How Did I Not Think of This Until NOW?

Подписаться 282 тыс.

Просмотров 646 тыс.

50% 1

Looking for DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES, DOUBLE SIDED TAPE and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstore.com/?streamer...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
VISIT THE INSPIRE WOODCRAFT SHOP: inspirewoodcraft.com/product-...
Adjustable Box Joint Jig Plan: inspirewoodcraft.com/product/...
Multipurpose Shooting Board Plan: inspirewoodcraft.com/product/...
All Purpose Tapering Jig Plan: inspirewoodcraft.com/product/...
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
PATREON: / inspirewoodcraft
INSTAGRAM: / inspirewoodcraft
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s RU-vid channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful.

Хобби

Опубликовано:

2 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 808

@jameswalsh4056 Год назад

As a novice woodworker I say thank God for shims, jigs, templates and clamps. Oh....and for guys like you who share these ideas so generously. This is a real good one.

@theoriginalmonstermaker Год назад

Jigs are truly the best way to get into wood working... they may never be a "show off " project, but things like this are what allow you to accomplish WAY more with limited tools and are great practice projects when being started (not to mention the understanding of mechanics they instill). Very helpful!!

@brandonhoffman4712 Месяц назад

This is a cheap diy copy of the bow table saw fence. Better diy solutions exist as well. Using a 1030 t-track to keep the fence a fence (smooth vertical face) with the clamps working off the t-slots. If you wanted you could even mount mdf to it for a fence 10" tall if you wanted. And undermount supports to it for long boards. Both on the infeed and outfeed if you wish.

@lincolndickerson1293 Год назад

Wait!!! You can actually extend it farther as an infeed for longer boards by simply pulling your infeed toward you more and then clamping. This is fantastic! For those of us with contractor saws we can do infeed and outfeed both! Leaving the feed boards farther apart than the table top for flexability. As alway, inspirational!

@lincolndickerson1293 Год назад

In fact, I am going to go make this right now. 🔨🪚🗜

@VAFSH4LIF Год назад

That was my thought also. As long as its tight down to the table and fence it can hang off the table 3 feet or more? It's a great addition.

@FallLineJP 5 месяцев назад

Yep just make sure the saw is fixed in place well. If it’s free standing, introducing a longer lever arm can make it easier to tip over 🤓👍🏻

@dllion3196 5 месяцев назад

Good idea. One tool, two good and necessary functions.

@Mosessousa1 4 месяца назад

Could even add an out feed piece too for smaller jobsite saw I guess. But I got skills, so I just cut it as is

@joewatts7942 Год назад

Jodi you just taught many less experienced woodworkers how to have a safer day in our hobby shop. Thanks Buddy

@cgodlove 5 месяцев назад

Thanks for the idea! An aluminum strip edge could help keep it true over time. And for those of us with smaller portable table saws (eg Dewalt), a little outfeed support on the other end could be really useful for many cuts.

@zootechdrum 4 месяца назад

100%. That's what I got

@markjess1138 Год назад

An absolute obvious fix that most of us overlook and continually struggle with. Great job creating this, it's awesome!

@wittworks Год назад

Bro. Such a great idea! Thank you! I don’t mind the talking to the camera. You’re a great teacher. A+ thumbnail and title. 🤜💥🤛

@brandonhoffman4712 Месяц назад

Check out the bow table saw fence. Consider a diy solution using 1030 t-track as an upgrade.

@allendiaz9031 4 месяца назад

Thus us a good idea for boards from 4 to 6 feet, but for longer boards I had an infeed table on wheels. One can use saw horses with a table top, which of course would correspond to the height of the table saw. As a professional woodworker and instructor it's always best to take the time to fabricate jigs or set ups for safety and of course the end result is greater accuracy. I'm 78 and it does my heart good to see so many people enjoying the art of woodworking.

@johnwente1413 Год назад

You could also attach a couple of feather boards to your infeed table to make the wood stay down on the infeed. That's one less variable you have to deal with. Of course you could attach the feather boards to your regular fence as well when you don't need the infeed board. For a narrow board like the one in your demo, you could also use feather boards on the saw table. That takes care of all the variables except feeding the board through the saw blade. You would only need the infeed table for very long boards if at all. Wood workers have been using feather boards pretty much since the invention of the table saw.

