Honda motorcycle conversion part 2

Подписаться 961

Просмотров 2,8 тыс.

50% 1

In this video I’ll be building the battery compartment, installing the front fender. Fitting up the chain/jackshaft, replacing the brake handles, new kick stand and so much more. All the parts used in this video are down below. Let me know if I’ve missed anything.👍
PGN UCFL204-12 Pillow Block... www.amazon.com/dp/B07QLGNY8T?...
PGN UCFL202-10 Pillow Block... www.amazon.com/dp/B07W7LHWTM?...
Tynulox 1Pcs 304 Stainless Steel... www.amazon.com/dp/B0BCJYQ1DK?...
3/4" x 14" Jackshaft with 3/16"... www.amazon.com/dp/B076H9PSRM?...
AZSSMUK 5/8" Shaft Collar... www.amazon.com/dp/B07GSW5288?...
RHKING #40 Roller Chain Sprocket... www.amazon.com/dp/B0BV18QFZ9?...
The ROP Shop (2) New 3/16" Keyway... www.amazon.com/dp/B07D6W76B2?...
Jeremywell #40 Roller Chain Idler... www.amazon.com/dp/B01FV5QXG8?...
PGN #40 Roller Chain - 10 Feet +... www.amazon.com/dp/B07NPSZCK6?...
AIEX 8pcs #40 Chain Master Links,... www.amazon.com/dp/B09V7NKPQR?...
www.ebay.com/itm/166417133251...
HPS AST-175 6061 T6 Seamless... www.amazon.com/dp/B014GXM33S?...
YUANJS Motorcycle Side... www.amazon.com/dp/B09S3B6D1D?...

Авто/Мото

Опубликовано:

20 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@Iowa599 2 месяца назад

Lol! Put the spring on the kickstand first. Second, attach the spring to the frame. Third, finally, put the pivot bolt in while holding the kickstand in the most 'up' position! The spring is in the least stretched position when up against the stops. Works great on all my Hondas

@doglegjake6788 Месяц назад

Excellent work

@Goomer 2 месяца назад

Nice work, resembles a Fat Cat.

@Tylerjschmidt 2 месяца назад

It basically is one.

@Goomer 2 месяца назад

@@Tylerjschmidt I have an 1986.

@Tylerjschmidt 2 месяца назад

@@Goomer hard year to find

@stevenpleasant5834 Месяц назад

Hi, can you tell me how far apart the shafts are from center to center on the jackshaft and the center of the bottom shaft to the center of the rear axle bolt and can you show and tell how you did the rear sprocket plate for the wheel and you did not show how you did the sprocket from the motor to the first sprocket on the top shaft the chain from the motor and the chain is 420 what did you use for that sprocket? I think this bike looks good.

@BenjaminSerge 2 месяца назад

How come you connected the brakes backwards? The front brake should be on the right and rear on the left or am I missing something?

@Tylerjschmidt 2 месяца назад

Honestly it doesn’t matter. That’s how I always had them.

@BenjaminSerge 2 месяца назад

I know it doesn't matter it just seems strange to me, never ridden a bike with the brakes backwards. Do you also put the clutch on the right instead of left on your bikes? I'd kill myself on a bike with the front bake on the left, much the same as using your clutch foot on the brakes when driving a manual (stick shift) car, you'd press way too hard as you're used to pressing the clutch to the floor ;) Loving the project, can't wait to see it finished 🙌 😀

@Iowa599 2 месяца назад

3 chains instead of one chain is 3x more reliable, right?