How to Bind with Flysky Receivers - iA6, X6B, iA6B, Fli14+, GT3B, FLIT10 - FS-i6 and FS-i6X Radio

Подписаться 42 тыс.

Просмотров 103 тыс.

50% 1

You can now support RCwithAdam (and gain special perks!) HERE: ko-fi.com/rcwithadam 🤗
Visit my website here: rcwithadam.com/ 💻
Need to bind your Flysky receiver to your Flysky transmitter? This video is for you! I'll show you the two MOST COMMON methods of binding that will apply to almost ANY receiver! I'm using the FS-X6B and FS-iA6 receivers as examples for binding with the FS-i6 transmitter (AKA radio).
In case you're wondering what BINDING is, binding is like a "virtual handshake" between your receiver (Rx) and your transmitter (Tx), and is required before you can use the receiver. This way your transmitter will "remember" the receiver and automatically "pair" with it every time you fly.
*NOTE: My bad, GT3B is a transmitter and GR3B is the receiver.
Quadcopter receivers:
FS-X6B amzn.to/2ITlyeU
Fli14+ amzn.to/2MFmN2u
FLIT10 (not recommended)
Airplane receivers:
FS-iA6 amzn.to/2q90drk
FS-iA6B amzn.to/2ONohKD (my favorite)
FS-iA10B amzn.to/2MI3lC7
FS-GR3B amzn.to/2oIbnmw (good for cheap 3-channel planes)
Buy through these links to support the channel:
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
MY GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects!

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 175

@AndreasBaumgartnerMUC 4 месяца назад

Perfect sir! No unnecessary jadajada, straight to the point. Good job sir!

@taylang6101 2 года назад

This was great I would rank this number 1 of all RC tutorials. Keep up the good work!

@RCwithAdam1 2 года назад

Wow, thanks!

@PadiwanFPV 4 года назад

This helped me get my Fli14+ bound up, thanks Adam! Flysky and box goggles FTW!!!

@creeperjoypeqce7236 4 года назад

Thx man you made my day, thank god because of you I succeed on this😁

@lpkindle Год назад

I ask a question and forgot to tell you, you are the best I've found the explain how all this new stuff works. Thank you thank you thank you.

@RCwithAdam1 Год назад

Thanks for the feedback. My pleasure.

@smexybritishkiwi3206 Год назад

Thanks man, I couldn't work out what was wrong with my receiver but this fixed it. Great vid.

@itheblackwolfofmyfamily 2 года назад

Thank you man! it is been a week since I had this problem. Thank you so much!!!!

@treasureislandofworld 4 года назад

Love your Video ! It's so descriptive !!!!!

@robertpettifer6307 4 года назад

Thanks for the tip for binding ia6 receiver Cheers

@drlimacharlie5204 3 года назад

Awesome video and clear!

@daveerling8544 Год назад

This video really helped me out! Thanks

@SuperDisaster1 Год назад

very clear, thank you for the video

@IamAndrej 2 года назад

thanks man good video

@jimbob6063able 3 года назад

Great video! I still use fs-i6 with 10 channel mod. Do you know of any receivers with good range? I've tried finding one online but can't find anything suitable.

@your_china 3 года назад

Hi, please tell me. Which of these two receivers is best for the Sonicmodell Mini AR Wing? Ia6b or X6b? Dimensions and weight aside, which receiver would you choose? Thank)

@makeityourself9325 2 года назад

Thanks for your help. I have a question. Can I bind this receiver with a Taranis Transmitter?

@MARLIELEPPO 4 года назад

Could you make tutorial how to setup ibus on i6, you have video on i6x only! (for betaflight)

@reefercrazy1 3 года назад

please

@HM-ke1qm 3 года назад

For the 3 pin plugs on the receiver which side is for the black wire or negative wire?

@tplee2403 4 года назад

Hello there Rcwithadam thanks for your reply can I ask I have try the way you teach at the video but still can't work is that maybe I have already bind 1 reciver at transmitter so the transmitter refuse to accept the second reciver !

@pepper8048 Год назад

I'd like to see you do a video on how to properly install a Tarot (or comparable) retractable landing gear with the FlySky I6X and receiver. I'm having difficulty determining how to use one of the aux switches to operate the landing gear. There seems to be something small I may be overlooking.

@goktugkaplan3367 4 года назад

I have a question what will change if i change model ? And do i need to set up mu old setting in new model?

