Тёмный
No video :(

Honda B Series Limited Slip Differential Install (Extremely Satisfying) 

Boosted John
Подписаться 77 тыс.
Просмотров 32 тыс.
50% 1

Honda B Series Limited Slip Differential Install (Extremely Satisfying)
Hello and welcome to another extremely satisfying Honda B Series video. Today we are going to be installing a Wavetrac limited slip differential into my B Series Honda Transmission. A limited slip differential is a huge upgrade of the the stock open differential. The limited slip diff will cause both tires to receive power in a wheel spin scenario. The stock diff would only cause one to spin and it would be the tire with the least grip. The limited slip diff upgrade will cause a huge bump in straight line acceleration and cornering. This is not an end all guide to differential installs, but it is an extremely detailed guide to installing a Wavetrack limited slip differential into a Honda/Acura LS B Series manual transmission. This process will be very similar to every other B Series limited slip diff install, but may not be exactly the same so please double check with the manufacturer of your differential before following my guide step by step. Not only that, but the sounds and visuals that you are about to experience are extremely satisfying. With that said, let me know how you enjoyed the video in the comment section down below.
P. C. E. A.
Instagram ► / boosted_john
Merch ► dashboard.tees...
Patreon ► / boostedjohn

Опубликовано:

 

28 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 80   
@TH3MOB1
@TH3MOB1 3 года назад
Gus is a baby that drools
@gustavoramirez2556
@gustavoramirez2556 3 года назад
Only over you
@boosted_john
@boosted_john 3 года назад
To provide a bit of backstory on this comment, Gus is a coworker of mine. He was yelling at one of the other express technicians today and then as he finished yelling a big glob of drool came slangin out of his mouth. #babygus
@jamesthompson9313
@jamesthompson9313 3 года назад
My favorite part of this video was seeing you drop things. IM NOT ALONE
@adamcroteau8711
@adamcroteau8711 3 года назад
FINALLY! My built D16 has an open diff and I really regret not getting an LSD while the trans was out of it
@boosted_john
@boosted_john 3 года назад
I’ll be making a video on if it was worth it once I get the car running.
@savethecivic96
@savethecivic96 3 года назад
@@boosted_john I forget John what happened to it?
@jimhiscott2918
@jimhiscott2918 Год назад
Never use old diff bearings. Next time you remove the speedo ring set it upside-down on a table, apply heat to it and it will fall off on its own. And last put your diff in a dry ice cooler. The NEW bearing will fall on. Heat is the number one enemy of a bearing
@boosted_john
@boosted_john Год назад
Hey Jim! Hope you're doing well man. I hope your build is coming along nicely. I donated to your gofundme a few months back. Always a pleasure to see you in my comment section.
@The_Redkween
@The_Redkween 3 года назад
I’ve always watched HSG for B-series tranny rebuilds and he makes it look easy but I can tell from watching this that it really isn’t. 😂 good job, Jon!
@schmikels_garage
@schmikels_garage 3 года назад
You need to check the bearing/diff preload when you install a new diff like that. It can mess up the bearings and or diff possibly or the case is the transmission of you don’t check it and shim it properly
@JohnDoe-cs5uo
@JohnDoe-cs5uo Год назад
How does one do that? I'm curious to know when installing mine.
@schmikels_garage
@schmikels_garage Год назад
@@JohnDoe-cs5uo put the diff in put the case on n put a few bolts in and have axle seal out of the top case you put on and put the feeler gauge between the bearing n the shim in the case I think spec is .001-.010 but not 100% should look that up
