Тёмный

How to change spark plugs on Nissan frontier without removing the intake. 

Xploring The Outdoors
Подписаться 2,2 тыс.
Просмотров 55 тыс.
50% 1

#Overlanding #Camping #Outdoors
How To Change Spark Plugs on Nissan Frontier step by step video
In this video, the presenter uses the following tools:
NGK Plugs: amzn.to/43ZNaa0
Socket wrench
Spark plug socket
Extension bar
Torque wrench
Dielectric grease
New spark plugs
The steps shown in the video are as follows:
Pop the hood of your Nissan Frontier and locate the spark plugs. They should be on top of the engine block.
Use the socket wrench, spark plug socket, and extension bar to remove the ignition coil for each spark plug.
Use the spark plug socket to remove each spark plug.
Check the gap of the new spark plugs with a gap tool. Adjust the gap if necessary.
Apply a small amount of dielectric grease to the inside of each ignition coil before reinserting them into the new spark plugs.
Insert each new spark plug into the spark plug socket and carefully lower it into the spark plug hole.
Tighten each spark plug with the socket wrench and torque wrench to the manufacturer's recommended torque specification.
Reconnect the ignition coils to the new spark plugs.
Once all of the new spark plugs are installed, start your Nissan Frontier and make sure everything is running smoothly.
This video provides a visual demonstration of the steps involved in changing spark plugs on a Nissan Frontier and is a useful resource for anyone who prefers to learn by watching.
-----------------------------------------------------------------------------------------------------------------------
All Links In The Description and Comments are Affiliate Links, If You By Something Through These Links I Do Earn A Small Commission Which Is Used To Keep Creating New Content. I Do Appreciate It Very Much When You Use The Links. Thank You
Linktree is a list of all my links
linktr.ee/Xplo...
Amazon Store Front:
www.amazon.com...
Tubebuddy www.tubebuddy....
Save on Gas Join GETUPSIDE app and use this code : FKUYT
-----------------------------------------------------------------------------------------------------------------------
Please if you like my videos Like & Subscribe and comments are always welcome I enjoy chatting with new people and learning about cool places to visit. Take Care
----------------------------------------------------------------------------------------------------------------------------------------
Truck Gear:
ARB Front Bumper
Rough Country 9,500lb PRO Series Winch
Aux Beam 7" 210W Round LED Offroad Lights
ExtremeLED Light Bar
Ironman4x4 Snorkel
Z1 Titan Swap Kit
Ironman4x4 Rear Nitro Shocks
Ironman4x4 Heavy 610-1100lb Leaf Springs
Ironman4x4 Leaf Spring Bushings
General GrabberX3 Tires
GoRhino Bed Rack
AuxBeam 3" Pods on Bed Rack
CVT Mount Washingston Tent
CVT 55" Hybrid Awning
Weboost Cell Booster
Midland MTX115 GMRS Radio
Garmin Montana 700I
Weather Tech Floor Mats
AuxBeam Switch Pod
Renogy Adventurer 30 Solar Charge Controller
Renogy 40amp DC - DC Charger
Dual Power Queen 100ah LifeP04 Batteries
Xploring The Outdoors

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 161   
@godemperormeow8591
@godemperormeow8591 Год назад
Spark plugs 1-5: easy, takes like 10 mins to get to. Spark plug 6: very hard, over 45 mins of obsessive cursing and self-hatred.
@ELEVOPR
@ELEVOPR Год назад
😂😂😂
@anthonyr5869
@anthonyr5869 11 месяцев назад
Why not just remove the intake than
@ryandinatale110
@ryandinatale110 7 месяцев назад
That's even worse​@@anthonyr5869
@ib1ray
@ib1ray 5 месяцев назад
Is number six the one on the passenger side towards the front of the vehicle?
@Beachnative42
@Beachnative42 4 месяца назад
Getting #6 done builds character!
@mgherter
@mgherter Год назад
Thanks for the video. On the 6th one I used a ratcheting 10mm wrench, made easy work of the coil hold-down bolt. And also wobble really helped on 5 and 6.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Thanks
@apocsurvival916
@apocsurvival916 Год назад
Yes, no bullshit, just straight up information on gettin shit done!
@jhpfmj
@jhpfmj Месяц назад
makes me miss the ole 300-6... plugs right there...
