How To Completely Correct Contaminated and Scratched Paint With A Two Step Polish! - Chemical Guys

Подписаться 897 тыс.

Просмотров 631 тыс.

50% 1

Restore brilliance and shine by following along with today's video! Using a dual action polisher cuts polishing time and saves effort. The TORQ10FX gives the perfect speed, control, and accuracy to perform at the highest level on any job. Use lower speeds to spread wax or sealant with an even coat, or higher speed settings to remove defects like swirls and scratches. Speed and perfection was our goal in developing C4, the evolutionary compound capable of precision paint correction and perfection. Rapid results in less time in a compound that is effortlessly capable of removing scratches and swirls, sanding marks, scratches, acid rain etching, and severe swirls and holograms means this is your new go-to compound whether you have a DA or rotary polisher, or you’re working by hand. C4 is developed for fast cutting paint correction without long work times and is designed and developed for tremendous results in the shortest time possible.
With P4, speed is of the essence and long work times are not required, so you can get incredible results in the shortest time possible. When you’re looking for a truly perfect finish with deep gloss, P4 polish technology effortlessly produces flawless results with your DA or rotary polisher. The versatile polish is capable of correcting 2000 grit and finer sanding marks without dusting or leaving behind residue, making this polish extremely easy to use and work with.
- OG Clay Bar
bit.ly/453nABH
- Clay Luber
bit.ly/3MxdoKE
- C4 Clear Cut Correction Compound
bit.ly/3WaB2j1
- P4 Precision Paint Polish
bit.ly/3IinRXH
- TORQ 10FX DA Polisher
bit.ly/41Hj8ph
- Black Light Glaze
bit.ly/4531FdV
- Jet Seal
bit.ly/42EVISY
- Lucent Spray Shine
bit.ly/3IgDtet
- Polishing Pad Conditioner
bit.ly/3MwDLjK
--------------------------------------
● Find a Detail Garage Near You: www.chemicalguys.com/storeloc...
● Website: www.ChemicalGuys.com
● Subscribe to our channel: ru-vid.com...
● Like Us on Facebook: / chemicalguysmfgco
● Follow us on Instagram: / chemicalguys
● Follow us on TikTok: / chemicalguys
#chemicalguys #detailing #polish

Авто/Мото

Опубликовано:

28 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 322

@ChemicalGuys Год назад

Paint Correction Like A Pro! - C4 Clear Cut Correction Compound: bit.ly/3pJUB5I - P4 Precision Polish: bit.ly/432QsrN - Black Light Glaze: bit.ly/3MxiPcv - JetSeal Protectant: bit.ly/3IbOUnl

@TruckXaleRepair 8 месяцев назад

Yep 👍

@shanehaynes9021 Месяц назад

Uii

@hankschrader149 8 месяцев назад

I love the fact that you guys did an older vehicle with dents, paint failing and showed real results! Been working on my 66' candy apple red Galaxy using Chemical Bros products including your buffer 👍👍

@ChemicalGuys 8 месяцев назад

Thanks so much for tuning in!

@flytheater 5 месяцев назад

Agreed, not everyone has a Ferrari, Porsche, or any other super car to apply these techniques to.

@francjac4546 2 месяца назад

I'm a mobile detailer, and I absolutely love Chemical Guys product, I cannot say that I've disliked any! These videos were really helpful for me to start this business, thank you Chemical Guys

@ChemicalGuys 2 месяца назад

Glad to have you as part of the Chemical Guys family!!

@itzdiff8555 5 месяцев назад

I used the C4 and P4 on my wife’s SUV…..WOW what a difference, great products guys! Keep them coming

@davidmccallum3688 Год назад

I appreciate the Chemical Guys team taking the time to make these tutorials for us.

@ChemicalGuys Год назад

Hi David! Thanks so much for the awesome feedback!!

@FordF4NN Год назад

As always, it's good to see this stuff in action and that it's possible for everyone to do it if they want to. Great products and excellent results!

@ChemicalGuys Год назад

💪 Thanks for watching!

@stephensynergy Год назад

Thank you, Joey! The list of compounds and pads are especially helpful. Not having the power-washing tools, your micro-fiber hand-glove and EcoWash followed by Luber and ClayBar before the cutting and polishing and protecting has been my favorite. Your process sure is impressive! Thanks for great products and demonstrations!