@toddkovi2849
@toddkovi2849 Год назад
0.004 max per the Honda shop manual @@schmikels_garage
@AW11SC
@AW11SC Год назад
I recently bought a transmission with a Cusco diff swapped in, clearance not checked. 0.05mm to tight and its caused issues with the diff bearings.
@fryreartechnology7611
@fryreartechnology7611 3 года назад
When that LS V-tec kicks in yo! Love the S2k and this build awesome to see you getting back on it. Don't know how you work and RU-vid respect
@tonyo5732
@tonyo5732 3 года назад
Pro tip! Loosen the access plug while the trans is on the car. Saves me a lot of headache when I take apart Honda trans 😂
@kgatentumadre1312
@kgatentumadre1312 Год назад
Impact 🤷🏻‍♂️
@BrokenMarnie
@BrokenMarnie 3 года назад
I love the b series stuff I’m really considering getting my own
@boosted_john
@boosted_john 3 года назад
It’s been a super fun build! What do you have now?
@BrokenMarnie
@BrokenMarnie 3 года назад
@@boosted_john a stock 08 civic 😭it’s my first car it’s not great but it gets me places
@JorgeTorres-is7bv
@JorgeTorres-is7bv 3 года назад
Pretty nerve-racking that you keep dropping shit lmao. Love it
@the_mysterious_gamer1657
@the_mysterious_gamer1657 3 года назад
Dude this series is really making me want to build an EK or EG, I’m just saving for the day I can import an AE86. Maybe my midlife crisis will be building a honda 😭😭
@Ekxanny
@Ekxanny Год назад
“extremely satisfying” drops just about everything 🤣🤣 That’s me Asf
@myPursesuitOfHappiness
@myPursesuitOfHappiness 3 года назад
It’s so shiny and new! Nice! LY 😘
@boosted_john
@boosted_john 3 года назад
Haha thanks mom. Love you too ☺️
@jokrkillah
@jokrkillah 3 года назад
Looking good got a b18a1 done a bit of stuff to it so far headgasket and oil pump the assembly is always the most satisfying. I can relate tho I'm always dropping shit 😅
@kearneyalmond1492
@kearneyalmond1492 3 года назад
This makes me happy! Proud of you bae! Turbo civic-I’m looking forward to seeing you😍
@boosted_john
@boosted_john 3 года назад
😘
@mohhus98
@mohhus98 3 года назад
cool I wish if have the guts to work on my transmission like this
@boosted_john
@boosted_john 3 года назад
I was pretty nervous tbh. I hope I did everything correctly.
@noahkicks6874
@noahkicks6874 2 года назад
This looks very intimidating
@aaden4888
@aaden4888 3 года назад
Best BELIEVE when I H-Swap my Integra I will definitely put in an LSD while it’s out. Much love John you definitely got the beans!
@boosted_john
@boosted_john 3 года назад
BEAN MODE ENGAGED
@mikeeyyss2150
@mikeeyyss2150 3 года назад
I had pulled the trans out from a d17 to change a bearing or 2 and I messed up the placement of neutral so when I put it back in the car all the gears had resistance and I wasn't able to even shift into 5th or reverse (I had some guy do it for me). Helpful video tho, will be looking at this for reference 👍
@mikeeyyss2150
@mikeeyyss2150 3 года назад
I actually pulled the trans out like 4 times but only opened it one time. I been sold that car and now I have a 99 EX Coupe 5 speed.
@danieleremchuk7332
@danieleremchuk7332 3 года назад
Keep killing it my dude!!
@johnstevens7049
@johnstevens7049 Год назад
That WAS satisfying
@hussainmaster5002
@hussainmaster5002 3 года назад
Hell ya! Boosted's back!
@SELF19881
@SELF19881 2 года назад
Great video! You made it look simple 🤣🤣
@allstat1290
@allstat1290 3 года назад
Let’s go boys!
@ryansmith2814
@ryansmith2814 6 месяцев назад
Im wondering how this diff held up without shimming it
@da6xsi06
@da6xsi06 Год назад
I never had a good experience with wavetrac lsd's. They either won't let the passenger axle go or it slips out on its own.
@drewstermalloy
@drewstermalloy 3 года назад
