How to Check 2.0T TSI Timing Chain Tensioner

Подписаться 918 тыс.

Просмотров 260 тыс.

50% 1

Do you know how to Check 2.0T TSI Timing Chain Tensioner. If you drive an 2.0t TSI Audi or VW you may have timing chain tensioner issues. Checking the timing chain tensioner is an EASY DIY! Today I will show you how to check for the older timing chain tensioner that will need to be replaced.
For full show notes visit the blog at ~ humblemechanic.com/?p=6006
Sponsor of the day ~ ShopDAP.com
Shout out to Apex Tuning ~ apex-tuning.com/
Join me today as we learn how to check your timing chain tensioner:
~Shout out to Apex Tuning
~Tools needed
~DIY timing chain tensioner inspection on the bench
~How to hold the inspection mirror to check timing chain tensioner
~What tensioners are bad
~How TSI timing chain tensioners fail ~ humblemechanic.com/2015/05/05/...
~Replace the inspection plug
~TSI Timing Chain Repair kit ~ deutscheautoparts.com/tsi-tim...
~Audi TSI inspection
~How to check TSI timing chain on the car
~and more
Humble Mechanic Podcasts
• The Humble Mechanic Po...
Project White Wookie ~ MK3 GTI Videos
• MK3 Project Car Walk A...
Failed VW parts videos
• How VW Parts Fail
Tool Reviews
• Tool and Product Reviews
How To videos
• How To Fix Your Car
MK1 VR6 Swap Videos
• VR6 Engine Swap MK1 Ca...
Follow me on:
The Blog
humblemechanic.com
INSTAGRAM
/ humblemechanic
FACEBOOK
/ humblemechanic
TWITTER
/ humblemechanic
GOOD STUFF ON AMAZON
goo.gl/5304Qw (affiliate)

Авто/Мото

Опубликовано:

11 янв 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 309

@kevinmiller6170 4 года назад

Great info on how to check but would be much better if you showed what we are actually looking for to see if it's the old or updated tensioner.

@HighshotsMedia 3 года назад

seriously, useless video

@lenwitte 8 лет назад

Great video. I don't have one of those engines but showing the part on the bench and in the car is a great illustration.

@onlydavid 8 лет назад

Thank you so much for following up on this, sir.

@HumbleMechanic 8 лет назад

+davy You are welcome. Glad to help.

@Hoolibumbum 6 лет назад

Great video. Do you know the part no. for the inspection hole plug?

@chuckashton9688 8 лет назад

Charles is my 2013 GTI Feb 2013 build likely to have the new or old style tensioner? I've got a few more years of power-train warranty left. Should I have this checked now or hold off & let the warranty cover me if things go pear shaped? Thanks enjoy your shows I've learned a lot.

@flippegi 8 лет назад

great video!

@HumbleMechanic 8 лет назад

+flippegi Thank you :)

@thirteen2342 7 лет назад

I own a mk6 gti with the cczb engine 1st registered 25th June 2010. I did this check today & found it to be the faulty tensioner, getting it changed in a couple of days at the cost of £390. mine has just done 70k miles & I've had no problem so far but changing it for piece of mind. Thanks for putting this video on, it really helped.

@HumbleMechanic 7 лет назад

awesome glad to help

@1petrofski 6 лет назад

Mine went at 60k miles after noisy startups for a year or so. Cold start in morning fired and engine cut out knew exactly what happened. Currently at workshop waiting for damage report. Sucks as was big VW fan and lived the ride. Thnks for video Humblemechanic #sadlyvwg6fan

@rmetanes 5 лет назад

@@1petrofski what was the damage?

@gee3883 5 месяцев назад

Very helpful cheers dude.

@jimmyosterlund2538 8 лет назад

Hi ihave a golf mk6 2012 1.2 TSI, would you recommend to change the Timing Chain Tensioner on it? I do not think it looks the same as in your video on the 1.2 tsi? it is only driven 30000km. Great video btw! :)

@jeepcollector91 6 лет назад

It was all the little issues like this one that finally convinced me to sell my 2010 VW EOS. Sold the car last month for $8,000 with just over 89k miles. Then I put the cheap and reliable '91 Mazda Miata back on the road. Your videos did help me a lot with diagnosing and completing repairs for many of the other issues. As well as pointing out some things that VW ended up covering like the replacement intake manifold. Thanks for that.