@bryanmonserrate8288 Год назад

I don’t care what they say about you guy’s, i love your products and my clients love how the car’s look so it’s a win, win. I have your entire collection of products, bucket, rags everything.

@ChemicalGuys Год назад

Thanks so much for being part of the Chemical Guys family!

@paulpereza3845 Год назад

Dat background music got me bumpin my head... Dope video

@ChemicalGuys Год назад

Glad you enjoyed the video!

@P4SDetails Год назад

Paint correction is one of the sickest projects for sure.

@ChemicalGuys Год назад

Always satisfying! Thanks for being a part of the Chemical Guys family

@stevegatting5237 Месяц назад

Absolutely best car care video I have seen, am ordering all products now, fantastic, thank you so much gang.

@ChemicalGuys Месяц назад

Thanks so much for being part of the Chemical Guys family!

@jeremiahmoss6015 10 месяцев назад

Glad Joey is still rockin it. Been watching his vids for years.

@ChemicalGuys 10 месяцев назад

👍👍

@justcusimazn 5 месяцев назад

Thanks for showing how this can be done on a realistic car for most people. As much as we'd all like we cant be driving around in a Porsche 911 and sometimes gotta make do with a honda civic. But this shows yiu can still look good even if your car is a little beat up!

@MrBikedrummer Год назад

I've got to say thank you to all the viewers for asking such great questions! You've helped me immensely!😊

@ChemicalGuys Год назад

Happy detailing!

@randomdudehere4828 11 месяцев назад

I appreciate these “walkthrough” style videos.. thank you

@ChemicalGuys 11 месяцев назад

😀😀

@k4x4map46 Год назад

yeah first timer with a DA even a Harbor Freight model your combos do work. I started with the V34/V38 now I will try this combo C4/P4. Thanks for the tips!!

@texasbrotherhood3930 Год назад

Let me know which combo you like better! For black paint

@k4x4map46 Год назад

@@texasbrotherhood3930 Copy that!! I been a lil lazy so I'll get on it and let ya know soon as possible!! Coincidentally I'm working on black paint as well...I didn't have the pad treatment so that'll be worthy to note as well.

@ChemicalGuys Год назад

Enjoy your detailing products!

@alexzuniga6329 6 месяцев назад

Y’all’s product is amazing I just did headlight restoration and I’m highly satisfied as ur customer and u highly satisfied my customer 💯💯💯💯‼️‼️‼️‼️‼️‼️

@ChemicalGuys 6 месяцев назад

Glad to have you as part of the Chemical Guys family!!

@kukkaties 9 месяцев назад

One more detail, in CA it's a bit hot and doing this stuff with car, which is really heated from the direct sun, this is not good for the health of the bodypart (If you want to ever do this and the hot weather is expected, do it in the shadow, or early at the day or in the evening). On the other hand I appreciate the job the guys have done.

@mantovauniepeters1927 Год назад

Awesome 👏 job. Real educational

@ChemicalGuys Год назад

Glad you enjoyed the video!!

@mmortada1978 Год назад

Amazing as always ❤️

@ChemicalGuys Год назад

Thanks so much for the awesome feedback!

@SteveFloresCoach Год назад

I was thinking that maybe your products could be color matched with the pad colors! Thank you for the video!

@ChemicalGuys Год назад

Happy detailing!

@osanshouo1684 Год назад

Great job Joey 💪💯

@ChemicalGuys Год назад

Happy detailing!

@parmanndhensaw6845 Год назад

Love your products!!

@ChemicalGuys Год назад

Thank you for being part of the Chemical Guys family!

@RachaelMaresh 10 месяцев назад

At 12:40 are you increasing the speed of the polisher?

@conradborba7856 6 месяцев назад

Great video. My car has a similar issue as this one just above the windshield on the roof. Is there anything you recommend to fix that? I don't think its bare paint yet but can it be saved??

@bboylorettoEight08 Год назад

Super helpful explanation

@ChemicalGuys Год назад

Glad it was helpful!

@GgG-71494 9 месяцев назад

Hi! what to do after polishing if i want to add some spray ceramic? do i rinse the car first with water to remove excess polish? or is it okay to just spray on top of polish? thanks!!

