[Updated] The Ultimate Beginner's Guide to Cura Slicer!

Подписаться 33 тыс.

Просмотров 198 тыс.

50% 1

►Join the community discord:
3dnow.cc/discord
In this video, Jack goes over Cura Slicer for absolute beginners. He covers the software's user interface, the settings, and how to slice a 3d model from scratch.
Download Cura:
ultimaker.com/software/ultima...
________________________________________________
AWESOME 3D PRINTING PRODUCTS (Affiliate Links):
________________________________________________
Gearbest: bit.ly/39DKUYE
FilamentOne: bit.ly/2R70qWD
Slice Engineering: bit.ly/39ELENt
________________________________________________
MORE 3D NOW CONTENT:
►Visit my website: 3dnow.tech
►Visit my merch store: 3dnow.cc/store
►Follow me on Instagram - / 3d.now
►Follow me on Twitter - / 3dnowprinting
CREDITS:
Music: 'Low Rider' by Joakim Karud - / joakimkarud
Intro/Outro by Disaray - iiiharezz39.wixsite.com/disaray

Наука

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@BeezleGaming74 2 года назад

What an amazing beginners guide to printing. i have the Ender 3 Pro V2 and you have made it so much easier for me to understand as have watched a couple of videos but yours has been the best. I so much look forward to many more video installments to help beginners and discuss other different aspect of Ultimaker Cura. Thanks again and take care

@legofilms7902 3 года назад

You just got another subscriber, unlike so many other people you break each thing down so that we know what it does and why it helps!

@execjet1 3 года назад

Great tutorial video!!! Nice job!!! You just answered many questions that I have been asking. This has been the best 24 minutes in my newbie #D printer experience. I have only done the test prints and struggled to get information to be able to print from computer to printer.

@eazyonewiththeforce 2 года назад

Literally watching all of your videos. Thank you for all your hard work

@jameshilton9477 2 года назад

Excellent guide to using Cura, having just purchased my first 3D printer a week ago this tutorial has helped massively on my path to perfect print. Thank you

@ebonyblack4563 3 года назад

This has been the best Cura guide I've watched so far, very through, well explained, and nicely paced.

@braethorn 2 года назад

Helped me all the way through my first project. Great video man, thank you!

@wolffin100 3 года назад

Very well done 👏 I have been printing for over a year and still found this informative and well detailed, thanks 💪💪👍👍

@devilsadvocate1218 Год назад

Finally, someone who can explain Cura to me in terms I can understand. You have a new subscriber

@grahamhobson2875 3 года назад

Thank you very much for your time & effort putting this video together; it is appreciated with the help & advice given.

@amandarudack9529 3 года назад

This is a great overview for someone (meaning me) who knows nothing about Cura. Clearly explained and easy to follow.

@nicoli54 Год назад

Amazing begginer tutorial, you help me a lot! Easy to understand, direct and full of information. Thanks

@bhrissteezy47 3 года назад

Was gifted a 3D printer, binge watching your channel is helping me a lot. Very excited

@biglebowskee 3 года назад

Great into video to Cura. Well done. I would recommend this to anyone that is interested in learning this software package.

@antd6738 3 года назад

Very nice beginner tutorial. Thanks.

@hannesdobbelaere Год назад

just getting started with 3D printing. i added this video as bookmark, i'll be watching this one a few more times. thanks for this one (y)

@makhdimukhambetov4913 2 года назад

I am very new to 3D printing and it helped a lot and I watched like 30 vids and this is best so far

@TheRealStructurer 2 года назад

I'm doing my homework for my first 3D printer and this answered a lot of my questions! Will have a look at your other videos as well. Cheers!

@It-b-Blair 2 года назад

Same boat 👍👍🥳

@KyleenSmith Год назад

wonderful guide! Thank you for sharing!

@Alta1r135 Год назад

Best cura guide i helped me so much

@vanhelzer22 Год назад

Thank you for your time! Great video👍🏼

@raymondlewis2055 2 года назад

Excellent! Thank you for this video!

@gibsonav 3 года назад

I will be sure to share this video link in all the reddit 3D printing groups I'm in :) Well done

@daft9816 3 года назад

redditor moment

@dougd8548 2 года назад

Man what a great video for starting for us beginners

@Junscorolla Год назад

Amazing beginners guide just started with ender 3 . Thank you

@bigmaw369 Год назад

Awesome video just what I needed thank you.