@ppudelko9120 Год назад

Yep, feather boards for me, too! Plus one infeed and one outfeed roller stand for eliminating the horizontal wobble. Not saying this is a bad solution but mine is much more universal for more machines, eg. a router table, thicknesser, etc.

@parzdiver Год назад

Wow. What a difference this jig makes! I have a small job site saw and infeed stability has always been an issue. Just taking a small board on the bottom of a fence extension made a huge difference. Thanks for putting this out there.

@TrickyGomez Год назад

The main purpose for this is for giving LONG boards infeed stability and extending the outfeed fence as well. This is a great idea since it can be removed and installed in a flash... If the boards are not too wide you can use it with a feather board if needed. Thank you!!

@regularguy9264 Год назад

Izzy Swan came up with in infield table extender a while back, but I very much prefer this. The extension of the fence should help a lot. I guess a feather board could be added depending on the width of the stock too. I have some scrap plywood that I am going to use for this jig. Thanks!

@kenreynolds1000 Год назад

I have the Izzy. Smaller and also has a slot. Helps a ton with sled management. I do 8 footers and that is what I need to control.

@regularguy9264 Год назад

@@kenreynolds1000 good point about the sled slots with Izzy’s.

@twong789 Год назад

Yes I agree. This is a great jig. So simple in design and concept, that I wonder why no one has come up with this idea before. I joked around that it should be "patented". Ha Ha.

@andrewbieger5004 Год назад

Great stuff. In addition to helping with the infeed side of things, this jig likely keeps longer rips straighter. I have always had trouble keeping real long rips super straight, which is critical for many builds.

@bmail3 Год назад

Yes! The in-feed side is where I need the support. I have a contractor saw and adding in-feed support & auxiliary fence was one of the first things I did. I went whole hog with a quasi-permanent attachment, but this would work great too.

@csimet Год назад

Great idea. This, in combo with my collapsible roller stand, is all I'll need for in-feed of long boards. I also move my 2x6' workbench over a couple feet to supply something to rest the workpiece on before the cut... just to make it easy on my arms. It sits just to the right of the saw on the in-feed side.

@williamfitzer4805 Год назад

I made mine with a laminated pc of plywood 14” wide x12” deep for the extended table and the fence gives me 42” of fence support in front of the blade. I rip a lot of 8/4 walnut in lengths up to 75”. The larger table support and longer fence make the process simple and easy. Great auxiliary pc to have.

@joec96 Год назад

I really appreciate your info. I'm just a beginner but I still use a bunch of your tips. Even if it seems simple to you, it never hurts to get instruction on how you built it.

@christopherdahle9985 Год назад

Smart idea. I've made several crappy, quick and dirty temporary infeed tables that attach to the fence rail when I had extra long stock to rip. They were always fussy and ended up getting torn down and repurposed once the job was done. Yours would be worth taking some extra time to make carefully to last and I think I will. Not going to make it today, but I've noted this video on my shop's chalkboard and the next time I need to make long runs of custom baseboards I'm going to whip one of these up. I immediately started thinking of ways to make it "better" but really, you've trimmed this down to it's essential function to create a shop appliance that is simple and easy to build. Well done and well explained. Thank you.

@rockyriddell8671 Год назад

Brilliant! You have addressed a common problem with elegance. A great solution for small portable job site saws that have that problem to an even greater extent than stationery shop saws.

@rhettdunn8788 Год назад

I just built an infeed extension with some matchfit clamps. Super helpful. And nice to be able to use it on the left side with a miter gauge. But this is a great option for a quick fix. Nice work

@brianpaasch2665 Год назад

Really happy to see this! I’m a novice woodworker and I built one of these jigs a few months ago. I’ve wondered about it as none of my RU-vid woodworking buddies had recommended this jig. (That’s my term, none of my “buddies” have a clue who I am!). I’ve got a DeWalt jobsite table saw. The table is slightly larger than a postcard. No meaningful infeed or outfeed, no home-built surround… just the stock table. My jig is an extension for both infeed and outfeed. I glued together two MDF 1x4s as the auxiliary fence. I ripped a tiny slice off each edge to get rid of the rounded edges. I glued 1/8th inch hardboard, 4x12-inch for the infeed end and 4x18-inch for the outfeed end to the bottom edge of the MDF fence. Drilled three holes in the top edge of the MDF for three universal fence clamps and, that’s it! This is my most used table saw jig, love it! But… as a novice, and since none of my buddies had done this, I kept wondering if this was a bad idea… was I missing a safety issue, or what? Jodee, you just validated my jig, so thank you!

