Тёмный

Honda CRV 2013 to 2017 Front PADS and ROTORS REPLACED 

RB The Mechanic
Подписаться 112 тыс.
Просмотров 32 тыс.
50% 1

Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic
#hondacrvbrakes #hondacrv #crv #hondacrvfrontbrakesandrotors #frontbrakepads #frontbrakes #hondacrvfrontrotors #2014hondafrontbrakes

Авто/Мото

Опубликовано:

 

16 янв 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 61   
@gregnewlin1009
@gregnewlin1009 2 года назад
Thank you for posting this very helpful video! Your suggestion about how to remove the rotor retaining screw saved me a lot of aggravation, much appreciated!
@admiralking
@admiralking 2 года назад
Great video! Thank you for your efforts. Be sure to specify front or all wheel drive when you order front brake pads. There is a difference in length.
@RBTheMechanic
@RBTheMechanic 2 года назад
Sure will!!
@ashrafsiddiquee3190
@ashrafsiddiquee3190 Год назад
Bro you are a honest and clear macanic. I can tell for sure from something I heard you said. Thanks for the video. I'm going to do the same brake job on my 16 crv in another 5000 miles. Thank you
@RBTheMechanic
@RBTheMechanic Год назад
Yup it’s good to keep it honest and real I even say bad stuff when it needed to be but it’s honest bad lol anyways let me know how ur job goes
@ashrafsiddiquee3190
@ashrafsiddiquee3190 Год назад
@@RBTheMechanic sure I will. Thanks
@newfie8065
@newfie8065 Месяц назад
Thx keep the videos coming i appreciate u
@RBTheMechanic
@RBTheMechanic Месяц назад
Yup!
@CJ-214
@CJ-214 10 месяцев назад
Great video, peace and love from Denver, Co.
@RBTheMechanic
@RBTheMechanic 10 месяцев назад
Thank u
@HMcdon
@HMcdon 2 года назад
Great illustration.
@RBTheMechanic
@RBTheMechanic 2 года назад
Thank u
@imloggedin
@imloggedin 8 месяцев назад
If you are watching this, make sure you watch a video on the rear pad replacement too if you plan on doing those. They are not the same and require much more effort to deal with the electronic e-brake.
@RBTheMechanic
@RBTheMechanic 8 месяцев назад
Yup I have videos on electric rear brake system
@mr.archippus1561
@mr.archippus1561 Год назад
Nice video
@RBTheMechanic
@RBTheMechanic Год назад
Thank u
@condor5635
@condor5635 2 года назад
Great video - you say 14 mm and 19 mm. At the end of the video it seems to be 8 mm (caliper pins) and 14 mm ( bracket). Seems anti seize on that Phillips screw would be a good idea. Thanks for posting
@RBTheMechanic
@RBTheMechanic 2 года назад
Yeah thank u it’s just look small on camera
@joeo8396
@joeo8396 8 месяцев назад
Great video! Wacked the rotor trick worked like a charm. The screw came right out. Perfect. Thanks!
@RBTheMechanic
@RBTheMechanic 8 месяцев назад
Nice good job
@BlondieSL
@BlondieSL Год назад
Near the beginning, when you mention the impact tool, I have to say, before watching all these kinds of videos, I had not heard of that tool. So the other day, I went and bought on that was on sale for $15 and I had a chance to try it on that very screw. It was amazing. Just 2-3 slaps with the hammer and the screw came out nicely. I wish I had known of this tool years ago. LOL I have a question. Is it true that the rotors on the front ARE vented, but the rotors on the rear are NOT vented? Specifically, on a 2016 CRV SE AWD ???
@RBTheMechanic
@RBTheMechanic Год назад
No rears are not
@BlondieSL
@BlondieSL Год назад
@@RBTheMechanic Well, I finally bit the bullet and did the brake job, back and front. New pads and rotors. It took me a while because I used the die grinder to clean up a lot of rust here and there. But what a difference now. Thank you so much for your extremely helpful video. Cheers
@RBTheMechanic
@RBTheMechanic Год назад
@@BlondieSL nice good job doing it urself!!!
@ashrafsiddiquee3190
@ashrafsiddiquee3190 Год назад
1 question. On a AWD vehicle do u have to replace all the brakes in same time ??? Dose it matters bcz of AWD ????
@RBTheMechanic
@RBTheMechanic Год назад
Yes they r diffrent I think this was awd
@liggerstuxin1
@liggerstuxin1 5 месяцев назад
