How to build your own custom ITB intake manifold

Подписаться 24 тыс.

Просмотров 192 тыс.

50% 1

Lets be honest, 98% of us just want the ITB noise under our bonnets, without having to spend thousands of dollars. Today im going to show you how to make one on a low budget.
THANKS FOR WATCHING CHECK OUT SOME OF MY OTHER VIDEOS BELOW
WORKING ON MY TWIN ENGINE CAR • Working on a twin engi...
ITB ARE ON THE CAR AND RUNNING • ALL MOTOR 5EFE ITB STA...
JB WELD INSTEAD OF A HEAD GASKET? • I used JB WELD instead...
Follow me on INSTAGRAM / eviltwinep91
This setup was build for a 5efe/4efe engine. The same concept can be used for any other 4 cylinder engine. Hopefully this video will give you some ideas and also help me develop them even further.
Follow me on INSTAGRAM / eviltwinep91

Авто/Мото

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 368

@MattBerrymotorsport 4 года назад

AFTER ALL THIS EFFORT DO THEY ACTUALLY WORK?? I have posted two great links below, one is of the car driving with the itb's. The other link is me making a custom air box for them. Guaranteed not to disappoint :D please consider SUBSCRIBING! Driving with ITB - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lzXDef-9KgA.html Custom air box - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aW5h6uejErQ.html Follow me on INSTAGRAM instagram.com/eviltwinep91/

@r.a.p.k.models4160 4 года назад

Dude you are a general ✊⚑⚑

@dunkthebomb 3 года назад

Any more info? Anything you would change or do differently?

@MattBerrymotorsport 3 года назад

@@dunkthebombI ended up making a set of adjustable linkages instead of the flat bar you see in this video... also switched from tps mode tuning to MAP sensor by using a vacuum line on each runner going to a balancer box from ebay ($30) Made tuning a lot easier

@IRONGUS__ 3 года назад

Hey Matt, this is awesome! I am currently working on a ITB(from a BMW V8) setup for my C4 Corvette. I was kind of “stuck”, thinking only about one setup option. After watching what you did it opened my mind. I will follow exactly what you did(because you showed us it works!!). It is Saturday, 11pm, I am super happy that I found your video, it made my day! Thanks 🙌🏻!

@BoostedPastime 4 года назад

This is exactly what engineering is all about.

@MattBerrymotorsport 4 года назад

Not calculated at all, yet still works lol

@BoostedPastime 4 года назад

@@MattBerrymotorsport It isn't stupid if it works. It pains me to see people put down good ideas because they are executed poorly, not everybody has a machine shop with a multi axis mill. If it works and is done poorly then is it really done poorly? Personally I would do it. I am planning on welding GSXR throttle bodies to a Honda intake so yeah. Love the video.

@jackryan4313 Год назад

@@BoostedPastime is that... possible? Wtf? How'd it go?

@eshwargoolcharan9344 2 месяца назад

@@MattBerrymotorsport I was thinking of doing one for a rb20

@askannav2094 3 года назад

When i saw the thumbnail for this video , my mind just thought these were gonna be bike throttle bodies.. then i started watching the video & i was blown away, never in my mind would i have considered using 4 standard throttle bodies together .... this is brillant! Well done

@__420_bandit__ Год назад

3 years later and you're still helping people 👍

@MattBerrymotorsport Год назад

We love it

@carl_marks1626 3 года назад

That linkage is well made. Everything is well put together there.

@Mac_with_the_lsx 3 года назад

This is what car videos supposed to be like!!!!

@Paul-ex2bz 2 года назад

Awesome job mate!I've got a set of 4age itbs that I'm trying to adapt to a honda k24. This is exactly what I needed. Thanks

@belovnino66 3 года назад

Ovo je materijalizacija, onoga sto sam zamislio... Svaka cast majstore! 😃

@AMCProduction 4 года назад

Definitely bookmarking this one!

@Ricerguy 4 года назад

This is genius, love the enginuity.

@kyleolin3566 3 года назад

I see what you did there

@simonissac8978 2 года назад

I dont mean to be so off topic but does anyone know a method to log back into an Instagram account..? I somehow lost the password. I appreciate any assistance you can offer me.

@denveralan4663 2 года назад

@Simon Issac instablaster ;)

@simonissac8978 2 года назад

@Denver Alan Thanks for your reply. I found the site through google and Im in the hacking process atm. I see it takes a while so I will get back to you later with my results.

