How to Build Simple and Easy Drawers (Part 2) 

Special personalized gift for Mother’s Day gift for Mom. It is especially memorable when the gift is handmade

You are singlehandedly responsible for giving me the confidence to build my own shop cabinets. Thank you so much my friend.

Thanks Paw Paw! Your videos have a nice easy flow and I appreciate that. All killer no filler thank you!

Making it look simple, going to be a good looking cabinet when finished !!

Glad I found your channel. Love the content and detail.

Just found your videos while researching cabinet making. Thanks for calm, clear and easy to follow videos. I've watched countless others who make the same process so complex! Thanks again!

Thanks for making these videos, I plan on making cabinets for my garage as part of my workshop setup and this will help a ton. I especially like that you took the time to draw measurements on a whiteboard to crystalize the measurements needed for the drawers to fit in the openings, that was a nice touch.

Great video as was part 1. If only we could get such clean timber/lumber in uk..... thanks for sharing your meticulous and clear project.

Very straightforward and to the point. Thanks for sharing

Going to watch alot of you're videos I have alot of cabinet to build on my remodel thanks for sharing you're craftsmanship

Well done sir, I am glad I found your channel. Very down to earth.

Elegant presentation. A credit to youtube. Excellent

Thank you for teaching. Appreciated.

Great videos. I'm going to follow your instructions to build some small cabinets in my small workshop.

Excellent work

Great tips and a great video as well. Thank you...

You are an excellent instructor.

Nice videos and you explain things well! Thank you!

I've watched both parts and I don't think anyone else has as simple a design as yours. Your design was simple and easy to follow and understand. When you attached the support for the floor on the upright walls I thought to myself why didn't I think of that? And I've been tossing & turning cabinet designs in my mind that was as simple and elegant as yours. You beat me to it. Your explanations were extremely clear and the close ups were very professionally done. No wobbly hand held shaky videos here. Hey thanks for putting this up I really like the way you presented this entire video.

Simple and yet so professional. Thanks paw paw

I'm so happy and glad I found ur channel! I like ur techniques!

Love you videos. Careful, precise work with succinct explanations. Good filming and lighting. I was happy to subscribe just now.

This was so helpful. Thank you for this amazing video

Love your videos. Easy to follow. Wish my shop was like yours.

Excellent presentation and work. We appreciate that you are helping those who want to learn more about woodworking. A lot of sacrifice, time and work involved in producing these videos is not easy, again thanks.

Great videos. Directions are clear and to the point. Thanks for your military service and sharing your talent.

Great job !! 👍

Wish I had found your site before I constructed the kitchen cupboards at our cabin.

Thanks very much for the instructions.🙏

Im speechless, you make that look easy God bless brother! Looks great!

This was wonderful to watch. Biggest lesson I've learned after attempting to build a cabinet: My "skills" with a skill saw aren't good enough to get things perfectly square. I need a table saw.

Great detail and explaining every step

Both your cabinet videos are the best I've seen on the subject.

Very good craftssmanship.And so nice to see someone working in inches,at last.Thanks for the tips

My wife and I are just getting into wood working. Really enjoy your channel. Lot of great content. Keep up the great work!!!!

Thank you Sir. You do really give us information on how to do this, just fantastic and awesome. You make it look very simple and ease. But at the same time share your knowledge and skill how to do this. Thank you Sir.

Forgot to comment on the cool fishing plaque. It looks nice, yes i would rather be fishing.

Awesome craftsmanship.

You are ORSOME. I LOVE wood work thank you for the grait videos

Very detail. Great work.

Thanks for your response. I have had my three car garage for 35 years. Never put a car in it. It us my shop. My man space. It's really nice, but I wish I would have bought a CNC machine a long time ago. Just retired at 71 and love wood working, remodeling and electrical work. Nice talking with you.

Like the way you explain everything...