Watching you work on that table stresses me out lol.
@boosted_john
@boosted_john 3 года назад
Lol working on that table stresses me out 😂
@13geeky
@13geeky 3 года назад
So excited, give it the beeansss
@JohnSmith-qn5ib
@JohnSmith-qn5ib 3 месяца назад
How much should a job like this cost? Just in labor
@Spudstrodamus
@Spudstrodamus 3 года назад
Now time for a big 2 wheel peel
@TH3MOB1
@TH3MOB1 3 года назад
Great Video Man! Turbo Noll
@ericcarrington9643
@ericcarrington9643 2 года назад
I’ve always froze the bearings and heated the surface bearing sits on did it that way
@bighomieJ5X
@bighomieJ5X 3 года назад
Night and day difference, way less torque steer 💯
@ericcarrington9643
@ericcarrington9643 2 года назад
Did you use the torch on the bearing to get to slide on the diff?
@ericcarrington9643
@ericcarrington9643 2 года назад
Sure did roasted the trans before he could drive it
@saleplains
@saleplains Год назад
im curious how sketchy that is. ive never torched a bearing out of fear of cooking the grease
@shaday1759
@shaday1759 3 года назад
Love the content keep it up Jon like 👍🏼 :)
@hseriesonlymonctonnb1181
@hseriesonlymonctonnb1181 3 года назад
What play did you shim the diff to
@prestonking5692
@prestonking5692 2 года назад
Honda calls for 4 to 7 Thousandths thrust.
@bobbyrios2k223
@bobbyrios2k223 3 года назад
Sweet install! Didnt change any synchros? Or not that beat up?
@boosted_john
@boosted_john 3 года назад
I just said frick it and reused the old ones 😂
@bobbyrios2k223
@bobbyrios2k223 3 года назад
@@boosted_john send it! 🤣
@landoski
@landoski 3 года назад
Didnt check difference clearance/play?
@boosted_john
@boosted_john 3 года назад
I did off camera and it seems to be perfect.
@m.m.aautos6608
@m.m.aautos6608 2 года назад
Yeahhhhhhh rightttttt
@erica8497
@erica8497 3 года назад
Don’t be afraid to use air tools !!
@bigtravis2004
@bigtravis2004 3 года назад
Did you have to shim the new diff?
@boosted_john
@boosted_john 3 года назад
I didn’t find anything in the instructions that talked about shimming it and it seemed to fit with zero play so I think it was good without a shim.
@SokoAircraft
@SokoAircraft 5 месяцев назад
Dropping things like an amateur but made up for it by holding the ratchet by the neck on low torque bolts.
@johndutton4860
@johndutton4860 2 года назад
why wavetrac over mfactory ? and also how come you did not check diff end play in the video ?
@boosted_john
@boosted_john 2 года назад
Did it off camera. Fixed it later…
@prestonking5692
@prestonking5692 2 года назад
Hey man how is the wavetrack holding up? I got one for my h22 stroker build
@boosted_john
@boosted_john 2 года назад
So far so good! I only have about 300 miles on it tho.
@soulbodymind3282
@soulbodymind3282 7 месяцев назад
it's been two years how's it holding up now@@boosted_john
@efraindiaz1867
@efraindiaz1867 2 года назад
What is that tool called lmk asap
@mr.clicknail
@mr.clicknail Год назад
Dropping tools or searching for them... 😅
@maikenpham1631
@maikenpham1631 3 года назад
No loc tite in the ring gear bolts ?
@boosted_john
@boosted_john 3 года назад
I did off camera
@maikenpham1631
@maikenpham1631 3 года назад
@@boosted_john was just curious cause my old boss put my ring gear on my new diff and didn’t loc tite them and the bolts backed out a couple months later and destroyed everything
@JakeDevYT
@JakeDevYT 3 года назад
transmissions scare me lol
@justar6865
@justar6865 3 года назад
Noice
Далее
Honda B18 Engine Tear Down | Extremely Satisfying
20:27
ЛОВИМ НОВЫХ МОНСТРОВ В LETHAL COMPANY
2:42:22
Кого из блогеров узнали?
00:10
Просмотров 499 тыс.
3RD GEAR GRIND FIX!  B-SERIES TRANS  HOW TO.  HSG EP. 5-19
27:45
Honda/Acura B series 5speed IN DEPTH REBUILD! PART 1
25:26