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@jhpfmj definitely
@laneflickner8693
@laneflickner8693 26 дней назад
Very greatful i stumbled accross your video. Was putting it off because i was under the impression that i had to take the intake off. Whered you get that bumper?
@Xploring_The_Outdoors
@Xploring_The_Outdoors 24 дня назад
@@laneflickner8693 well hope it saved you time and my bumper is ARB bumper I ordered off bumper super store I believe
@DJbertperez
@DJbertperez 2 месяца назад
Thank you for the tutorial! Great job not having to remove that freekin intake unit. !
@carltongossett2282
@carltongossett2282 10 месяцев назад
I changed the spark plugs in my 2005 nessan extra 4.0 v6 now I have a Service Engine Soon Light On Now . What Happened 😮
@Xploring_The_Outdoors
@Xploring_The_Outdoors 10 месяцев назад
I would see if there’s a code if you have access to a code reader and make sure the spark plug wires are connected good. Do you have individual coils on each plug like my 2017 frontier?
@sharkdegrijze
@sharkdegrijze 6 месяцев назад
Hey ! When changing the spark plugs is it necessarily to change the coil packs ? Im doing this my self because they charging me 1000$ to change them 😂
@Xploring_The_Outdoors
@Xploring_The_Outdoors 6 месяцев назад
I didn’t change mine and haven’t had any issues
@d.lami.6990
@d.lami.6990 8 месяцев назад
Unbelievable. Seriously thinking about selling my Frontier now. What a joke. Hell ill just change 5 leave the sixth one for another day ...
@Xploring_The_Outdoors
@Xploring_The_Outdoors 8 месяцев назад
It’s really not that bad
@Dark_Ages_Crusader
@Dark_Ages_Crusader 5 месяцев назад
Every vehicle has its warts. For Nissan its things like a tricky spark plug. For Ford its little things like being unreliable turd on wheels.
@saulescamilla3605
@saulescamilla3605 5 месяцев назад
That’s what I had to do. I’m changing the difficult one this weekend my friend!
3 месяца назад
Or just pull out the intake manifold. Not a big deal
@nathancovington8517
@nathancovington8517 Месяц назад
Trash 🗑 🚮...he is liying about getting them out
@SibeDad
@SibeDad Год назад
Thanks, made the changing of the spark plugs on my 2012 Xterra a breeze👍👍
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Awesome glad this video is helpful
@jakestoe
@jakestoe Месяц назад
Found this video after changing my camshaft position sensor. Was looking at that passenger side, thinking it would be a PITA to change the plugs. You made it look doable. Thanks!
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@jakestoe that passenger cam sensor is fun too. I’m going to be doing my fuel injectors before to long and decide to wait and order new valve covers to change the gaskets while I have access to them.
@alexlagunes2427
@alexlagunes2427 4 месяца назад
Newer models have the opening on the intake covered
@frankmanresa1
@frankmanresa1 Месяц назад
Thanks dude for the great video! I got done just like you said! Whoever designed that engine o how do you say oh somebody owe us some beers!
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@frankmanresa1 awesome, yea they owe a lot of beers
@manuelramirez7260
@manuelramirez7260 2 месяца назад
Thanks for posting. You saved me $657.96. That's the price the Nissan dealership wanted to charge to replace spark plugs. .
@Xploring_The_Outdoors
@Xploring_The_Outdoors 2 месяца назад
@@manuelramirez7260 that’s crazy
@williamburrows6006
@williamburrows6006 5 месяцев назад
No guts, no glory. That passenger side front looks like it is a bear to get the 10mm bolt off and on the coil . I’m teaching my granddaughter how to work on cars. I think this will be a good spot to use her skinny hand in there.👍
@Xploring_The_Outdoors
@Xploring_The_Outdoors 5 месяцев назад
Teach em young
@bribri1657
@bribri1657 Год назад
I just changed mine without pulling intake and yes it was a major PITA. I ALMOST SAID F IT AND PULLED INTAKE BUT I DIDN'T LOL. My 2019 frontier has only 40k miles but my plug still looked black so went ahead and did them. With all the ethanol in the fuel now there's no way they will last to 105k like the book says.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
I changed mine at over 105k but I run seafoam in my fuel every few fill ups
@mr2xxr429
@mr2xxr429 Год назад
116k on mine, no problems
@cockyclay1
@cockyclay1 9 месяцев назад
145k on mine and just now getting ready to change the spark plugs. Had zero problems.