Pretty good man...I am Brazilian and I love your videos

Great video

Great video. For our home I substituted 3/4” Red Oak with solid wood cabinet and drawer bottoms and aromatic Cedar veneer along the walls..(keeps mice out which is a big deal living out in the country). It was interesting to see non-dove jointed drawers. But nice fit. Your measures are spot on. It’s a pleasure to watch a true craftsman, thank you!

i like so much yours videos and your work . thank you for the videos

Great vid Paw Paw as always!

¡ Todo un maestro , gracias por compartir du conocimiento !

Great video, well done thank you!

Felicidades por éste video. Aprendí mucho. Bendiciones.

..Good¡¡¡...Very good video¡¡¡...thanks for sharing..it help so much👍👍👍👍👍

After I saw. I think I can build thank you so much

Thank you for sharing your skills you are awesome

Thanks again Paw Paw👍🏼

Very very good

great job sir

great videos! thank you.

Very simple and excellent 👍👍👍

You’ve gained another subscriber Learned a lot great work

awesome thank you paw paw i have learned a lot from you thank you so much for sharing.

Great videos, sir. Happy to subscribe.

nice job grandfather..!!!

You need to improve your drawers! Turn the corner joints so that your nails are sideways to the direction of pull or at the least slant your nails in different directions to resist pull-out. Up until this point you've impressed me. I will continue on because how you've done everything else.

Awesome thanks

Can't wait to be a pawpaw

Great channel, Just found you and already hooked lol! Good job!!

Beatiful work buddy

you did a great job.

Well done, very nice drawers in a good and mostly easy way. I like your channel and of course a thumbs up. Greetings from Germany

good job .I like your videos

Great video sir. Keep it up

Harbor freight built work shop. Love it.

Great vids! I'm a new subscriber. Look forward to more.

done good look good thank you

Nice 👍🏼👍🏼

Great project/presentation. TKSLEE

I love your show

Yes that's a great way to build base cabinets ... I build mine the same way .. I just use red oak four my fronts and railing not pine .... Kreg system the best way build the front too ... Really the only way ...

I wanna see the finished product . awesome work

Great video. New to your channel, I enjoyed your teaching technique. I did subscribed to your channel. Thanks for making a great video.

Just subscribed. I am a new fan.

Paw Paw has an X-carve!

Liked mr paw paw

God Bless this true American

I wish I had your ability, it probably takes a long time to become that good. Thanks again!!!

Enjoyed watching your 2 videos on "Easy Drawers". Would you mind sharing the information on your drawer slides, Thanks!

Hello Paw Paw, I am rehabbing a house built in 1893, tore out every piece of lathe. Thanks for these videos, and I subscribe, looking forward to viewing your content

Great full for your vedio

Your good

Thank yooo so much for this! My kitchen fell apart and I needed to learn how to build cabinets in a HURRY! And since I don't know what I'm doing...I needed EASY. I can't afford hardwood so I'm goin with select pine like in your video. It won't warp over time, will it?

Woodprix is a solid company with solid woodworking plans.

thx

Good videos. Do you finish the inside of your cabinets at all? I would think it would be easier to do your painting before you install your drawer slides

🇬🇧🇬🇧👍

I'm getting ready to build my bathroom vanities and yours is the best video I've found on the process. Everything is very clear. However, I have 2 questions: 1) Do you have a final materials list for what you built, and 2) how much time did it take you to build?

What router bit did you used in front drawers?, New suscriber watchung your videos, i love how simple and nice you explain everything.

Easy n Simple - nothing overly complicated for us to think it takes rocket science to build these. 😅

Americans "go ahead" and do everything😁 Really good job btw. Thanks for the video.

Thank you for these videos ! I will be making my first cabinet this week ! just have one question about your jig you built out of plywood to cover your table saw ! what is the reason for it ? does it keep the saw dust from coming back in your face or another reason ?

If you had an odd situation where the drawers were almost 48” wide Would you use half inch for the bottom ? Or would 1/4 still be fine ?