How To Balance Motorcycle Tires With Static Wheel Balancer

Подписаться 2,5 тыс.

Просмотров 14 тыс.

50% 1

How to balance motorcycle wheels/tires with a static wheel balancer.
**SEE DISCLAIMER AT BOTTOM OF DESCRIPTION PAGE**
Motion Pro balancer:
www.motionpro.com/product/08-...
BikeMaster balancer:
bikemaster.com/bikemaster-whe...
Motion Pro wheel weights:
www.motionpro.com/c/wheel-wei...
DISCLAIMER:
Due to factors beyond the control of Nick Buchanan Racing, I cannot guarantee against improper use
of this information. Nick Buchanan Racing assumes no liability for any property damage, injury, or death incurred as a
result of the information in this video. Use the information in this video at your own risk. Nick Buchanan Racing makes
no guarantee of any particular result that can be achieved using the information in this video. Nick Buchanan Racing
recommends taking all necessary safety precautions when working on motorcycles, working with tools, and operating motorcycles.
Nick Buchanan Racing recommends following all manufacturers recommendations and local laws. Any damages, personal injury,
or death, as the result of the information contained in this video is the sole responsibility or the user, and not of
Nick Buchanan Racing. I am not an expert technician or qualified instructor of any kind.
This video is for entertainment purposes only.

Авто/Мото

Опубликовано:

6 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@viktorask Год назад

I read we need put weights on both sides equally. Mine has on one side, but I read is to put on boths sides.

@ducatimale Год назад

Nicely put together video. Well done and thanks for sharing!

@nickbuchananracing Год назад

thanks.

@dougfresh1341 Год назад

Nicely done.

@nickbuchananracing Год назад

Why thank you

@johnnynewburgh9745 2 года назад

Nice job thank you

@nickbuchananracing 2 года назад

youre welcome. thanks for watching

@solosportbikerider5734 9 месяцев назад

Very good 👍

@nickbuchananracing 9 месяцев назад

Thanks

@martinhauk1852 2 года назад

Instead of cutting the weight in half you can spread the weights apart on the rim. This will average the effect of the weights and bring the wheel in balance.

@nickbuchananracing 2 года назад

never tried it that way. nice. you can also buy 1/8 oz weights, but I only had 1/4 oz...

@martinhauk1852 2 года назад

@@nickbuchananracing I learned that when I had to balance a wheel on my road bike and I only had 2 of the same weights. 1 wasn't enough and 2 were too many. I spread them apart on opposite sides of the light spot and with a little T & E, I got it balanced.

@bryanconoverjr8233 Месяц назад

That's called counter balancing you don't want to do that

@danielnegri2993 Год назад

Awesome 👌

@nickbuchananracing Год назад

Thanks

@nickaxe771 Год назад

Very good.....going to balance the spoked wheels on my 2020 Triumph T100. Balance is a bit out since I fitted tyre pressure sensors on my wheel valves they weigh 10grams. I dont under stand what the outer lock collars are for on these ballencers....the one at the rear of the cone. Also my cones done seem to be perfectly centered.....wonder how I will go on with that. Nick in the UK.

@nickbuchananracing Год назад

Think the extra locks are just redundant. If the cones arent centered that might be the fault of a bad part. This one is Bikemaster...its so so...not the best but pretty well made.

@TheMasterkiller24 2 месяца назад

Nice video..... What do you think of beed weights???

@nickbuchananracing 2 месяца назад

I dont use them. Nothing against them, just always liked the stick on weights but I also always tape mine. My best recommendation, is get smaller sized weights than I did. 1/8 oz weight make it easy to find the sweet spot.

@N269 Год назад

And, you should chuck those cheap valve caps... use proper ones with o'rings (metal or Schrader Pacific plastic.)

@r.williamcomm7693 16 дней назад

I want to buy one of these but the reviews on some complain about the “cones” being machined poorly or the steel rod not being straight. For the ones to which you link have there been any quality concerns?

@nickbuchananracing 15 дней назад

@@r.williamcomm7693 not that im aware of. The bikemaster one seems pretty good.

@r.williamcomm7693 15 дней назад

@@nickbuchananracing Awesome thank you.

@jimakard2185 Год назад

You think all those tire stickers or weightless, I would take them off i think you will before you Mont on bike Isn't the hole point is accuracy with the least amount of weight

@MB-ln1yk Год назад

'05 R6 service manual talks about static balancing with the gear on. What bike does this go on?

@nickbuchananracing Год назад

This is a wheel for a ninja 300.

@kickstart719 Год назад

So, after finding the lightest section of the wheel and taping it, at the 12 O'clock position, then adding my weights, the wheel is balanced after the wheel stops at either the 9 0'clock or the 3 O'clock position ?? Great video, but this part was a little unclear.

@nickbuchananracing Год назад

its balanced when no matter where you position the wheel, it doesnt move or at least it JUST SLIGHTLY wants to move. The heaviest part of the wheel will fall to the 6 oclock position and adding weight to the other end at the 12 oclcok position offsets the heavy spot to make it evenly balanced. The wheel is considered balanced when you can move it to any spot in the rotation and it stays still. meaning that there is now no more heavy or light spot. each section of the wheel is equally weighted. Hopefully that helps.

@kickstart719 Год назад

@@nickbuchananracing Thank you

@paulkelly1448 2 года назад

Does it matter what side of the wheel the weights go?

@nickbuchananracing 2 года назад

nope. doesnt matter at all.

@8alakai8 2 года назад

i was just going to type this i came from working on cars and with car wheels it matters

@nickbuchananracing 2 года назад

@@8alakai8 I could be wrong but pretty sure it doesnt matter on bikes. I supose closest to the center is technically better...

@williamfoster4268 11 месяцев назад

@@nickbuchananracing It does matter depending on what bike you have, refer to the factory service manual. Some older Kawasaki's want you to split the difference between both sides.

@nickbuchananracing 11 месяцев назад

@@williamfoster4268 that might be true that some manufacturers say that but I think its a waste of time. The difference it makes is never going to matter on a motorcycle wheel. If it helps think of this, so I ride on track mostly and most tracks have a different number of lefts or right. So usually by the end of the day or end of a race, one side is way thinner than the other from wear on that side(race tires wear quickly). You will never feel any imbalance even though its lighter or one side vs the other....not saying anyone is wrong just throwing that thought out there because its a real world example of riding on a tire thats different slightly left to right ( at 120+mph where you would expect to notice stuff like that)