How I Painted My Airplane...From Start to Finish

Подписаться 2 тыс.

Просмотров 12 тыс.

50% 1

In this video I'm going to show you the entire step-by-step process I used to paint the Blue Angels Cruzer. I will demonstrate every step by painting the elevator. Keep in mind that first, I am not a professional painter, and two, there are many ways to do the same thing. And in this video I am just showing you how I chose to go about the process of painting. I am using DuPont Nason single stage paint. The color is "Blue Angels Blue".
While you're here, please take a moment to 'like' the video and to subscribe to the channel. Your comments and 'likes' really help the RU-vid algorithm to promote and grow this channel. Thank you!
#kitplane #aircraftpainting #experimental

Хобби

Опубликовано:

14 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@foesfly3047 7 месяцев назад

Your fiberglass wire cover looks great. That was an excellent idea and executed perfectly ♠️

@Fader951 8 дней назад

Use lower pressure to reduse “paint dust” or dryness

@spyrosg3172 4 года назад

Nice and thorough description, thanks!

@franciscovallejo5255 2 года назад

Hi mate!!! Amazing job, thanks for your helps. Which type of paint did you used? Epoxy? Polyurethane? The lacquer is in the same paint right?

@gr8trgoodsimpatico310 3 года назад

From a painters stand point. That used to paint gulfstreams. Did a pretty decent job. What I would suggest is use a acid etch primer. From Sherwin Williams, ppg or exalta. Before the epoxy. Runs about $50 a gallon right now. Aluminum is such a hit or miss with paint sticking. Some you couldn’t beat off with a hammer just sanding. And others will flake off in big sheets. As for dust good luck. It comes from everything around or above the part and gun. Remember when you release compressed air in a direction. It creates a vacuum. Behind it.

@MajikPPMan 2 года назад

I figured he would do the etching with diluted acid then a coating of alodine before priming I've had great results adding those steps.

@gr8trgoodsimpatico310 2 года назад

@@MajikPPMan I’ve done the alodine on leading edge parts. It works really well. Other than those just acid etch primer. And move along. That’s what they make it for.