@victorf.4599 Год назад

Can I use black light glaze right after washing my car with black light soap? Or do I need to need to use C4 and P4 in order to use black light glaze? The paint of my car is not really bad, btw.

@raidersperez1278 7 месяцев назад

What happens do the roof? Do you still go over it? Do you ignore and go around the part that’s failing but still do the rest of the roof? Do you still Apply wax the whole roof after you polish it including the failing paint Even tho you didn’t polish?

@abdulmajeed1173 Год назад

very informative. Thank you sir

@ChemicalGuys Год назад

😃

@justinmieirs3501 Год назад

Great video. Thanks

@ChemicalGuys Год назад

Thank you for watching!

@GarbageMan994 9 месяцев назад

How much pressure do you use when doing your passes with C4?

@openshot 9 месяцев назад

Do you have a video of polishing a fresh painted car with some dust in the paint? If not what polish would recommend for wetsand

@raredan60 3 месяца назад

I purchased a polishing starter kit that includes V32, V34, V36 and V38. I am planning to perform "paint correction" on my old Mercedes that has mild and heavy scratches, swirl marks and everything else that you would expect on a well-loved 23 year old car. I will clay bar first. Should I begin with V34? Can I go down to V32 if I don't see the results expected with V34? Also, what is the difference between the V series products and the C and P series products?

@mokhan0982 Месяц назад

Do you have a video detailing steps for windshield/Windows? My windshield is having this tiny spot which looks like dust but won't clean with cleaners. Thanks

@phatsublime День назад

I saw you apply the product slowly, C4, then you did some slower passes, but did you change the speed of your buffer for that 2nd coat? Or left it at speed 1?

@anyfeckinusername Год назад

How does the C4 compound compare to the V32 & V34 compounds? Similarly, when to use P4 rather than V36/V38? Maybe I haven’t spent long enough studying Chemical Guy’s products, but it’s not intuitive as to which product is best for my needs.

@ChemicalGuys Год назад

Hi Ted! C4 and P4 are a great combination to cut down on time and effort while still achieving professional results. C4 is comparable to V34 and P4 starts out aggressive then refines to a comparable V38.

@2.Plus.2.Equals.5 Месяц назад

I don't know how many people are going to spring for a $500 Polish job on an $800 car but nice work.

@voiceofalabama Месяц назад

Those are the best cars to do it on. I got a E36 conv for 2k. And that baby is beautiful and I just did this job to it and got some BBS on it. Summer bout to be great.

@tenzin044 2 месяца назад

Hi there! Just to be sure-I can use clay or another decontamination liquid? Make any sense use dec liquid after clay? just to be sure is all gone? Greetings from UK, Tom

@alexhendricks9280 Месяц назад

Bravo great work

@ChemicalGuys Месяц назад

👍

@hitman3867 9 месяцев назад

Hey quick question, how can I get a dried up silly putty or silly string color, off-white car and dried up when the sun and left a marker type stain on it is there anything I can use that you recommend?

@clwest3538 Год назад

I see your two Smarts behind you! What do you use on their soft plastic panels to keep them looking good?

@ChemicalGuys Год назад

Hey! Check out HydroShield to lock in an OEM finish while repelling harsh elements. www.chemicalguys.com/hydroshield-vinyl-rubber-plastic-ceramic-shine-coating/TVD11616.html?gtmListValue=Internal%20Search

@VBOJAN86 9 месяцев назад

QUESTION : If car has a lot of scratches and some are quite deep so you need to paint them..but you also are planning to do full paint correction.. should we: 1. We first sort those deep scratches (preparation,sanding, painting, polishing), then do the full paint correction of whole car... 2. We do painting of deep scratches mid way of full paint correction... (after wash...iron and tar decontamination and clay bar decontamination) 3. We do all the steps of paint correction and before applying ceramic coating we focus on sorting those big deep scratches

@irhm8640 Год назад

What a fantastic video.

@ChemicalGuys Год назад

Glad you enjoyed it!

