How to CHANGE the OIL on 2019-2021 Yamaha YZF-R3

Подписаться 2,5 тыс.

Просмотров 35 тыс.

50% 1

Changing out the oil on your 2019-2021 Yamaha R3 is pretty straightforward and much easier than the previous gen models as you do not have to remove any fairings! You only need a few tools and parts.
Things Needs:
Yamalube 10w-40 - www.partzilla.com/product/yam...
^OEM Part LUB-10W40-AP-04^
Yamaha Oil Filter - www.partzilla.com/product/yam...
^OEM Part 5GH-13440-60-00^
Yamaha Oil Drain Bolt Crush Washer - www.partzilla.com/product/yam...
^OEM Part 214-11198-01-00^
Torque Wrench: amzn.to/38fLP38
12mm Socket
Oil Filter Wrench - www.revzilla.com/motorcycle/b...
Oil Drain Pan - amzn.to/2KgRnlT
Oil Funnel - amzn.to/3aqeLIu
Shop Towels - amzn.to/3aBuzZ1
Torque Specs:
Oil Drain Bolt - 20Nm (14ft-lbs) - I would set your torque wrench to slightly less to avoid stripping
Oil Filter - 17 Nm (12 ft-lbs)
Oil Drain Bolt Size - M12 x 1.5 x 15mm
Recommended Oil Drain Bolt Replacement - bit.ly/3mTwDz3
Engine oil quantity/capacity:
Without oil filter cartridge replacement:1.80 L (1.90 US qt, 1.58 Imp.qt)
With oil filter cartridge replacement:2.10 L (2.22 US qt, 1.85 Imp.qt)

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@ilyavolk5245 3 года назад

Simple and to the point. Thank you!

@moto.obsession 3 года назад

Thanks!

@denesealayon8182 2 года назад

I just recently purchased a 2021 R3. Thank you for this video man. It is straightforward and informative. I'm looking forward on changing my oil as well by myself.

@tmrocks9204 2 года назад

Appreciate it! Doing first oil change today on my 2021 I snagged this past summer.

@breal2355 3 года назад

Not only was your video helpful your info posted after and links was even more helpful thank you !

@moto.obsession 3 года назад

Glad to help out!

@dafnemorenovargas1597 2 года назад

Thanks for the clear explanation, I can't belive they made me pay $370 CA on my first two services for something this easy, I would never pay that much again :)

@moto.obsession 2 года назад

Wow, yep, you could save a bit if you are comfortable with doing the work!

@Marni-jv7wg Год назад

@@moto.obsession Minum

@pablolloreda5347 2 года назад

Awesome video, brother. I usually run the engine before to warm up the oil, so that it all comes out. I've had issue with bikes and holding onto oil and not having a level to tell me where it's at, causing over filling. Anyway, this is thorough as hell, thank you.

@moto.obsession 2 года назад

Great tip, I do the same with my motorcycle and cars! Just edited it out for time sake in the video.

@JesusRodriguez-yf2or 5 месяцев назад

Thank you very much, your video is absolutely helpful, god bless you 🙏

@keeplivingmotovlog 6 месяцев назад

I just started my motovlog.Thanks for the tips.

@JagMoto636 3 года назад

Great vid bro thanks!

@moto.obsession 3 года назад

Hope it helps out!

@DmGCLUTCH 2 года назад

Great video man.. I'm due for my first service. But some local shops are charging an arm and a leg. I might as well buying all the stuff myself and save the money

@moto.obsession 2 года назад

more money to spend on fun stuff :)

@ichbinototronik5880 2 года назад

Before the buying motorcycle I had to know this, thanks.

@victyper301 Год назад

I had to rewatch this since I’m bout a do mine first engine break in oil change. But u don’t need to warm up the bike. U just have to open the oil cap so gravity take it out. And warming it up u just putting the dirty oil back on top of engine block. As a master mechanic that how I change my cars and especially bike.

@nightfury6836 2 года назад

AWESOME video. Thank you!!! Enjoy your bike ;-)

@moto.obsession 2 года назад

Thanks! 👍

@SchecterMongoose 8 месяцев назад

You will definitely need an oil filter wrench if it's your 600mi oil change. Yamaha practically welds it to the engine from the factory.

@camiloglifestyle823 3 года назад

Great video man, would you consider the Yamaha frame sliders or TST? And what about a bigger tire like a 160 or a aftermarket rim 5.5 with an 180 ?

@moto.obsession 3 года назад

I think the Womet-Tech ones are pretty solid for the price. You do have to cut the fairings though so unless you have the proper tools, it may not look very clean. Getting a 150 wide on the back is one of my next changes, not a fan of how skinny the rear tire is.

@nearsite Год назад

Thank you so much for this video! Where do you get rid of the oil?

@moto.obsession Год назад

My local auto stores allow recycling oil there for free

@blank_1825 2 месяца назад

Hey the link for the oil drain plug does work I was wondering if you had another one?

@dirtyharry292 3 года назад

Thanks for the video. I was shown (on cars) to remove the bolt first then do the filter after most of the oil had drained. Any reason why you've done it the other way around? Also - what bike stand do you have? Thanks

@moto.obsession 3 года назад

No particular reason, it really shouldn’t matter too much but since the drain bolt is usually lower on the motor, I like to remove it last.

