How to Change a Mitre Saw Blade | Dewalt Chop Saw Blade Change | DWS779

Подписаться 528 тыс.

Просмотров 192 тыс.

50% 1

In this video I show you how to change a mitre saw blade, in this case on a Dewalt DWS779 mitre saw. Many other chops saws will be able to follow the same directions.
Tools and products in the video:
Dewalt DWS779 Mitre Saw: amzn.to/32mQaz1
Diablo 60 Tooth Blade: amzn.to/3dpv1uf
Torx Bit Driver Set: amzn.to/3toV7TE
Thank you for watching and for subscribing. You can support the channel at no cost to you by using one of the above affiliate links. This helps support the channel for new content!
Blessings,
Adam
How To Home assumes no liability for damage or injury. How To Home highly recommends using proper safety procedures and professionals when needed. Our content is for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not How To Home. How To Home will not be held liable for any negligent or accidental damage or injury resulting from equipment, tools, electrical, fire, electronics or any items contained in this video. Attempt projects and repairs at your own risk.

Хобби

Опубликовано:

17 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 166

@user-eo2nn5ct7r 4 месяца назад

This man should make EVERY instruction vid. Clean camera work, clear voice, excellent editing, well prepared, wit, and brevity. Made it simple and painless.

@richvail7551 Год назад

Soon as he said “most of you probably already lost this tool.” I knew this was the right guy to follow. 🤭🤭🤭

@davidray1308 Год назад

Nice demo - appreciate that you got right into how to change the blade without a lot of unnecessary chit chat.

@alanborack9256 2 года назад

I bought the DWS779 and an 80 tooth blade and the plan was to change out the 32 tooth. There are a lot of videos on changing the blade BUT yours was the only one that mentioned loosening the screen towards the back of the silver plate.....without that screw being loosened, I was not able to get the blade guard out of the way to remove the bolt for the blade -- so KUDOS to you.

@edwardknobeloch6650 9 месяцев назад

Very good practical demonstration, no needless information or distracting comedy. Thank you.

@elizabethanneduncan855 11 месяцев назад

Great demo video. I appreciate all the detail and close up of "button" on the opposite side. Also the comment about don't follow lefty loosey righty tighty was great. Glad I found your video.

@JessicaVanderhoff Месяц назад

Thank you so much! I know it takes good camera angles and good editing to make a video this clear and easy to follow. Appreciate it!!

@janeanderson3118 4 месяца назад

Thank you for empowering me to replace the blade while my husband was traveling

@TheCasuch 25 дней назад

Perfect video. No fluff or plugs just perfect

@artanis4ever Год назад

Great tutorial! Thanks for taking into consideration those of us who have long since lost our DeWalt- provided torx tool! I had to buy the torx bits along with the new blade and thanks to you, got the job done and I'm off and running again.. good job!

@theeolives 4 месяца назад

Thank you so much. The directions are nothing like you explained. I just got my double compound slide Dewalt miter saw and now I'm ready to change the blade from 32 to 60. Thank you again. :-)

@hashenone Год назад

Thanks for making this. I’m not a dumbass who can’t read a manual, but the extra layer of safety provided by watching someone do the whole thing brings peace of mind!

@gunner8226 8 дней назад

Perfect instruction...got my brand new diablo 80T blade on and old one off no problems. Thanks for the great video❤

@nicholasrichardson2330 7 часов назад

I will be subscribing to your channel. Great content. So clearly stated. I’ll be changing the blade later this morning. Thanks for the clear instructions.

@ProAudioIQ Год назад

Thank you. Fantastic instruction! If everyone were as detailed and skilled in demonstrating as you are, this would be a different world.

@KeiraL1234 Год назад

Simple, clear and fast. I changed my blade with no issues. Thank you!

@datUsAfguy099 2 года назад

Thanks man. Have not changed my current blade in almost 3 yrs. Cuts are sooooo much better now. Thanks again

@HowToHomeDIY 2 года назад

It's amazing how much better a new blade works! Thanks for the feedback!

@Amp1955 8 месяцев назад

@@HowToHomeDIY,👍👍👍

@NilsLindstrom 2 года назад

Just bought a used Dewalt miter saw. The blade was so dull it could start fire when cutting. Thanks for a very understandable video.

@beasthunt 7 месяцев назад

Thanks for the video, bud. Really made light work of it.

@nole8923 Год назад

This was a fantastic tutorial. I just bought my Dewalt miter saw and am making holders for my drills with 3 inch pvc pipe. I had to change out the blade that came with it to a 100 count Diablo blade for the pvc. It would have taken me 3 times as long and much frustration without your video. Thanks a bunch! I generally like to stick with a higher count blade anyway for the type of wood working I do such as making tool holders.

@therealdealedoneill8464 Год назад

Thanks bud, definitely didn't feel like loosening a bunch of screws to figure out the right way to get to the blade on my second hand saw. Saved me the time and headache yeahhhhhh!!!!! Now I can get back to pissing my neighbor off running my saw at 1AM!!!!