@ClumsyCars
@ClumsyCars 9 месяцев назад
Ethanol burns much cleaner
@anthonycullers8539
@anthonycullers8539 Месяц назад
Really helped.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@anthonycullers8539 glad to hear
@rebbejon8132
@rebbejon8132 10 месяцев назад
You mentioned going to a 1/4” set… but in any case, how long were your extensions for both 3/8 and 1/4? Looks like I gotta add those to my tool inventory as I don’t have much to my tool inventory. Maybe list what tools you used? Great info and video.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 10 месяцев назад
Good idea, I believe both were around 6” in length. Any other ideas or info I should add to videos going forward? I’ll do a video on my tool roll I keep with me at all times too
@dogdiggingrj2089
@dogdiggingrj2089 Год назад
Why no dialectic grease to keep water out
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Never had an issue or need
@mie2263
@mie2263 Год назад
No way to do this on 4 cylinder engine 😢😢😢 why do they made it so complicated for some that should take no more than 20 minutes
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
I was told you couldn’t on the 4.0 too so I needed to do it anyway. I hate they design stuff so you have to either take so much apart or pay ridiculous prices for a shop to do it
@richardnelson2217
@richardnelson2217 4 месяца назад
You made it look easy! I just did mine and it took some finesse but i got it done. Not as much swearing as i thought there would be. Your video helped Immensely, thank you!
@Xploring_The_Outdoors
@Xploring_The_Outdoors 4 месяца назад
Awesome, the best part about video is I get to edit out the swearing lol
@michaelwood875
@michaelwood875 6 месяцев назад
do you recommend spraying WD40 on plug threads?
@Xploring_The_Outdoors
@Xploring_The_Outdoors 6 месяцев назад
I never do so I can’t recommend it honestly.
@19211265
@19211265 Год назад
Good job 👍🏻 I always save the difficult for last too!
@shawnwaldrop3702
@shawnwaldrop3702 11 месяцев назад
What year is your Frontier? Seems like their different darn near every model year
@Xploring_The_Outdoors
@Xploring_The_Outdoors 11 месяцев назад
2017 SV 4.0 v6
@blackbartbartholomew7122
@blackbartbartholomew7122 Месяц назад
Thank You so much! That helped me a huge amount!
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@blackbartbartholomew7122 glad to hear
@rodneyskaggs1581
@rodneyskaggs1581 8 месяцев назад
My dude, I tried this and didn't go so hot. Ended up breaking the $80 ignition boot. This was a bad idea. If you can get that one out good for you, but I spent more time goofing with it than it would have taken to do it right.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 8 месяцев назад
You’re the first one that told me this, sorry you broke the boot wasn’t my intention, most have thanked me for the info
@ELEVOPR
@ELEVOPR Год назад
great job right to the point. I have to ask, Why No anti-Seize paste or grease on the Spark plugs? Can save you from a future headache down the road. 🤷🏻‍♂️
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Thanks
@MurphManPB
@MurphManPB Год назад
NGK doesn't recommend you use anti sieze on their plugs.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
@@MurphManPB good info thanks
@ELEVOPR
@ELEVOPR Год назад
@@MurphManPB That's because NGK has a special coating around their metal threads already, to prevent corrosion. Thanks for sharing I didn't know that. Got this from NGK website. "NGK spark plugs feature trivalent plating. This silver or chrome-colored finish on the threads is designed to provide corrosion resistance against moisture and chemicals. The coating also acts as a release agent during spark plug removal. NGK spark plugs are installed at the factory dry, without lubrication or anti-seize. Anti-seize can act as a lubricant, altering torque values up to 20 percent, increasing the risk of spark plug thread breakage and/or metal shell stretch. Thread breakage can sometimes involve removing the cylinder head for repair. Metal shell stretch changes the heat"
@mikechenoweth2121
@mikechenoweth2121 6 месяцев назад
Thanks, man. It's really not as hard as it looks. Bada$$ intro, too.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 6 месяцев назад
Thank you glad the video helped
@jimvanecek7192
@jimvanecek7192 4 месяца назад
Nice job with the video, I changed all but the difficult one a year ago but I'll tackle the last one now. I've got a 2012 with 160K, great pickup for the last 9 years!
