Honda Civic Rear Strut Replacement 2000 (1996-2000 Similar)

Подписаться 108 тыс.

Просмотров 66 тыс.

50% 1

Honda Civic Rear Strut Replacement 2000. In this video I show how I remove and replace the rear struts on a Honda Civic. The exact vehicle in this video is a 2000 Honda Civic LX Sedan. 1996-2000 Civics should be similar.
Enjoy!
Be sure to subscribe for more tool and car repair videos!
/ bigdog50001
/ bigdog50001
/ bigdog50001
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog500...
Tools and Parts:
KYB Strut Plus Assembly SR4042: amzn.to/2Z0UU9n
Milwaukee 2754 Impact: amzn.to/2KH7vsY
GearWrench Ratchets: amzn.to/2KtmTdH
GearWrench Sockets: amzn.to/2GW6MTB
Snap-On 3/8" Tech Angle Torque Wrench: bit.ly/2H3cJzo
Daytona Jack (Cheaper at HF with Coupon): amzn.to/2LuEqTn
Jack Stands (Cheaper at HF with Coupon): amzn.to/304DIoV
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses or automotive questions.
Have something you would like to send to Big Dog50001?
Send it here:
Big Dog50001 Automotive Channel
P.O. Box 726
Cortaro, AZ 85652
2019 Epidemic Entertainment. All rights reserved.
Disclaimer:
Due to factors beyond the control of the Big Dog50001 Automotive Channel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Big Dog50001 Automotive Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
The Big Dog50001 Automotive Channel recommends safe practices when working with power tools, in on or around automobiles or other vehicles, automotive lifts, lifting tools, jack stands, electrical equipment, automotive modules and systems, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of the Big Dog50001 Automotive Channel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Big Dog50001 Automotive Channel.

Авто/Мото

Опубликовано:

18 июл 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 112

@BigDog50001 4 года назад

*Tools and Parts* This channel earns a small commission using some of these links - at no additional cost to you. KYB Strut Plus Assembly SR4042: amzn.to/2Z0UU9n Milwaukee 2754 Impact: amzn.to/2KH7vsY GearWrench Ratchets: amzn.to/2KtmTdH GearWrench Sockets: amzn.to/2GW6MTB Snap-On 3/8" Tech Angle Torque Wrench: bit.ly/2H3cJzo Daytona Jack (Cheaper at HF with Coupon): amzn.to/2LuEqTn Jack Stands (Cheaper at HF with Coupon): amzn.to/304DIoV The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive

@andywinslow5480 3 года назад

Hey Dave. Late to the party but I wanted to comment anyway. Great video. You cover all the important details that DIY'ers like me need to know. I'm working 2 jobs to dig out of a financial nightmare and you are saving me hundreds of dollars in parts and labor costs that allow me to keep my car on the road to get to work. I really appreciate it. Thanks.

@BigDog50001 3 года назад

Glad it was helpful, thank you for the comment!

@lionden4 3 года назад

Very honest comment. Like it

@pattonsullivan3498 2 года назад

@@BigDog50001 puu

@Pete217 3 года назад

Great channel big dog, now I’m definitely replacing my suspension

@TheDisgruntledMechanic 5 лет назад

Great job and instructions as usual Dave! Keep it up. It is always "that guy!"

@BigDog50001 5 лет назад

The Disgruntled Mechanic Yep, lol! Thanks for the comment Mike!

@DavidCoffill 5 лет назад

Another great teaching video Big Dog! Your attention to detail and safety are awesome!

@BigDog50001 5 лет назад

David Coffill Thanks!

@stillearly1 4 года назад

Great job explaining it step by step, big dog.

@BigDog50001 4 года назад

I appreciate the comment, thanks!

@yunlam3623 4 года назад

Nice job, very clear instructions and great advice. keep up the good work.

@BigDog50001 4 года назад

Thanks! 👍

@merrickhurst4150 3 года назад

Better late than never here. Your video helped me out big time, thanks for making it.

@BigDog50001 3 года назад

Glad to hear it!

@joedominick7517 5 лет назад

Excellent instructional video Big Dog!

@BigDog50001 5 лет назад

Joe Dominick Thanks!

@lionden4 3 года назад

Enjoyed watching your video! Very informative!

