How to Center The Steering Box and Steering wheel on a Jeep CJ 

Jeep CJ 101 OG ! Back to the basics! Thank you frens…

Thanks for the video. My left turning radius was terrible. Sure enough, the gearbox needed to be centered.

Just what I was looking for.. tired of my YJ steering wheel being off..

Excellent video, thanks for posting. I’m nearing the end of my CJ7 restoration and was wondering how to do this.

I have that exact problem currently. However, I think my steering gear is worn out since the Jeep lane drifts and the steering wheel free spins in turns. It's a butt clincher when you have a whole revolution until the steering reacts.

done learnt today! thanks brother

Thanks.

thanks for this!!!

Very much appreciated

Awesome!

Good video but very confusing.. I've tried this method on my YJ after replacing all the ball joints and still by adjusting the drag link I could not get the same number of turns on both sides and the steering wheel middle spoke to be in the centered when the wheels were straight...My jeep came with a 6" lift and its steering wheel has never been aligned...

Nice! Thanks!

Great Video! Would you be able to adjust the steering shaft at the u-joint the same way with a factory style steering shaft Vs. the aftermarket?

Should be included in the job it can be a lot of money and time to fix an also before you take it apart use a paint marker and maker it's location 😎

i just tried doing this eadjustment for the box centering at least on my 73 cj6 It has a later CJ box with the o-ring pressure and return lines but still has the 73 steering shaft and big diameter steering wheel. I am only getting 3 1/4 ish from lock to lock. I assume that is normal for a later model cj box? I got it all centered up and it mainly meant adjusting the drag link to get full lock up on the knuckle stops on the side I wasn't getting full turn to lock. Im weirded out about the box though. I wonder if there was a parts house mix up with the box and I got a car based box? I've had it for years but it was on my jeep that used to be trail driven only. I've since restored the jeep and taken it back to street driven duty and light trail use. Should I get rid of it and find a 4 + lock to lock box?

What are those front leaf spring shackles about? Never seen ones like that

This is a great video, I just replaced the power steering box in my 1983 CJ7... however I don't have an aftermarket shaft like this. I honestly have no idea how to get the wheel straight after making sure the steering is centered in the box. Both ends have a groove/bolt on the steering shaft, so I can't just remove it and move it on the splines. Any tips? Or do I just have to deal with crooked steering wheel when box is centered ( i'm talking before I touch the pitman arm its disconnected )

Does this mess with canceling turn signals?

that's a factory auto in a cj5 is'nt that rare

Man hope this works on my 90 4runner put a new box in it rebuilt the FRONT END COMPLETELY everything! DID NOT center my box so it wont hit the STOPS on the right side off about 1 1/2 inch turn left hits the Stops!!!!