@hansangb Год назад

I had the same saw. Make sure you sand the miter slot to make it perfectly smooth. If you use Incra or other types of adjustable miter gauge, it'll make a world of difference. I liked the dewalt for adding rack and pinion fence that's sturdier than most saws in this class. I made a quick video on adjusting the Incra and sanding miter slot. But use a plywood+sandpaper after feeling for bumps along the miter slot.

@brianpaasch2665 Год назад

@@hansangb Tamar at 3x3 says the same, sand off that coating on the miter slots. I haven't been brave enough to do that yet. But yes, the miter runners on my jig/sleds bind and stick a lot. And running my finger along the edges of the miter slot, the coating is obviously lumpy. But since the table is aluminum, I'm afraid I'm going to damage the miter slot with the sandpaper. edit: Found your video. Good info. And I love that you're using a paper cutter. My lever arm paper cutter is my go-to tool for making thin shims (paper!). Thanks!

@danceswithaardvarks3284 Год назад

Great idea incorporating the outfeed. I'm working in a small space and have to keep the saw against a wall and roll it out for everything, so I'll be sure to include an outfeed in my build.

@dwightl5863 Год назад

@@brianpaasch2665 The table is aluminum, not cardboard. Don't go hog wild on the sanding. A couple of passes with the sandpaper and try it. Still rough, couple more passes and try it. IMHO

@davids2530 Год назад

Brian - I have the Dewalt job site saw. I bought an Incra miter gauge. I pressed some 220 sandpaper against one side of the slot with an 8 inch straight piece of wood (I had some hardwood flooring). I ran it one time on each side. Then ran gauge through to locate high spots. Removed very small amount and tested again. Incra gauge is adjustable but has min and max widths so take your time when sanding.

@bobtaylor7361 Год назад

I made one about 2 years ago. Added turned legs for kitchen cabinets. Cut 1/4 of leg out to sit into corners. Cut 10 legs perfect. Held from to legs as I cut and being turned legs. Made it safe. Glad to see you do it. I feel better now.

@b1j Год назад

Nice idea, well executed. I use a roller stand at the infeed (and outfeed) for long boards, and a feather board to keep the work registered against the fence. As the cutoff gets wider (no feather board) I can move more around the left side and push right while also pushing forward. But it’s always nice to have more infeed fence, so good work.

@timhankins3436 Год назад

Great idea.

@gregwyatt6534 Год назад

The one problem with roller stands is that if the roller is not exactly 90° to the blade, it will push the timber/lumber sideways a little.

@michaelwalser9497 Год назад

@@gregwyatt6534 If your roller stand is one roller this is true. If your roller stand is a bar with multiple "bearing" type rollers no problem and far less friction. Look at the tables used for CNC style saws

@gregwyatt6534 Год назад

@@michaelwalser9497 correct

@3henry214 Год назад

Brilliance in its simplicity and functionality! Solves an issue that all table saw users have experienced and pretty much accepted or assumed as just being the nature of the beast. Definitely one of those ah-ha... so simple, why didn't I think of that moments.

@kencoleman7762 Год назад

Thanks for another straightforward and useful solution to a common problem. You frequently come up with "why didn't I think of that" helpful jigs.

@dennisyarbro1657 Год назад

I built a similar auxiliary fence and added some Jessum In-feed stock rollers to hold the work piece down and tight up against the auxiliary fence. My indeed support is a tad longer, but that with a roller stand makes even long boards (>6-feet) easier to manage by myself. Thanks for making such a good explanatory video to convey this idea to many others. Good job.

@vincentcoppola9832 Год назад

Great idea. Infeed rollers and table extensions help, but even with feather boards, which can flex, long heavy boards are not easy to keep aligned to fence. Thanks for video - think I'll be making one this fall - probably out of ash too.