@BigDog50001 3 года назад

Thanks 👍!

@leswire5859 Год назад

Thanks! Love the start by hand tip. As a MR (machinist) in the Navy, and in my career trying to teach people to STOP, do not force those fasteners. It is much easer to fix if you do not force it!

@patrickjones9381 5 лет назад

Love your vids big dog keep them coming

@BigDog50001 5 лет назад

Patrick Jones Thank you!

@ignaciovecchio6079 Год назад

Great video, I did it all with no complications. Greetings from Argentina!

@BigDog50001 Год назад

Thanks 👍!

@keepingasrealasican1029 4 года назад

Another awesome vid. It is super helpful. Thanks for sharing your know how

@BigDog50001 4 года назад

Glad it helped, thanks for the comment!

@corymiller5093 3 года назад

Thank you sir great channel very informative and helpful info. Very detailed.

@BigDog50001 3 года назад

Thank you, I appreciate the comment!

@jamesyates4180 3 года назад

That was a GREAT ,you did a excellent job on your video

@BigDog50001 3 года назад

Thank you, I appreciate the comment!

@user-dk9vl6of2y 5 месяцев назад

best instruction video on this planet, thank you very much

@BigDog50001 5 месяцев назад

I appreciate the comment, thanks!

@sammydow494 Год назад

Well done ,better than garage.

@BigDog50001 4 года назад

Be sure to subscribe for more tool and car repair videos! ru-vid.com twitter.com/BigDog50001 instagram.com/bigdog50001/

@WINER380 2 года назад

This was great gonna finally go change them things pretty soon

@BigDog50001 2 года назад

I appreciate the comment, thank you!

@wyattoneable 5 лет назад

I purchased a Daytona jack myself and love it. If I owned a Honda I'd watch every video! Oh, I do that anyway. I can always learn something here.

@BigDog50001 5 лет назад

They are good jacks. Thanks for the comment Wyatt!

@bobbymolis6401 Год назад

Excellent video

@BigDog50001 Год назад

Thanks 👍!

@hectorgalvan8674 5 лет назад

Bravo I dont know what it is but I watch your videos all the way

@BigDog50001 5 лет назад

Thanks, I appreciate the comment!

@goneviral6037 8 месяцев назад

Perfection!!!

@AntonioClaudioMichael 5 лет назад

Struts are always a blast

@BigDog50001 5 лет назад

I like doing struts for some reason lol.

@noobwow2009 2 года назад

WOW! GREAT VID!! I AM PLANNING TO RESTORE MY FAMILY OLD 98 CIVIC. TRYING TO FIX THE BREAKLINE AND REPLACE ALL THE BUSHING/STRUT/BREAK :D

@BigDog50001 2 года назад

👍

@scottbowden9686 3 года назад

Great video, I used this instruction to do this same job on my 1999 Honda Civic, very clear and easy to follow, much appreciated.

@BigDog50001 3 года назад

Glad it helped, thanks for the comment!

@tamacaterran 4 года назад

Thanks for this video my 01 coupe civic is very similar

@BigDog50001 4 года назад

👍

@Old-Tires Год назад

I did this to my 99 Civic Coupe back in January the KYB struts are performing well so far no issues my trailing arm bushings are totally fucked when I saw them when changing the struts. For me the easy part was removing the old struts no bolts got seized car is a southern car but I sprayed the bolts on the LCA everyday for a week prior to changing the struts with KW Knocker loose from NAPA hard to say if that did anything or if the bolts would have come out without spraying them but reassembly was the hard part for me I had to keep jacking up the lower control arm to get it lined up I would get the bolt partially through but the other side where the bolt had to go through was blocked I would get one side lined up but the other side the bolt had to go through got blocked when I got the blocked side to line up the other side would then be blocked and the bolt can't be tightened all the way I got the bolt partially started and then I had to either jack up the LCA or push down on the drum to get the bolt to go through the other side hard to remember what exactly I had to do since I did this a little over two months ago but the type of pry bar used in the video is a big help for this job I got the pack of pry bars with a pointed edge from harbor freight it helped me a lot with this.

@johnaclark1 5 лет назад

Lang makes that thread chasing set. I have one. Great kit!

