No video :(

How to change a CV on a Ford Ranger/Mazda BT50

Подписаться 16 тыс.

Просмотров 90 тыс.

50% 1

Today we change a CV
I have been asked many times to make a video on how to change a cv so here it is!!!
Knowing how to change a CV is very valuable. Breaking a CV isn't a case of IF you will break a cv but WHEN you break a cv, and if you know how to fix it yourself out on the tracks will mean you won't have to cancel your weekend away with the lads.
Watch this video and it will really help you, I have changed my cv a couple of times and the first time took me around a hour to do with a few helpful calls to my mates Steve and Corey.
If I can change a cv you will definitely be able to do it!!
Tools you will need to keep in your car:
Biggest shifter you can find
36mm socket
selection of screwdrivers
rattle gun
jack
a decent socket set
tie down strap
I hope this video will be helpful to all you legends out there!!!
Let me know if this was a helpful video and if theres any other videos I can do for you to make it easier for you to fix or modify you Ranger or BT50

Опубликовано:

27 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@mrpoopypants9586 5 лет назад

Thanks Aaron, you've just saved me pulling mine out to make sure there are no surprises if I need to do it in anger! Great idea to put this up. Much appreciated. Cheers. PP

@heaistevenhoko1845 5 лет назад

Thumps up for your video. I have being having problems trying to remove my right hand front CV on my 2006 Mazda BT50 4x4. Your video has help me overcome my problem and looking forward to replacing it on my own.

@crack-a-tinny4x471 6 лет назад

Great video bud.... I think everyone’s been waiting for a good tutorial like this.....For every one watching this I’d recommend downloading it so you can reference it on the tracks when you’ve got not data or phone reception.... keep up the good work Aaron.... 🤙🏻👌🏻

@Morgs148 6 лет назад

Crack- A- Tinny 4X4 excellent advice. I have alot of vids downloaded on my phone for that very reason.

@michaeltoomer4090 6 лет назад

I have just done exactly that. I carry spare CVs and all the tools with me but haven’t changed one myself yet. This vid will come in handy cheers

@firstleaves 3 месяца назад

Thanks for the great tutorial! Mine fell out today and now I know what to do. Keep well and see you down the Capertee.

@robertl5202 6 лет назад

Thank you. Finally a video for the late model Rangers. Much appreciated !

@AzventuresAustralia 6 лет назад

Robert L mate I searched for ages for a recent model video too!!! Glad i made it and it helps many fellas out there 👊👊

@AvScanNZ 2 года назад

Mate you're a legend. Thanks so much for this.

@rogeliopitti7120 3 года назад

Great video. Proudly owner of a Ford Ranger XLT 2015.

@johnrizzotto2449 11 месяцев назад

Thanks for your video, helped me heaps. Mine was a bit more due to the sway bar...

@user-io2fi8gz6u 8 месяцев назад

Awesome video mate, well explained and demonstrated 👍

@beans656 2 года назад

Nice touch with the Kookaburra laughing in the background just as Aaron completes the removal of CV and axle at 9:00

@Morgs148 6 лет назад

Good job brother! Thanks for the tips

@RobGaunt73 6 лет назад

Thanks mate great vid. I’ll give it a go now. You’ve inspired me. Legend

@AzventuresAustralia 6 лет назад

Rob Gaunt thanks mate!!!get into it bro!! If I can do it you can too 🤙🤙👊👊

@andrewkelk8414 4 года назад

Looks so easy, even a sparky could do it 😉👍

@dune_tech 6 лет назад

Once again. Great content

@racinsadventures597 6 лет назад

Love your work brother 👍🏻😎

@user-jj8nu3ef3w 9 месяцев назад

Love your work I learnt something 🍻🍻🍻

@hoodwinked6600 5 лет назад

Great informative video. Thanks Mate.

@herbyykoni832 6 месяцев назад

great work and great advice

@explorethebush 4 года назад

Really well explained thanks mate 👍

@lukebransby 3 года назад

Cheers for the Clip. With that 53mm Shifter, take the adjustable screw out and grind off just a couple mm of it, where it stops on the teeth and youl'll have a 65mm shifter.

