patience,patience,patience.its not THAT hard.great vid by the way

@BigDog50001 4 года назад

👍

@maysatx9705 Год назад

Went through 3 aftermarket brands on that crv tensioner assembly. Sad to say none of them worked like oem. Each of them made the belt squel like a pig in a slaughter house. Oem was more than double the price but definitely worth the cost.

@Luiz-pv3ph Год назад

Thank you so much for the video and specially for the belt circuit drawing.

@jagfull 5 лет назад

You make it looks so easy , Thanks Big Dog

@BigDog50001 5 лет назад

Thanks!

@ericastier1646 9 месяцев назад

That's a problem as it much harder than he made it look with plenty of traps.

@fongyang2797 Год назад

Your video was very helpful.....thank you

@maysatx9705 Год назад

Had some issues with belts from the aftermarket brands. Gates seems to be the closest if not equal to oem in performance.

@RoosterMaximus03 Год назад

my belt has 243,000 miles, never changed it but I will today. I've always inspected it and bought a replacement about 5 years ago but just haven't had the need to replace it.

@sammosam1 7 лет назад

Thanks for the awesome video! I think that's the problem with my Honda - I'm going to grab a belt tomorrow and see if this fixes it. Your videos have given me the confidence to work on my car myself.

@BigDog50001 7 лет назад

Thank you for the comment!

@radiogoodguy6287 4 года назад

Great how to video. Quick & to the point. Thanks!👍

@BigDog50001 4 года назад

Thank you, I appreciate the comment!

@globalprofits101 2 года назад

Big dog is the Honda God

@BigDog50001 2 года назад

I don't know about that, but thanks for the comment!!

@James-fx2lh 6 лет назад

Another great Big Dog video - best stuff on the net - biggest dog on the porch

@BigDog50001 6 лет назад

lol, thanks!

@zeache4564 6 лет назад

Thanks for the video man 👍 I'll change mine this week!

@BigDog50001 6 лет назад

Thank you! In my alternator replacement video I showed some other tools that can be used for this job, I show them at around the 8 minute mark and then I talk about part numbers near the end. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lyKm6cn6QiI.html

@kowzter 3 месяца назад

My arrow is between the two bars exactly where yours was in the video, will it move to the right outside of the bars to let me know to replace belt ? Or should I also preventatively replace mine ? It is old but doesnt look too bad

@stevechurch2126 2 года назад

What does your Honda maintenance manual say about changing the tensioner pulley, does it recommend replacing along with the serpentine belt? Thanks for the video, I replaced my 2012 Accord belt after watching.

@BigDog50001 2 года назад

The idler pulley (the part that spins) should be replaced if it makes noise or feels gritty when spinning it by hand with belt off (sometimes it will make a loud obnoxious noise when car is running). Typically the entire Auto-Tensioner assembly (not just the pulley) is replaced if the service indicators that I pointed out are outside of the service limits, if the service indicators bounce back and forth too much when the car is running, if the tensioner does not move smoothly back and forth when moving it with a tool or if the service indicator changes position too much from engine off to engine on. The most tell-tale sign of the Auto-Tensioner assembly needing replacement is a chirping belt, especially at start up or revving engine. Thanks for the comment!

@stevechurch2126 2 года назад

@@BigDog50001 Excellent feedback, thank you, I am indeed hearing a chirp at start-up, lasts a fraction of a second, I will take a closer look this weekend (using your points) and likely order the tensioner assembly. Maybe you have a tensioner YT so I'll look for that also.

@jondotcom8706 Год назад

Did this with a ratchet and once the belt was on the wrench was trapped between the engine mount and the tensioner pulley. I had to remove the engine mount 😂 I guess the right tool really comes in handy for this job

@hikgerguy1234 4 года назад

Meant to also note that places like O'Reilly and Avance Auto Parts also rent the belt tensioner tool, so that will save a few bucks too.

@BigDog50001 4 года назад

👍

@MrUltranuman 11 месяцев назад

Another great video

@SaltySouthernOutdoors 3 месяца назад

Thanks for this video.

@marioh.4361 Год назад

great video and great lightin

@BrutalUniverse 3 года назад

Excellent instructor! Thank you sir.

@willglenn-bl9gm 11 месяцев назад

My belt won't tighten back on, is my tensioner shot? I tried a new belt and then went to put the old belt back on cause the new one was loose, I have it all on the way it should be and all lined up but won't tense back up

@torontoguy8043 3 месяца назад

One thing I want to add, when buying the belt, get the correct one for your car. If your car has or doesn’t have air conditioning, get the correct one.

@timothyporter1981 2 месяца назад

This video was awesome

@ericastier1646 9 месяцев назад

*Read* *my* *comment* if you are about to attempt this DIY. There are critical difficulties missing in this video. I thought i was well prepared after this video but it is missing key points. I'am a DIY and have done several successful repairs and maintenance in the past including full drum brakes but this seemingly easy belt replacement has several traps. It took me 3 hours split over two days to complete it, so i'm letting you know what pitfalls there are : 1) the loan a tool program from auto shops misses the 14 mm socket for Honda (they have 13,15,16,18 mm). Don't use the included crowfoot 14mm, it'll slip and fall off. Also make sure to use a low profile 14 mm socket or you won't be able to clear out the tool when you finish the install. Even if the tool fits when removing the old belt the new belt might set the belt tensioner slightly more against the motor mount and you won't be able to remove the wrench. So make sure your 14 mm socket is low profile enough. 2) The loan tool standard socket push-in attachment sucks (no retainer), use electrical tape to make sure it won't fall down in the car. I lost one 14 mm socket and have not found it. I had to go buy another at home depot which by chance was a few millimeter lower profile. When i finished the job it barely cleared the space against the motor mount and my original 14 mm socket from my toolbox probably wouldn't have. 3) Big helpful trick: I used a super long braker bar handle that i slid down just next to the crank pulley to prevent the new belt to get off it. That is a big help. maybe you can use a narrow broom handle as well. 4) When pushing the belt over the highest pulley with your hand don't think it seems it won't fit. You have to push one ridge at a time then adjust the belt around the other pulley underneath to get a little more slack. Then push again and repeat to get another ridge in. Don't expect it will work by only pushing in one go. Although it did for this guy, it did not for my car. That's about it. If i had known all this before hand it probably would have taken me 20 min. Always be doubful of these DIY where they complete the job in 10 min, it can be luck or they just got over the difficulty without showing them.

