How To: Best Headlight Restoration Method - Chemical Guys Car Care

Подписаться 901 тыс.

Просмотров 694 тыс.

50% 1

►NEW UPDATED VIDEO:
• How To Revive REALLY B...
Headlights turn yellow and cloudy when UV sunlight damages the plastic of the lens. Rubbing oily products or bug sprays onto lenses are only a temporary fix that cause more damage over time. Turn to wet sanding and polishing for permanent professional level headlight cleaning and restoration.
The Chemical Guys Headlight Restoration Kit combines all the sanding sheets, sanding block, compounds, and polish needed to remove the faded dead plastic, then restore crystal-clarity. Clean and restore plastic headlights, foglights, and tail lights with these professional level tools and methods.
••••••••••••••• Products Used in Today's Video •••••••••••••••••
➜ Headlight Sanding Kit:
bit.ly/461dF06
➜ Good Screw Drill Adapter:
bit.ly/3MS4XbF
➜ Orange Hex-Logic 4" Pad:
bit.ly/42zbU7u
➜ 3 Inch Rotary Backing Plate:
bit.ly/3NeBnyj
➜ JetSeal:
bit.ly/43ohlqJ
***Always protect the lenses with a sealant or wax during every detail to maintain full optical clarity.
••••••••••
● Website: www.ChemicalGuys.com
● Subscribe to our channel: ru-vid.com_...
● Subscribe to our newsletter: www.chemicalguys.com/category_...
● Like Us on Facebook: / chemical-guys-15994943...
● Follow us on Instagram: / chemicalguys
#chemicalguys #detailing #carcare

Авто/Мото

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 387

@ChemicalGuys Год назад

Best Headlight Correction! - Headlight Restoration Kit: bit.ly/3CfLixj - TORQ Rotary Backing Plate: bit.ly/3IZzu6q - Good Screw Drill Adapter: bit.ly/42lVnDL - Orange Hex-Logic Pad: bit.ly/3MLia5S

@MindfulMusic 7 лет назад

Seeing before & after results of amazing clarity in the finished product is so satisfying to watch.

@ChemicalGuys 7 лет назад

Thanks alot buddy, restoring headlights is an art form, it takes alot of work to remove the cataracts from the headlights, it's not nearly as simple as washing or waxing. It's funny, I see at least two to three oxidized headlights a day, and it feels disheartening because some people don't care. I understand though, some people aren't aware that this can be repaired, or they don't have the resources to keep their vehicles well maintained. Chemical Guys Alex -

@gargola1208 2 года назад

@@ChemicalGuys hey i just purchased every product to start a side bussines of restoring headlights, im at nj and will like to know if there any restrictions on surrounding Temperature when im doing this job without affecting the work? Like whats the coldest temperature i can restore headlight with jet seal and all your products?

@barrya.6212 2 года назад

@@gargola1208 I have a kit that has the sanding pads for drill application as well... could that leave unremovable swirl marks that even final steps wont remove? It also includes beginning grit of 800!...I assume thats only if extremely yellowed to start with that rough grit...correct? ....or is that too coarse for any situation? Thanks.

@drippingwax 2 года назад

This is the fifth video I have seen restoring the headlights on a sixth-generation Civic! I need to do mine again! :)

@ChemicalGuys 2 года назад

Happy detailing!

@RougeMaster 9 месяцев назад

I went to their shop in Gardena , they guy there even gave me a free demo ony truck tailights using their products . I bought their products,went home did my head amd tail lights ! Its been two years lights still look LIT!!!! THANKS CHEMICAL GUYS

@ChemicalGuys 9 месяцев назад

Thanks so much for being part of the Chemical Guys family!

@HarveyWysong 7 лет назад

Thanks very much. I learned why my previous efforts were unsatisfactory.

@wak3oarder Год назад

FINALLY A LIKE NEW FINISH AND NOT A FAKE SPRAY THAT YELLOWS IN A MONTH! going to go do this now! this should last much longer!

@ChemicalGuys Год назад

Thanks so much for watching, happy detailing!

@luisguajardo1197 7 лет назад

Chemical Guys, THE BEST! Thank you!!

@ChemicalGuys 7 лет назад

We appreciate the love, Luis! Stay tuned for more great content coming soon!