@Xploring_The_Outdoors
@Xploring_The_Outdoors 4 месяца назад
I’ve got 140,000 on my 2017, miner issues so far mostly just sensors
@doubledeeeeeeez
@doubledeeeeeeez Год назад
Good vid bro. I can tell you work on helicopters cuz you like to do things the hard way. lol. JK. Only thing I might add, is I have some deep wells made for plugs that have a lil rubber grommet specifically made inside that captures the spark plugs so you don't have to toss them down into that deep hole where they impact on the neg electrode tab bending and closing the gap for you. Now you have 5 plugs with the correct gapping out the box and 1 plug with a questionable gap because the impact probably bent it a tad. But hey, as long as she runs.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Nah I didn’t drop them that hard, the fronty runs like a champ. Doing the titan swap right now left side about 65% complete
@brodylangsly6194
@brodylangsly6194 Год назад
My hands are to big for all that lol
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Lol
@brodylangsly6194
@brodylangsly6194 Год назад
I got it with swivels and a flathead though thanks for the vid! Fudge that intake!
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
@@brodylangsly6194 awesome
@13ghosts31
@13ghosts31 11 месяцев назад
So, you don’t have to change the coil packs also? And did you just use an adapter for 1/4 drive to 3/8 and use the same 3/8 drive spark plug socket? Awesome video by the way. I just got done putting in a new alternator in a 2008 pathfinder. I figure I might as well change the plugs while I’m at it. Pathfinder has 143000 on it.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 11 месяцев назад
No didn’t change the coils out and I had a 3/8 drive socket and ratchet and I had a 1/4 Dr ratchet and adapters I just use whatever fits the situation best. The last one I did I’d recommend a ratchet wrench for the 10mm bolt makes it easier
@13ghosts31
@13ghosts31 11 месяцев назад
@@Xploring_The_Outdoors GREAT. Thanks for the quick response. I’m doing this job this weekend.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 11 месяцев назад
I'll be back home for 2 weeks soon so if you got any questions shoot me a message.@@13ghosts31
@NicoPom4325
@NicoPom4325 10 месяцев назад
Thanks, worked for me. I tried without the ratcheting 10mm and almost got the last bolt out. I had to go buy the wrench and I'm glad I did. I would have never gotten it back in.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 10 месяцев назад
Awesome, been thinking about doing more videos on tips on the frontier I’ve learned
@thatsgame1
@thatsgame1 7 месяцев назад
Worked well. Didn’t want to have to removing intake. THANK YOU VERY MUCH.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 7 месяцев назад
Awesome glad to hear it was helpful for you. Thank you for watching
@luketwome
@luketwome 8 месяцев назад
Where did you get that tire step?
@Xploring_The_Outdoors
@Xploring_The_Outdoors 8 месяцев назад
I believe amazon $40 amzn.to/47Eo8hr
@IsolatedAura999
@IsolatedAura999 Год назад
Appreciate the video & the humor 🤙🏽
@flyingjeep911
@flyingjeep911 Год назад
Thanks. I thought your chickens were my chickens yelling
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Lol
@stangdriverus
@stangdriverus 2 месяца назад
I did this.. it wasn't bad.. thank you.. saved me time
@billykauffman1894
@billykauffman1894 Год назад
Anti-seize?
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
I didn’t use any
@stephenhumma4772
@stephenhumma4772 11 месяцев назад
Pugs actually look pretty good. No grease on the boots
@CornPopMillerJr
@CornPopMillerJr 5 месяцев назад
You got a sick Nissan bro! I'm on my 4th and there are 2 more I'll want in my lifetime.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 5 месяцев назад
Thank you, I love my truck
@donjohnstone9685
@donjohnstone9685 2 месяца назад
A well done video !! And without removing the intake !! Saved about 300 $ 1.5 hrs ! Thank you 😊
@Xploring_The_Outdoors
@Xploring_The_Outdoors 2 месяца назад
@@donjohnstone9685 no problem glad it was helpful to you
@jakestoe
@jakestoe Месяц назад
And you know, the mechanic would've done it just like this and charge you for removing the intake.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@jakestoe most likely
@reellifewithq572
@reellifewithq572 4 месяца назад
Great video! This helped me change out my own spark plugs! Thanks!