@mechanical1955 3 года назад

Great yours is the only one that works

@magneresjuan 2 года назад

Hello ! Great vid. I conect oposite voltage baterry to my fs ia6 receiver AND saw smoke... any ideas for the repair

@rossblackwell5594 3 года назад

I have a Flysky Tx & Rx but am having trouble getting servos to work after I have bound the Rx.Any suggestions would be appreciated?Thanks. Ross Blackwell

@HM-ke1qm 3 года назад

Which channel do I plug the left yaw servo into?

@98-24 2 года назад

Thank You!!!

@amirullaahad955 4 года назад

i guess now i know a bit how to use this with kopilot.great video!

@RCwithAdam1 4 года назад

Thank you! If you have any more questions, let me know!

@NSRBOY250 4 года назад

thank you for your help this helped me lots :)

@RCwithAdam1 4 года назад

You're very welcome!👍

@NSRBOY250 4 года назад

RCwithAdam I really appreciate it

@corygreen3710 2 года назад

I just followed your video, thank you for that. However I still can’t get my arris drone to anything, it won’t throttle up or fly. Do you have any suggestions ?

@titithierry920 2 года назад

Très bien expliqué, merci.

@simhalegend8283 2 года назад

Hi nice video about transmitter binding with receiver, but I'm facing solid red light problem in fs-CT 6B receiver, at first it will stop blinking but after disconnecting all connections it is not connected again that is solid red light, could you explain to how get solid light in receiver

@gregorydahl 2 года назад

I think we can use an old usb phone charging cord and phone charger to get 5 volts to power a reciever to bind it to our transmitter before we even have to put it in our drone or plane . The red and black wires are 5 v on a 5v phone charging cord . This might make it easier . Bind buttons can be hard to hold down while plugging in a battery with one hand if the reciever is mounted inside the model . So check the voltage with a meter if you try .

@gregorydahl 2 года назад

Adam do you know what subtype flysky reciever is for the purple flysky reciever ? I have a multi protocol tx12 tx . 4in1

@The-Warm-voice1359 4 года назад

hi bro how you done i watched this great video but i need your help i have radio control FS 10ch i6s white i use him on my rc truck with battery 3s 4200mAh 35c but when the battery is weak and the truck move slowly the battery still full on my radio screen i think she needs adjust from RX set up high volteg 6.0 alarm volteg 4.2 low volteg.4.0 i think she adjust from this settings until to reading right if you have any idea i hope tell me that thx dude

@jonjepson3650 4 года назад

Very well executed lesson thanks for going slowly and clearly

@RCwithAdam1 4 года назад

Thanks for the feedback!

@stryderding231 4 года назад

Eeeh wht's up doc, i have a TR624 receiver from Tactic and i want to connect it to an F4 or F7 flight controller ? which cable's (channels) or Pin's would i need to connect from the receiver to the FController

@annikinmendoza5757 6 месяцев назад

Does it matter what lipo battery it is or no because I was thinking of doing for the fs-16x controller to use a 6.4 volt battery to bind to the controller.

@maxonbartlett6507 2 года назад

thanks, that's helpful

@le_mon_tree 2 года назад

thx a lot!!!

@tomlatimer5001 2 месяца назад

Adam, to say I could use your help is a huge understatement. I bought a heavy duty, all steel hydraulic loader from an online auction. It came with no paperwork, no instructions, and I'm totally new to this. Upon playing around trying to figure it out, I could only get the bucket to raise and lower. thinking there must be a problem with channels synced between receiver and controller, I chose the factory reset option, big mistake I know now. Ive been doing a ton of reading, and watching videos, about all of yours, so I think I have a grasp of what needs to be done. Doing it not so much. everything i have watched regarding binding the two, the receiver is out of the truck, plane, etc. Can I bind the two with the receiver in the loader? taking it out looks problematic. I have made a jumper bind wire, put it on with heat shrink protection from touching the center terminal. Can I now bind with the FlySky FS-I6S? If so, how? The receiver is a FS-IA10B. 2nd question, would you be willing to help me set the remote controller up? I am reaching out to you here, I am new to this so not sure where would be best. I need help bad! And it would be greatly appreciated! Tom

@FpvBuildz 3 года назад

i really need help with my eachine wizard x220, when i bind it it doesn't send any signals to the receiver.