@richpeggyfranks490 Год назад

I don't mind you talking to the camera at all. Your enthusiasm for this jigs is obvious, as well as your humility in knowing what a simple fix this is. Thanks for sharing.

@charlessas4138 Год назад

Great idea... I'll definitely be making one and using this jig myself. Love your videos and find them very educational😀

@joebeaton1101 4 месяца назад

Made it... Used it this morning cutting Teak panels... Worked great!! Thank you for sharing!!

@chrisgriffith1573 Год назад

I have that problem a LOT. Many of the things I do include a longer piece of wood that is harder to support at the beginning of the cut. I definitely will use this advice, thank you!

@markedward2987 Год назад

Great tip, thanks. I probably missed it in the comments, but, add a piece on the out-feed side similar to the in-feed side to create a mini out-feed table.

@daviddanahy663 Месяц назад

I made my infeed support using your great idea. I love it. It was super easy to make and it has given me the confidence to cut longer pieces. Thank you. I did one thing different with the material that I had on hand. By a stroke of luck I used a piece of white vinyl shelf board on the bottom of the L-shaped support. The white board creates an eye-opening contrast between it, the white shelf board, and the board I'm trying to straighten. Each time I run it through the blade I reference the bad board to the white shelf material before making another pass through the saw. This has improved my work. Thank you.

@jonstark4003 Год назад

Neat idea for sure especially the part that adds bottom support to the in feed. I think a featherboard would do just fine in terms of lateral wobble. Using your front arm to keep the board flat against the table saw. A long level clamped to the fence is also helpful for adding some support for the in feed/out feed.

@stevennachlas9596 Год назад

This is a great idea! I have typically been using one of those flips top stands from Home Depot which store away nicely and allow me to have infeed or outfeed support as needed. My workbench backs up to my tablesaw so I don’t need outfield support. But you make a great point that Infeed support is just as important. I may build one of your jigs just to see how it works. You solved the only concern that I had in that I like to use my tape measure on my fence rail, which is calibrated perfectly. By making the jig have a width of exactly 3 inches, or any other whole number, it makes it super easy to use. Kudos!

@rjrotermund Месяц назад

I love your videos, You always have practical simple solutions to common woodworking problems. I love your box joint jig and going to make a shooting board based on your design after I failed on a more complex design.

@whomadethatsaltysoup Год назад

Excellent demonstration of an extremely easy to build and implement table saw jig. Alas, I don't have a ton of ash kicking about my garage, so it will be 19 mm plywood. Thanks for sharing!👍

@rodparker4514 Год назад

Two feather boards work well too .

@chrisehlers6189 Год назад

Nice, simple idea! I will join the chorus and highly recommend you use a feather board

@poman8772 2 месяца назад

Finally I got around to making mine, and a buddy gave me a stack of scrap UHMW. So I used a pc of it for the input shelf. So grateful for your wood working tips! Thank you sir!!!

@danceswithaardvarks3284 Год назад

Brilliant thanks. I tried making one of these that clamps to the fence rail, but it was not so easy or reliable on a Bosch jobsite saw. Clamping directly to the fence is a whole lot easier, so I will be making one for sure.

@PriceyBuilt Год назад

Such a simple and easy thing to make yet so helpful. I had exactly the same problem and developed a very similar fence extension.

@woodwrkr6537 Год назад

Thank you for sharing this. I am an experienced woodworker and this will be an awesome addition to my shop.

@jackhegarty3495 9 месяцев назад

Thank you for this video great inspiration I have a small contractor saw on a rolling stand I made so built a copy of your extension which works perfect. Only change I made was to add outfeed shelf to other end since my saw is mobile and didn't have any permanent infeed or outfeed.

@hansangb Год назад

I know Izzy Swan made one that attaches to the front rail only. But your jig is simpler and has more capacity for support. NICE!

@SF-fm7ov 5 месяцев назад

I have 2 portable stands with a wide ball bearing roller on each that I use to support my infeed. Now I don't have to worry about the vertical movement. This allows me to stand to the side nearer the blade and easily guide the wood along the fence. This even works with full size sheets. These roller stands can be used other places when needed as well.