@BigDog50001 5 лет назад

johnaclark1 I remembered the name while filming my tool video and forgot on this video, I’m getting old....

@johnaclark1 5 лет назад

@@BigDog50001 Boy, I hear that! I can't remember something told to me 10 minutes ago. Plus, I know these videos look easy but I've attempted making videos in the past and it's definitely not easy. Thanks for what you do.

@josecuevaz5298 4 года назад

Nice video

@BigDog50001 4 года назад

Thanks!

@arthurfricchione8119 5 лет назад

Dave another good video. Thanks for taking the time to record it. I noticed the KYB struts looked to have more coils incorporated in the spring assembly. guess because they are aftermarket or it makes no difference? How do you like KYB components? Liked the video and now time for coffee out of my new Mikes Disgrunteled Mechanics coffee mug. Should make it quite enjoyable. Just a side note your shop looks great. Clean and organized. My way of working. Have a great day 👍👍👍

@BigDog50001 5 лет назад

Arthur Fricchione Good to see you are supporting Mike! I like KYB struts. Thanks for the comment!

@arthurfricchione8119 5 лет назад

@@BigDog50001 Let me know if you get any cups, Dave

@AntonioClaudioMichael 5 лет назад

Great video Brother

@BigDog50001 5 лет назад

Thanks!

@ArslanJess 4 года назад

thank you

@BigDog50001 4 года назад

Thank you for the comment!

@3nduser Год назад

Hello, I followed your video three years ago and everything worked great. Was wondering if you could point me in reliable ADJUSTABLE struts for this 2000 Honda Civic LX please. I would like to raise my car height a little higher as it is difficult to get out since it is so low. Thank you. Will be watching this again when I replace my struts again. thanks.

@NextLevelAutoDiagnostics 4 года назад

Another excellent tutorial! I think this might be the first time you didn't go genuine oem. (I thought you said the hooks shouldn't be used as jack points.) The old struts weren't leaking nor were the springs broken.....what made you change them?

@BigDog50001 4 года назад

I like KYB struts and use them a lot. The rear hook that I used to jack up the car is a designated lift point by Honda on this model. The old struts did not handle well, and really showed how badly they were performing after replacing the front. Thanks for the comment!

@Cris.tianmartinez Год назад

Nice video! Did you notice a change in ride height ?

@michealcampbell8827 3 года назад

Can we tighten them by hand if we don’t have a torque wrench?

@jazzbox35 4 года назад

The shock replacements I ordered don't have the nut welded on to the base. This is the first major suspension job I'm trying. Is it safely equivalent to procure and install your own nut in lieu of the welded-on nut? I see now some replacements for sale have the nut, some don't. Thanks. Enjoyed the video. Mike

@BigDog50001 4 года назад

I would have to see it to see if it is possible but in general I am not a fan of having to improvise on suspension parts like that.

@jericlee1509 3 года назад

hows d performance?

@goneviral6037 8 месяцев назад

I wanted to see how long you struggle getting that bolt back in it’s a nightmare

@wodzimierzknapik6741 2 года назад

I have MG ZS from 2005. Your movie’s are very gelpfull - ZS have simmilar suspension.

@wdhewson 5 лет назад

Never wore out rear struts on any of my Hondas, and some had nearly 500 000 km on rough Canadian roads. How many miles on that green Civic?

@BigDog50001 5 лет назад

WD Hewson 240,000 miles on that Civic.

@lionden4 3 года назад

Mine as 2020. My Honda Civic si 1996 has 426,000kms. Just replaced front and rear shocks and struts, spark plugs, ignition wires, air filter. And now in highway use it produced 15.36 kms per litres! Now I am driving almost 25 years car with the feel of new car.. nice video!! Thanks for sharing.

@lilnapkin5610 3 года назад

How long did this take

@mbs5328 5 лет назад

Can you recommend a good set of wheel chocks?

@BigDog50001 5 лет назад

MBS I’ve never had an issue with the ones from Harbor Freight.

@jonl3301 9 месяцев назад

Anyone know where i can get a rear struch to arm bushing?

@georgebonney90 5 лет назад

👍

@BigDog50001 5 лет назад

george bonney90 Thanks!