@Xploring_The_Outdoors
@Xploring_The_Outdoors 4 месяца назад
No problem glad it was helpful
@TheToufikzeidan
@TheToufikzeidan 11 месяцев назад
this guy is too brave. there is no way i can work my way into the last plug.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 11 месяцев назад
It’s not so bad, I’ve worked on worse
@richardnelson2217
@richardnelson2217 4 месяца назад
You can do it, i believe in you haha. You just need the right tools.
@b20nando
@b20nando 5 месяцев назад
Easier to just take off the upper plenum lol
@Xploring_The_Outdoors
@Xploring_The_Outdoors 5 месяцев назад
Nah I was done in less than an hour, I won’t ever take it off just to change the plugs
@Princefaro
@Princefaro 8 месяцев назад
Nice work. Thank you. That inspires me to do it your way the next time I change mine on the Frontier
@Xploring_The_Outdoors
@Xploring_The_Outdoors 8 месяцев назад
Glad to hear and thank you
@DeanWoerner
@DeanWoerner Месяц назад
I was just getting ready to start replacing the plugs on mine. It was a last minute decision since my wife is going out of town but I didn't realize everything that was involved. Appreciate all the work you did in this video to show the details and exactly what it takes to get these out. Thanks man
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@DeanWoerner no problem
@wedjatsantana
@wedjatsantana 6 месяцев назад
Thank you sir, very useful information.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 6 месяцев назад
No problem
@richguitar93
@richguitar93 Год назад
What is the gap setting?
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
I’d have to look it back up but the new plugs where set already so I just installed them
@richguitar93
@richguitar93 Год назад
anybody know? Great video
@richguitar93
@richguitar93 Год назад
It's .044
@richguitar93
@richguitar93 Год назад
@@Xploring_The_Outdoors It's ok. It's ,044 . Thanks
@bradjenkins932
@bradjenkins932 5 месяцев назад
@@Xploring_The_Outdoors LOL
@luismujica7917
@luismujica7917 Год назад
Awesome......Great video.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Thank you
@soleno74
@soleno74 5 месяцев назад
Dielectric grease please ….
@Xploring_The_Outdoors
@Xploring_The_Outdoors 5 месяцев назад
Never use it, never had any issues.
@scotsmanofnewengland7713
@scotsmanofnewengland7713 5 месяцев назад
Purchased my 2013 Frontier in 2014 with 8,000 miles. Hauled a dual axle travel trailer to Florida and back to New England twice, traveled all over New England and out to Minnesota by way of Canada and back home and no problems what so ever till this year 2024 and only 97,352 miles. The front catalytic converters needed to be replaced which is puzzling but that’s what the computer codes said. Well $2500. + later it runs good. Fingers crossed 🤞
@Xploring_The_Outdoors
@Xploring_The_Outdoors 5 месяцев назад
I haven’t had anything big or expensive go bad yet mostly sensors or idler pulley bearing. I stay on my maintenance though oil changes, tire rotations. Been a great truck
@LaMuerteLeather
@LaMuerteLeather 3 месяца назад
Still looks better to do than the 16 spark plugs I changed in my hellcat.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 3 месяца назад
lol I’d say so
@EdwardJuarez-v6e
@EdwardJuarez-v6e Месяц назад
Great video nobody wants to remove any of that other stuff these Japanese trucks are very sensitive
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@EdwardJuarez-v6e nope, when I remove the intake I’m changing valve covers & gaskets and fuel injectors while it’s off and out of my way
@joebenjamin6139
@joebenjamin6139 10 месяцев назад
That was great! Thanks for the tip,,
@Xploring_The_Outdoors
@Xploring_The_Outdoors 10 месяцев назад
No problem just trying to help
@carltongossett2282
@carltongossett2282 10 месяцев назад
Can you show me where the Map sensor is located on your v6 4.0 please
@OldSchoolMikey
@OldSchoolMikey Год назад
Did the plugs look very worn from the mileage? My truck has 54,000 as I type this and I'm trying to watch every video out there on this procedure so I can try and tackle it later on!
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Not to bad I had over 100,000 when I changed them.
