HOODSTACK 12V FIRST GEN CUMMINS FIRST TEST DRIVE.... "HEY HUN, CAN YOU UMM PICK ME UP??" 

Greg: "you pay what you get for" Channel" "yOu PaY wHAt yOU geT FOr"

I think the first gen just became my favorite truck out of all of them

You should sell the ranger and daily drive the first gen

Hood stack was deff a good choice, pap scrap is looking money 🤙🏼

I wake up everyday to Gregs videos... The make my whole life better.

"I think she'll stop" -Greg A. 2017

So stoked to see this thing on the road, great work man! I really like the way you've gone about this project adressing the fundamentals like steering and braking first rather than just throwing on power upgrades as soon as you got it. Nice music choice in this vid as well.

Congrats on getting her driving!! Been following since the beginning! Keep up the awesome videos. Gives me motivation to keep going with my build.

I'm not even a Cummins or dodge fan but I subscribed to the channel after watching a couple videos, very entertaining and informative keep it up!

probably been watching you for a couple months now and must say this is the most emotion I've seen from you yet and congrats on the truck.

congrats! lots of fun to be had in the near future with this rig!!

happy for you it's always nice to get projects up and running

Congats!! on the first drive. The truck sounds AWESOME.

I miss my first gen. Following this build makes me want to build another. Thanks Greg! Awesome drone work too lol

Glad to see it up and running!!

Yes I can't wait to get the notification for the new videos huge fan really dig all your truck builds

Finnaly! I have been waiting! Love it!

AWESOME 👏🏻 HELL YEAH!!! Glad to see her going and looking forward to more to come.

Started watching your channel right when you bought this old goat! Glad to see she's back up and running. Love everything you and the boys are doing! Keep it going, it's giving me the motivation to get a Cummins back in my life. Personally would have gone with the flat top stack though but that's just me.

Awesome video as always the glad to see the ol 12 valve back on the road she sounds pretty healthy

Great video once again greg! 1st gen is getting closer and closer to the finish line! Stay blessed Greg!

Greg A with all the feels. Glad to see the first gen running. For whatever it's worth, the music\song in this video is my favorite.

Iv had my project truck for two months and I have only taken the thing apart. My first gen has the same paint from the factory as yours but it is getting painted black.love watching your videos.

Love it! The first gen is what I am.looking for! Keep up the great work!

I love the videos. The first gen came out sweet as hell. Can't wait for the other truck to fire up as well. Keep the videos coming they are great.

liked the vidja before ad finished. This makes me happy

Pap scrap looks awesome Greg! So nice to finally see that thing rollin.... keep up the good work!

Hey Greg A, I found your channel a couple of months back when looking for info on the 12v Cummins! I live in the UK and Rams are rare here. although a friend does have a 1500 with a Hemi😒... the only trucks we get here in the UK are really the same size as the Danger Ranger, we don't even get F150/Ram 1500 (only on import). Anyway, I just wanted to say thanks for the videos, they really are awesome, and thanks for teaching me so much about a truck/engine I'll probably never get to see in real life never mind own! Good luck with the future, keep it up!!

love the videos keep up the good work

that is one bad ass truck i love it i love your videos keep up the amazing work

Love the vids!

Greg you have me jonesing for a 1st Gen now! Awesome video and great job!

love the look of the truck man .. everything turned out great

Best truck channel on RU-vid.Keep up the great work guys !!

Best truck channel on you tube. Greg you are awesome buddy!

It's awesome Greg keep up the great work!!!!🤘🤘

The look of stoked on your face. Love it. Know the feeling. Loving the vids. Literally bought the exact same spec truck as you at the exact same time and found your channel. Pumped on your build. The only thing I can see different is I have a manual trans and burgundy interior. Truck looks awesome and was wondering - will Greg be getting her a little lower? ;) Keep up the good work and thanks from Canada!

Greg keep up the great work and continue to keep it real!

Good job Greg! This turned out better than I thought! All you need now is a paint job!

your doing a great job keep up the good work👍🏽

Love the equal right rear tire smoke to hood stack distribution! Ha ha ha congrats on getting the first gen going!

Nice work, Greg A. Really enjoy watching the culmination of all your hard work. Keep it up.

Nice job! I love this build!!!

Am I the only one that thinks the starting of a cummins is just amazing?

so simple but yet so friggin clean!

great looking truck I've enjoyed the build video's

Greg your doing a hell of a job buddy. We all see and feel your true passion. Keep it up!!