@simonissac8978 2 года назад

@Denver Alan It did the trick and I actually got access to my account again. I'm so happy! Thanks so much, you really help me out :D

@GAMERWITHAHEMI 8 месяцев назад

You sir are a genius I was about to spend like 400 bucks on ebay to get an adapter plate made but to find that I can do this instead is amazing I have a 94 Corolla with a 4afe and ever since I got this car I wanted itbs. And to think this is all I had to do thank you

@MattBerrymotorsport 8 месяцев назад

Legend. Good luck!

@jotarokujo6729 3 года назад

I was just to about to spend a lot of money for a set for my celica . This is great thanks for the video !

@lloydrmc 2 года назад

Well done! That is a truly elegant design and execution. A suggested refinement would be to make the relative position of each throttle pin in relation to the actuator bar, so you could balance them precisely.

@chriswhite6546 Год назад

+1 for this. Being able to sync the itbs together is critical to a good tune. Multiple ways you can do it, but the logical way would be to fab the linkage out of all thread and use nuts fore and aft of each butterfly pickup to control sync.

@benjaminkruse8305 6 месяцев назад

You are insanely talented mate! Phenomenal job 👏🏽👏🏽

@gemini3558 4 года назад

Dam Matt , when I go down to the wreckers the first thing gone on them is the throttle body !!! Makes sense to me now hehe haha lol 😂 😜👍🇦🇺

@Tilpants 3 года назад

Nicely done Matt!

@Ed.Incierto 4 года назад

This so amazing! Thank you for this, stay safe!

@MattBerrymotorsport 4 года назад

You too Edward

@RetroCarsReborn 3 года назад

I think this will solve my problems with my 1zzfe to rwd good video

@jdmjedi777 4 года назад

Cool video man. I have a Similar one showing how I make them for honda motors. Been using bike throttle bodies with good results.

@SuperWepawepa 3 года назад

Incredible work!

@barrie411 Год назад

Very creative fellas. Very creative.

@antwanvandenbiggelaar5141 Год назад

Nice video! Going to try the same method on my 2e-e engine

@ForeignShredder 3 года назад

I've been trying to figure this out for my E90

@emphiaz 4 года назад

This is nice. Thanks for sharing. I'm thinking about doing the same thing for my qr25de. Only thing for future reference, headphone warnings if you're using that loud whistling music.

@MrComa12345 4 года назад

awesome video, makes me wanna do it myself for my e30

@MattBerrymotorsport 4 года назад

E30 would be cool!!

@elianramirez3391 3 года назад

Thanks for this, i'll try to do the same for a Zetec engine

@markjmaxwell9819 3 года назад

Very cool I thought about doing three throttle bodies on an XU1 manifold for a holden 202 ....

@mohamadnabil5812 4 года назад

Amazing. This one inspired me.. Thanks bro.. Im surely will ask u if got a question 👍👍

@jesselee4405 3 года назад

Awesome project. Good work bro. Did you notice any performance difference?

@irabrook 3 года назад

Very impressive build!! I'm building a 4age using itbs as well

@savagesock3598 3 года назад

Wouldn't this basically suck dirt into your motor tho?

@Brocktimmers 5 месяцев назад

@@savagesock3598you put a filter over it

@carlosarce6352 3 года назад

Nice work mate.

@mzappas 3 года назад

Great work bro! Very creative

@MattBerrymotorsport 3 года назад

Thanks man

@briancavanagh7048 3 года назад

Matt What did you do for wiring up your itb ? Are you on the stock ecu? Stock injectors? Upgraded fuel pump?

@jononame8915 3 года назад

cool work you should look into aluminum brazing.

@danielzuniga847 3 месяца назад

What vehicle are the throttle bodies from? very good work!🙌🏻

@kool-aidsphuckery9596 3 года назад

Finally a DIY to make an ITB setup for my 1uz.

@propaneblanco5373 3 года назад

Tell me how it goes

@kool-aidsphuckery9596 3 года назад

@@propaneblanco5373 I’m trying to source a sub 800.00 piggyback or aftermarket ECU since the MAF will disappear

@benyvonnemckenzie6576 3 года назад

Megasquirt

@fredrenault3855 4 года назад

Did you need to retain a lot of vacuum from the original single unit t.b? I showed this to one of my friends for some tips cause i really wanna do this on my corolla and hes talking about a vacuum block for the fuel pressure regulator.

@twincam16seca 4 года назад

Want to smash the like button more than once 👍👍👍👍👍👍 I need to do this with my beams!