@rebadaddy 2 месяца назад

Very helpful. Before seeing this I was making things a lot harder for myself than I had to. Kind of forced me to hang on to a dull blade too long b/c I was reluctant to go thru the hassle. No More..Thanks

@Sparki883 5 месяцев назад

Great video and straightforward!

@jim7smith Год назад

This is the first video from you that I watched. Very straight forward, no extraneous blabbing on and on, just the facts. I liked it so much you earned a like and a sub. Have a blessed day! added.... Mine was slightly different, it had a hex bolt for the blade securing lock instead of the star 40. However, the tool that was on the back of the fence had both the hex and the star 30, so it worked out. I guess a difference in manufacturing runs or something. I have had mine for about 4 years, I think.

@Klootviool17 Год назад

I don’t have a dewalt but was struggling with mine. This tutorial enlightened it for me. Thanks from The Netherlands

@travelmonster6515 7 месяцев назад

Video is great very straightforward and simple. Easy to understand. I appreciate it. Thank you.

@HowToHomeDIY 7 месяцев назад

You're welcome! Glad you liked it. Thanks a lot for the feedback!

@flexiblestrategist9922 4 месяца назад

Which toothed blade should I use to cut pressure treated 2X4 and 5/4--the 40 or the 60?@@HowToHomeDIY

@Jared7873 2 года назад

Thanks for adding info for those who lost the magic tool!

@HowToHomeDIY 2 года назад

Ahh yes the magic tool haha. You are welcome. I lose tools like that constantly. Thanks a lot for the feedback!

@Jared7873 2 года назад

@@HowToHomeDIY By the way, I got my blade in just fine after this video. Thanks!

@HowToHomeDIY 2 года назад

Awesome! Which blade did you go with? I’ve tried almost all of them.

@joefloyd6606 4 месяца назад

Thanks for making this 100 times easier !

@williamshulman9293 3 месяца назад

Thanks much. It's a been awhile. This vid was perfect. Especially on how far to remove the screw. Now my wife can get back to work....

@jean-philippemercier7326 4 месяца назад

Thank you! Simple, quick steps, that you broke down nicely and at a good pace

@marblesrichard 10 месяцев назад

Thank you I had success , my saw is old and got it for cheap ,, did what you said not quite the same ,, some part were a real Bi tch ,, but thanks to you I got through with it

@barneyandcompany6205 3 месяца назад

Truely appreciate the refresher! THANKS!

@HowToHomeDIY 3 месяца назад

You are very welcome! Really glad to hear you liked it. Thanks a lot for the feedback!

@Gr8one220 2 года назад

Great job. Straight to the point

@HowToHomeDIY 2 года назад

Thank you. Appreciate the feedback!

@marioandrade847 Месяц назад

Thanks!! I had the 10” blade. Version but this video helped as well!! 👍🏽👍🏽

@shaheen8654 Год назад

Thanks for the excellent video….straight forward and easy to understand….DeWalt should hire you to do presentations for them

@tripbull421 Год назад

Thankyou for the video! Wasn't confident in changing it so thank you for helping. Great vid!

@ibraheemabdullah4835 Год назад

Nice job! Thanks brother. Nice call on the "you probably lost it already"

@HowToHomeDIY Год назад

I lose those types of tools all of the time so it is a safe assumption. Thanks for the feedback!

@ibraheemabdullah4835 Год назад

@@HowToHomeDIY 👍

@lexieandpapa Год назад

Thanks for the GREAT explanation and demo. I found the torx bits easier to use than the tool provided by DeWalt since they were on so tight. Thanks agan

@samueljarvis4412 10 месяцев назад

Great easy to understand and saved time. Thank you

@pdogakron1623 Год назад

My tool is "somewhere" but never where I need it when I do. T30 and T40 was the best tip!

@solo-boots Год назад

Excellent! quick, concise - just what I needed to know! Many thanks!

@garronguszak1194 Год назад

Thanks, great job of providing. enough detail but not going too long.

@HONCH123 10 месяцев назад

Wow, you covered everything ,Superb , Thank you

@PedrazaC Год назад

Thank you for the tutorial, it was very easy to follow!

@thenumber1Doc Год назад

My saw slightly different but success right away. Thanks 👍

@HowToHomeDIY Год назад

You are welcome. Really glad it was able to help you out. Thanks a lot for the feedback!

@shellynealy4517 6 месяцев назад

Very helpful. Very comprehendible tutorial. Thank you.

@DanPenix Месяц назад

Very well done !

@irainkoolaidTTV Год назад

Thanks so much for the help. Unfortunately I just found out after the install that I ended up buying a 10 inch blade for my 12 inch miter saw so it looks a little silly, but I installed it anyways lol. Just cutting composite decking is all so it’ll be fine. Thanks!

@benjamindbailey 3 месяца назад

Super useful, thanks!

@Rspruill38 2 года назад

Fantastic tutorial!! Great job.

@NilsLindstrom 2 года назад

Exactly what I needed to watch. Thanks!