Greg on the Lincoln locker idea. I welded the open 11.5aam in my 05 dodge and broke two shafts. One at 550whp and at 630whp from hopping.. I haven't broke a shaft since I added caltracs. it's a ton of fun with a spool. Make sure and clean the carrier good with non chlorinated brake cleaner and cover the bearings in thick tin foil. spray into the splines an anti slag spray. most you can just clean out with a flat head. try to heat up evenly before you weld it. cool it down slowly w/ torch then bury it in a bucket filled with kitty litter.. dont stress if you hear a couple loud crack noises. lol 30k of abuse and 4 sets of rear tires later it's still going strong. hardest part was lifting the carrier back into the housing, lol. 👍

When can we get some footage of the hole in the block ucc truck? Just wondering what is going on with it

Raising the roof 🙌🏻 Greg!! Keep up the great work!! 👍🏻

That's truck looks great with the hood stack so glad to see it out driving

Watching all these videos has convinced me to pull the trigger on my own deletes. I look forward to these videos more than any of my other subscriptions!

holla from Alberta Canada, love your content!! don't own a diesel quite yet, but your rigs a awesome!! keep it up!!

Greg A thank you for the videos :D

Really curious on your piping for your hood stack and how you made it or where you got it made? Would love to hood stack mine but just so confused with the piping and making it all fit as clean as you did yours, looks awesome!

Congratulations man! Your doing a he'll of a job hard work pays off.

Great job greg Do you guys use any additives in diesel to keep pump lubed

the truck is looking good so far!!

first test in mine today- wheel fell off. I may have forgotten to tighten the lugs in the adapters. I don't know, I thought I did. rechecked all lugs, ill see if the wheels stay on tomorrow morning

I’m only 2 videos in and this channel’s cool asf

Greg! That dude said South Africa! You should be of yourself brother. Haven't missed a vid since I first saw you guys with the sendit locating tool😂😂😂 thank you for clean videos too man. God Bless

Love it that thing is awesome Greg keep it up bud 🤙🏽🤙🏽

Love the truck man looks beautiful

Man now that's a slick looking truck?with the hood stack and the tire/wheel setup. I'd look for some way to protect that patina and call it a day. Awesome video as usual Greg.

love that 1st Gen. So cool. Keep up the videos Bro.

Greg, great video!! I know you like suggestions but for filling up a coolant system without burping it, grab a AirLift tool. works wonders!!

I love the rustic look, dope as hell

Coming together nicely.

love to see it running... great work... love the c sounds... 👍

nice work Greg!

Congrats on yer hard work bud

Love this truck bro gonna get me another one very soon

thanks greg now im gonna get my hands on one

You may have already, but just in case you didn't, you might check out the bottom corners of the radiator support. I have a 91.5 and I had to massage the corners a little bit so they didn't bite into the bottom of the end caps of my Mishimoto radiator.

Greg! I feel somewhat inspired to keep my first gen resto going. any idea if any of your buddies have a lock on a clean first gen 8ft bed? I'm the state down from you let me know!

"Nothing is going to destroy my motor without having an air filter on it, I promise" - Greg A famous last words

Still loving the vids and especially the 1st gen! The headlight trim rings on pap scrap would look good blacked out I think!

looks great greg!!

love the look on the truck...and sound great...

get a lunchbox locker for it. They are noisy, but you won't hear it over that thing! love it!

good job brother from your boys on the West Coast

Another great video by Greg A Inc. 👍🏻👍🏻

Good glad it all went well are you going to do the body work up on that one

Truck looks really clean so far Greg. The wheels and tires look way better on the truck! In my opinion the hood stack is a few inches to tall but the truck looks awesome.

must be such a great feeling after all that hard work

Greg been waiting just under 2 months for a burnout, we need some audio on those burnouts brother no music! keep up the good work. next up the 05 can't wait

That truck is really sweet of course it's still a work in progress but great job I think it'd look good painted gun metal grey if you decide to paint it

1st Gen is coming along real nice ready to see those fuel pump mods

Is the brake light switch stuck on or do you just not have the headlights and parking lights hooked up yet

Greg A is the man ! Hardest working dude on RU-vid !

Sounds good. great job

It's best to pour the distilled (like anyone uses that) first that way if it leaks it's not precious coolant

You should run it the way it's set up to get a baseline and then do the upgrades you plan on doing to see how much it gets better

I'm in love with that first gen!

Good looking truck 👍and awesome videos

Loving the mopar 👍🏼

Hey Greg I was looking at getting a tuner for my 01 7.3 I know this is not Cummings related but I was looking at getting the bully dog gt or maybe you had some suggestions?

Awesome video man! Keep up the good work. Chop it and make it a short bed lol!

Sweet truck. Love the hood stack!

That's a sick first gen. I'd love me that truck!