WHAT HAVE WE DONE NOW :( THIS POOR OLD 12 VALVE CUMMINS DIESEL TRUCK 

"They're like fat girls they're fun till your friends find out"😂😂😂😂

No Boost is my spirit animal. Dudes Awesome. Walks through the door and the video instantly gets better. Dont worry Greg your amazing too.

no boost looks like he's a blast to be around...bet y'all have got into some trouble in the past... lol

Take a large pot and fill it with water, bring the water to a boil and pour over the dent. When the dent has been pushed out pour extremely cold water over it to harden the metal and set the shape. Then it is just sanding and re painting.

i am glad you tried my idea on the basketball. All the way from oklahoma.

I did a gas delete.- Greg A 2017

Hey Greg. Ford and every other manufacturer tends to put coolant drains in the worst possible locations. I used some stainless pipe fittings and a 1/4" ball valve on my radiator to re-locate the drain past the frame rail. Makes any cooling system maintenance a whole lot easier. Just use a 90 on the end of that valve and plug it when you're running it to prevent any leaks. Hop this helps if you haven't already considered it.

Stud welder and slide hammer if u can get ur hands on them

NO BOOST MAKES THIS SHOW

I hate those plastic fuel cans it's like they come up with a new design for a so called spill proof spout but i think they make them spill gas everywhere I use an old fashioned safety can they're an all metal can and they have the spring loaded cap and handle you just squeeze and the lid opens up and lets you poor gas into what you want and then release the handle and it springs back closed they even have little funnels that slide over the pour neck and that way it funnels gas into the tank of your equipment I've actually spilled way less gas if any with that than those plastic ones

I can't believe how that basketball pushed that dent out. Now get a piece of angle iron and put 3 or 4 vice grips holding it to that support and that should keep it from bending.

up next: Clutch switch delete

IT'S AN OLE 67 JOBIE!!!Hahahahah fml the way he said that had me rollin!! 😂

someone get Greg A some 12 ton jack stands

It's funny to see you guys shopping at the same stores in my hometown, can't wait to see you around haha

Grab the VP 5 gallon race can/filler tube setup. Works the best for everything.

I agree on the paint less dent removal, its sweet

There is always someone who parks next to you when you park far away.

For that first gen dent try one of those hand pump air wedges AA uses for lock outs to get your doors unlocked

off bug spray in the green aerosol can spay it on and scrub it with a plastic bristle brush. I've used it on plastic trim and it's worked great

moped with a turbo!! PS I use a 1 liter water bottle as a drain just trim bottom as needed, works well as a oil fill aid also.

Oh can't forget Johnny's favorite BFH for body work and turbo installs............

The boys I'm my detail department use the Mr. Clean magic eraser to get the wax and compound off textured parts. And it really seems to work. Give it a try next time. But your 100% right, the best way is to just not get it on them in the first place.

they have like a suction cup dent remover that you stick on there squeeze the handle a few times then pull the dent out it works on small dents i have used it

also works great on cloudy oxidized head lights spray it on let sit for a few seconds scrub with a towel and buff them out

Use gasoline and that comes out with a hard plastic brush, I do that all the time :) dip the brush in a shallow puddle of gasoline and brush the polish thing out. And 130PSI won't rub the paint job :)

You guys are crazy together 😂😂😂👍🏼

That voice crack 8:44 😂😂

93 octane in the washer, not the point. Gas with no alcohol in it. The regular gas with alcohol goes bad more quickly as the alcohol evaporates. There is a magnetic dent puller, that may not work with too deep a dent, that may be available at shops that will rent service tools. There is a set of keyhole studs that can be welded on, in a row. Then a single bar will pull the studs all at once. I refer to a set as shown on an episode of Wheeler Dealers.

The fact that the tow pig is a stick 😍

I would try cutting a 2x4 to length, and brace it between the box bracing, and the trucks frame, then get back to it with the basketball, another thing you could try as far as tight fit would be a 10" scooter inner tube. (shout out to no-boost)

Belltech makes a great set of shocks for this truck i have them on my 1988 dodge d100 and they fell great. Belltech 9622 Street Performance Front & Rear Shock Absorbers

No Boost Returns!!!! Lol pappy Scrapy hates the "resting place" he wants to be driven thats what his purpose in life is, new parts = more adventures 🤷🏽‍♂️🤘🏽

I understand this is a truck channel...but of all the wonderful things you could put on the nav display...you chose a picture of a truck...that you're driving. Lol

Greg, Several ways to get that dent out. I would use what they call a body spoon. You should be able to pop the rest of it out with one of them. Start at the shallowest part of your dent and work around the edges toward the deepest portion. You could also take a large washer, braze it on the outside and pull the dent with a slide hammer (gently!).

that 08 sounds amazing

look up a LTI tools 790 dent roller. it is cheap and goes on the end of a flat blade pry bar. it's perfect for dents like that.

