How to ceramic coat a brand new car! Step by step DIY guide 

You can purchase the full DIY Detail line here www.diydetail.com

And also with the panel prep is Nick doing it while he is buffing the The Polish off. By using the panel prep as a lubricant to take off the Polish.

Excellent video guys ,enjoy the products and love the matching red sneakers even more 😂. On a real note thanks again for the video and hope you both have a great week.

Hey guys, great video once again. If the vehicle didn’t need any polishing or decontaminating, could you have done Rinseless Wash instead of a wash with incredible suds? I know that you mentioned Rinseless Wash leaves nothing behind so that is ideal prior to applying a ceramic coating. Thanks

I appreciate the education Yvan and Nick 💪 Especially how you don't need an expensive polisher. I can't wait to use the Coating.

Can I use either Incredible Suds or Rinseless Wash without the All Clean? I also plan to skip the polishing step, do you recommend the microfiber coating applicators or the foam ones for beginners?

New vehicle owner. Is it necessary to add the polish step. I've recently seen one of your other videos and the polish step was not added. Just curious.

Sorry for noob questions, a very noob first timer here… just so I understand, we wipe off polish with a panel prep in a low nap microfibre towel, right ?

Hey guys - my wife and I are buying a new CRV soon that is being made in the factory this week. If we take it home 2 or 3 weeks from now, is the paint able to accept a coating? Or does it need to gas out longer?

Wonderful video!

Fantastic video! I just recently applied my first ceramic coating (Gyeon Mohs Evo) and wound up with a few high spots. My lighting was less than ideal, and it flashed VERY fast! If you did too large of an area, well, high spot for sure. Your coating looks like it allows a bit more wiggle room, and that's good. Everything in your line that I've tried so far has been very impressive. And you two work so well together in your videos. Keep up the good work!

Do you guys recommend a paint thickness gauge to check clear coat before polishing? If you do do you have a certain brand ?

My car only has 600 miles on it and I'm looking at trying this since you make it look easy. The car currently has a sealant on it from myself and whatever other wax/sealant the dealer used I'm sure. How do I make sure that is all off? Is the polish doing that?

Hi I noticed that the all clean that's used on the tires is more foamy Then the all clean that you put on the Jeep does the Jeep get a 30 : 1 ratio and the tires get a 15 : 1?

Hi. Can I use also ceramic coating on car screen I meant navigation system?

Can you still do the polishing and ceramic coating with the rinseless wash method?

Can you do more than one vehicle with one bottle of ceramic coating?

I was a little surprised with brand new Jeep that u didn’t choose the rotary.

If i want to also remove water spots, where in the decon process do you do that on?

One thing I love about the product line is the simplicity and the effectiveness. Be methodical with your prep, do your best not to overthink and you get a phenomenal result! This jeep looks great and its only going to get better! Also great work on removing that tire sling, that's a big pet peeve of mine lol

Great video..Few questions...how often do you the flip wipe off towel to a new dry side? Also, I'm having an issue with dust being attracted back to plastic/fiberglass panels and storage bins removed from Harley to coat off the bike. I do my panel prep wipe using Gyeon's spray & within a min. dust particles are settling on the part again. Is there any way to remedy that? A body guy working @ Harley dealership told me to use straight 91% IPA, which is naturally anti-static. Any truth to that or what would you recommend? Do you think dust settling on the metal coating after leveling it will be a visible issue?

What polisher and pads were used in the video? Thanks

The ceramic bottle does it come with the applicator also

Could you swap out the full foam wash for a rinse less wash?

Can you do a 8 yr coating and go over with a 3 yr coating

So, is ceramic coating better than McKees?

Jumping

How long will the coating last?

Do you need to clay bar the car

I bought the Ceramic Coating kit and it came with one waffle pad, how frequently should I be cleaning that or as I’m going? And should I be wetting it?

This may have been asked already, but you can use the graphine 3yr product on everything even glass? What about brake calipers?

Question the polish you are using is it an all in one like 3D speed? Is there any compound in it? Great Video guys . Also what ceramic coating are you using? I understand it’s a DIY coating but which one?

for the 3 coatings you offer, how long application can the vehicle be taken out in the elements and get wet. How long to wait until 1st wash?