@3091mg 8 лет назад

Great video, straight to the point, great result! I'm now looking to get my headlights done, this has made everything a lot less complicated now I know what I should be doing

@ChemicalGuys 8 лет назад

Thanks so much for your amazing feedback ... Glad to have you as part of the Chemical Guys family

@3091mg 8 лет назад

Welcome, again, an awesome video, I'm due to try your Honeydew Snow Foam shortly, can't wait! Need to get myself a new pressure washer and foam lance first though

@michaelhuppman6413 5 лет назад

I followed this method and it worked as expected and looked fantastic. After applying the sealant, and buffed, one of the lights (passenger - 2nd light I did) now has a couple of hazy spots in the corners. Should I re-do the process on that lamp, or just do the compounding / polishing / sealing steps? Thanks!

@tykeewoods4420 2 года назад

Where u get the 3500 sand paper

@five2ne1 7 лет назад

Is there a way to fix rock/stone chips on plastic headlights? Would it require heavy cutting? I haven't been able to find any reliable sources to figure this out!

@_chavid_ Год назад

Just did this and it made a HUGE difference. Headlights are as close to new as they'll get.

@ChemicalGuys Год назад

That's awesome, happy detailing!! - CG Nick

@jg11596 3 года назад

good video and good job restoring the headlights. What "grit" would the foam pads be rated at if they had grit ratings? I see you used orange and white pads. is there any value to using blue, black or red pads in the restoring process? Thanks

@ChemicalGuys 3 года назад

Hey! Thanks so much for watching. The Orange Hex-Logic Pad has a medium cut/heavy polish which works well for refining sanding scratches. Then using the White Hex-Logic Pad for a final polish will jewel the surface and restore clarity. The Black, Blue and Red Pads are very soft and are best suited for applying your favorite glaze, sealant, and wax because they offer no cut. - CG Nick

@gmeyer6657 2 года назад

Thank you..one of the best videos I have seen!

@ChemicalGuys 2 года назад

Glad you enjoyed it! - CG Nick

@broderp 6 лет назад

Everyone has an opinion, but no one has done any real testing. Clear coat paint is said to crack or go bad and a bad idea as clear is for metal painted surfaces and not clear plastic. Others say the only way to fix is to sand with multiple grits of sand paper. Yet others claim simple solutions from bug spray to tooth paste to baking soda and WD-40. Someone should get like 20 headlights (all aged the same with the same hazing) and restore each in a particular way and then allow them to sit in the sunlight for 6 months to see which method A.) Did the best job restoring B.) held up the best. THEN I will believe a particular method works.

@thegreatpatsy 5 лет назад

I couldn't agree more. You could lose your mind with this stuff. Personally, I've tried everything and nothing works. These guys must be magicians!

@funnyfarm5555 5 лет назад

@@thegreatpatsy Chris fix restoration 1yr Later: instagram.com/p/8iyExTOjFm/ 2yrs later: instagram.com/p/BC7Ov-zOj... Who knows Give me glass lenses any day.

@Tun1ne Год назад

Personally, I’ve always applied a tint like vinyl, but clear, usually with heat, and it always holds up

@sebastianstarnes4291 Год назад

Sounds like a video for donut media

@Syndicate_tae 10 месяцев назад

Well here is my opinion. I have a headlight cleaning business and I light sand with multiple grades polish and re-coat with protective solution. They last for 4 years with no issues and it’s proven

@leahcim38 7 месяцев назад

This is ....... The only method. It took over two hours a piece. My headlight housings were so bad i was looking at replacement. Using this method i was able to totally restore my lights to factory freshr. It made for a huge difference driving aþ nigt. 🎉

@ChemicalGuys 7 месяцев назад

That's awesome! Thanks so much for tuning in!!

@paddysparrow4528 Год назад

Great video, so calm to explain. Respect !

@ChemicalGuys Год назад

Glad you enjoyed the video!!

@KurayameDark 4 года назад

Hey Guys do you know how long last the UV protection of the new Chemical Guys Headlight Restorer?

@smell5likepoo 7 месяцев назад

Looks great! Keep posting!