@michaelmitchell6898 Год назад

Do you know if there is anyway to bind this with UMX receivers? OR any other micro gyro receivers.

@AleksanderLucas 2 года назад

top man, thank

@rauldobroni4841 3 года назад

Tank’s yow sow much FOR this video Is working very well

@RCwithAdam1 3 года назад

Great! 👍

@tedwells3776 9 месяцев назад

Hi, Can I set up a second receiver to work with the same transmitter? 1 Tx to 2 Rx?

@technicalhackeryt5770 3 года назад

Hello bro are you online if yes then I wanna ask that can we calibrate when reacever installed on quad copter...?

@thetwogardens6048 Год назад

I have a Question . Are there any Flysky Receivers with built in Gyro for RC planes ? If so, which one ? thanks !

@overfly_pt 4 года назад

Very good 👍 😊 👌

@user-zr4hx3el6p 9 месяцев назад

I use a FlySky FS-i6X Tx and FS-iA6B Rx for my model sailboat. I would like to collect control data (PWM) using a second FlySky Rx connected to an Arduino and datalogger. Is there any way to simultaneously bind two receivers to a single transmitter? I also have FS-GR3E and FS2A=4CH receivers available. Thanks.

@andrewziegler2608 3 года назад

I have the same transmitter and receiver but my transmitter doesn’t say bind OK. it just is trying to bind and stuck on that screen no matter what combination I do of powering up what first

@peterkennethnuevo7969 2 года назад

Does the Fs-I6 support any receiver with gyro? I'm a beginner

@raiyanbashir1877 4 года назад

how to bind fs i4x(tx) with fs r6b(rx) im in trouble ! please help me

@smp_rc_2002 3 года назад

i have a microzone mc6c transmitter. Can I bind a flysky IA6b receiver to it?

@Awilson1218 3 года назад

Thanx Bro!

@michaelcoppola2550 2 года назад

Help! adam I reversed channel one on the controller now i can' t reverse it back . i have followed the instruction the switch looks flipped but its not. I am using this on a sailboat for the main sail control. Down should bring the sail in and up should let the sail out . i reset the controller defaults and followed your instruction to rebind the receiver.

@resadrecebli2263 2 года назад

İ have fly sky fsi4 and A6 receiver When i try to bind the slowly flashing red light not changing into steady light. Any solutions?

@gabrielgaytan4537 3 года назад

So what reciever you think is a good brand for the Protek 35 analog version? I also have 2 drones that need work.

@RCwithAdam1 3 года назад

What transmitter do you have?

@PolaNimuS 3 года назад

I've got the exact same receiver and transmitter. I'm not able to get the receiver to have the fast-blinking light when I have the bind cable and a 5V power supply plugged in. I'm able to get it to start binding to the point where the led will be blinking slowly, ~1 time per second, but the receiver never says "RXBind OK." I've been looking online for over 2 hours and haven't found anybody else with this same issue.

@MrSaccoccio 3 месяца назад

Adam I have a RTR truck that is all set up, but when I went to power up the radio it was junk. I bought another radio same model and style and went to bind the new radio to the same receiver and the receiver would not stay on.. something is amiss can you help please!!!

@hudmel5390 3 года назад

I have the Xiangtat Flysky FS-X8B Receiver and I bind my remote to it and go into beta flight and I go to receiver and I give throttle and nothing happens. Just build the drone tryo 79 anyhelp?

@johnlacking8240 4 года назад

how do i bind a umx ultrix to my flysky fs-ia6

@morinryudojo5225 3 года назад

I have a fly ski T6 remote and I'm trying to bind a FS ia6 receiver can you help me with this

@FloridaWildlife 3 года назад

Getting a bind but no servo action. I tried 2 different receivers and same thing.

@ranger175a2w 4 года назад

Thanks for this great video & whatever you do don't do what Tiger's RC channel is suggesting ...... you'll release the magic smoke from your receiver

@eddiemanuelitonavarro2622 Год назад

Can I bind my FS-T6 transmitter to my FS-iA6B reciever?

@ebsigma 2 года назад

hi, i hav a FS-i6 controller, i want a full kit to use the controller and build cars and planes and whatever comes to mind with the 3d printer and such... I know that FS-iA6 or similar is needed, but I would like to know what other components are needed (battery and its charger, something to be able to put an fpv camera... and others. thz

@ville619 3 года назад

In IA6 the reciver light is flassing fast only if i turn binding on in transmitter. I dont knov what to do. HELP ME!!!

