If you are having issues where the motor stops (either display remains lit or not), get random error 25 or 30 that resets after a power cycle. Then this bypass will fix your bike in no time.
So what is happening is that you are loosing power sometimes for 10 milliseconds or less and that will just leave you with a lit up display and dead motor, depending on the voltage drop it ca recover itself or just stay dead. But if the fault is over 10 milliseconds, the voltage will have gone too low and the processor in the controller will be dead and needs a reset, the reset can be that you have to power up the system again, but sometimes you will have to manually remove the battery and insert it again (or a quick charge of a few seconds)
So the only way to have this is if the spring pins on the battery are sticking or if the battery is moving in the frame while riding or that the chrome switch is having false contacts.
For X2 V2 owners, make sure to update the firmware if your bike was shipped before May 18th 2022, the newer firmware does also help with random error codes.
The crimps I'm using are White Dry B crimps (AKA phone crimps or alarms crimps) No need for the blue ones but they work good too they only have dielectric grease in them.
www.amazon.com/B-Connector-Te...
5 июн 2022