@acey152
@acey152 2 месяца назад
It's better than the 4 cylinder spark plugs.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 2 месяца назад
@@acey152 I haven’t seen those done yet
@dandebbieminert5712
@dandebbieminert5712 3 месяца назад
That 'original' plug is double iridium and and the electrodes are in awesome condition. Either it would last the lifetime of the truck or somebody already changed it?
@Xploring_The_Outdoors
@Xploring_The_Outdoors 3 месяца назад
@@dandebbieminert5712 I’m the only owner
@carltongossett2282
@carltongossett2282 10 месяцев назад
Thanks I have a nessan extra V6 now I can change the plugs without taking all that junk off thanks 👍
@Xploring_The_Outdoors
@Xploring_The_Outdoors 10 месяцев назад
No problem
@johnwilson1856
@johnwilson1856 7 месяцев назад
I need a brushguard like yours for mine...what brand is that??
@Xploring_The_Outdoors
@Xploring_The_Outdoors 7 месяцев назад
ARB bumper
@alexross8722
@alexross8722 6 месяцев назад
A little late to the game but changing mine at 172k and didn't want to remove the plenum! I removed one of my plugs and it didn't look too bad, but will change. Possibly going to go with NGK HX Ruthenium plugs since I'm not paying for labor, ha! Thanks for the reassurance that it's possible albeit a little challenging. Appreciate the ratcheting 10mm wrench and 1/4" extension tip for that last bugger plug! I think I might do that one first just to get it over with!
@Xploring_The_Outdoors
@Xploring_The_Outdoors 6 месяцев назад
No problem, it really wasn’t as bad as some made it out.
@3RAN7ON
@3RAN7ON 5 месяцев назад
I always do the most difficult one first. Once you get that done, the rest is a breeze!
@alexross8722
@alexross8722 5 месяцев назад
@@3RAN7ON That's what I did! It took me 1-1/2 hours to change out 6, 5 & 4, but only 20 minutes to do 1, 2 and 3!
@neilyakuza6595
@neilyakuza6595 10 месяцев назад
Awesome video. Thanks. I have to do my Xterra.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 10 месяцев назад
Thanks hopefully goes smoothly for ya
@danielfirmin1498
@danielfirmin1498 7 месяцев назад
Gonna attempt this soon. Thanks for showing how to do it this way
@Xploring_The_Outdoors
@Xploring_The_Outdoors 7 месяцев назад
No problem
@Elserg1876
@Elserg1876 5 месяцев назад
Thanks for the video and I tried it and it worked fine
@Xploring_The_Outdoors
@Xploring_The_Outdoors 5 месяцев назад
No problem and glad to hear
@PedroMartinez-nv7mz
@PedroMartinez-nv7mz 3 месяца назад
Great🎉
@SalguodIan
@SalguodIan 3 месяца назад
This video saved my ass.
@Xploring_The_Outdoors
@Xploring_The_Outdoors 3 месяца назад
And these comments are the reason I make videos, all about sharing tips and tricks to help out
@alecdsm
@alecdsm Год назад
Good shit
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
Thank ya
@nathancovington8517
@nathancovington8517 Месяц назад
Lied and un true
@Xploring_The_Outdoors
@Xploring_The_Outdoors Месяц назад
@@nathancovington8517 explain? Seems lots have done it and found it helpful
@dickhassett8093
@dickhassett8093 Год назад
Yea I tried this and it ain't gonna happen.
@Xploring_The_Outdoors
@Xploring_The_Outdoors Год назад
It’s really not that hard
Далее
2005-2019 Nissan Frontier - What You Need To Know
14:42
Шоколадная девочка
00:23
Просмотров 821 тыс.
ВЫЗВАЛ ЗЛОГО СОНИКА #Shorts
00:38
Просмотров 58 тыс.
The Best Spark Plugs in the World and Why
8:38
Просмотров 4,6 млн
Increasing Fuel Economy in the VQ40
23:07
Просмотров 27 тыс.
Here’s Why Nissans Have Engine Problems
10:08
Просмотров 603 тыс.
SPARK PLUGS DONT LIE / HOW TO READ SPARK PLUGS
6:30
Просмотров 741 тыс.
Nissan Frontier 4.0L V6 Spark Plug Replacement DIY
18:45