@rccvs4355 4 года назад

Hi, what battery did you used to power the receiver 2S 7.4v ? That receiver take only 6.5v, will it damage it ?

@RCwithAdam1 4 года назад

Hi! The battery is 2S, but it is connected to the ESC, and the ESC is regulating the output voltage to a constant 5v (using a built in Battery Eliminator Circui (BEC)).

@ltcolsin2025 Год назад

I knw the video is 2019 but my power supply is a Li-poly RC Battery 7.4V 8C 2000 mAh, and the wire lay out is red- white and black so is that going to be a problem?

@dextro6416 2 года назад

Will FS i6 Tx bind to FS CT6B Rx?

@Mythril_294 3 года назад

How to apply x6b receivers to apm?

@bipinmoharana464 2 года назад

Sir. can we bind fsia6b rx with ct6b tx.......?

@mrsparkles5294 4 года назад

Are bind plugs universal or brand specific? I lost the one that came with my transmitter and need to find a new one. =(

@jonathanjones6197 4 года назад

Universal.

@abdullahom8390 3 года назад

how i can contact omphooby m2 binding with my flysky i6x ?

@Bigbopperairguns 2 года назад

I don't know what mdole I'm saposto to pic fro a ZMR250?

@jugnoo_official9438 4 года назад

Hi i want to build a drone f450 with the flysky x6b and apm 2.8 plz help me out right now i have purchased everything for this project but just apm is remaining to buy

@RCwithAdam1 4 года назад

Hi! Great! But I'm not sure what apm 2.8 is?

@_djordje 3 года назад

I did exactly what you did here but smoke started coming out of the receiver when I plugged the XT60. What battery are you using? I think I am using the wrong battery.

@RCwithAdam1 3 года назад

oh no! It shouldn't have anything to do with the battery if you plug into the ESC 5v servo connector.

@lpkindle Год назад

Will it bind to my spectrum receiver? And do you have to have a motor controller?

@RCwithAdam1 Год назад

Hi! Just now saw this. No, this will not bind with Spektrum transmitters. And no, you do not necessarily have to have a motor to use this setup and control the servos. But if you don't have the motor esc to power the receiver and servos, you will need a seperate voltage regulator to power the receiver and servos at 5 volts.

@sl_gamingworld5125 2 года назад

How far is the signal? X6b receiver with fs i6 transmitter pless replay bro

@petertebo914 Год назад

i have a boat i have a transmitter for fs gt3b and wont bind

@matejhlaca5171 Год назад

I have bind the same receiver on model 1 and model 2. How to remove receiver from model 1? I tried "model reset", it reset all the settings but the receiver still conect to model 1.

@RCwithAdam1 Год назад

As far as I know, that model profile will stay bound with that receiver until you bind it with a different receiver.

@djisboredgames9661 4 года назад

I tried adding a bind key but it didnt work

@TigraV16 3 года назад

So I can bind a fs ia10b with my taranis x9d plus ?! Thanks

@RCwithAdam1 3 года назад

Hi! No, Flysky receivers can only be used with Flysky radios (or multi-protocol radios like the Jumper brand), and vice versa.

@kevinmacalpine9326 Год назад

Can I bind a fs-ia10b receiver to a fs-t6 transmitter I've tried your way a few times and didn't work

@RCwithAdam1 Год назад

Fs-T6? No. The T6 is only compatible with the older AFHDS radio protocol while the ia10b uses the newer AFHDS2A protocol. Here's a link to flysky's website where they show all the receivers www.flysky-cn.com/receivers

@williamhundley6536 3 года назад

I'm going crazy! Need help! I bought a new eachine cinewhoop. I had a Flysky i6 transmitter and I bought a Flysky x6b receiver. I can't get the bind light to even come on. I've tried several things. Do I even have the receiver plugged into the flight controller correctly? I just used the already attached wire from the flight controller and plugged it into the x6b ibus port. The receiver gets very hot and does not bind. Please help! Thank you!

@RCwithAdam1 3 года назад

Hi, William! Email me some photos of it to RCwithAdam @ Gmail.com and I'll do what I can to help.

@williamhundley6536 3 года назад

@@RCwithAdam1 thank you so much I will do that!!

