Honda Mower Won't Self Propel? Replace pulley 06726-VE1-305

Подписаться 33 тыс.

Просмотров 91 тыс.

50% 1

This video provides step-by-step instructions for replacing the blade holder on some Honda lawn mowers. The most common reason for the wheels not turning are problems with the belt.
In this case the belt drive pulley needs to be replaced. It has a new Honda part number 06726-VE1-305 now, and i show you how to replace this part quick and easy. As you can see in the video, my 13 year old mower runs as good as new after this quick and easy repair.

Хобби

Опубликовано:

13 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@pat8988 Год назад

My yard is mostly weeds with a lot of dirt, and this causes the pulleys to only last about two years before they wear out. In my experience, if one pulley is worn out, then then they're all worn out. So replace the drive & driven pulleys at the same time. It will save you from having to disassemble the underside twice!

@paulwilson6522 Год назад

Great video! Straight forward with useful information.

@andynewman1320 Год назад

Excellent video! Appropriate use of the "righty tighty lefty loosy" rule. Hahaha! Thanks for posting.

@MegaSafetyFirst 4 года назад

Very helpful. Thank you for sharing 👍

@fishycomics 4 года назад

Honda never dies, luvem.

@billplatt9936 2 года назад

Good up to the point where you used the pry bar to create some slack to the belt... Where did you place the pry bar????

@21dirtyj 11 месяцев назад

Has worked great for me, would recommend.

@jed2055 3 года назад

My low (tortoise) speed doesn't work but fast (rabbit) speed does. Must be an adjustment only. Mine starts first time with the slightest of pull at the compression stroke.Wonderful engine and is this year 20 years old! So you've got a few years to go to be truly impressed. Honda make great 4 stroke engines with built-in reliability.

@mygiguser 3 года назад

they do! i love this mower.

@georgecarter2357 Год назад

Thanks

@smunro851 Год назад

I have a hrs216. No bag attachment. I’ve had a lot of trouble with the self propelled system locking up when putting the mower backwards. I’ve watched a few RU-vid videos in relation to this problem. It’s always pointing to the drive shaft being scared or something else. The last time I tore it apart there wasn’t anything wrong with the shaft. So evidently that’s not the issue. I plan on next time the drive starts acting up, I’m going to completely remove the drive system and run it without the drive. I wish I could get the Honda engine on a snapper frame. Then I would have a great mower.

@smunro851 Год назад

“Pulling”

@jmcintire708 2 года назад

Sehr gut!

@jvjdrn Год назад

Thanks!

@bluedevilz3898 2 года назад

I think my mower has the same problem, I push down on the smart drive and nothing. It will squeal at times, however doesn't engage forward. Also using the mower just pushing, no smart drive won't damage it?

@willbuckley54 3 года назад

My belt has just come off. Is there a way I can slip it back on without removing cover? Thanks

@RS-wm3mn 3 года назад

I have the same lawn mower.. my self propelled is not working and my propel wheels are stuck on forward only.. they lock up if I pull the lawn mower back.

@congangbannuocgietdan1410 3 года назад

My Honda mower is 15 yrs old and is having the same problem. I'll open it up to see whether it's the belt or the pulley.

@mygiguser 3 года назад

Cộng Đảng Bán Nước Giết Dân good luck!

@bethweaver278 Год назад

So that new silver (bow tie) under that blades (crank shaft) did it??? I replace back wheel & nothing😫

@MariaRodriguez-uc6dq 3 года назад

My Honda mower has two blades but it will not stay engaged to cut . Im sure it is a simple fix , the second blade control does not engage

@firstchoicelastchoice28 3 года назад

0:50 where are the gloves?? 🤪

@ngtatsang7690 3 года назад

My Honda can propel on easy smooth surface like concrete. But doors not propel on thick grass. Do you think it could be the same issue? Can you provide the part number? Thanks for a great video!

@mygiguser 3 года назад

Could be the same issue. If you turn your mower around, and engage the clutch (while the engine is off, and spark plug unplugged), then you would see if the belt is lose or not. As for the part number, they could be differrent between mowers, google for mower parts and search parts for your specific model.

@whereswaldo5740 2 года назад

You can visually see once it’s turned over. Mine was slipping as it’s like 20 years old it’s a Harmony. I watched the videos and checked things out. What I did was at the lowest setting on my Dremel with a 1/2” coarse drum sander band I just nicked /scuffed the sides and corners of the narrow part of the belt. It worked real well. I turned it over let it set for the oil and after starting it and engaged it it grabbed and took right off. It worked great. I also replaced both rear drive wheels as one wire completely through to the hub. There’s a great video on that. Clean up everything lube it and it worked great.

@seannguyen6991 4 года назад

Where do get the tool puller to get the part off? Thank you

@mygiguser 4 года назад

Harbor Freight

@needsomeink 2 года назад

I just replaced my belt, which was destroyed, and for some reason it will start to propel and then stop. Any ideas?

@mygiguser 2 года назад

if the pulley and the belt is ok, then all that's left is wheels and transmission.

@stevejette2329 4 года назад

How did you know it was that part ? Not the belt, transmission, etc ? Thanks

@mygiguser 4 года назад

steve jette you just look at the belt, and then you could see that the pulley was broken into two pieces.

@joec2704 Год назад

My rear wheels spin when I lift them off the ground but when I set them down the mower will not move forward. When I push the mower it sometimes give resistance. Any thoughts??

@mygiguser Год назад

hard to say from here, but probably belt worn out or disc damaged

@joec2704 Год назад

@@mygiguser I adjusted the cable and that worked. Thanks for your reply

@Micha62er 3 месяца назад

Where are you from ?

@maggarlion 2 года назад

I want to buy the puller is there a link for it. Please

@mygiguser 2 года назад

harborfreight.com/3-piece-two-jaw-puller-set-40966.html

@mygiguser 2 года назад

just search for two jaw puller

@maggarlion 2 года назад

@@mygiguser Ok great I got it and its near me in White Plains.

@Losdaman 3 года назад

How does this part effect the self propel? That doesn’t make sense.

@mygiguser 3 года назад

it doesn’t? the belt transfers the rotation of the part into the rotation on the rear axle.

@Losdaman 3 года назад

@@mygiguser I see how that engages the propel drive. I just changed my clutch cable and belt. The part replaced is what moves the belt running to the drive transmission. I verified the wheels are driven by a metal gear on the wheel and drive axle so they’re not worn or broken. My problem is the wheels spin but don’t have any torque to push the mower.