@ChemicalGuys 7 месяцев назад

Thanks so much for the awesome feedback! - CG Nick

@ejsgarage 8 лет назад

Thank you for the great video! :)

@nylx9039 7 лет назад

Love that the civic has a K-series in it! @chemicalguys

@123hotdelivery Год назад

Thank you for the detailed steps. I am impressed on how good the headlights turned out after using your product and recomended steps.

@ChemicalGuys Год назад

Glad you enjoyed the video!!

@wyattborrego346 2 месяца назад

How do they look now?

@123hotdelivery 4 дня назад

@@wyattborrego346 after 1 year, I am repeating the process. This time I will use Jet seal after 3 months to extend the protection withn the excess heat in the summer.

@Tj1056 7 лет назад

nice I am about to do this just I only have a small orange pad and no other colors so I have to work with it I guess and used 36 and 38 to finish it.

@palestinianM16 6 лет назад

awsome vid man ... God bless and keep up the great work!!!

@ChemicalGuys 7 месяцев назад

Thanks so much for being part of the Chemical Guys family!

@sgtdaye 5 лет назад

Got all the way to 8 mins before noticing the K. Very nice work!

@ChemicalGuys 5 лет назад

Happy detailing!

@egrizzle8342 8 лет назад

can you use VSS instead of the v34 and v36 and get the same results?

@08saha 7 лет назад

my headlights dont look so bad. but i have rock chips and scratches on it.. will this process repair it?

@JGallo-pm5dq 8 лет назад

Thanks for sharing this video

@ellitestar 6 лет назад

what size pads did you use and where can I acquire the backing plate & drill attachments for the drill.. thanks..

@ChemicalGuys 6 лет назад

Hi, great question. The pads are 4". I will link all the products below for you to see in more detail. Thanks for watching and stay tuned for more videos headed your way soon! www.chemicalguys.com/Rotary_Backing_Plate_3_Inch_p/buflc_bp_r_3r.htm www.chemicalguys.com/Drill_Adapter_For_Rotary_Backing_Plates_p/buf_screw_drill.htm www.chemicalguys.com/Hex_Logic_Medium_Heavy_Cutting_Pad_4_Inch_p/bufx_102hex4.htm

@tailorandrew624 2 года назад

Thanks for the video!!!

@ChemicalGuys 2 года назад

Glad you enjoyed it!! - CG Nick

@ScottMilnes1 2 года назад

Great video! Also, should I just use a drill or would a DA be better? Something like a Griots G8? Thanks!

@ChemicalGuys 2 года назад

Hey Scott! Both are great options however since the drill spins on one axis it will correct the headlights much faster.

@noobinho8882 2 года назад

I did a single stage on my headlight 😕 well am not satisfied at all. Now that you just show me the 2 stage polish i think that is satisfactions 👌😲 thank you

@ChemicalGuys 2 года назад

Thanks so much for watching!

@eclipsedluna1413 Год назад

Works wonderfully could use other products similar to the ones in the video

@ChemicalGuys Год назад

Thanks so much for tuning in!!

@JeffPokrant Год назад

Awesome job on cleaning the haze off the headlights! My 2008 Ford F-150 side windows have haze from years of use. Would that be the proper procedure to use to remove the haze from the windows?

@ChemicalGuys Год назад

Hey! Try using a Medium Duty Clay Bar with Clay Luber to remove haze.

@heathfiedler 7 лет назад

wouldnt it be recommened to use a none yellowing uv clear coat sealer as a final step?

@shots-shots-shotseverybody2707 Год назад

Maybe

@novemberecho71 4 года назад

Hello Nice job and nice products Any idea how long its lasts before redoing it again? Kind regards

@ChemicalGuys 4 года назад

Hi there! The headlight lenses were sealed after polishing using JetSeal which lasts up to 12 months. Routinely sealing and waxing will help to prevent oxidation. - Happy detailing! www.chemicalguys.com/jetseal-durable-sealant-and-paint-protectant/jetseal-sealant.html

@omarionfo6261 8 лет назад

what is the name if the product u used?

@heyitschinoable 8 лет назад

Dope vid, i see a K Swap with a Super Charger?

@luminositymusic3810 6 лет назад

This is a great demo- - thx for the efforts. -

@ChemicalGuys 7 месяцев назад

🤩🤩

@salomonalvarez1364 8 лет назад

does this remove scratches from headlights

@markm972 4 года назад

the fist video I've seen you, Nick with no glasses. Planning a trip to the LA shop when its safe, and if ur there please don't make fun of me if I get star struck..