@alxmusic666 3 года назад

Need i to install the whole adapter into the drone? Im need to fpv help😞

@RCwithAdam1 3 года назад

Hi! What quad do you have?

@lucadagani9434 11 месяцев назад

Ciao volevo un informazione.... è possibile accoppiamento tra TX fly Sky e RX radio link Mi puoi aiutare grazie

@Naru07 3 года назад

do these receivers work on the FS-I6X please help

@RCwithAdam1 3 года назад

Yes

@gustavgans2943 4 года назад

Work it wit the XSR

@Natecx 3 года назад

Hey Adam, Im trying to bind my frsky r-xsr with my flysky fs i6x. The r sxr wont go into bind mode. When plugged in with a lipo and bind held all the red green and blue lights are solid, all on. I have my flysky set to PPM and SBUS. What am i doing wrong ?

@RCwithAdam1 3 года назад

Hi, N7! Unfortunately FRsky and FlySky are not compatible brand (They use different radio protocols).

@Natecx 3 года назад

@@RCwithAdam1 dang. my mistake. thanks for the quick reply man, you rock

@donnieeudy4745 3 года назад

Will any frys ky recevers work with this radio?

@RCwithAdam1 3 года назад

No, only Flysky brand (or aftermarket receivers that use AFHDS 2A protocol).

@MARLIELEPPO 4 года назад

Preferably in combination with x6b. :)

@fucaesarsalad5780 4 года назад

Hey rc Adam I have a problem with my I6x not binding with a plane of mine I don’t know what receiver it is but I can’t take the receiver out to see. the plane does have a remote that came with the plane. The Plane it’s really small and has a really small receiver. The plane called volantexrc it’s a beginner plane. If you ever see this comment please help me with this it would be very helpful

@RCwithAdam1 4 года назад

Hi! Sorry for the delay! Is it still not working?

@fucaesarsalad5780 4 года назад

Ya it’s still not working but thank you for getting back

@CarminesRCTipsandTricks 3 года назад

I've been watching a few of your Videos on the FlySky FSi6 Radio, which I'm brand new to. 😖 I have a second FSi6, that I fly my Foamies with (sorry!! Not a hardcore Flyer 😋). This one in question, I'm using for 1/14th Scale RC Semi Trucks. In the Video, you said that I could Bind any FlySky Reciever to this TX! What about a THREE Channel? I've got the i6B in the Truck itself, but I also want to operate the Lights, Signals, Brake Lights - on the Trailer - wirelessly, with the 3ch Reciever. 😳 Now, Binding two RXs simultaneously to one TX is the easy part for me... Both sets of Turn Signals will run on Ch 1, and the Brake Lights on Ch 3. ..... I don't NEED 6, 8 or 10 channels in the Trailer, obviously. Will a FS GR3E Bind to my FSi6?? Your Videos have been invaluable so far!! 👍👍

@RCwithAdam1 3 года назад

Hi, Carmine! Yes, you can use the GR3E rx! But you have to change the rx setting for that model profile to the older AFHDS protocol, as you can see in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Rj0ndZxJ7is.html .

@maklimahbiadap 3 года назад

is this fs i6 can bind with other receiver?..

@RCwithAdam1 2 года назад

Yes.

@GHOSTEDFPV 3 года назад

How can connect betafpv X85 V2 cinewhoop to flysky i6?

@GHOSTEDFPV 3 года назад

Pnp

@KrishPatelofficial 4 года назад

Could you tell me how to connect FS-iA6 with PIXHAWK 4

@RCwithAdam1 4 года назад

Hi! Unfortunately, no. I don't have any experience with the PIXHAWK 4.

@KrishPatelofficial 4 года назад

RCwithAdam Hi, can FS-iA6 GIVES PPM OUTPUT CAN I USE PPM ENCODER TO USE IT IN PX4 if you know that by any chance .!

@stsrosebp1571 Год назад

Hello can I bind a flysky receiver with a taranis?

@RCwithAdam1 Год назад

Hi! No. Unless you are using an aftermarket multi-protocol transmitter module in the Taranis.

@miguelpeters4520 2 года назад

Hey anyone, I'm having some real difficulty getting my X6B receiver to bind with my FS-I6X, I think I've got all settings correct in betaflight and the transmitter but they simply don't find each other. Any help would be greatly appreciated.