@jbb5470 Год назад

What a GREAT idea! Easy to build, easy to use and so simple to build. I gotta have one! Going to build it tomorrow morning. Thank you for posting

@dannyoktim9628 Год назад

Built that tool 20 years ago for my dads 1950 Craftsman saw. . .he loved it. . . Smart your able to use your scale +3 inches, that impressed me. NICE

@AdamFahn Год назад

I've done similar with a lead in extension. Wondered why no one else seemed to have done this. Mine doesn't have the horizontal piece though so thank you for the idea.

@Mixey360 Год назад

Best tip I've seen in a while. Thank you for respecting our time (and intelligence) by omitting the build. Subscribed.

@dottielynch9763 7 месяцев назад

I like the simplicity of the design. Thanks for sharing.

@danieldibiaso9342 Год назад

Simplicity and functionality, sometimes it hard to get both, but you did. Going to make one for my Dewalt saw and I’m going to incorporate a out feed table also.

@joblo574 2 месяца назад

Love the idea! I’m going to make one today. Thx for sharing.

@Hoeech Год назад

Dude, this is brilliant. So simple, but makes the job so much easier. I'm putting one of these together ASAP

@brianfoley4328 Год назад

Thanks...building one this weekend.

@Timber2Toothpicks 4 месяца назад

EXCELLENT Idea! It was right in front of us the whole time . Thanks again!

@kayakdream9864 Год назад

I've always just used an adjustable roller stand for this. Or two if the piece is REALLY long like 16'. Also my Unifence will adjust to bias the infeed. That said this is a good tip for novice woodworkers who haven't done a lot of workarounds as it looks like a bulletproof setup. And as others have mentioned featherboards will eliminate much alignment issues.

@jack5402 2 месяца назад

If you're worried about the board moving while you're pushing it through the cut, use some featherboards, either with or without this jig. They not only stabilize the board through the cut, they also help control kickback. The ones from Bow Products are excellent.

@InspireWoodcraft 2 месяца назад

@jack5402 I do use feathers from time to time. I actually have the Bow versions and I highly recommend them. Unfortunately feather boards don’t work very well with anything tapered, like a lot of S3S stock. That’s actually how this contraption came to life.

@ericliddle7556 Год назад

I like it! I can see adding an outfeed support for jobsite saws being a massive addition too.

@richragan4810 Год назад

Thanks Jodi for this simple effective idea I will use!

@MyGrowthRings Год назад

I made something quite similar for my saw, but I put the support at the rear, since I don’t have a rear support table. I use a Shopsmith, and because it has a tilting table, it’s convenient that that support moves with the table and the fence. it really is amazing how great ideas resurface throughout the community. Nice work. Scott

@MyGrowthRings Год назад

I’m sure this will wind up in your spam folder, but here’s a video of my fence extension and support: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1uzgMJ7wHgw.html Scott

@MMMS75 3 месяца назад

Yup! I had to do something like this when I was breaking down some very long 8/4 ash that was 10” wide. Plank probably weighed like 80-100 lbs. I have great outfeed support, but had no infeed support to handle that job by myself. And my table saw is a basic 10” Dewalt, which has a short infeed to behind with.

@jklein760 6 месяцев назад

Dude, love this idea! I just extended the "in-feed support" board a bit longer and shortened the L board to the end of the factor fence and it worked great! You're awesome man!!!

@vnvet2282 2 месяца назад

Have never had problems feeding longer boards, using one hand to push the board through the cut and another to push the board against the fence a comfortable distance in front of the blade. And I don't have an outfeed table. For longer boards or plywood, I just call the wife, my portable outfeed table. But an auxiliary fence is good since you can attach feather boards to keep the stock flat against the table past the blade. Having said that, I like your jig. Simple in design and construction, and functional - if you feel the need for the additional support. We all love jigs. With very limited space, my problem is where to store the things.

@wkbowser123 Год назад

Great Idea and thanks for just showing us how to use it. So many videos start to show how to build something without first showing what it does! Great to the point presentation!

@stephengee8488 9 месяцев назад

Excellent , as usual. This would help cutting large sheets of plywood too. You could switch out the front piece for a wider board to give more support. I think Izzy Swan also made a similar type of jig for infeed support.

@thepewplace1370 Год назад

I clicked on this thinking you were about to show me a table saw jointing jig and was happily surprised to see what it actually is. Great idea! I've got some 3/4 Baltic birch leftover from a recent sled build that may just be long enough to cut out something similar to this.