Also huge fan of the show seen it since day one and I'm not even a truck guy 😂

The adventures of Greg and Jesse are cool vids sometimes also wawa is the best

Bucees is the King of convenience stores so don't play

I love wawa here in FL

Ayyyyeee finally no boost is back !

Jesse, don't kid yourself, you know wawa hoagies have been shit for the last 10 years since they got rid of amaroso rolls and fresh cut meats. Sheetz is where it's at now.

Wawa ain't got nothing on Quick Trip.

There's a cool Snap On dent puller that Joel from the Snap On Tool Review recommended. The price was actually pretty reasonable. Might be worth a look.

PPG Wax and Grease Remover will remove the buffing compound. Use a tooth brush and work it into the bed liner then wipe if off

what kind of stereo do you have in the 05? I think it's neat how you have your truck as the background on it

With a look of frustration on your face I don't think Ding-A-Ling was the first word that came to mind to call no boost 😂😂😂

The voice crack at 8:42 lol

Nice.

WAWA GANG FOR LIFE

12 year old voice crack mode activated @8:44

Try a plunger for the dent they work wonders

you need to get a hold off loud and proud the have a a first gen front grill all original for sale in good condition

block the back of the support with a 2x4 to frame and retry. even try with a mini b ball

Harbor freight tools has a body work hydraulic ram thingy

First thumbs up!! Keep up the awesome vids @greg, Jesse No Boost, and Jon Send It

Gopro suction mount to pull the dent out of the 1 gen

get one of those really small toy basketballs from a sporting goods store

quicker than expected. lol that's what she said

If you go on ebay there is a seller who sells gas can spouts like the old fashion non dumb kind.

I use a 1"x4" piece of plank and a wedge

them shitty gas cans are "spill proof" because you are supposed to hang the black tab on the spout on the gas cap lip & use the weight of the gas & can tho open the spout not hold it open with your hand... but I done it that way for years before I found out! just busting your balls. keep up the good vids fellas!

Il come do your airbag recalls for you

hey loud n proud (a youtuber) has a first gen Cummins grill he's getting rid of look him up. I don't remember if the grill was bad on yours!

I didn't notice any blocks in the front or back of front tires.

Voice crack 8:42 lmao

Jesse makes the videos!!!!

Get the Huffy! I want to see no boost on it.

how does the sendit body and paint store handle pulling dents................. Anybody else wanna see that episode!? I bet it involves mama's best good shovel, left handed crescent, and that die grinder I know works good for quarter panels LMAO

I'll stick with the 65 degrees here in AK

Here in Denmark we can only get 92 and 95 octane gas... oh and Shell v-power 97 octane

101 in my area south Texas

you going to spray underneath or minimize that rust?

first Gen grill for sale. .that loud and proud kid

Use coke-a-cola on the rusty U bolts. Coke dissolves and loosens rust.

0:33 no booooooostttt

Hey Greg, just wondering why all off you guys are running single gauges instead of an edge monitor that does all ish

Use a football for close spots like corners.

You left your receipt at the pump!

they sell replacement real gas nozzles at tractor supply, screw those spill free nozzles

Use Peanutbutter the oil pulls that white out .. FYI Greg .... love the vids hit me up for a intercooler for the first gen

No boost is Jessie no work! Ha ha

How much do dealers in the states charge to make another key fob for a 3rd gen ??

Try it with a football😂😂😂😂

any chance of a 6.6 lb7 project in the future??????🤠👍

Why not get a mini basketball and try the same thing on that bedside? It's worth a shot!

Use a Porto jack

What kind of radio do you have ?

Get some powering blocks man shits easy

same technique, works on the wife. Cheers, send it!

2.89 for premium aint too bad especially for being up north, my truck gets premium here and there, who doesnt have premium

feel bad for you guys living in jersey. taxes are bs there.

Pap truck vs Scrap truck when done at the track

u could just stick ur left foot in too lol

tc9700gaming said he supports your build and your channel and that he likes the 1st gen

Well we still don't know if anyone parked next to you

Jessie is right wawa is the best.

yo chill of _no boost_ greg the emotional

93 on my lincoln clone 24/7