@jmdfineart Год назад

wow fabulous demo & tutorial -- am learnng so much about your products & process ... btw ..... what is the music @ 15:50? .. it is absolutly fantastic!! ... as ever .... thanks so very much for all your hard work and sharing your expertise with us ... Iʻve subscribed and will be following many more of your videos ;)

@ChemicalGuys Год назад

Thanks so much for tuning in and for subscribing!

@MichaelFG Год назад

I'm hoping I get to try the clay bar from your product line

@ChemicalGuys Год назад

Happy detailing!!

@chrispy4u2 11 месяцев назад

Will these polishing pads fit on an m18 milwaukee polisher? I have mo access to an AC outlet

@slomotion1028 10 месяцев назад

Chemical Guys, I've been looking for a source of information, or a "guide", so to speak. But I'm not sure what I'm looking for even exists. I've heard different professional detailers say different cars require different products inside and out. Do you provide such a guide in which you recommend certain products of yours for that specific vehicle? For example, let's say I have a 2008 Dodge "whatever whatever", I look that up in the guide, and it tells me which of your products are safe on the interior, seats, carpets, outside, wheels, etc. Thank you for your response!

@HoltistheGOAT Год назад

How would you compare Jet Seal vs Butter wax after using the black light glaze? I have butter wax but should I consider jet seal instead?

@ChemicalGuys Год назад

Hi there! JetSeal will provide a longer lasting barrier of protection whereas Butter Wet Wax adds a warm gloss. Use them in tandem for the best of both.

@HoltistheGOAT 7 месяцев назад

@ChemicalGuys will black light glaze offer a barrier of protection? I ask because I used butter wax and then the black light glaze recently on my black truck to prepare for winter

@antilag8837 5 месяцев назад

Im about to do this process on my 2014 bmw, but its supposed to rain that night. Will it be okay to take out into the weather or does it need time to cure?

@DavidRuiz-nb9fh Год назад

How often should you clean the pad during the compound and polishing stage?

@pullingthestrings5233 Год назад

Yes

@hoodiealan9518 Год назад

I've heard after every panel or some people like to clean it after every little section on the one panel

@ChemicalGuys Год назад

Hi David! It is normal to clean the pad several times during the job depending on paint condition and products used.

@philliph259 Месяц назад

What speed settings did you use? Speed setting 1 to spread out c4/p4 but did you increase the speed to compound or did you keep at speed setting 1?

@ChemicalGuys Месяц назад

Hey! Yes, when using a DA/Random Orbital use the lowest speed setting to spread the product and then use the highest speed setting to diminish the compound/polish.

@johnnysmith5961 9 месяцев назад

Hi, excellent video, did you keep the speed at 1 the entire time?

@ChemicalGuys 9 месяцев назад

Hi there! Use the highest speed setting on your dual action to break down compound and polish.

@enriquemos6778 9 месяцев назад

do i need to polish and seal if i’m going to wax after?

@xXsc3n1cXx 2 месяца назад

Thats the nicest set of 5 spoke 7th gen wheels left on earth

@ChemicalGuys 2 месяца назад

😆😆

@hernang7509 16 дней назад

What speed volume do you finish polishing with white pad?? Ijust ordered pads n compoud from chemical guys thanks...

@Npg2 14 дней назад

Keen to understand this too

@Rooki3_ Год назад

Any chance you have a video on how to correct the scratches on and behind door handles?

@ChemicalGuys Год назад

Hey! Check out this video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tVnONEF751Q.html

@Rooki3_ Год назад

@@ChemicalGuys thank you!!

@vermontvermont9292 11 месяцев назад

You can also use the cigarette cellophane test. Great way to test to see if you need to clay more.

@ChemicalGuys 11 месяцев назад

Happy detailing!

@chriswaidelich6640 Год назад

How long does one pass take to complete? What is your hand speed rate? Also what speed settings did you use for c4 and p4 passes?

@ChemicalGuys Год назад

Hi there! Work in a 2 foot by 2 foot section, moving 1 inch per second.

@adamcurrie3026 Год назад

What about speed setting for polisher? Still 1 setting?

@ohboy2592 Год назад

@@adamcurrie3026no. You’ll never get any results using 1. Most use setting 5 but you can play around and see what you like best.

