Honda Rancher crankshaft part 3 of 4 engine rebuild 

thank you for this video. im about to convert my 2016 es to footshift with all oem parts and it showed everything i needed

First off, thanks for the videos, they were very helpful to me. I swamped my 2014 rancher and needed to do a complete overhaul. I don't have a repair manual and just went by this video for reference when reassembling. ONE THING, this should be edited in the video; the gear indicator switch has to go in a certain way. BE SURE TO MARK THE SWITCH WHEN REMOVING BACK COVER. mine is now upside-down so it will only start if I hold the shifter hallway between 4th and 5th gears. other than that, videos were spot on

Great series, thanks for taking the time to video it.

Thank you for Video. Save thousands of $$$$. Thanks again.

Well done ✅

Great video, I rebuild my engine it runs great , I have one problem my nutrial light not coming on in the right shift position, but I pull up a couple gears the light will come on and bike will start

Conheço muito desse Motor trabalhei com ele muitos anos e posso afirmar que é muito bom.

My shift shaft pulled out a bit from the rear side of the crank cover. Now it doesn’t want to push back in. Is there something wrong in the front side?

QUESTION! I have a 1995 Honda 400 fourtrax apart. When I pulled the engine apart, I had a bushing fall off. The bushing has a shoulder on it but it seems you can flip it both ways. What way does it go?? The shaft is the shaft below the reverse gear.

I've rebuilt my motor top to bottom using these series of videos and they are awesome. only one problem I have ran into. once all back together I cab get trans to go into reverse out of neutral but will not go up any gears. any idea what I might have done wrong? I know it's a long shot but anything could help.

Is this pretty much the same for a 2004 450 foreman? Have one I bought tore completly apart and need to rebuild. Cases are split and every individual piece of the engine is new please reply

Correct me if I’m wrong,gear position sensor was put n 180 off.When you crunk motor up.It didn’t indicate it was n Neutral did it?

Where did you get that timing hole cap . I stripped my stock one

What exactly was wrong with the motor? My 420 all of sudden locked up, your videos are very helpful. Please replay ASAP!!!!

Muy buena. Un video en castellano por favor gracias

Pucha man tiren un video en españ

Precisando de um Mecânico que conheça essa máquina e só me chamar monto e desmonto rápido e com qualidade.