@jennings68 2 года назад

Thanks Mate,Like your style.

@Despertaferro100 4 года назад

Muchas gracias!!!!! from Barcelona (Catalonia)

@olliekeemer7048 3 года назад

Sick vid dude, many thanks

@THEGENR4LLEE 4 года назад

Much needed video

@regmccormack3157 5 лет назад

You just gotta love aussies there ain't no bullshit with these guys

@AzventuresAustralia 5 лет назад

Reg McCormack I’ll take that as a compliment thanks reg 🤙🤙

@janstrydom9821 5 лет назад

Thank you for the lesson, I found it very interesting. ( Jan Strydom Lydenburg South Africa)

@rjl110919581 5 лет назад

THANK YOU FOR DETAIL VIDEO AS SEE WHAT CAN DO

@BASXIII 5 лет назад

Very informative and helpful. Only dramas I had was my nut was a 35mm, not 36 as mentioned. My UCA seems to be spring tensioned or something. As soon as I had that nut off the UCA shot back up nearly taking an eye out... I also had the sway bar still in which made it things a little harder

@cliffordleach1273 6 месяцев назад

I know this is old and I just came across this video as I was searching a couple days ago for a quick run down as I broke the right front cv on the trails. Anyways yea that but is 35mm not 36 and I noticed when he was showing it the 36mm he had was fitting fairly loose. It worked for him nonetheless.

@rustyw3858 5 лет назад

NICE JOB

@liampaisley8396 5 лет назад

Good vid man, reckon you could do a vid changing a tierod end. Cheers man.

@tiny5866 3 года назад

Very good job i like your video i have a 2012 ford ranger i am doing up

@jayromas5385 3 года назад

Bro your the man , Choice bro choice 👍👌

@eternallearner8185 5 лет назад

Russel Coight with ink. Good vid.

@derkwei 2 года назад

Amazing skill! It would take me half day. Mine is a everest same as courier so Ibhave to go search for it in youtube yet

@cjalleninstalls 3 года назад

Great video mate you just saved me 🤙

@AzventuresAustralia 3 года назад

Thanks mate!!! Glad I made this one to help everyone out 🤙🤙

@philipw7557 5 лет назад

Nice one 😎

@rosesolon9243 4 года назад

Great video mate very detailed I have a ranger 2009 pm model would it be pretty much the same, also does the axle always come out when u pull the cv shaft out. if it does come out would you put the axle on the shaft then put back it just like your video. what are the chances of the axle staying in place thanks

@edwinarugay718 4 года назад

Nice vid...thanks

@mallo_man95 4 года назад

Hey mate are you able to do a video on why you don't have your front sway bar in and what's the pros and cons of it?? :)

@whoguy4231 5 лет назад

Good one mate!

@AzventuresAustralia 5 лет назад

Brian Lee thanks mate

@user-pw3jg5pp6j 4 месяца назад

Thanks I like It, a 35mm socket makes a better fitt

@andrewandchez 3 года назад

Hey thanks for this vid. You say your complete axel came out. Pretty sure I'm going to need that to happen for me when I attempt to fix the leaking seal. Any tips and is the inner axel also held in by a sirclip. Cheers

@paramedia4282 5 лет назад

Great vid. I'm just about to do mine in the UK. I hate to be "that guy", but do you know how many Nm or Ft-Lb to tighten the nuts? :)

@A.A.HadiWhite 2 года назад

do you know the spec of the ranger's axle CV drives? overall length? splines of each side? That would be awsomeif you can share that with us. 👍

@aussierider1016 5 лет назад

Loved the video , found it entertaining and informative...lol, a big f'ing socket...hahahaha

@longy509 7 месяцев назад

Hey mate how do you sort out the axle when it comes out mine just done the same thing

@pedrosky198 5 лет назад

Hello, i have a question, the ball joint on a Ford ranger 2013 3.2 will replace alone or together with the lower control arm?