@ChemicalGuys 4 года назад

Hey, thanks for watching. Make sure to stop by and say hi!

@bendalrymple9299 8 лет назад

This works well but what about the small pits? Just keep sanding? I did two sets yesterday and they looked great but the pits were still there. Suggestions?

@amishadowbanned6264 Год назад

Great question

@Official__RILO 9 месяцев назад

Just remove the light

@louferraro6301 Год назад

Thank you for this video, Nick. I've already wetsanded both lenses but I don't have any "correction polish" or "compounds" to finish the process. Can you please tell me what exactly you used so I can order them. 👍

@ChemicalGuys Год назад

Hey Lou! Thanks so much for checking out the video. The V-Line is a great addition to have in your arsenal, it includes a variety of compounds and polishes. - CG Nick www.chemicalguys.com/v-line-polish-compound/v-line-polish-compound.html?gtmListValue=Internal%20Search

@bagoroismaelarnaud2531 11 месяцев назад

Quality machine works like a charm

@ChemicalGuys 11 месяцев назад

Happy detailing!

@blairguinea6811 2 года назад

Nice job Sir, no bs.....................thankyou

@ChemicalGuys 2 года назад

Thanks so much for tuning in!!

@DWB212 5 лет назад

love the citrus car wash

@JoseAlvarez-rz6sl 3 года назад

You are a master in my eyes you really know what your doing and as well explain it so well. But I would like to know just how much do I need to spent for the materials to get the same results?

@ChemicalGuys 3 года назад

Hi Jose! Thanks so much for watching and for the incredible feedback. Check out this link to get started with headlight restoration. - CG Nick www.chemicalguys.com/headlight-and-paint-water-sanding-kit/FLEX_443_9.html

@augustomontoya4441 2 года назад

Good job !!

@ChemicalGuys 2 года назад

Happy detailing!

@LiquidEntourage 8 лет назад

can i just use the v36 and get the same results? or do i have to use the v34 too?

@ChemicalGuys 8 лет назад

It depends how messed up the headlight plastic is. The heavier cut of compound like V34 or V32 will take out deeper sanding marks in one or two passes.

@I9GaMeR187 7 лет назад

did you put a butter wet wax for protection after polishing? and even if no, will wax work after polishing ?

@ChemicalGuys 7 лет назад

Hi Edgar, that's a great question. When you polish, you want to Glaze the vehicle to restore a deep intense shine, followed by a sealant, and finally a coat of wax to help protect the paint against scratches, and aids in easier cleaning.

@bonheurgeraud8560 5 лет назад

Hello, thank you for the video. Where can i buy the sanding block and the sheet of sans paper for this sanding block? Thank you.

@ChemicalGuys 5 лет назад

Hi Bonheur, good question. You can pick up the whole kit, or the sanding block and sanding sheets individually by clicking the links below. Thanks for watching Bonheur, and make sure to check back later today for a new video upload! www.chemicalguys.com/Headlight_Paint_Water_Sanding_Block_Restoratio_p/flex_443_9.htm www.chemicalguys.com/Easy_Grip_Hyper_Flex_Water_Spot_Sanding_Block_p/flex_pad_pink.htm www.chemicalguys.com/Light_Cut_2_Self_Adhesive_Sanding_Sheets_3_Pack_p/flex_sheets_l_3.htm www.chemicalguys.com/Super_Fine_Sanding_Sheets_3_Pack_p/flex_sheets_ul_3.htm

@vincentgiordano403 Год назад

would i be okay using a carnauba wax as a substitute for the jetseal ? or maybe spraying on rustoleum clear coat ? please let me know if either is better, or neither

@ChemicalGuys Год назад

Hey Vincent! Absolutely, it is perfectly fine to apply wax to add shine and protection.

@EnnTomi1 6 лет назад

what are those rotatory yellow pad thing called? and how much for those compounds ?

