How to 3D Print with Cura over USB! - Beginner's Guide

Подписаться 33 тыс.

Просмотров 380 тыс.

50% 1

Download Cura:
bit.ly/2xqvRB2
Learn how to slice 3D models in Cura:
• [Updated] The Ultimate...
Have you been wondering how to 3D print with the Cura 4.0 slicer over a USB cable? This video covers how to setup a print and control the printer manually over a USB cable. In addition, some helpful tips and tricks are given throughout.
Join the community discord:
3dnow.cc/discord
Awesome 3D Printers:
~$180 Creality3D Ender-3: bit.ly/2M0WaDK
~$360 Creality3D CR-10: bit.ly/2Aq7O9B
~$430 Creality3D CR-10S: bit.ly/2K8lBBu
~$390 Creality3D CR-10 Mini: bit.ly/2mXnc41
~$325 Tevo Tornado: bit.ly/2v37glc
~$250 Zonestar Dual: bit.ly/2LDjqLU
~$190 Tevo Tarantula: bit.ly/2OwD5L1
~$180 Alfawise U30: bit.ly/2StljtR
Follow me on Instagram - / 3d.now
Follow me on Twitter - / 3dnowprinting
Subscribe to get notified when I post a new video! bit.ly/2LQabXK
/ 3dnow
Music: 'Great Days' by Joakim Karud - / joakimkarud

Наука

Опубликовано:

11 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 294

@3DNow 4 года назад

Check out my Cura Tutorial for beginners! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eUNTlb5pEWA.html

@Yatukih_001 4 года назад

Thank you!

@tecnoturd 3 года назад

What kind of USB cable does the CR10S use?

@nasalimbu3078 3 года назад

Ms vortex w25

@connorlancaster7541 2 года назад

Ask Holy Spirit to teach you and to guide you. I would recommend the RU-vid Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey. Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).k

@jeffmilkey 4 года назад

Thanks...very clear and concise. I was connected and printing as soon as you told me I would have the option to print over USB or Save!!!! Keep up the great work.

@gregorystillhasntvented7069 Год назад

As a beginner for 3d printing this video help me by so much! Thank you for being simple and straight forward I couldn’t have asked for a better tutorial thank you!😁

@richardspehr563 2 года назад

Thank you for this video. I set up my Ender 5 Pro and used Creality Slicer 4.8. Your video taught me how to install and use everything. Thank You!

@johnnyswfour3392 3 года назад

Brilliant vid. Thank you so much. Everything is up and running now (Windows10, Cura 4.7.1).

@MTN_008 3 года назад

Thank you very much and I appreciate your work. How do I add the play button And that I'll see where the nozzle is at any moment in cura?

@gripstsermastermind480 3 года назад

Hey man thanks for sharing this video I had already figured out how to print successfully from the test prints and with your help I am now currently printing something from my laptop it is awesome thank you so much and 3D print until you run out of filament

@connorlancaster7541 2 года назад

@taherrahyoung4096 Год назад

I teach middle school SmartLab and I am new to 3D printers but have wanted to learn for a time now. I did all the steps but could not figure out how to print USB your video was very detailed thank you.

@stevenhyde7277 2 года назад

Hi 3D Now, followed these steps & found it so easy to setup my Vyper printer to use via USB & to learn how to use Cura a little easier, thank you so very much..regards...(Steve..

@CT393 3 года назад

Any idea if you can connect to cura for linux with an Ender 3?

@kareninch1 3 года назад

Hi love your video followed all your instructions but then didnt print anything is there something i did wrong or something i need to press to start print

@rosebarrette6292 3 года назад

I loved your video, this really helps with using the USB cable with my printer.

@edn3052 4 года назад

Can someone tell me what type of head is on that USB cable at the printer? Is it a mini b

@miaoumiouRC 3 года назад

hello super video is it possible to turn off the pc to sleep at night and resume printing during the day when the printer is stopped? Thank you for your reply !