@IndyPatriot 3 года назад

Nice video! Gonna save a lot if money this way. I do have a question I am a new rider my R3 is my first bike and I was just out on a ride today and the oil light came on. It has about 650 miles on it so far I am doing the oil change this week. Only concern I have is even when I’m leaving the engine running I even took the bike to the right a little bit but I do not see any oil on the indicator at the lower part of the engine even when tilting the bike while the bike is running. Shouldn’t I see something inside the The window? Any help would be greatly appreciated

@moto.obsession 3 года назад

Yes you should see oil in the window. If you don’t, I wouldn’t ride it until you fill up the oil and diagnose the problem if there is one.

@52tay 3 года назад

Xe của bạn thật là đẹp (Vietnamese)

@moto.obsession 3 года назад

Thanks, it's pretty rare to see in the pearl white color!

@acceptjesuschrist4132 2 года назад

Does it matter if my yamalube says four stroke 10w-40

@westcoastbrotha 3 года назад

How does someone better understand the “nutimeters” or what that term was that you used? Would I be good just tightening it to a good degree to where it feels like it’s on good enough?

@moto.obsession 3 года назад

It's just a measurement of force, in the US, we go by Foot-Pounds instead of Newton Meters. en.wikipedia.org/wiki/Newton-metre

@Jxrdan.w 6 месяцев назад

I recently got my 2020 R3. Where did you get your bar ends and frame and axel sljders from?

@hyderal656 3 года назад

Hey buddy, what size is that crush washer you replaced ? thanks for the video.

@moto.obsession 3 года назад

I don’t know the exact size but it’s this part from Yamaha: www.partzilla.com/product/yamaha/214-11198-01-00

@HDTTW78 7 месяцев назад

Buddy of mine tried changing oil on his bike and turns out the filter is reverse threaded, clockwise to remove. Took way too long to figure that one out (TX, USA)

@weeniee9774 3 года назад

👍

@adrianb1655 Год назад

Does anyone know the size of the crush bolt or washer?

@johannmaxiellecortez7089 7 месяцев назад

What does the oil filter for r3 called?

@EXOVVILLARUEL 10 месяцев назад

I like white 🤍 r3

@Alexpr54 2 года назад

How often should I change it?

@kuletz171 4 часа назад

Does this apply for yamaha R3 2024?

@user-ux3qg3wd1i Год назад

Anyone know how to reset the oil light ?

@LuisRuiz-bm3sw 2 года назад

So what does it mean when the little oil display on the screen is flashing on and off.

@moto.obsession 2 года назад

It will usually flash when you first start your motorcycle. Would be a bigger concern if the light stayed on.

@farishenderson5738 3 года назад

I over filled the oil how can I drain abit without unplug the drain plug ??

@moto.obsession 3 года назад

Just open the plug a little bit (not taking it fully off) to let some drain out and then tighten it back on, that's what I've done in the past.

@victyper301 Год назад

He forgot to say u only fill it up to the top line if u didn’t put some oil into the filter before screwing it back on

@elricaguilar6693 3 года назад

Does the oil have to be at the top line of the oil gauge while it’s on or off?

@moto.obsession 3 года назад

I like to have it at the line while cold

@elricaguilar6693 3 года назад

@@moto.obsession thanks bro !

@magic.4234 3 года назад

I need the 4k oil change. Is that a scam or is it a oil change. Yamaha said it's $400.

@moto.obsession 3 года назад

Some people like to get their maintenance done at the dealer but an oil change is pretty straightforward and the R3 isn’t a premium bike needing special attention for maintenance. The more you know how to work on your own bike the better especially if you plan on doing track days down the road.

@copdini 3 года назад

Can I reuse the washer?

@moto.obsession 3 года назад

Probably wouldn’t recommend it

@eliansaul6814 Год назад

Order from them and they switched my filter to 5gh 13440 80 they claim its the same i say bs its not the same size

@69chingonkid Год назад

Make more videos if you can 😢

@moto.obsession Год назад

Hopefully soon 🤞

@qkankii.6542 3 года назад

How much liters do u need to fill it up

@moto.obsession 3 года назад

Here in America we prefer less precise measurements

@derickbalualua1921 Год назад

What kind of rear stand do you have in this video?

@moto.obsession Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ee3L3yHwfZo.html

@moto.obsession Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ee3L3yHwfZo.html

@TONYSTARK-jh2wu 2 года назад

Ok what about the light reset

@fatbongripz4207 2 года назад

same way as v1 R3. click through the display til it says Trip then hold the reset button and then click it again

@LIGHTWARRIOR678 2 года назад

What type of oil is it?

@moto.obsession 2 года назад

It's Yamalube 10w-40

@matthewsilva7226 2 года назад

Quick question , about how many miles does the bike run before having to do an oil change again , just got mine that’s why I’m asking and the oil light started blinking after having it for just 1 month

@babywueso Год назад

600miles is the break In, check your manual for the manufacture recommendations

@tmrocks9204 2 года назад

To think I was about to spend $100 taking my bike in fir it’s first…

@moto.obsession 2 года назад

Yep, you can then use the extra cash to spend on fun stuff for your motorcycle :)

@jpb16b 5 месяцев назад

you should learn how to be a mechanic first if u want to be teaching other people how to do some things like this you should get certified. wrong procedure.

@moto.obsession 4 месяца назад

You don’t have to be a certified mechanic to change your oil and filter 😂 The steps I outlined in the video are straight from the Yamaha service manual: www.yamaha-motor.co.th/docs/owner-manual/commuter/en/r3-en.pdf?Status=Master&sfvrsn=76dfe7c6_4#page60