@ChemicalGuys 6 лет назад

Hi Alan, good questin. In this video, Nick uses an orange Hex-Logic Cutting Pad. The exclusive Hex-Logic pattern spreads polish over the surface for an even cut and superior polishing results. Read more about it and check it out below! www.chemicalguys.com/Hex_Logic_Medium_Heavy_Cutting_Pad_4_Inch_p/bufx_102hex4.htm

@vtecef9 2 года назад

If using a D a polisher which speed do you recommend I polish the headlights on?

@ChemicalGuys 2 года назад

Hey! Use the highest speed setting of your DA to thoroughly diminish the polish and refine the finish.

@tristenfletcher577 4 года назад

How much would u charge to do a set

@crushedrgb 4 дня назад

Great job. Looks good!

@ChemicalGuys 4 дня назад

Thanks so much for your feedback!!

@og_vics5439 7 лет назад

so do you have to apply jetseal once every year to keep the results?

@meatmanphilly 5 лет назад

I was wondering the same thing. Debating on jetseal vs clear coat currently

@Bull1the1Great 4 года назад

do you have to press on the drill while polishing? my drill stalls, i guess i am pressing it too much

@ChemicalGuys 4 года назад

Hi there! Use light pressure, the drill should be able to freely spin. - CG Nick

@garanabr 4 года назад

I liked this video very much!! How do you wash the aplicator pad after using Jetseal?

@ChemicalGuys 4 года назад

Use this wash your pads! www.chemicalguys.com/foam-and-wool-polishing-pad-cleaner/foam-wool-pad-cleaner.html

@HondaSI760 Год назад

Good video. But can we just admire this k swapped ek 🔥🔥🔥

@ChemicalGuys Год назад

😍😍

@clarkriccobuono3903 2 года назад

Thank you

@ChemicalGuys 2 года назад

Happy detailing!! - CG Nick

@vacuumfreak95 8 лет назад

Great video! I need to restore the headlights on my Buick LeSabre.

@rodhunter4351 3 года назад

You need to get rid of the Buick. .. that's your problem

@nickkelly4208 5 лет назад

Do you have links to the backing plate, drill attachment, pads, and all the compounds used?

@ChemicalGuys 5 лет назад

Hey Nick, thanks for the question. The products used in the video have been added to the description. - Happy detailing! - CG Nick

@nickkelly4208 5 лет назад

Chemical Guys thank you!!

@99elements23 7 лет назад

Could also put a little solvent mixed with the water.

@kevinvines1846 8 лет назад

Do you find a 1000 grit 1st stage too abrasive? I use 1000, 2000, then 3000 trizact, followed by the 2 stage V34/36 as you did. I also use your jetseal. Turns out perfect every time and lasts!

@kevinvines1846 7 лет назад

Lb No, wax needs to be replaced MUCH more often than the jetseal. Jetseal can last a year if you do not live in a harsh climate. I have been doing this awhile.

@joshuaguenin9507 6 лет назад

Chemical guys dont have lower than 2500 grit....

@Static1011 6 лет назад

@chemical guys I have a car with only 30,000 miles the headlights aren't fogged but they are pitted from highway driving, also one has what looks to be a hazy looking burnish ring about 5" diameter that has formed on what looks like on the inside on one headlight lens you can only see when its on, so i'd probably have to take apart the headlight assembly to correct it, would i need to put UV protectant on the inside after too?

@ChemicalGuys 6 лет назад

Hi Static101, a better a idea would be to simply apply two coats of JetSeal. Just wait 20 minutes after buffing off the first application to apply a second a layer. Another tip is to clean and treat your headlights on a regular schedule to ensure they are always enjoying the most protection. These two things are your best bet to protect your headlights from UV rays, both inside and out. Thanks for watching and stay tuned for more videos headed your way soon!

@Static1011 6 лет назад

Chemical Guys Chemical Guys yeah I want to sand the pitting out of the headlight then polish and seal. But for the inside where the hazy ring has formed I'm assuming I'll need to sand that as well and seal. The only thing I'm worried about is if I seal the inside with uv protectant will it need to be sealed again in like 12 months I know these sealers only last like a year tops. And it's a big job to remove my bumper and take out the headlight and open it

@Static1011 6 лет назад

Chemical Guys Update. I wetsanded by hand with 1000, 2000, and 3000 and then used compound then polish. The pitting is gone. However. When the headlight is on its hazy cause there's micro scratches all over it. Are these headlights suppose to look showroom new when done?