@aaronbaker1641 4 месяца назад

Right on straight forward thanks

@jimzumbababa6608 Год назад

Exactly what I was looking for. Thanks very much.

@jimmysimao6505 10 месяцев назад

Thanks man good quick tip

@richardboardman1352 6 месяцев назад

very clear. Thank you!

@michaeljkurland 8 месяцев назад

Super great video! Thanks!

@user-rc5bz5xs9e Месяц назад

Thank you lots of help for me

@robira1313 11 месяцев назад

I am literally hitting my saw with a mallet to try to get access to that screw. I've done everything you said.

@cosmichrist 3 месяца назад

Helpful, thank you.

@supersayin1 Год назад

This video helped alot! Thanks!

@wilsonandlucy Год назад

Great video---thank you for getting right into it!

@docdoctme 2 года назад

Great video! Thanks for sharing.

@HowToHomeDIY 2 года назад

You are welcome! Glad you liked it. Thank you for the feedback!

@TheOtherMisterRogers Год назад

Thanks for posting this 👍

@chirileo Месяц назад

Great video, thanks :)

@Edshannah Год назад

Great made that too easy thanks

@c9dan-dan216 Год назад

Thanks so much for this!

@lindasimons2331 9 месяцев назад

Thanks really helped!

@Sava12242 Год назад

Thanks so much!!

@HowToHomeDIY Год назад

You are very welcome! Glad you liked it. Thanks a lot for leaving the feedback Brian!

@hosea49 6 месяцев назад

Very helpful.😊

@JanetHackle 2 месяца назад

Thank you!

@texnewf1968 Год назад

Thanks for the video

@garyricketts5043 Год назад

Thank you.

@HowToHomeDIY Год назад

You are very welcome Gary!

@creb2429 Год назад

They tighten these bad boys up from the factory. Hard to hand loosen

@nyleverg 7 месяцев назад

Life saving video because the instructions in the manual are missing a ton of steps

@michaelaco7 Год назад

Thank you so much buddy, very helpful today😍

@talgo2476 7 месяцев назад

nailed it

@escanaba17 Год назад

thank you you are the best

@ericchen6704 11 месяцев назад

Perfect miter saw.

@kristoff91 2 года назад

Great video

@DarinWheeler1967 3 года назад

I just bought the same saw. I was wondering why you were able to drop the blade and insert it with such ease. Then I noticed you removed the spring part of the dust duct inlet that hangs down. That made all the difference removing and inserting the blade.

@HowToHomeDIY 3 года назад

That actually is a fairly common part to get broken, which is what happened to me. So it probably did make it easier to change out the blade. I make new ones with my 3D printer. Glad you were able to get it changed out!

@Eger118877 Год назад

DeWalt just issued a recall on that rear blade guard/dust duck inlet part for the DWS779. You'll have to check it out to get a free replacement part.

@garygross1085 2 года назад

Well done Sir

@DustyJ День назад

It's weird that the blade is like wedged into my new 779. Now I can't get the new blade to slide in because everything lines up where the bolt is kind of in the way. Every RU-vid tutorial always looks so much easier than it actually is lol

@peterellis4262 10 месяцев назад

chuckle. Phillips head and a hex nut, no torx anything on my saw. BUT - the process is very much the same ;)

@user-uz7fu1uf5b 5 месяцев назад

Thank you

@NSDaishi Год назад

Didn't like how you didn't mention in the inner washer. I was trying to figure out why my blade was so loose.

@jefffree6990 3 месяца назад

1:10 Tool? what tool? i dont remember any tool! 😁 Thanks! Never changed the blade on my DW 716XPS , Couldn't figure out why it was so hard. Don't forget to look behind the fence where i found the tool conveniently mounted! (so thats what thats for!) If not you can buy a replacement for about $11 or use a Torx 30 bit , Dont really need the T 40 because u can use a channel locks/ pliers / socket wrench on the arbor bolt once you get the shroud pushed back. But the 30 bolts are round . What a silly design!

@albertramos3808 Год назад

I found this vid very useful thank you very much and have a nice day!

@Twistedzzxx 11 месяцев назад

Thanks bro

@wyattsdad8561 Год назад

Great vid thank you for putting this out. It totally helped me change my blade. Quick question tho.. My old blade was a 60 tooth and the blades i just biught are 40 tooth. (It’s actually all that the Lowe’s near me had) is this 40 Tooth blade going to be okay for cutting baseboards and moulding? Thank you again man.

@kareemsanchezmota8712 Год назад

Thanks

@emmanuellevargas7021 2 года назад

Hey body very nice video thanks. ..I do have a question ⁉️. I had a 10"disc in my Mitter saw with 30 teeth ..now I got a 60 teeth. But it has the arrow ⬆️ pointing on the opposite dirección on the front of the disk 📀💿 ..should I use the arrow on the Mitter as my guide ___ sorry I am new in this just a weekend warrior...thanks 👍

@vb3452 8 месяцев назад

Great video my friend, and yes! I didn’t have that tool with me, 😅thank you so much for your help, I really appreciate you 😊 Great video easy to understand . Like 👍🏼