@diyproject-automotive9565 3 года назад

thanks

@hahaha93510 4 года назад

Great video, thanks Azventures Australia , it's hard to find PX ranger repairing video on RU-vid. Do you remember what size socket for the axle nut? i checked the manual, the torque is 275NM, seems your tool open it quick easily. Thanks again!!

@AzventuresAustralia 4 года назад

hahaha93510 yeah mate it’s a 36mm socket 🤙

@lailey1972 Год назад

Hey mate any ideas on the axle shaft oil seal part numbers on front left and right. Ford don't have a listing for them.

@tedgaudet9832 5 лет назад

Hey mate good vids, just looking back at this video. Where did you get your after market cvs from? I’ve had a look online but not much luck. Cheers 🤙

@AzventuresAustralia 5 лет назад

Ted Gaudet hey buddy!! Thanks mate 🤙 I get my cvs from wreckers now, I buy genuine cvs from $120-$250 depending on how many kms are on them, if you want to buy aftermarket cv you best getting them from bursons and only get the BWS brand

@kevinshipman9556 4 года назад

Sorry I started taking my front dif cover off of my 2003 Ford ranger I got it loose how can I get it resealed

@samahanplasticantunay9336 Год назад

Where does the circlip is?? On the differential or on the axle??

@CarlosHerrera-lf1vh 4 года назад

Did you have to disconnect the Battery or Electronic Steering??

@stuart2712 3 года назад

How do you stop the axel coming out?

@RobWilliams4x4 4 года назад

Good video mate. My left side made a clunk noise after coming back from Fraser Is, just got off the sand and turned left hand down to side of road into police RBT and when clunk. So going to have a crack tomorrow and replace with a cozza branded cv. Hope she holds up, right side was replaced under warranty with what I believe is a Supercheap brand after googling the part number.

@patrickstevens4111 4 года назад

Rob Williams how is the COZZA CV holding up? I’ve done the same thing as you and need to replace mine but nervous about aftermarket

@matthewmacgregor1651 3 года назад

Will this be the same as a Mazda bounty ?

@paulmcg193 6 лет назад

Use some brake cleaner on the disc to remove all the oily hand prints....

@pauldisher1 Год назад

fantastic thank you from one chippy to another! Let’s see the mechanics build a fucken house frame

@intersepter100 3 года назад

Great video, you explained it well. I'm curious though, did you simply do this video just to explain how to do the job, or was there another reason? Cheers

@AzventuresAustralia 3 года назад

Thanks mate!! Nope it was purely to show everyone how easy it is to change a cv on a ranger/bt50 if someone breaks one and doesn’t know how to fix it yet

@intersepter100 3 года назад

@@AzventuresAustralia Ok cool, well done

@simonmurray3172 6 лет назад

Good vid thanks Az, is there a trick you've found to not have the axle come out with the CV?

@AzventuresAustralia 6 лет назад

Simon Murray thanks mate!!! With the drivers side it’s more of a gamble. Ecuador it’s a female end on the cv, and there’s a little clip that olds the axel to the cv, it’s no big deal if it comes out, you just need to makes sure you keep it off the ground and clean as, you can easily get the axle out once it’s clean and dry and with a couple taps on the cv should pop out

@oliverchanda25 2 года назад

Please help can that axel come out completely, and the be no problems put it back after it was outside.. please help

@Deatomizer 5 лет назад

Ranger looks great! What made you choose it over others?

@AzventuresAustralia 5 лет назад

DeAtomizer thanks bro!! I chose it over the other utes mainly for the bigger engine and towing capacity

@eliasmatus9355 5 лет назад

hi, i got a question is there a bearing where the inner cv goes? reason cause mine wiggles and someone said it's the bearing but i dont seem to find anywhere where i got it . i got a 2008 mazda bt50 (2.5 turbo diesel)

@MrRobbiecrawford 4 года назад

There is no bearing just a shaft into the diff,they all wiggle a bit on the shaft.

@jokerjanet 3 года назад

Hey bud any tips what to do when the axle comes out with it like what happened to u?im in the middle of changing my cv's and had the same thing happen?