@BrewCityMadman Год назад

Very well done !!

@bobprentiss8215 4 месяца назад

Great video, for this newbie.

@michaelcooper5490 3 года назад

Thank you sir I appreciate your work.

@badtoro Год назад

TY for this video. It helped out this newby

@VernRobinson 3 года назад

great video thx for the help!

@robertc1949 Год назад

Wow, great video, I am new at 3D printing and thank God for my tech guy - my 16 year old Grandson. I have a FlashForge Guider II and have a long way to go. My issue at this point is the stringing, we shall see... I am going to download the Cura Slicer now, thanks, Bob

@razor420100 3 года назад

Thanks for video. I have an Ender 3 V2, I did not see any option for this version so added Ender 3 settings, I had to change the printer dimensions. Wondering if there is anything else I need to change.

@hadarhe 3 года назад

great video! Really well explained. thank you

@ewanyork 3 года назад

Very much appreciated - thanks so much for this video!

@philgarver1241 2 года назад

Great video, very informative, thank you. If I'm using a Creality Ender 3 Pro for printing, what file format am I saving out to after I've sliced the model in Cura? Thank you.

@prophead62 Год назад

Your presentation is excellent. Easy to follow along with. I have a printer that i'm building on my own. I'm using an SKR V2 board from BigTreeTech. My question is, what printer selection would you make when adding a printer? I tried the Creality CR-10. Im getting a weird behavior: The Nozzle primes ok and spits out some filament, but shortly thereafter, the extruder retracts the filament with each command. I'm trying to print the infamous boat for my first attempt. I have not modified the sliced code in any way.

@gameframehd7895 3 года назад

Thanks for the help

@steevesmith1573 2 года назад

In my desktop is shift+Left mouse click for Pan arround thanks for the advise

@FilipeCamargo 2 года назад

Thanks!

@frankietruth3292 Год назад

very good video

@akanten 2 года назад

Thank you!

@bachconneshon7809 3 года назад

thank you finally someone that can actually explain. goddamn

@benjaminkaperday471 Год назад

i think ill get my printer sometime in the future and i never used a 3d printer and i am getting one for my engineering class but also for fun i will be getting an flsun super racer which is a delta style printer i was wondering if there are global settings that every print can use or if i will have to figure out every time i print as a rookie i will have limited time and limited mats so i dont want to wasre mats that i cant afford just general questions not looking for any super complex answer anything helps

@ashtoncos6815 3 года назад

Nice vid

@rikvantiggel9207 3 года назад

I downloaded the Cura 4.8 but I can only select Ultimaker printers. I cannot find a way to set-up other printers ?

@kellyvb9881 3 года назад

So, I have an Ender 5, it has the same x and y but z is 300. I have it set to 220 x and y. I cant print anything larger than 200. Are you saying I should set it at 235?

@michaelortiz8365 2 года назад

Thank you so very much. You did exactly what I was looking for a step-by-step tutorial! You also did an outstanding job and laying it out and presenting everything. I am new to 3-D printing I just got my 3-D printer a couple of days ago and I was a little skeptical at first until I saw your videos. Thank you again and please keep up the outstanding work for those of us that are just starting to hobby.

@DMAbCD Год назад

I am looking at getting into 3D printing. Thank you for sharing this awesome and very informative video. I look forward to seeing more of your video's to learn more about 3D printing.

@TheBestUni Год назад

Thank you

@anthonyrickardii6198 Год назад

Awesome and well informed. Question, why when I’m done slicing and checking preview it only last for a second? But it’s says 1hr and 30min but previewing it only did it in seconds? Does that count?

@paulbrown5596 3 года назад

can you change to inches instead of mm?

@fuqorock 3 года назад

this cura can make support for resin printing?

@josephrusso87 3 года назад

Whenever I use cura my printer goes out of bounds, ie off the plate?? Does anybody know why?

@slawekh7862 3 года назад

hi. can you tell me what graphic card do you have? I have got a problem with dispay models in cura.

@alpharaccoon4140 Год назад

is it a problem if cura doesnt have my printer ? ender 3 neo i use a printer with the same build plate size

@andrefouche8725 Год назад

And another subscriber.

@unknowngenius6417 Год назад

Where did you downloaded that boat

@thorfriis6284 3 года назад

Question: I'm using Ubuntu Linux but I can't rotate the model at all. Is this particular to Linux?