@irabrook 3 года назад

Not sure if you know already but there's kits available to adapt itbs from 20 valve 4age to the Beams

@twincam16seca 3 года назад

@@irabrook absolutely already know that, there's not that many bt 20v throttle bodies available and why would I use them on a 2L motor when they're designed for a 1.6L? I know they "work" but surely they aren't the ideal size for a beams

@motorsportsdhakabd8867 4 года назад

Boss a great thank you, boss we want more details guide diy itb build , love you

@ringrolla4594 4 года назад

You are a very sick man!!! I Love it!!!

@MattBerrymotorsport 4 года назад

Thankyou mate

@RestorationAustralia 3 года назад

Nicely done.

@dadstoygarage1878 3 года назад

Nice work!

@jHftw 3 года назад

I'm building a 4age 16v with itbs and I think I may have to do this! Thank you!

@MattBerrymotorsport 3 года назад

Hell yeah brother i just got a 4age myself and want to get the itbs on too, the noise is awesome!

@jHftw 3 года назад

@@MattBerrymotorsport awesome! Yeah I cant wait, I'm building an aw11 up like the 80s Trd ae86 n2 cars, so trying to get the engine close to that

@matthewk9563 10 месяцев назад

Starting up a Locost build with a Duratec 2.5, may take a crack on DIY ITB's Given the cost of the kits, I might give it a try with the help of 3d modeling and SendCutSend for custom plates

@renz1013 3 года назад

Im gonna dowload this if ever I get to a time I can build my own engine

@TuningCustomUpgradeCarParts 4 года назад

I love you boss, you are awesome, it was very helpfull for me, respect you sir , pls we want more, my car is starlet ep82

@qrs3658 3 года назад

nice idea. i will like to see someone try that with a honda j35 engine

@electricpunch9530 2 года назад

On the throttle bodies how did you make that bracket to sync all 4 of them together when you pull on one of them? Was it an OEM piece you just drilled into or was it fabbed up too?

@petergreaney1328 4 года назад

Gotta love trumpets

@israelramos9745 4 года назад

Good job guys. 😎👏👏👏

@chosen7778 Год назад

Looks good just needs a good PNP port matching job and did you say that was 7AFE engine it looks like If so that's so cool I have one of my 25th anniversary that I'm gonna try to mess around with before I go V6 walk

@SpeedHero 3 года назад

Cool thinking!!

@2kbaby924 2 года назад

thanks for the video awesome job

@TheBobberVlog Год назад

Love it!

@MikediFazio 3 года назад

Awesome. Any videos if it running, or pulling?

@MattBerrymotorsport 3 года назад

Lots on my channel :)

@Timroycampbell 2 года назад

Matt can you help me what can I used to replace the distributor with for a camshafts sensor segnol

@mikepowers572 3 года назад

great idea, using the throttle bodies. the mesh in the stacks kills flow bad, find another way to filter it.

@FishzWorld 4 года назад

Really 😎!!! Future plan thanks...

@watahyahknow 4 года назад

nice idea , be cheaper then using hyabusa motorcycle trottlebodies (there larger too) or adapt some bmw ones , you still want some adjustment between the trottleplates to get the vacuum right between all the intakes , it still should work as is though

@MattBerrymotorsport 4 года назад

Yeah I've since gone to adjustable rods 😊

@dillonpinto5157 3 года назад

Will it have any issues since there are no individual vacuum hoses on the throttle bodies?

@mitch9521 2 года назад

Hotrodding on a budget, I love it.

@prafdinsteleverzi 3 года назад

Really cool. But what I never understood about this system is what happens with all the impurities that get sucked into the intake, dust and all that. Sometimes when I change the intake filter in my car i literally find sand in there that gets sucked in

@MattBerrymotorsport 3 года назад

Read top comment, I made an air box with an air filter

@nishaanrughubar6277 3 года назад

Great concept! Well atleast if the fuel injectors are directly on the cylinder head like on the 5EFE. This will not work for example on a 4AFE were the injectors fit on the intake manifold. Any thoughts??

@MattBerrymotorsport 3 года назад

Buy the weld on injector bungs and put the rail wherever you like

@perminuskariuki264 Год назад

That's great. Do you have some for sale? I don't have the tools to do that job.

@ArmandoMejiavergonisimo 4 года назад

Man what a nice setup, I've got a 96 Tercel with the stock 5efe second gen, I'd love to have an n/a build, would you recommend this engine or the n/a 4efe which I can get for cheap and swap it myself

@MattBerrymotorsport 4 года назад

Hey thanks Javier, they are a bit overkill for size, but still they sound fantastic and were pretty cheap to put together. the second gen 5e don't have very thick rods... they will rev to 7000 all day every day, but if you want to run more rpm than that, go for a 1st gen 5efe with the thicker rods... If I was to do another one, id probably do a 4efe so I can rev it a bit harder... anyway I had to start somewhere so lets see where it goes lol

@DonPeriRD 3 года назад

Hey 👋 Panamá. Lo hiciste?