My rotors are shiny and new (under a year old), but one of them got prematurely, worn down due to the brake pad not being replaced in time. Do I still need to replace both rotors? Obviously I need to replace both brake pads regardless, but I’m wondering if both routers are new if I need to replace both of them. Because one of the rotors has grooves in it where the brake shoe thing was brought down to metal and put grooves all in the rotor.
@RBTheMechanic
@RBTheMechanic 5 месяцев назад
I would replace both them to be equal
@liggerstuxin1
@liggerstuxin1 5 месяцев назад
@@RBTheMechanic damn. Thank you 🙏
@RBTheMechanic
@RBTheMechanic 5 месяцев назад
@@liggerstuxin1 welcome!!
@joshfrancis9069
@joshfrancis9069 3 года назад
Dont know how to message you need a little help with my grounds in a 93 accord where it goes from bat to block or chasis or starter confused please help
@RBTheMechanic
@RBTheMechanic 3 года назад
I can check it tomorrow and I can let u know just remind me around 11am
@StreetMoneyTv
@StreetMoneyTv Год назад
What program is that at the end of the video that show you what bolts and socket you need
@RBTheMechanic
@RBTheMechanic Год назад
That’s shop data
@StreetMoneyTv
@StreetMoneyTv Год назад
@@RBTheMechanic where can I get that? work on brakes and would love to use that
@RBTheMechanic
@RBTheMechanic Год назад
@@StreetMoneyTv u mean parts?
@StreetMoneyTv
@StreetMoneyTv Год назад
@@RBTheMechanic no at the end of your video it showed what size socket was needed to take of calipers bolt and pin
@RBTheMechanic
@RBTheMechanic Год назад
@@StreetMoneyTv that’s shop data $400 month subscription
@maurics78
@maurics78 2 года назад
Great video. Please I need torque specs for honda crv EXL 2013
@RBTheMechanic
@RBTheMechanic 2 года назад
80 and 25
@maurics78
@maurics78 2 года назад
@@RBTheMechanic Thank you so much. These specs can used for AWD...?
@RBTheMechanic
@RBTheMechanic 2 года назад
@@maurics78 yup
@maurics78
@maurics78 2 года назад
I appreciate it. I have a question. I bought an acdelco rotor, but apparently it is a little bigger than the original rotor, can this cause a problem or should I look for a rotor that is the same as the original? Which one do you recommend Crv 2013 Exl?
@RBTheMechanic
@RBTheMechanic 2 года назад
@@maurics78 I’m not expert on parts but those rotors wount even fit u can go with electric coated rotors that’s what I mostly use also the acdelco is good
@TheApatheticGuy
@TheApatheticGuy Год назад
Video is good, but I don't know about WD-40 on the piston boot. That stuff isn't good with rubber.
@RBTheMechanic
@RBTheMechanic Год назад
Small application wouldn’t effect anything
@mor7464
@mor7464 Год назад
Does the 19mm need to be foot lb torque as well. Please give me a reply back. I’ll be doing my brakes soon. I would like your opinion on it.
@RBTheMechanic
@RBTheMechanic Год назад
If u have torque wrench and specs do so
@RBTheMechanic
@RBTheMechanic Год назад
@@Main-street no rear are diffrent
@RBTheMechanic
@RBTheMechanic Год назад
@@Main-street what year make model is ur car
@boomsuga
@boomsuga 3 месяца назад
This is shoe maker way of doing it
@RBTheMechanic
@RBTheMechanic 3 месяца назад
Ok
@renerodriguez8983
@renerodriguez8983 Год назад
I drilled out the screw...pain in the ass
@RBTheMechanic
@RBTheMechanic Год назад
Ohh yeah it is
@dtoad5576
@dtoad5576 26 дней назад
dont breath that brake dust. maybe put a fan. Cancer!
@RBTheMechanic
@RBTheMechanic 26 дней назад
Yes I use mask and also goggles a must before was recless
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,3 млн
Replace Front Brakes & Rotors 2007-2016 Honda CR-V
24:42
Guess The Drawing! ✍️✨🧐 #shortsart
00:14
Просмотров 1,5 млн
Лайфхак с колой не рабочий
00:16
Просмотров 275 тыс.
The Right Way to Remove Honda Brake Rotor Screws
8:33
Просмотров 791 тыс.
2016 Honda CR-V Front Brake Pad Replacement 2012-2016
10:15
DIY Honda CR-V Front Brake Repair 2017 -2021
28:00
Просмотров 67 тыс.
The Only Brake Pad You Should Buy
10:07
Просмотров 798 тыс.
How To Perform a Professional Brake Job (Pads & Rotors)
38:48
Попрошайка на BMW😅 #shorts
0:42
Просмотров 1,4 млн
Кто-то ездил в жару на УАЗе?😂
0:55