@kempusmaximusdesimus9015 Год назад

I have a question after slicing I don't get save to file but save to disk instead what do I do

@MOE13576 2 года назад

Why does everytime I try to print something after using cura slicer, I have problems with the item sticking(1st layer). But when I print items from the sd card(that came with the printer). I don't have problems.

@carbole8751 3 года назад

Why my 3d printer print half print. I don't understand can you tell me. I am using anet et4 pro printer

@rickherrin5364 3 года назад

I hate to bother but I have a problem with Cura. I tried using v4.71 awhile back and couldn't use it. Now I'm trying 4.8. The problem is Cura will open but when I click on the folder to import a .stl the program flashes "file explorer" and shuts down. I can't find help on Cura website.

@Noyrt1 Год назад

how do you import a model and have it be the exact same size at the model you created. When I import a model it is either super tiny.... and I have to go back to my cad drawing and measure it again and scale best i can to that measure.... ( royal pain in the A**) or it will autoscale and be huge when I open it.. So just WTF on how to create a model in CAD, and import the STL and have it just be the same damn size. Any help appreciated! total beginner here.. Lastly are there any good instruction manuals for these printers on how to operate the controller on the printer. The book that came with it sucks. I got a CR10 Smart Pro... Just fumbling around trying to figure out how to load the plastic, etc.. Doesn't really tell you how to heat it up to do that. Again, just WTF..

@loopyfrog. Год назад

How do I print?

@perrykappetein9685 3 года назад

I am new to this. do you need to use Cura in order to create the files? I have some example files in STL format. but when i process in cura, I end up with some Gcode files. Do I need them both, or just the STL or Gcode file ? Thank you

@klausrolland4121 3 года назад

The stl file is the source - the object you want to print. Cura generates a gcode file from it which the printer understands

@Y.H.3. 3 года назад

Hey I have a question my 3d printer won't let me print any gcodes at all I sliced it and it only says it will go around the ring of the top of the ship please help

@Jacobinks 3 года назад

Inch’s would be impractical however you use a converter on google or something?

@teearr9120 3 года назад

Thank you, I'm new to 3D printing. How would I get this program to work with MY printer? I have the Flashforge Finder and it is not listed in the printers list in the program.

@3DNow 3 года назад

You have to add the 'custom printer' option in the add printers window. Then input your printer's bed size, print area height, heated bed, filament size, number of extruders, etc.

@snarkfinder2621 3 года назад

Try to find a 3D printer that looks like yours and has similar attributes. If that is listed in Cura, you may be able to away with that. Irv of Dr. Vax shows how to customise your code to get starting ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9Ja9utWCKWA.html

@1937Brett Год назад

Why does my printer reset each time I turn off and on

@TheFlamingEyeball 3 года назад

So what software (free) would I use to design my potential parts?

@tootaashraf1 2 года назад

tinkercad

@Sixteen14 8 месяцев назад

What comes after

@ljaklji9443 3 года назад

sorry, but I have an ender 3 pro, and the print won't stick to the magnetic plate. Can you help me?

@3DNow 3 года назад

Check out this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vvp8whpRkw4.html

@MrSneakyGunz 3 года назад

👍

@macewindow149 2 года назад

Mine keeps crashing on preview

@jennyk1198 2 года назад

I bought my ender 3 pro today and this isn’t very complicated

@repps1173 3 года назад

Im looking to get a 3d printer and was wondering Is this the best slicer program, Or is it Simplify3d? Thank you. Great video!!!

@snarkfinder2621 3 года назад

Both have their pros and cons. Simplyfi3D is commercial software you have to pay for. Cura is free. There are other free slicers around such as Prusa Slicer and Slic3r. However, I would suggest you use Cura as there are more support videos on RU-vid to get you going.

@thedashizel 3 года назад

i have cura 4.8.0 and i cannot see the nozzle animation in preview as well as the play button/bar at the bottom, any help with this would be great.

@Cons2911 Год назад

Wait wait, I’m new, but is that accurate? 5hrs?

@iconoclad 2 года назад

Following this video's recommendation I just installed Cura on my W7 system. It will not execute, it just comes up with a bunch of Python errors. After thirty plus years of messing with sucky software installations I don't bother troubleshooting any more. If it crashes after installation I just delete it and look for something that doesn't. It's a shame as Cura seems to hold out a lot of promise.