@nadimmaher4640 4 года назад

Great build, keep up the good work ! Can i ask where did you get every single throttle body from? And what is its price?

@MattBerrymotorsport 4 года назад

I have a lot of spares at home. the only parts I had to buy was the trumpets/velocity stacks... they rest was just parts and things I had lying around

@nadimmaher4640 4 года назад

Oh okay, thanks for the reply !

@Rexracerubtchs 3 года назад

Thinking of doing this to the 2j in my is300

@MattBerrymotorsport 3 года назад

Man that would be awesome. Ive never seen a itb 2jz. Great idea

@Andrew-hh3ol 3 года назад

I think I’m gonna work on a functional hood scoop direct to the air box , won’t be much more power but then my motor won’t be trying to have air , it’ll take when it wants

@MattBerrymotorsport 3 года назад

I made something similar, it works great. Maybe this link will give you some ideas. Good luck with your build ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aW5h6uejErQ.html

@Andrew-hh3ol 3 года назад

@@MattBerrymotorsport thanks

@zachmiller9175 3 года назад

Giving me ideas for my k20... I wonder how hard it would be to get 4 TBW throttle bodies to work together.

@afroman5531 3 года назад

K20s are electric throttles right?

@JO3haNsum 3 года назад

Do those screens do a good job in protecting the engine from sucking in debris?

@marceygeorgexiong866 3 года назад

Hey buddie, I noticed when you said you used 2 manifolds and just had them machine to the runners. One must be the manifold to the head but what about the 2nd one before you slap on the adapter plate.

@saifel-eslamal-labban2163 2 года назад

An amazing video man Thank you for these I thought it might be complicated or hard but never in my life thought of doing that *i know about the bike ones* Thank you

@MattBerrymotorsport 2 года назад

Glad you liked it!

@Ricerguy 4 года назад

You should try tuning without the mesh "filtration" from what I've seen mesh in the intake stream disrupts flow and kills power, without those trumpets you have plenty of room to build a plenum which could utilize the oem ducting and filter. Just a thought :)

@MattBerrymotorsport 4 года назад

We tried it without the mesh, made less than 1HP difference. I think id rather lose the 1hp rather than a rock going inside lol. so was 133 hp build with a turbo or just N/A?

@Ricerguy 4 года назад

@@MattBerrymotorsport no turbo, I've always been n/a. I'd suggest a flow test then maybe, i think another youtuber did a dyno with and without a similar mesh and lost a fair amount of power. I was suggesting you could use an oem cold air setup and filter by building a plenum to keep the debris out and duct in cold air via the oem filter.

@MattBerrymotorsport 4 года назад

@@Ricerguy 133 HP from stock 5efhe cams?

@Ricerguy 4 года назад

@@MattBerrymotorsport 5efhe cams (set to the 4e timing mark retards the valve timing 2.2degrees approximately and shifts the powerband higher up.) Yes.

@bye_go8465 Год назад

I'm gonna do this to my sr20 but the fuel injecter holes are on the intake manifold

@brysonw2952 3 года назад

Thanks for sharing

@zeroswings2 4 года назад

that's very cool and I don't want to detract from what you've done but... maybe blending out the holes between the various flanges to make a smoother transition would be better... still nice though

@MattBerrymotorsport 4 года назад

You are 100% correct. It all depends on how much time people want to spend on it. It's all done now though 😁

@EmilioShack1982emilioRoman 3 года назад

Should have flipped it, so the throttle cable is on top of the itbs not below. Like the stock 4AGE 20v have them. I have a 92 Celica st with the first gen 4AFE engine looking into a complete 4age 20v swap or adapt the 20v Silvertop ITBs over. Now with this video I'm encouraged to make custom itbs.

@MattBerrymotorsport 3 года назад

Yeah I looked into this, the problem there is the linkages don't clear the fuel rail. Great idea though :)

@E-boytunerz 2 года назад

Hey man is there a way i can talk to you. I have a 5a-fe and finding itb vids on it are very hard i notices yours is a 4 a cld you maby give me tips and what i have to do for an itb setup on my 5a

@fbffortysix 3 года назад

i want to put itb's on my 318is e36, the problem is that i don't know what throttle bodies i should use and i really don't know what to do with the tps sensor and the flowmeter, do you know how can i find what type of throttle bodies i should use? and what do i do with the sensors?