@orangelion03 6 лет назад

I own a 2010 Passat Wagon w/106K...just replaced water pump, injectors under warranty, a coil under warranty, and I have a valve cover gasket leak for which the dealer is suggesting I pony up $2000 to fix (replacing serpentine belt etc.) now I learn about this tensioner issue. Makes me wish I still had my 1990 Miata that I sold with 235K. Spent more on the VW water pump replacement than I ever put in TOTAL on the Miata.

@mattmarion6442 4 года назад

Charles: Does mileage make any difference in the decision of when to have this done? My 2009 Audi TT (CCTA engine) has about 34,000 on the odometer, and I'm trying to get a sense of whether this is a do "ASAP" or "in another 10k - 20k. Thanks.

@carlalm6100 5 лет назад

Very well made video showing how to look, and I know you have another video on the subject, but specifics of what to look for would be nice =)

@HumbleMechanic 5 лет назад

If it’s the old style it needs to be replaced. I feel like we covered that pretty well.

@dimitris1453 5 лет назад

@@HumbleMechanic is any videos on how to replace the tensioner??? Thank you

@streezyrider121 4 года назад

@@HumbleMechanic So thats what an old one looks like. Whatd the new one look like? What differentiates the two?

@blanchetteserviceauto2162 5 месяцев назад

yes but what is the difference between the old and the new? How can we tell? @@HumbleMechanic

@SouthMainAuto 8 лет назад

I don't work on VW's so what goes wrong with the old style or why is it necessary to have to inspect and change it?

@HumbleMechanic 8 лет назад

They tend to come apart and cause the timing chain to lose tension. That generally makes for bent valves

@briansmobile1 8 лет назад

+HumbleMechanic The older CBR F4i bikes do the same thing, but they're super noisy first.... fortunately.

@rmetanes 5 лет назад

@@HumbleMechanic didn't vw make a recall on these tensioners and replace them for customers?

@MaxCohagen 5 лет назад

@@rmetanes iguess didnt, they dont like customers just their money

@timothybrockett2636 7 лет назад

Do you have a video of 2008 Vw Tiguan timing set ? I could really use the help. What manual do you recommend?

@MrErikw26 7 лет назад

Just checked out the link for the tensioner repair kit from DAP, not nearly as pricey as I thought it would be.

@avinashclt 8 лет назад

Would this be applicable for a 1.8TSI CDAA motor also? I believe the engine is quite similar to a 2.0TSI.

@bikuta29 8 лет назад

Like the vids bro 👍🏼

@IamMagPie 6 лет назад

I like the design of the timing chain tensioner on the R53 MINI Cooper S. You unscrew a bolt, and out comes the tensioner (looks like a battery). You pop the new one in, and screw back the cap/bolt. Voila!

@omarcruz5932 3 года назад

Would it be possible for you to make a video about how to replace crankshaft seal on the lower timing chain cover?

@MassiveLoop 7 лет назад

Instead of struggling with the inspection mirror I used a cheap scope cam with LED lights hooked to my Android and was quite effective.

@HumbleMechanic 7 лет назад

+Massive Loop with how cheap and good scopes are today that's a great idea

@dinokarakostas6407 3 месяца назад

What are we supposed to look for on the tensioner?@@HumbleMechanic

@MelodicMurder 8 лет назад

Great video as always. I cant find any information on when to change the timing chain on my 2012 gti CCTA, do you know? Also, what else would you change when doing that job?

@HumbleMechanic 8 лет назад

+MelodicMurder There is not a service interval. At this point I think if you have the older style tensioner, like I show in the video, it's time for a replacement. There is a link in the description to ShopDAP. They have a kit with all the stuff you need.

@MelodicMurder 8 лет назад

+HumbleMechanic Thanks for getting back to me. I'll have to put that on my list to do and that diy kit from DAP looks awesome. Do you think you can make a how to video for the kit? That would rock. I also want to do an oil catch can and get a vag com. I must admit i do love my CCTA especially after i had it tuned by APR. It makes me want to hit 300k miles with this car :)

@mattl.5998 8 лет назад

is it possible to look up the VIN number on a 2012 CC 2.0t to determine what timing chain tensioner is installed or still a crap shoot? also, do you think a VW dealership would gladly check it for me so they wont have to replace the engine in case it does fail while under warranty? thank you and i appreciate all of the hard work and time that you put into these videos! i really appreciate it!