@defritzel Год назад

@@adamcurrie3026 The product bottles will give recommendations for pad speed etc

@gabrielquinones-medina2707 Год назад

So say i wanted to add ceramic coating to my car. Would that theoretically be applied after I have polished with the C4/P4 combo? Or would I still need to apply black light and then ceramic coating?

@ChemicalGuys Год назад

Hi Gabriel! That's right, ceramic should be applied to a bare surface that has been polished.

@alexvasilchuk3601 Год назад

Hey CG how often do you spray pad conditioner onto a pad? Every time you add compound/polish or just one to three sprays at the beginning.

@ChemicalGuys Год назад

Hey! Use Pad Conditioner for the first few panels then as needed.

@josephciaccio8211 Год назад

great video! quick question, from a noobie. What these same techniques be safe on a classic car, like a 1975 Corvette Stringray? As I understand, they didn't have clear coat back then, its just enamel.

@ChemicalGuys Год назад

Yes, absolutely!

@josephciaccio8211 Год назад

@@ChemicalGuys thank you! you're giving me the courage to try!

@Martiizzer Год назад

Any advice on back and shoulder pains while polishing ?

@ChemicalGuys Год назад

Hi there! Reduce fatigue by using less pressure on the machine and finding the most comfortable position.

@muhammadsameerdero1830 Год назад

After putting compound, when i try to remove it with cloth the compound is just not getting off easy untill i put pressure on cloth with fingers

@blackfoxmp5 Год назад

Can you use C4 and P4 with a buffering pad, or do you need a rotary polisher?

@ChemicalGuys Год назад

C4 and P4 can be applied by machine using a rotary or dual action or by hand.

@juanvel389 Год назад

Quick question, when you showed Black Light Glaze it said it was a sealant. So why are you applying an extra sealant(Jet Seal) if Black Light is a glaze and sealant??

@ChemicalGuys Год назад

Hi there! Black Light is primarily a glaze that has some sealant properties, follow up with Jet Seal to add a long lasting, durable layer of protection.

@Brandon-yj4pw Год назад

@@ChemicalGuys can i put a paste wax then a liquid ceramic coat ? Or only one ty for your time

@davidsteadyjr8243 Год назад

@Brandon135 no a sealant needs to bond direct to the Clear coat to protect correctly and last. After you seal u can top coat with wax

@joshreece5803 Год назад

What backing plate is that? I don’t see it listed on site. Doesn’t look like the ones I have on my torq polishers.

@ChemicalGuys Год назад

Hi Josh! This is the original 5 inch backing plate.

@richardPalmisano 2 месяца назад

I have to C4 cut correction I don’t have the polishing, so can I use the V 32 polish or is it the 38 the lower the number the finer it is right ?

@ChemicalGuys 2 месяца назад

Hey! Correct, the V-Line is variety of compounds and polish with the most aggressive being V32 and least aggressive being V38.

@samdickinson8212 Год назад

So you could do a 2-step with C4/P4 but what about V34/V38? What would be the major differences here? If you started with V34 you could also do a 3-step with V34/V36/V38.

@18monthplan 4 месяца назад

My question exactly

@corrywilliams1290 5 месяцев назад

Is the c4 compound better than the V line compound you guys offer?

@ChemicalGuys 5 месяцев назад

Hi there! The combination of C4 and P4 is perfect for vehicles that don't require multi-step paint corrections or when you're short on time.

@raysilva12 Год назад

Does it work the same to just rinse off the clay lubricant with a pressure washer instead of wiping it off?

@ChemicalGuys Год назад

Absolutely!!

@TruckXaleRepair 8 месяцев назад

Welcome to this guy because he is cool 🤙

@ChemicalGuys 8 месяцев назад

🤩🤩

@lovelykkim9643 Год назад

How often are we able to reuse the clay bar? Are we supposed to throw away the piece we just used? If not, how do we clean it?

@ChemicalGuys Год назад

Hey! Roll and knead the clay bar until a clean side can no longer be found at which point the bar should be replaced.

@brother_maleik Год назад

Can you go over blacklight glaze with the hydro slick or whatever the hydro ceramic coating is

@ChemicalGuys Год назад

Hey! It is best to apply HydroSlick to a bare surface and then it can be layered with your favorite glaze, sealant and/or wax.