@blackduck5726 3 года назад

Nice work,,😁

@Racing-DiY Год назад

What throttle valve? Of from model Car to the modifi itb

@charliehustle2579 4 года назад

You sir are a genius! Been wrenching for twenty years and I would have never thought of that. Quick question are those the factory throttle body that's meant for/ or comes in that engine?

@MattBerrymotorsport 4 года назад

Hello thankyou Charlie. Yeah they are the factory throttle body x4 . That way I can use the factory TPS, plus I had a lot of spare parts to make this

@kool-aidsphuckery9596 3 года назад

I found that you can also try to use motorcycle throttle bodies. Especially if you are going to have to use an aftermarket ECU or piggyback

@shhhdontshout 4 года назад

Are anything related to the great allen millyard?

@cre8tivegarage157 4 года назад

Nice video , keep pushing and building we look forward to more content

@aqilfowler2728 2 года назад

Is it possible to do this to a 2009 VW Golf GTi 6?

@svrider2006s 3 года назад

I’d be curious to know if a standard cable and pedal will pull all of them. I suppose you could add a spring for assistance. Very cool setup and video!

@MattBerrymotorsport 2 года назад

I removed 2/3 springs off each TB. The pedal feels a tiny bit heavier than standard but i barely notice. Using all of the factory return springs makes the pedal quite tough

@svrider2006s 2 года назад

@@MattBerrymotorsport I plan on doing a similar setup to a 92’ GTI 16v this spring

@elcascoviejo5347 Год назад

@@svrider2006s how it it go?

@christiancianflone1740 4 года назад

number 1!

@Shadowdarknessone 3 года назад

pretty nice video. but i have 2 questions arent these throttelbodys a bit too bid or is ther no such thing as too big for power gain. And do you run a stock ecu. i mean. you get now much more air in there? can the ecu handel it?

@MattBerrymotorsport 3 года назад

Hi there 9/10 people tell me they are too big, but it makes more hp with this than the stock manifold so im pretty happy about that. I think the only reason for this is the stock intake manifold runners are actually smaller than the actual head port, no wonder lol I haven't run these on a stock ecu before, in my case with the smaller runners I dont think it would run too well. We are putting together a manifold for a proton jumbuck ute using the stock ecu, keep an eye on the channel, hopefully it works

@erickotapish635 3 года назад

I have seen this when I was a kid a long time ago..they used motorcycle throttle bodies....to a Honda....that thing was fast

@MattBerrymotorsport 3 года назад

Hell yeah that's cool as :) everything was so innovative back then

@mixalhs8155 10 месяцев назад

Is this worth it? Does it increase hp?

@Manuqtix.Manuqtix 2 года назад

Can you show us how to mount a trigger wheel on your crankshaft pulley?

@MattBerrymotorsport 2 года назад

hey i had to buy an aftermarket Ross performance balancer and the trigger wheel to suit. not sure how to mount one to a stock balancer sorry

@mickholgate3347 4 года назад

awesome!!!

@hoonaticbloggs5402 3 года назад

Very good. But how do you balance them? Most set ups have a method of syncing

@MattBerrymotorsport 3 года назад

Balancef box from ebay ,:)

@drmikegaspwred1483 3 года назад

i think im gona build this onto my 6cly turbo race bmw

@javiermorales6184 4 года назад

Hi Matt, I want to do the same thing in my car that you used throtter body

@111soreal 3 года назад

Perfect

@jmlcustoms1393 4 года назад

Nice!! Well done and really creative, how many horsepowers did you gain with all your mods? I have 1.6 4A-FE and I want to have more power, do you think is better to go crazy with this engine or better get a silvertop or maybe blacktop 4A-GE, I have an AE111 Levin

@MattBerrymotorsport 4 года назад

Thanks Jose i didn't gain much HP, around 30 HP... But the torque numbers almost doubled to 120nm. Car is really fantastic to drive. You will find that the 4 age is a much better designed engine than my 1500cc 5efe... Put a set of cams in your engine along with a good exhaust manifold and you will be over 200 HP. With an after market ECU of course

@jmlcustoms1393 4 года назад

@@MattBerrymotorsport thanks man

@theedge5584 2 года назад

Trying to do this to my b18c

@charliegrey3041 3 года назад

hey i just wanted to know, how would you get all the butterfly valves to open up as you put your foot down, is this done with a throttle cable or something

@MattBerrymotorsport 3 года назад

on throttle body number 3, i have the stock cable link still attached to the throttle. In the video i made a new cable bracket to hold it in place.