@AzventuresAustralia 3 года назад

Hey mate, I just tapped the axle and the end of the cv to break and surface rust and it popped off mate then just slipped it back in, make sure you put anti-seize on the end of the axle before putting it back on

@4BoltClevo 4 года назад

great vid, I'm getting a coupla spares and whacking them in the back of the ranger. Repco have CV's for the ranger but they're about 358 bucks each. Anyone used them, and if so were they good quality?

@krisford2349 4 года назад

Apparently not that good. Better off chasing genuine through a wrecker. Cheaper too

@MrRobbiecrawford 4 года назад

Its not so much the CV that stuffs up but the boot rips or the boot band comes of letting the grease out and letting sand or dirt into the CV Thus wrecking it.

@fishinginthepilbara9633 3 года назад

Where are your tie rods ?

@philburns4778 6 лет назад

How's she flex with the front swaybar out??? , i heard ya get like 2" more articulation

@AzventuresAustralia 6 лет назад

Phil Burns mate it is one of the best free mods you could do to an ifs car!!! It really makes it work a lot better

@deekay5399 3 года назад

How does it affect the driving? Last time i pulled one out in a hilux it was sloppy on the road

@tomdom_0143 2 года назад

Do you torque the axle nut to a specific amount or just keep going till it feels alright?

@AzventuresAustralia 2 года назад

I just go a bunch of ugga Duggas until it stops moving 🤣 I reckon that’s what a ford mechanic would say as well

@tomdom_0143 2 года назад

@@AzventuresAustralia I don’t think you’re too far off 😂

@roryderbyshire4630 5 лет назад

Shit hot mate

@246goess 4 года назад

How easy is it or hArd to take off the brake rotor

@AzventuresAustralia 4 года назад

Automotive Parts I would say very easy, the calliper is held on with 2 bolts and once the calliper is off the rotor will almost fall off

@246goess 4 года назад

@@AzventuresAustralia I got it off I just got 2 bolts and screw them in the rotors and tighten and they pushed them off. Down here in Barbados parts for these are really exspensive

@user-zu9lq5pn3c 4 года назад

What brand cv do you use mate?

@AzventuresAustralia 4 года назад

MIK 4x4 I get genuine CV’s from the local wrecker mate, they’re the strongest out of all, they can range anywhere from $120-$250 depending on how many kms, just have to check the boots over for any pin holes or splits but usually pretty good, if you can’t get genuine the next best is BWS and get them from bursons and they’re $250 👌

@user-zu9lq5pn3c 4 года назад

Legend cheers mate. I put some brand new cozza cvs on last week and one snapped within 3 days of installing so frustrating.I’ll defs hit up the wreckers get some stronger ones 👍🏻

@dad3562 3 года назад

Lift height and tire size?

@AzventuresAustralia 3 года назад

Tyres are 315/75/16r and it’s 2.5 front and 3 rear mate

@williamtaylor-od4mo 3 месяца назад

Great show do you do one changing a lower control arm on the bt50

@rustykeller8264 4 года назад

Curious why you held up the CV on your bench, and said this is for the left front. Later you picked it up again, and said, lets go change it. Then you took it off the right front side. Why didn't you work on the left front side?

@giangto00 4 года назад

Yeah that was made me confused. I thought every wrecker also any store listed the wrong side because of i was watched this video 🤦🏻‍♀️

@manusheunis6298 3 года назад

Thanks, but that's not a cv. Thats an entire cv assembly, inner, outer, cv axle and spindles. From the title I assumed you meant how to replace the actual cv inside the boot only, where it fits into the spindle housing.

@AzventuresAustralia 3 года назад

Yeah mate this was a video on how to swap out a broken cv so you can keep 4wding. I definitely don’t think the title was deceiving from the response that I’ve gotten about it with how many people it’s helped change a cv

@Challenge_me_geek 5 лет назад

Just easily loosen the cv shaft with a 36mm socket...yeh...just been hanging off the thing with a breaker bar and pipe for the last 15 mins. Put some wd40 on it, heat, hit it, everything. Hardly easily done out in the field me thinks. Not simple