@brother_maleik Год назад

@@ChemicalGuys ok thought so, cuz in the video you said you'll apply blacklight and then the sealant, which I was confused about I thought it should be the other way around

@Frankie5Angles Год назад

I’m all set to polish tomorrow but forgot to buy your polish conditioner. Could I simple use the clay lubber water?

@ChemicalGuys Год назад

Hi Frank! It is safe to use clean water to prime the pad but this should be a temporary solution.

@Frankie5Angles Год назад

@@ChemicalGuys thanks for the quick response guys!

@ChemicalGuys Год назад

Happy detailing!

@santiagovalenzuela7454 Год назад

Does it have to be the entire car or can I just buff and polish say where the door trims use to be? I removed my door trim, left behind lighter shade of actual color and some minor scratches and swirls kinda…doi have to do my entire car or just those spots ?

@ChemicalGuys Год назад

Hey! It is possible to spot polish only the affected areas however it may be necessary to blend the surrounding area to prevent a noticeable difference.

@tmoran8259 7 месяцев назад

All of the first cutting step is on speed 1? Once the product is spread, did you turn the speed up?

@ChemicalGuys 7 месяцев назад

Hello! Use the lowest speed setting to spread the product in a two foot by two section before using the highest speed setting(for dual action polishers) to break down the product.

@andrewsulfaro3468 2 месяца назад

I have a question can you claybar with pinstripes over paint?

@ChemicalGuys 2 месяца назад

Absolutely!

@corrywilliams1290 5 месяцев назад

Can the P4 be used in combination with other glazes and sealants?

@ChemicalGuys 5 месяцев назад

Absolutely!!

@pandaaazy5062 Год назад

can you use Black Light Glaze on Carbon Force ceramic coating?

@ChemicalGuys Год назад

Hey! Yes, Carbon Force can be layered with your favorite glaze, sealant, and wax.

@stevencastaneda4808 Год назад

Can I do all these steps but replace the spray shine with Hydro Slick?

@ChemicalGuys Год назад

You can mix and match almost anything! If you are going to apply Hydro Slick or any other ceramic, however, we recommend applying it directly after the polish, and letting it cure before applying any other waxes, glazes or sealants on top.

@rosendorendonjr Год назад

Hey guys, am I able to use a ceramic coating product after using ALL the products you guys used in THIS video?

@ChemicalGuys Год назад

Hey! Apply ceramic after the paint correction stage, then it can be layered with glaze, sealant and wax.

@stephanietorres6835 Год назад

Which would be best to use the C4&P4 or the V line products?

@ChemicalGuys Год назад

Hey Stephanie! Start with a test spot to determine the correct pad and chemical combination. Use a White Pad with P4, if more abrasives are needed use an Orange Hex-Logic Pad and C4.

@shanesackett7597 Год назад

when i polished my car with VSS and the TorqX, there was still paint scratches after, i’ve watched several videos of your guys tutorials, i don’t know what i’m doing wrong, how can you help

@ChemicalGuys Год назад

Hi there! It may be necessary to use more abrasives for deep scratches and swirls.

@angelproductionsvip Год назад

Search orange peel paint, there's a guy sanding with an air sander he's the best explaining how to sand without the wet sand.

@Daali Год назад

what speed on the 10FX for the cutting with C4? 25 / 35?

@ChemicalGuys Год назад

For spreading, use the lowest speed setting. For cutting, it depends on the level of scratches, but most times you can get away with the highest speed setting for the fastest cut!

@k4x4map46 Год назад

@@ChemicalGuys cool deal. was looking for this answer versus posting a similiar question...

@tmxx3328 Год назад

Could you of also used v32 or v34 instead? or are the results better with C4 and P4?

@ChemicalGuys Год назад

Hey! For most aggressive cutting, use V34 or even V32 to remove deep imperfections.

@tmxx3328 Год назад

Man you guys are on top of it, very thankful for your videos I was able to find one to get an understanding of your different polishes and compounds also v line products. Now I definitely see why v32 or 34 would not be too smart to use on here😂

@Brandon-yj4pw Год назад

Can i put a wax after paint correction snd then liquid ceramic or no ?

@ChemicalGuys Год назад

Hello! After paint correction lock in your hard work by applying ceramic and then it can be layered with your favorite glaze, sealant and wax.