@Gingergirl38 11 месяцев назад

What's the size because I got gates brand 15/16×70-3/4" oc 24mm×1796mm and it was too small 2004 Honda Accord dx 2.4 4cylinder

@saginaw60 2 года назад

thank you, when i get drunk tonight, i will have a drink for you!

@BigDog50001 2 года назад

👍

@quietkey2003 2 года назад

It's some time later...but thank you for the jprecise instruction. Peace

@BigDog50001 2 года назад

Thanks for the comment 👍!

@drerocs 2 года назад

I replaced my belt but it is banjo tight. The tensioner indicator however is within the proper range. Should I change the belt again? I got it from O’Reilys

@dannymartinez771 Год назад

Thank you sir for your help.👍

@ScreenPrintR 6 лет назад

Thanks, didn't see you untighten or tighten. Is that what the Tensioning tool does, turn it one way to loosen, and release to tighten?

@BigDog50001 6 лет назад

The tool simple pivots the tensioner to loosen the belt.

@gregorylambert8975 Год назад

Thank you for posting this video bro. Was a little frustrating for me but I got it done with your help. It definitely would help to have that specialty tool from Honda to loosen up that tensioner. I tried it with two smaller wrenches connecting them together and that was a real pain in the ass. So I went to harbor freight and bought a longer 14 mm and even that didn't really have quite the length that would enjoy the leverage to make this much simpler. Your comments about the tensioner and the arrows also are very valuable. I noticed that my tensioner arrow is slightly to the left so does that mean that that tensioner is going bad? Because I noticed that I have a slightly rough idle now. Any comment back would be appreciated on that

@Nycorexti Год назад

Yes, you should go for a new tensioner

@floating7431 2 года назад

The arrow is to the left of the bars indicated at 1:47 even after replacing the tensioner and belt. Should I be worried?

@SouthwestGaming 3 года назад

Thanks brutha , helped alot

@BigDog50001 3 года назад

No problem 👍!

@AndonEXE Год назад

great video!

@pcx4766 Год назад

The Achilles heel is the compressor. In the 7th generation Honda, it is worth getting a V-belt. BANDO 7PK1390 or Continental Contitech Length [mm]: 1400 Replacing it takes a few minutes for a layman after deflecting the automatic tensioner (such a small circle) with a 13 or 14 wrench if I remember.

@bulls-89 3 года назад

Dziękuję thank you .. I don't know English very well but everything can be seen and understood.

@BigDog50001 3 года назад

👍

@aricherweck7758 4 года назад

what is wrong if the arrow is not quite lined up with the squared boxes?? Mine isnt :/, Ive changed the serpentine before too but it came off while i was driving and i cant get it back on

@yesten2932 3 года назад

Completed in 15 min with a short wrench and a long tube

@metal420. 3 года назад

Thanks, excellent Video.

@BigDog50001 3 года назад

👍

@MOUSEBOWEN 2 года назад

Súper awesome video thank you so much for sharing

@Jitsuman 2 года назад

Thanks man

@BigDog50001 2 года назад

No problem 👍!

@SashaNem 6 месяцев назад

thanks

@BigDog50001 6 месяцев назад

👍

@JOHNBON2010 3 года назад

I have honda accord 2006 lx special edition with 210000 miles, is this the timing belt or something else. I haven't change anything

@chriscjc8868 Год назад

I've done this before . Not difficult. Just make sure you have the correct belt and route it correctly .

@frankmontez6853 10 месяцев назад

What kind of timing belt or chain does a 09-14 Accord with 2.4 L have? Very difficult or expensive to replace?

@glennhansel9411 8 месяцев назад

timing chain...

@angelgab_6068 Год назад

thank you man

@HernanHH95 2 года назад

Bought the belt from autozone Duralast Belt 723K7 Hard to put, feels like an inch smaller. Still fighting

@Benicorn Год назад

Still having this same issue. Did you get it to work?

@HernanHH95 2 года назад

Got mine from autozone but the tensioner don’t give me much or the belt is a bit small

@joshuaskaplan 5 месяцев назад

Can you use another tool for the tensioner?

@kriszellers9718 Год назад

Thanks for making this

@alexderus7480 5 лет назад

Good info about the Honda / Bando part numbers

@BigDog50001 5 лет назад

Glad it helped, thanks for the comment!

@kathyt.7468 7 лет назад

My son will be changing my belt...it looks easy enough?! Not sure if he has the tool you're using? GREAT video;)

@BigDog50001 7 лет назад

Kathy T. Thank you.

@videoric 3 года назад

You, sir, are an excellent teacher! Thank you!! The only thing in watching your great videos I'm still confused about is what do you mean when you say you have a 14mm and a 17mm "hooked together"?

@BigDog50001 3 года назад

Two wrenches hooked together to make one long wrench (for additional leverage). Thanks for the comment!