@squirrelkilla7371 8 лет назад

Why don't you hit it with a coat of UV Clear Coat and then JetSeal?

@ericcunninghamrealtor 9 месяцев назад

How do you polish headlights that have the alignment nibs on them? Do you sand the nibs flush to surrounding plastic?

@ChemicalGuys 9 месяцев назад

Hi there! It is perfectly fine to file and sand away the nibs or work carefully around them to prevent damaging the pads. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RLYlS1eTmMA.htmlsi=L5FVf0yoIhLzXZvR

@PeteNC 5 лет назад

Can one sheet of sandpaper do both headlights? Or do I use one sheet per headlight

@ChemicalGuys 5 лет назад

Hey Peter! These sanding sheets are reusable and can be used to refine several headlight lenses before being replaced.

@mikedior3089 3 года назад

It worked, it lasted for a solid 8 months before it started to kinda fade. It was nowhere near where it started tho. Good vid

@ChemicalGuys 3 года назад

Happy detailing!

@mohamedthepedophile4789 8 лет назад

You guys don't paint the light with UV protection clear coat, and then wax them with car wax? I do like your 2 buffing stages after the wet sanding.

@KiVeNiCo2015 Год назад

Hey Chemical Guys Team, just wanted to let you know that, to this day, this is THE best headlight restoration video I've seen. I use these steps and your products. I've followed the steps on this video to the T and it really does work. The only observations I have are the following, the guy doesn't present himself in the Intro. I'd like to know who is the person showing me the steps. Observation two is, the grit sandpaper he uses on step 2, which he states is 3500 grit, it's nowhere to be found. Most places have 2500, 3000 and then jumps to 5000. I mainly use the 3000 which is good but I'd like to use the right one. Question, will using a 5000 grit work if I don't have/find a 3500 grit? Love all the videos you guys post and hope to hear from you soon.

@ChemicalGuys Год назад

Hey Edward! Thanks so much for the awesome feedback!! 3000 grit is great for refining sanding marks as well as light imperfections. We have used 3500 and 3000 grit for final sanding and achieved great results. 5000 grit may be a little too fine for headlight restoration. Happy detailing!! - CG Nick

@KiVeNiCo2015 Год назад

@@ChemicalGuys thanks for the reply. Already ordered my Chemical Guys Sanding Kit on Amazon to finish off a headlight in the next couple of weeks.

@aacar4095 Год назад

Does ceramic coating work on headlights as a final layer? I know some also spray them with clear coat.

@ChemicalGuys Год назад

Absolutely!

@bleechish Год назад

true professional

@ChemicalGuys Год назад

Thanks so much for tuning in!

@supaxr2h 2 года назад

What backing plate did you use for that drill attachment

@ChemicalGuys 2 года назад

Hey! This is a 3 inch rotary backing plate. www.chemicalguys.com/evolve-r4-rotary-backing-plate/evolve-r4-backing-plate.html?gtmListValue=Internal%20Search

@augustito1977 3 года назад

the headlights on my car looks like previous clear coat is pealing off,, can I apply this product? thx...

@ChemicalGuys 3 года назад

Hey there! Yes, following the same process shown in the video will remove flaking protectant and restore clarity.

@SteveFloresCoach Год назад

Thank you for this video! Can we use a clear coat spray for a permanent seal instead of the jet seal?

@ChemicalGuys Год назад

Yes, absolutely!

@SteveFloresCoach Год назад

@@ChemicalGuys perfect!! I’m very excited to use the products and clean up some old headlights on my daughter’s car! Thank you again

@mrdcjsr.5683 4 года назад

can you please list the part names for the polishing foam? name, size, etc

@ChemicalGuys 4 года назад

Hey! Thanks for checking out the video. All products are listed in the description.

@humbertomartinezrivera24 8 лет назад

will have an e-mail to learn more about your products and have shipments to Mexico

@kookie4nookie 10 месяцев назад

Can I use the V38 finishing polish in place of the jet seal?

@ChemicalGuys 10 месяцев назад

Hi there! A protectant such as Jet Seal is needed to lock in clarity and repel harsh elements.

@danalmeida5380 9 месяцев назад

My headlights have light foggy haze on them, want to clean them up before they get real bad, what would you recommend?