@gregoryfox1883 2 года назад

Hey! I have plugged in my printer to my computer but cura is telling me to connect my printer still? Have I missed something? Thanks.

@strangeman4200 3 месяца назад

same

@AngelVazquez-wx7pj Месяц назад

Same

@maximum94 2 года назад

Can you get a live visualisation of the print as it’s printing? So you can say watch it on a second monitor?

@seanzhang3873 4 года назад

Is there any way I can change my port manually, cuz my printer DO NOT shows up when I plug it in my laptop. It works with an older version of Cura however as I can manually select my com ports.

@THEINFOMEDIA 3 года назад

we use ender 3 pro and cura. With the use of a USB cable, we connect ender 3 pro to PC. But in cura that is not connected. what is the extra setting we gonna do for this?

@philr3630 3 года назад

You mentioned that little things that could turn off the connected computer would force the print via cura to stop. I just got a new printer so that I could use Cura rather than my XYZ model which used its own slicer. Should the computer priting printing with Cura not also be used to print to the XYZ? Ie I load a long job to the Cura / Ender 5+ and while I wait use the same computer to print to the XYZ printer also attached by a separate USB? Have plenty of memory and disc space. EX Can I run them in parallel?

@brauliomanuel3164 4 года назад

much better than the creality tutorial, thank you!!

@jamesdetter2088 2 года назад

Thanks for your video. I'm new to 3d printing and it was a great help!!

@dustapatalino Год назад

Thanks Bro!!! I could not find how to do it with the Crealty Slicer Software, but now I finally did it with the Ultimaker Cura. Nice tutorial!!!

@LifeWithStiel 3 года назад

I want to buy the monoprice select v2 and i have a macbook. Can i do this?

@poteregreco7048 3 года назад

Hi!i have a question when im starting printing some models (founded on the internet) my print starts but its like can't melt the filament.When I have to print some models which are in micro SD(like dog,cat,pig) the models are perfect,what im doing wrong?(sorry for my english)

@DJahop 3 года назад

Cura doesn't seem to recognize the printer on my mac. Also, when I leave the usb plugged in while the printer's off, then I turn it on, it sounds like a car alarm coming from the board.

@ahmedaljohaniycat1798 3 года назад

i have the same issue ... if you find out the solution help me with that ,, best regards

@tanoshi4300 3 года назад

@@ahmedaljohaniycat1798 the car alarm noise happens when something is going wrong and you need to unplug the printer fast

@Dan-hw2je 4 года назад

I'd like to use cura with my tronxy but usb will not connect works on repetier when I plug in

@tayfun11100 4 месяца назад

can I change or in/out material to ultimaker 2 with this methot too?

@maxdublas Год назад

i've got an Anet A8, i installed the driver, bought a new USB cable, whne i connect the printer it shows the driver on com and ports on the device manager, but the printer shows as not connected on cura or repetier (i tried the latter as well, to make sure it was not only the cura), what more can i do or need to do to connect the printer via USB cable.

@julieumansky5810 2 года назад

hello. Can you explain what type of USB cord to buy because my Ender3V2 did not come with a USB cord. Only the power cord. Thx

@renderuthis 3 года назад

I want to save the file on the sd that is in the printer. I do not want to plug and unplug the sd card but I do not want to leave my computer on also.

@inventorbrothers7053 3 года назад

Exactly what I was looking for! Thanks!

@kikintt 2 года назад

Nice tutorial!! I have a question there is a way to control setting while is printing via USB? Thanks

@emmanouildrosopoulos7894 2 года назад

on my cura the printhead settings are diffrent from yours ( X min -20 and Y min -10) are ok ? the rest are ok i use reprap

@zeradgamer2401 4 года назад

Does the ender 3 come stock like that or do I need to buy an extension?

@atchenlures 3 года назад

hello, I have the Wanhao Duplicator i3, and I can not do what you are doing with USB, is like is not recognised the USB cable; because the SD card I think is not giving the sufficient Watt to the SD and USB port? what do you thing, any suggest?? thank you.