How many bottles of 5-year coating will I need for coating full 2023 genesis gv70 car including wheels and mirrors and windshield ? … I guess it is mostly same size as the one in this video

After you removed everything that’s on the paint you’re adding polish. Doesn’t that seal up the pores that you’re trying to keep open for the ceramic? It’s that step that doesn’t make sense to me. It seems like it would be sealing up the paint before adding the ceramic. Can you explain the logic behind that?

Could you use rinseless instead of incredible suds ?

Ohhhhhhhhh yeahhhhhhhh!!

Looks good! Did you dilute the All Clean for the presoak? Also, could you presoak with All Clean and then remove that with the rinseless?

How many coats usually we need to do of ceramic coating..? Only once or more at a time ..?

Curious why you guys wouldn't rinse after using the foam Cannon before the contact wash?

Hey Yvan and Nick. I'll be using the Ceramic Coating on a BMW this weekend. How many hours should I wait until topping it with ceramic gloss with your coatings?

Even though you didn't use a protective drying aid, you could use Rinseless Wash right?

Very simple, straight forward. Excellent video! Great tips, I like the circular application method to minimize high spots

So tar and glue remover is not nessary for new car. In preparation for ceramic coating ?

is incredible suds a pure shampoo or does it contain polymers like rinseless?

The moment we've all been waiting for! I hope you're having a great day!

the nano there is no instruction safe like temperature for applying also there is nothing info about the spec of the product like how match Si02 % have in this nano.

When you dry the car without a drying aid why don’t you use rinseless wash as a drying aid?

Do you coat the glass also? If doing this by yourself, do you do one panel at a time? Won’t the applicator dry as you are swapping back and forth?

Can I wash, decontaminate, panel prep, polish car outside in open away from direct sunlight, then drive to my apartment garage and start applying ceramic coating on it ? So that it can stay indoor for about 24hrs ?

do you recommend a panel prep after the polish?

I have been gathering all the products needed to ceramic coat my new white car… unfortunately, I see the drying towels and levelling plus buffing towels are out of stock here im Canada… I got my drying towels from “The Rag Company The 1500 Drying Towel” but unable to find which kind of towel should I use to level and buff both interior and exterior polish and coating… any help in finding me one much appreciated…. Thanks… and also number of towels required for one…

I use shammy towels for drying.

May ask the Speed of the buffer?

1. How many cars (regular sedan) can one bottle of 5 year coat? 2. Will I get a deeper gloss if I apply 2 coats?

What was nick spraying on the towel as you were polishing

How long does the ceramic coating last?

Let me have it

The coating looks great to work with and it looks like gloss was definitely increased! Do you recommend one or two coats of coating? Thank you guys for another great video!

Hi! Do you guys ship your products here in Philippines? Do you have amazon? I really wanna try your product but when I tried ordering on your website, I can't change the country on the shipping details. Thanks!

Where does one get that clear bucket with measurements. Thanks. I’ve used your polish. So far it’s amazing. It made my black trim on my Jeep look new!

Thanks fellas dope video and super informative!!

If I were to use another company’s glass specific coating and the 5 year coating on everything else, what order would you recommend? Windshield or paint coated first?

Since ceramic gloss and quick beads are a drying aid, does that mean i spray it on while the vehicle is wet right after the wash?

Quick 1 steps > everything Better for the clear and I just have more fun not being stuck in one spot for so long.

What did you prep the Jeep with AFTER the polish?

I just ordered a ton of stuff from you all including the 5 year ceramic coating kit, my Model Y just got PPFd on the front, what are the steps for the covered parts vs the bare paint?

Great video

What da sander are you using

Love the video, I was wondering if the coating can help prevent scratches/swirls?

The suspension is killing me

Can’t wait !

IPA wash after the polishing?

Nick that sponge is expensive 😂

Did I miss the panel prep step in this video ?!

Get to the point. Too much gabbing and attempt at comic relief. Great Ad though.

Making detailing fun, ✅

You polished yhe vehicle in horizontal strokes only, not alternating and then went directly to coating the vehicle? You won't be touching my car 🙄🙄🙄