Тёмный

How to change front springs / front coil springs on PEUGEOT 206 1 (2D) [TUTORIAL AUTODOC] 

autodoc.co.uk
Подписаться 392 тыс.
Просмотров 13 тыс.
50% 1

How to change front springs / front coil springs / front suspension springs on PEUGEOT 206 1 (2D) 1.6 Convertible 09.2000-present [TUTORIAL AUTODOC]
Springs on PEUGEOT 206+ Hatchback (2L, 2M) (01.2009 - ...) / PEUGEOT 206 Van (04.1999 - 03.2009) / PEUGEOT 206 SW (2E/K) (07.2002 - ...) / PEUGEOT 206 Hatchback (2A/C) 08.1998 - ..) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce springs: KYB, LESJÖFORS, STARK, MONROE, RIDEX.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Springs: www.autodoc.co.uk/car-parts/c...
Springs for PEUGEOT 206 1: www.autodoc.co.uk/car-parts/c...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
All video and pdf tutorials on PEUGEOT 206 1 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/pe...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ ru-vid.com?s...
🛠️ The tools you need to replace front springs:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner no. 17
- Torx # T30
- HEX bit no.H7
- drive socket no. 13
- drive socket no. 16
- drive socket no. 17
- drive socket no. 18
- drive socket no. 21
- drive socket no. 32
- wheel impact socket no.19
- ratchet wrench
- torque wrench
- tap wrench
- hammer
- pin punch
- flat chisel
- crow bar
- hydraulic strut spring compressor
- hydraulic transmission jack
- fender cover
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► PEUGEOT car repair tutorial - • PEUGEOT car repair tut...
► PEUGEOT 206 1 car repair tutorial - • PEUGEOT 206 1 car repa...
► How to replace front brake pads / front brake pad set on PEUGEOT 206 1 (2D) - • How to change front br...
► How to replace front suspension arm / front control arm on PEUGEOT 206 1 (2D) - • How to change front su...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
Snapchat: / autodoc.uk
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Авто/Мото

Опубликовано:

 

18 ноя 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8   
@autodocuk
@autodocuk Год назад
⚠ Attention! This video contains a mistake: 08:13 - the tightening torque is 65 Nm, not 45 Nm. 11:23 - the tightening torque is 65 Nm, not 40 Nm. 11:29 - the tightening torque is 105 Nm, not 55 Nm. 11:45 - the tightening torque is 60 Nm, not 35 Nm. 12:15 - the tightening torque is 165 Nm, not 245 Nm. 13:27 - the tightening torque is 120 Nm, not 100 Nm. 13:52 - the tightening torque is 50 Nm, not 25 Nm. We're sorry for the inconvenience 🙇‍♂
@alendanmark
@alendanmark 4 года назад
And be careful not to take the drive shaft out of the transmission. there are no screws holding it in place, so you better be hoping you can disconnect the driveshaft at the wheel.
@autodocuk
@autodocuk 4 года назад
Thank you for your valuable clarification. It will be useful information for our viewers. Stay tuned with us for more news. Best regards, Autodoc team.
@toncho1986
@toncho1986 Год назад
Hey Pal. How can i put the drive shaft back to the transmission?
@brentsmith5647
@brentsmith5647 2 года назад
You are the best
@alexey9900
@alexey9900 4 года назад
Good 👍👍👍
@wilbertrucker
@wilbertrucker 2 года назад
Smart job.
@autodocuk
@autodocuk 2 года назад
Thanks for your positive comment! Stay with us!
Далее
Я обещал подарить ему самокат!
01:00
КРАСИМ ДЕНЬГИ В РОЗОВЫЙ!
01:01
Просмотров 220 тыс.
2DROTS vs RISENHAHA! КУБОК ФИФЕРОВ 2 ТУР
11:31
HOW TO: Front brakes, Peugeot 206
17:10
Просмотров 57 тыс.
HYDRAULIC PRESS VS ARMOR, USA AND RUSSIA
10:16
Просмотров 3,9 тыс.
Peugeot 206: wheel bearings check/rear axle repair.
13:10
HOW TO: Peugeot 206 wishbone / ball joint
24:50
Просмотров 76 тыс.
EXEED VX отзыв владельца #shorts
1:00
Просмотров 459 тыс.
Bike trick and Bro's aura...
0:11
Просмотров 6 млн