@4kclips358 Год назад

is there any way to do this with custom added printers?

@birkandemir2355 2 года назад

How did you turn off the hot end fan? what is its purpose?

@krafterk8682 3 года назад

Thank you. i needed this

@barbatos5066 Год назад

Will it work with USB and SD card both plug in to the Ender 3? Can you save to SD card connected to Printer from PC?

@Raygoful 3 года назад

Thanks a lot man, you have saved me. I will follow you.

@UNgineering 4 года назад

how did you get the printer to show up? When I go to Monitor tab - it shows nothing

@gilangrr21 3 года назад

I might be late, but someone will find it useful since he didn't mention about driver, install the driver from here, worked for my ender 3 v2. support.th3dstudio.com/hc/downloads/drivers/ch340-drivers-th3d-uno-creality-v1-1-x-v4-2-x-board/

@mynameisneb 3 года назад

@@gilangrr21 THANK YOU!!!!

@ChronosCooper 3 года назад

@@gilangrr21 Thanks dude. I can confirm it worked for Ender 3 Pro

@charliegoodman8626 2 года назад

UNgineering, I Have The Same Problem, My 3D Printer Is Hand Built, Useing The Best Of The Best Parts and I'm Having The Same Problem!!

@landinblackmore5336 2 года назад

@@ChronosCooper what did they say????

@asiercorderoac 22 дня назад

How con I control de extrude motor in cura?

@takiparilimpossivel 3 года назад

You can't monitor with Cura printing from the microsd?

@WalterAluasHeisenberg 2 года назад

Must be the compruter running while printing? thanks.

@theloneviking9145 Год назад

So if I connect my laptop to the 3-D printer I pretty much cannot use the laptop for anything while it is printing? If that's the case I would probably just rely on the flash card just above it any mishap.

@BENJI_LOUIS 2 года назад

do you have to be signed in to go to moniter?

@intelligenceservices 3 года назад

i can jog and preheat, which is amazing, but nothing happens when i push "print via usb" -- I'm using a TronXY x8 with the CH341SER driver.

@jdo62 Год назад

Is that a micro USB that was plugged into your 3D printer? Is this an option for the CR-6 SE?

@MiriamTV2 Год назад

Thanks for an easy-to-understand video! Since it's been a couple of years, would you say the feature has gotten better?

@marshal7102 9 месяцев назад

I have tried to print via usb on my SUNLU S8 printer but it will start out good then it will just randomly pause for a few moments then start back up leaving a puddle of filament at that spot. Sometimes it will just stop all together I have tried every setting as far as baud rate and made sure that it was set for the proper speed but no luck. I have tried it with Repetier Host as well as Cura. Tried new USB cables and all but no luck. Will only complete the print via SD card with no problems. Can't find any topics about this problem. What do you think?

@Preyhawk81 3 года назад

Should the internet be disconnectet? because i had problems of print abortion. I think its when windows searches for updates or the graphic drivers.

@redroyal4287 3 года назад

wont' conect. how do I specify the COM port?

@davidchaconalejandroalvare6531 5 месяцев назад

Ya conecte mi impresora 3d a la computadora pero no la reconoce, que puedo hacer para que la reconosca

@TwitcyTrain Год назад

Thx. I misplaced by little thumb drive with the Micro SD so until I get a new one I was trying to print via usb

@carteo7008 3 года назад

i have the latest update but your cura looks very different from mine and my printer won't connect when i plug it in

@georgespapillon364 2 года назад

Hi, I have a Creality CR6 Max and I am triying to connect my printer to my computer with a USB ? mini USB cable. I did everything you said, but in Cura, under the monitor tab, it dosent show that am connected like you (/dev/cu.usbserial- etc...) I have nothing showing. I checked in my device manager, and it shows that the driver CH340 is connected in port 5 Anny other information I must have to make it work ?

@WCC209 Год назад

This was really helpful for me today.

