My 2 cents : don’t undo the lower shock bolts unless absolutely necessary. I was able to snake my axle out while leaving the shock bolts in. My shock bolts look absolutely dreadful; I anticipate them breaking upon removal , but that’s a job for another day.
Great video, your talk as you walk through the process was, well I'd have to say the best I've heard out if everyone of the videos I've watched on here great tutorial. Thanks for your help
How come nobody ever mentions the bearing inside the differential that the axel will sit in? Is this something that just doesn't usually go bad or would it be a huge pain in the a to replace?
When I trun sharp right while 4x4 on, I heard strange cranky sound from right front wheel looks like sleeping from Axel gear. Can you suggest me what it is please. Hope fully it going to help me alot with my 2012 FORD RANGER front axle shaft replacement if my guess is correct.
Is it possible to leave the axle in the hub assembly when lowering that steering knuckle off the ball joint shaft? I was wanting to pop the axle out of the differential and remove it while still attached to the knuckle and hub.
Can you do this without removing the outer tie rod from the steering knuckle? if not, would you have to get an alignment after this procedure? thank you.
Hey, just done this and my abs light is now illuminated, took it for a drive to see if it would clear but it hasn't. Typical, when I removed the sensor, it was plastered in rust. Now it's clean, it's refusing to work 😂
hi i bought this exact part for my truck but it doesnt come with the spiral locking clip which holds the cv shaft in place and stabilizes the 4 wheel hub,where can i get the spiral locking clip to buy?
We're you ever able to get your CV tight and not clicking? I have the same 4x4 vacuum hub and could never get the new cv axle tight. You can get a new spiral clip on amazon
Thanks for the video. I’m doing the passenger side (uk) and cannot get the axle out from the transfer case. It’s even more difficult to get to it - does it simply knock out with the pry bar like the video Has anyone done this on the other side? I cannot find a video anywhere!
Boskuu saya mau nanya saya punya renjer tahun 2010 tiap saya masukin 4x4 jalan nanya dikit aja punyi ctek""" tapi kalau jalan lurus gak punyi gituu apanya kira"" bosku ???
what kind of Ford Ranger is that because I have a Ford Ranger and it doesn't have those parts, I BELIEVE you got confused in the title of your video.🤔🤔🤔🤔🤔