@jamesitube Год назад

Yup. When ripping longer lumber, I clamped a long lever down to the table and it was so much easier to push it through straight - but its real pain to clamp the lever down because (a) I need to get it straight and (b) because the geometry of the machine underneath makes it hard to use the clamps. So I thought that next time I'll need to just clamp a long thing to the fence somehow, and this is a really nice design of just that. Thank you.

@danieldoyle3625 Год назад

Great upgrade to a somewhat tricky situation. Thx!

@mikec2810 Год назад

Such an awesome jig! This solves my problem for my Dewalt 745! Thanks so much for this!

@lanemcook1 Месяц назад

I am glad there are creative woodworkers like you who can think in 3 dimensions!

@erickdanielsson6710 Год назад

Thank You... I just made this yesterday Oct 3, I found by waxing the surfaces that wood to be cut touches, I had a smooth cut. No dragging.

@brianfox2653 Год назад

Cool video! I made one of these a couple of months ago for my little 20 year old Craftsman jobsite saw. (Someday maybe I'll get something bigger...) Anyway, I used a 6 foot length of 1"x4", fence clamped it to my fence and screwed support pieces under it before and after, so it is an infeed AND outfeed support. It works great when I'm trying to knock the round-over off of 2"x4"s. I even used it to break down a partial sheet of plywood. It's definitely something to try. Just make sure the fence board is super straight so it is a good reference. As far as being able to use the measuring guide, it was never accurate - neither was the fence, so this actually helps to get my fence to register parallel to the blade quicker... Who knew? Thanks again! 🦊👍

@rogerwestgate4724 Год назад

I was thinking the same thing

@SteinerHaus Год назад

Sometimes it's the simple things that are just what you need. And this is one. I've been looking at in-feed and out-feed assists for a while and Voila! It works in a small shop like mine and doesn't eat up a lot of space!! Thanks

@geoffreymorgan8366 Год назад

brilliant, I have no extended out feed so building this with support both ends of a cut will make this work for those of us with less workshop space, beautiful.

@barryhamm3414 5 месяцев назад

Just finished building myself one of these using various pieces of scrap ply. I haven't actually put it to use as yet but preliminary testing shows that it will be a valuable addition to the shop. So that the edge won't wear over time I've added a piece of aluminium angle. Thanks for sharing a simple but brilliant idea to make life easier and safer.

@MikeTowers-hp1jb 5 месяцев назад

The aluminium angle is a great idea.

@broha6197 Год назад

Great idea. I purchased a couple of roller support stands for my thickness planer and they work great for the in and out feed sides of my table saw as well. My roller support stands have side guides to help with the alignment to the fence as well.

@anyfoolknowthat Год назад

I have them, but my feet always get tangled up- need to make a way to attach them to the saw instead of resting on the floor

@stevedawson4781 Год назад

Good idea. I had to rip some 5/4 x 10" x 10' maple. Heavy boards! I used 3 roller stands for the infeed. That way I could line up the board and stand close enough to the saw to guide it against the fence. This would have helped on that project.

@glpdrum 2 месяца назад

I have some feed stands that tilt and go level when you feed in or out depending on what you need. Been hauling those things around for over 20 years, I've looked for new ones but now all you find is rollers that are 8 to 10 inches wide. These are about 18 inches wide with a hard plastic slick top. I'll still use them for out feed but I gotta make this for sure, great idea! Thanks.

@worstuserever Год назад

Still rather a novice woodworker so thank you for helpful videos like this. You got me thinking - I've already cut long strips of plywood for an auxiliary fence that I intend to assemble into an offset box section for squareness and rigidity. I don't have room for a permanent saw island so, for in and out feed support, I plan to construct collapsible legs with some sort of drop-in cross member(s). I'll still go with this approach for large sheets, but your flush support extension would allow my DIY fence alone to control long narrower boards, where only the length is a problem. And yes, you're right that accessory projects like this often only require display of the finished item and discussion of its benefits, the construction being obvious (probably with customisation).