@boltvalley3076 Год назад

Hello boss what how to solve print setup disable

@jackring406 3 года назад

Why dose my printer print the same thing again and again I don’t know why but maybe It’s the tf card that I need help with please tell me how to store 3d models in the card so it prints it

@John-gm8ty 7 месяцев назад

This was the video I needed I could not see how to work this bah. Thnak you.

@renderuthis 2 года назад

Mine is not working well. there seems to be so little control. I think it only likes its own slicer. it brings in my STL and its the wrong size, but other software gets it right. on sd card I get 2 icons for each file and its not changing pages/I can only see part of the folder. options are greyed out in software, monitor page. I have used it successfully but after running 8 hours yesterday it is buggy today. It was a little buggy yesterday. I put the gcode in the fokoos slicer and it only per heats to 200 not 215. ... finally it is working but I did nothing to fix it. I was going to reflash the board. That took 3 hours. I wounder what board is in it?

@Blue_3is Год назад

I copied your print setting in this video but when I slice it shows 01:35 as my print time estimate, how are you saving half an hour???

@germanmendozarevilla719 4 года назад

Thank you so much ! I needed to start printing some facial protectors for my Hospital ( Spain ) and my SD card reader was not working.

@whywouldyoucareaboutmyname6610 2 года назад

Lemme guess.. they didn't take them because there was no way to prove they were printed in a sterile environment? Or is Spain hurting that bad? Lol. "Sure, we will take these potentially covid-infected items and strap them to our faces!"🤣🤣🤣

@rogerstimson1414 Год назад

Can you help me I'm trying to connect my 3D printer my vector 3 3d my PC I do not know how to do it every way I've gone through to do it on the manuals will not let me get onto the site to download the software if you can help me please I'll be very grateful

@tecnoturd 3 года назад

What type of USB cable does it use

@poolcare4400 3 года назад

where can i get that wire?

@paulbeddows6014 Год назад

Good to know as my touch screen on my tenlog tl d3 Pro stopped working so at least can still use the printer until new screen arrives thanks

@fadelfarae6019 Год назад

Some one help please for some reason my 3d printer connect through USB connection but then printer doesn't work when i try to control it from the PC and the build plate tmeoture control doesn't show eather

@tiny5214 2 года назад

Can you use g code to turn the printer off and on

@jimmyneutron8702 2 года назад

I never get the screen on “monitor” tab, so it does work. Pleaee help me. The canle fits, the computer does tge “dun duh da dun” so i know it’s recognizing something is being plugged in, and the printers motherboard is being powered by it because the lights turn on, so what’s wrong?

@HogwartsGoth 2 года назад

Can this usb only run from the PC? Can it run from a Memory Stick?

@thelimike 2 года назад

This is a perfect video,thank you very much…

@dwill5890 2 года назад

Thanks!!!! This video helped. 😀

@mauriziovetere1956 3 года назад

Hello, is there anyway to preview the print like in slicer mode but with the nozzle moving around actuating the current gcode command? I discovered it in Gcodeprintr on Android but I can't seem to find any way to do the same on pc

@dr.eckigtv7937 2 года назад

Just watch the video at 6:30min for like 15 seconds.

@JeffRozanVideos 4 года назад

what if you have multiple printers hooked up

@squidboirulez3581 3 года назад

Thanks for the tutorial. I have a question about the system. When I finish slicing the model it doesn't show print via USB it only show save to file and preview. What can I do to fix this?

@MelaLabelle 2 года назад

You ever figure out the issue?

@raynaudcampo7139 2 года назад

@@MelaLabelle click on the little hook in the corner next to save to file

@MrMyutubechannel 2 года назад

Is it possible to monitor what layer you are on this way? Like the preview, except in real-time?

@valentinafernandez9900 2 года назад

I have the same question, did you find the answer to this?

@umangpanchal6811 3 года назад

Thanks for the help.