@kristiangarnica6210 Год назад

Can you do paint correction outside I don’t have anywhere that fits my truck I’m assuming I can..?

@ChemicalGuys Год назад

Hi there! It is best to polish indoors or shaded area when the surface is cool to the touch.

@Npg2 14 дней назад

What setting do you apply the black light and jet?

@ChemicalGuys 14 дней назад

Hey! Use the lowest speed setting when applying glaze, sealant and wax.

@DwHero1 Год назад

How long does it take you to do something like this? Detailing a car to this extent?

@stevenstewart1308 Год назад

I clayed, polished, and hydro slicked mine and and it took an entire day. That was with only polish step.

@ChemicalGuys Год назад

To do the full car from start to finish could be anywhere from 4-12 hours depending on level of correction required and how detailed you want to go. Total length is really up to you - if you are looking for absolute perfection, you could theoretically work on one car across several days! 😍

@vermontvermont9292 11 месяцев назад

Rather than the spray shine could I use an actual ceramic coating? I'm trying to figure out when the best time to ceramic coat would be. After the sealant I imagine?

@joey4261 10 месяцев назад

ceramic coatings always goes before anything else. that’s the most durable, longest lasting protection, which is why you want it under everything such as sealants, waxes, etc

@vermontvermont9292 10 месяцев назад

@@joey4261 I did. Almost a month ago now. Did a light machine buff since my car barely needed it. Obviously a wash first, clay, and IPA in-between everything. You know what I mean. Then once the paint was super clean and ready I applied the ceramic coating. Waited a week until I washed it again. Since then I use a quality spray ceramic detailer after my washes.

@juthanemanase8818 Год назад

how long does it usually take to wash, dry, clay bar, polish & sealant the car?

@ChemicalGuys Год назад

Hey! Thanks so much for tuning in. A detail can take anywhere from 3 to 8 hours depending on the condition of the paintwork.

@MrBikedrummer Год назад

Long enough so CG have time to make another video with all new products so you have to start over. 😅

@PalmiraBarbecue 10 месяцев назад

"Hey I'm looking for product recommendations to keep my car's paint protected and avoid stripping it during regular washes. After doing this process, Any suggestions for gentle yet effective car wash products?"

@honourvirtue3820 Год назад

Awesome as always 😎

@ChemicalGuys Год назад

Thank you! Cheers!

@JesusPerez-ik3jd Год назад

When polishing you should do the least aggressive step first to avoid an extra step if possible

@ChemicalGuys Год назад

Hi there! Yes, begin with a test spot to determine what pad and chemical combination would work best starting with the least aggressive approach.

@MrBikedrummer Год назад

Thanks for that comment!

@Earnyourday Год назад

Can I use this WHOLE LAYOUT to correct a ‘16 civic with parking lot scratches from carts and such also automated car wash damage to clear coat???

@ChemicalGuys Год назад

Absolutely!

@anthonymorales1178 Год назад

Do you prefer using c4 and p4 over your v-line polishes ? Which would give better results ?

@ChemicalGuys Год назад

Hey Anthony! C4 and P4 are great for moderate to light imperfections or when you are short on time. Use the V-Line for multi-step corrections of heavy swirls and scratches.

@anthonymorales1178 Год назад

@@ChemicalGuys what would be the steps using the v-line ?

@MrBikedrummer Год назад

Thanks for your question! Helped me!

@micheleevangelista9247 5 месяцев назад

What temperature do you recommend for doing all this?

@ChemicalGuys 5 месяцев назад

Hey! The surface of the vehicle should be cool to the touch without freezing.

@SgtHank-nq2ze Год назад

I see on the back wall a picture of Christine( 1958 Plymouth fury) being polished...whats the info on that picture ?

@ChemicalGuys Год назад

Hey! Thanks so much for tuning in. Yes, that is a photo of one of the screen used Christine Plymouths being polished before it was put on display.

@vinhlong7114 6 месяцев назад

Mình là người miền tây và đã định cư ở Hoa Kỳ được 35 năm vô tình nghe được bài nhạc nầy mình đã không kiềm được cảm súc hay quá ca từ mọc mạc chân và phương tuyệt vời quá A Páo đẹp quê hương Việt Nam ❤