@ChemicalGuys 9 месяцев назад

Hey! Check out Headlight Restorer to remove oxidation and haze. www.chemicalguys.com/headlight-lens-restorer-protectant/headlight-lens-restorer-protectant.html

@michaeltodd7008 3 года назад

Excellent

@ChemicalGuys 3 года назад

Hey Michael! Thank you so much for watching! 😀 - CG Nick

@Jay-bp7ph Год назад

So you used v34 light compound first, then v36 heavy compound to finish?

@ChemicalGuys Год назад

That's right!

@kingmike1580 6 лет назад

Great video..

@FlyBoyBigBlue 8 лет назад

8:31 Funny, you must have used some on that white paint too... ;)

@ChemicalGuys 8 лет назад

Alex used VSS.. Stay tuned for another video... ;)

@great4ever845 3 года назад

@@ChemicalGuys how hard do you have to rub no homo ajjajajajaha

@sirendralashley3926 2 года назад

Any good buffing machines kit suggestions

@ChemicalGuys 2 года назад

Hey! Many detailing enthusiasts choose the TORQ 10FX to correct paint and apply coatings. www.chemicalguys.com/torq-10fx-random-orbital-polisher-kit-10-items/BUF_501X.html?gtmListValue=Internal%20Search

@turbocatman79 2 года назад

The pads on the drill are not listed in the description. Thank you again

@ChemicalGuys 2 года назад

Hey William! Check out this link. www.chemicalguys.com/drill-powered-headlights-restoration-and-protection-kit/VIR820.html?gtmListValue=Internal%20Search

@vickiechapin5995 7 месяцев назад

Post a Materials List please & Where to purchase It!

@ChemicalGuys 7 месяцев назад

Hey! Check out the links in the description.

@PubStarFlash 6 лет назад

Do you have a link to the pads you use??

@ChemicalGuys 6 лет назад

We indeed do. Check em out! www.chemicalguys.com/Polishing_Pads_s/42.htm

5 лет назад

Do you wash out your pads with just water and how often?

@ChemicalGuys 5 лет назад

Hi! Great question. To clean foam pads, we only use Pad Cleaner, which will deep clean and restore your foam pads so you get the best results and so your pads can last their longest. Check it out below and make sure to check back later today for a new video upload! www.chemicalguys.com/Polishing_Buffing_Pad_Conditioner_16_oz_p/buf_301_16.htm

@nimeshh44 4 года назад

Will it remove minor scratches?

@ChemicalGuys 4 года назад

Hey! The fine abrasives in Headlight Restorer will refine light scratches.

@vaschy2330 2 года назад

Can you polish by hand with the v34 and v36

@ChemicalGuys 2 года назад

Hey! It is possible to polish by hand using V36 and V38. V32 and V34 are best suited for machine polishing.

@JapmotorsportNet11129869a 6 лет назад

Hello guys, can I use same process and products to restore rear taillights?

@ChemicalGuys 7 месяцев назад

Absolutely!

@TomFYouTube Год назад

I just need a ounce each of V34, V36 and sealant. Where can I get tiny quantities? Thanks.

@ChemicalGuys Год назад

Hey Tom! Check out the 4oz quantity kit. www.chemicalguys.com/v-line-polish-compound/v-line-polish-compound.html?gtmListValue=Internal%20Search

@frankmeeuwesen9614 2 года назад

How long did the sanding steps take?

@ChemicalGuys 2 года назад

Hi Frank! Sanding doesn't take very long since its only the headlights but this is a necessary step for perfect clarity so don't rush it. - CG Nick

@samerhaddad358 7 месяцев назад

You mentioned used V34 (abrasive compound) and jet sealant. Could you list the full name and brand name of these materials! Where I can buy them from?

@ChemicalGuys 7 месяцев назад

Hi there! Check out the video description above to view all products used in this tutorial.

@tacticalpickle7 2 года назад

Can you put a link to the b34 and 36 compound. Thanks

@ChemicalGuys 2 года назад

Hi Andy! Check out this link. www.chemicalguys.com/v-line-polish-and-compound-kit-for-light-to-heavy-swirls-and-scratches/v-line-polish-compound.html?gtmListValue=Internal%20Search