@themeparkcreator4416 2 года назад

Can u use a HDMI cable

@juniorshbr13 3 года назад

Thanks for the videos. I am an infant in the 3 d world. I keep trying to connect my pc using win 10 on 3 v2 but it keeps telling me something like comm error. I can get a screen shot for you if requested no problem. I hope you are able to help. I am not a forums kind of guy. Thanks again

@failedlikes7219 2 года назад

When I connect the usb cable to the printer the monitor tab still say to connect a printer,why?

@RBurwell 3 года назад

Thanks for the tutorial but I really don't see the point in the monitor. What's the point in it?

@delacosta85 Месяц назад

I'd like to know everything else you had to install before being able to run over USB. Like OpenSCAD...

@thetoxmedia4807 3 года назад

anyone else have a anet a8? for some reason in the monitor section nothing is popping up anyone know why?

@fx_masterwe8251 6 месяцев назад

I use an up plus 2, but it doesn't show up when connected through usb...

@mrpro5219 2 года назад

Excellent work 👏 👍 👌

@avs1230 2 года назад

The "options" do not show up for my CR-6-SE someone help. PLEASE

@TuckerGibsonLegendary 2 года назад

I plugged my printer into my computer and once I turned the printer on there was a POP and FLASH! Now the screen just shows the backlight and nothing else... :( Did I do something wrong? Or do I have a faulty mainboard?

@danielhiemstra3834 4 года назад

so is there a way to see a live animation of gow far the print is?

@3DNow 4 года назад

It will show you the percentage complete and time elapsed.

@GonerBye 2 года назад

Where to get the cable?

@NTfishingadventures 2 года назад

Thank you, my creakily friend 10 mini had sd reader problems and I did not print for 4 months thinking I had to buy a motherboard.

@ssweat 2 года назад

coming from matter control i am disappointed there is no real time print monitoring in cura.. in matter control you can see it printing layer by layer via usb.. i dont want to change sd cards all the time though wish there was a way to save to sd while its in the control box already

@jacobwallace9651 9 месяцев назад

thank you so much

@Astro_Preston001 2 года назад

Ok so I’m like very very new like I just got it and I want to know how did u connect the usb to your computer to ender 3

@Astro_Preston001 2 года назад

like i dont even have the printer yet

@ravisubramani6275 Год назад

What is usb cable type?

@Supernova54611 3 года назад

Got a question, what kind of cord did you use to connect your computer to the 3D printer?

@razvan-sorindumitru719 2 года назад

It's usually provided with the printer. For ender 3 it's a micro usb, you can check around the printer and see what kind of port you have and then get the cable if you don't have it.

@WyattH 2 года назад

@@razvan-sorindumitru719 it’s actually mini usb

@ketchupseedhd4861 3 года назад

what if the printer wont pop up in monitor?

@ZebraTubeVideos 2 года назад

Nothing I have done will let Cura monitor my Snapmaker A350. I can transfer files, but when select “Monitor”, it’s showing the printer isn’t connected. Neither USB connection nor wireless shows me connected. Searching doesn’t find it. Have downloaded the correct driver. No change. Any Ideas? Anyone?

@TheATWcorp 4 года назад

why dose the ender 5 pro not reconized by anything not my mac or windows or octoprint i cant get it to connect to anything

@danielhiemstra3834 4 года назад

maybe bad cable that was my problem

@sovideo_ 4 года назад

Cura is supposed to give you complex help in your 3d manufacturing (millions of settings). However I too advise against printing via USB. Firstly it hijack the inner software of your printer. This way my CR-10s just wasn't able to sense the missing filament. Feeding new filament for a model in progress (after pausing), resumed the printing with 1 mm offset on Y axis. Using the jog option in Cura, did move the bed by 1 mm, but the printing remained offset, ruining the thing. Printing from Cura brings no advantage, but only disadvantages. Did I mention that Cura tried to start a support in the air (while slicing)? No good analyst seems to be involved in the development of Cura even if it is version 4.4.1 (actually version 15.04.6 +++)