@AntonioClaudioMichael 5 лет назад

Take some paper towel and put it over the bolt head and put the socket on it will help keep the bolt on the socket in tight spaces

@BigDog50001 5 лет назад

Paper towel is a great suggestion, pieces of regular paper or work gloves also work! Thanks for the input!

@petedoley1521 3 года назад

what is the part called you took the bolts off before the coils? at 6:15

@bearschmidt3180 2 года назад

Impact driver is the drill and a pair or side bent needle nose pliers.

@mustafakaiper4014 4 года назад

Hii sir excuse me can İ ask a question What is the make and model of torque wrench??? Please Can you writing İ'd requesting

@BigDog50001 4 года назад

It is a Snap-On 3/8" Tech Angle Torque Wrench. I have an older model, they have newer designs now.

@nanerpussz 2 года назад

SAVE YOUR TIME! Just go in from the trunk , cant see any point in taking any part of the rear seats apart, unless youre working in a super tight garage like this.

@SuperRaider85 3 года назад

Ware did you get the torque meter device or whats the brand name

@BigDog50001 3 года назад

Snap-On.

@SuperRaider85 3 года назад

@@BigDog50001 do you know ware i could buy one

@cody4128 4 года назад

Does anyone know if the car needs an alignment after these are replaced?

@BigDog50001 4 года назад

Not an absolute requirement but it is always a good idea to get one.

@frediavalos6437 10 месяцев назад

I have exactly same car and I had question see if u could help me out I have a Honda civic ex 97 VTEC 1.6 and when I am driving the car run good but when I turn it off then turn back on and drive it lose power then it gain power again I changed the distributor still does same thing spark plugs r new and the wires hopefully you can give me some device what you think it could be I don't trust this mechanic they say a lot stuff that it not hopefully you get my msg thank u

@jdmchickkustomz9417 4 года назад

I cannot get that front brake assembly bolt out. I have fought with it for two days with all kinds of penetrating oil. I don't want to have to cut it off. I'm even using breaker bars to push the breaks down to try to get the strut assembly out. What up p i a... Thanks Honda my Mitsubishi wasn't this hard😩

@BigDog50001 4 года назад

This is one of those areas where a good impact wrench can help out (not always though!). Impact, heat, patience. Good luck!

@jdmchickkustomz9417 4 года назад

@@BigDog50001 I got the lower control arm bolts out Thanks

@shobney 4 года назад

I broke two bolts off, now I have no idea wtf to do.

@themechanic6117 5 лет назад

great work. I want a snappy torque wrench but they cost so much! lol. who would give this video a thumbs down? sometimes i upload a video , one second after the upload i refresh the page and i already have a thumbs down ! lol. just proves that the video wasnt watched, just a hater who sees the upload and automatically gives a thumbs down.

@BigDog50001 5 лет назад

The Snap On ones sure do cost a lot, but I don’t want to go back to using normal click type torque wrenches now. It seems like we all have a few haters that just like to click the thumbs down on every video no matter what it is. I appreciate the comment Jonathan, thanks!

@jdmchickkustomz9417 4 года назад

How the hell could you get that bolt out I wish mine would come out 😩

@darinp5612 3 года назад

if you can't get the bottom outer bolts out, take the upper control arm loose and pull the strut out that way

@bearschmidt3180 2 года назад

@@darinp5612 exactly ! Sometimes that is much easier. And it's only 2 bolt's

@Redbull661 4 года назад

"ehh 36.1" lol

@BigDog50001 4 года назад

lol

@chadbrewer1733 3 года назад

Why put the tire & rim under the car that costs hundreds of dollars instead of just leaving the jack or an extra jack stand that only costs 20$?

@BigDog50001 3 года назад

Because the the tire(s) needs to be placed somewhere out of my way so I am not tripping on it, and a second jack stand would not be supporting the vehicle so it could be knocked over or get in the way and most likely not be able to be placed under the car in an area where it could catch it without causing damage. If the vehicle falls off the jack stand, I am worth much more than a rim or a cheap jack stand.

@bearschmidt3180 2 года назад

@@BigDog50001 Amen Big dog 🙏

@robwells5753 3 года назад

I have a knockoff Milwaukie ratchet from Amazon its been great well worth the purchase. China is getting better all the time at replicating our overpriced tools