@FreddyJ120 Год назад

Great idea! Gets me thinking - that’s basically a ‘hardwood angle iron’. So, could angle iron be used to do this? Cheap, sturdy, relatively stiff, straight - you could bolt the wood support piece to the bottom to replicate what you did. Anyway, just riffing off your concept. Excellent - thank you!

@SenseyTagava 4 месяца назад

Brilliant and simple. Thank you very much for sharing

@gnlman Год назад

This is a fantastic simple solution. Thank you. Great idea.

@kerryvix1582 Год назад

That makes good sense . I’m about to do a project with 4 x8 plywood and this really will be an easy and great helper . Thank you .

@-ltdiy1652 Год назад

1:48 up to this point, I think what you are looking for are an adjustable roller stand and both horizontal and vertical feather boards.

@InspireWoodcraft Год назад

Nope. Just looking for a quick and easy solution that doesn't require buying anything or setting anything up.

@-ltdiy1652 Год назад

Right, why didn’t I think of looking for nice and free lumber left by someone in my basement first?

@johnkeedwell5549 Год назад

Yes. Simple yet inspirational. And comments ideas makes sense too. Thank you for sharing

@deanowright359 Год назад

Great idea . I'm new to wood working myself and this is a great idea as i dont have a steady hand as someone who has been doing this for years . I see guys rip a sheet of ply wood with no support. one day i will get there . but for now just want all my measurements to come out square and correct. thank you

@Phobophile Год назад

What a great idea! Especially for those of us using smaller table saws because we have space issues.

@watermain48 Год назад

What a great idea. Thanks for sharing it.

@fredschepers5149 8 месяцев назад

Not a woodworker at all. Just a 60 years old building a memorial. Bought a second hand sawtable a few months ago. Needed a new blade and I don't have any sliding bits to go with. Still tried to, well tried..🙄 to saw a length for the roof bit. It's not massive or so, but I need to saw a few bits. Put some wood on the table, wiggled a bit, fumbled some more and had the feeling that it's was not gonna work. Too much motion from where I stood.... Exactly as you said it at the beginning. Tried some things with metal rails etc, just didn't feel comfortable. Just not enough space for the material. Wanted to start tomorrow again but needed help. This is the first video I watched... I now know what to do first tommorow morning... Thank you....

@michaelbradford4444 Год назад

Simple, effective and because it is so simple it's useable! I'm shocked that I haven't seen this before and it will be my next jig to make and (use) when needed. Thanks again !!

@mikecozzi1040 5 месяцев назад

A great idea and well explained! Keep up the good work! Keep on producing shop videos and Thanks for Sharing!

@peterbertolini2749 Год назад

Simply brilliant. Can be easily modified to accommodate wider/longer boards. A really good idea.

@robertmowery3370 Год назад

Great idea. So simple. Please keep thinking.

@neilllester9226 Год назад

This is great! I love simple, but highly effective designs/solutions like this.

@tompackman4640 Год назад

That’s a Win! I have been looking for a way to add a little support for a couple sleds/jigs I use and this will be ideal. Thanks for sharing

@geneallevato5809 4 месяца назад

Love it - simple and practical. Thanks

@TransplantHelper 6 месяцев назад

That was excellent. I can’t tell you how many times I put an extension fence on my fence for that same purpose, but never thought to do the support on the side underneath the stock. This video was great.

@davidcurtis2593 Год назад

Very nice. A good featherboard setup would work as well. I recently added the Jessem TS stock guides and they are a game changer.

@smidtwarner Год назад

They are indeed game changers! I made all the door & window trim plus baseboard for my retirement house from MDF. Trim was 3 1/4” wide and baseboard 4 1/2” wide. It was over a dozen full 4’x8’ sheets. The JessEm TS guides were so helpful! I also purchased the JessEm router table guides. Since all the trim add 1/4”R on two corners, the route table guides simplified and improved the quality and consistency dramatically.

@jwmcneelyIII 7 месяцев назад

Great idea! This would obviously work with the outfeed side as well, if you don't have room or whatever for a fancy outfeed table. I'm definitely going to make one of these, thanks!

@martinoamello3017 7 месяцев назад

I have a personal rule of thumb for outfeed tables. Make it at least half the length of the longest pieces you expect to be ripping. It gives you the advantage of gravity to avoid the piece tipping off the edge and meeting hard concrete..