@HumbleMechanic 8 лет назад

+Matthew Lindsey something like that will not show up on a VIN check. Only way to be 100% sure is to inspect the tensioner

@APickle214 6 лет назад

hey i could really use some advice, just a broke college student tryna fix my method of getting to work. Thanks for the helpful videos!

@StopDropandLOL 8 лет назад

You got yourself a nice little shiner on your left eye there Charles ;)

@Labios_Rotos 3 года назад

Hey man do I need to replace the timing chain tensioner and chain only? A bunch of quotes I am getting are saying to change the "cam bridge, balance shaft chain, multiple tensioners" etc. PLEASE HELP!

@billbmsn 7 лет назад

Am I correct in understanding that the failure mode for the early tensioner is that the band covering that ratchet pawl comes off? If so, wouldn't putting a metal band tie wrap around the tensioner prevent this from happening? It could be a relatively simple fix, especially if it could be done through the inspection hole. I thoroughly enjoy your videos. -Bill

@hulk6164 2 года назад

I would also like an answer to this

@BobSmith-mc7uq 2 года назад

@@hulk6164 Not going to happen with the cover on the engine, not enough room. Just finished looking at an 09 2.0 TSI CCTA tensioner on the car, not a fun job with the turbo pipe & oil down side of the engine! If you had the cover off, sure, but why not just go ahead & put on a revised tensioner?

@trancemiro 8 лет назад

Great video thanks! I have already replaced my tensioner it wasnt bad if you get all necessary tool. Took me around 7 hours but i did take my time with it. Isn't it save to assume that pretty much anything made before 2013 has old tensioner? 2013 is the year to check as you might or might not have old tensioner.

@HumbleMechanic 8 лет назад

+trancemiro It should be, but for how easy this is to check, I think it's worth making 100% sure.

@786hunzavalley 5 лет назад

Hi My car (golf 1.4 tsi mk5 66000 miles) is showing error p3008. Initially the error code p000A appeared. I changed camshaft sensor then code p3008 came up. Most of the people are saying that timing chain needs to replace. It was fine , I just changed water pump because it was leaking, and new drive belts, with engine oil service , dsg service & spark plugs. After all this work when I started my car a code p000A appeared, then changed camshaft sensor, camshaft adjuster valve, after 5 minutes a new code p3008 came up, car starts but idle rough. When press acceleration it vibrates very heavily. What do you think might be the problem?

@phineasndhlovu7048 6 лет назад

Well well I like it guyz

@jessieismyfriend 5 лет назад

if the motor is in a quattro (a4) is it easy to check or do you have to take the whole front end off like in my 2.7L bi-turbo quattro (a6)...... just to get to that area...

@NachoTV 8 лет назад

I don't have a VW yet but this is interesting. I do hope to acquire a classic bug someday.

@HumbleMechanic 8 лет назад

+Nacho TV AWESOME! That is on my list too. Or a type 3

@DB-tf6vv 5 лет назад

I had the water pump replaced just after I bout the CC. So, My mechanic told me that one of the tensioners looked to be a problem in the future, so I know I have to replace these asap, Btw VW has 123000 miles. The timing chain is all good. I have been driving very little so as to not have a catastrophic engine failure. Local VW dealer quoted me ...... 1500.00 bucks to do chain and tensioners. Whats your recomendation?

@-a6833 Год назад

Does taking on the inspection cap mean you have to then replace that with a new inspection cap? Or can you put the old cap back on if you're careful enough? Because for the life of me I cannot find where to buy those things anywhere remotely close to where I live

@MrUnknown747 6 лет назад

I have a 2014 Tiguan. Am i safe? I know checking is the 100% way of making sure but still, generally?

@donaldhollums3278 6 лет назад

HM, do you have a film on replacing the tensioner on this engine in a 2009 Passat?

@danniss9794 8 лет назад

hey! i just bought a Audi A4 b8 1.8 tfsi 2008/9 and it sounds like a diesel when its cold start, and im afraid my TCT is old ;/ if its possible can you show how the new one look like? :) many thanks from Denmark!

@mohamedhedimizaoui7720 5 лет назад

HI i need to replace a CCZA engine but can't find a used one. can i install instead CAWB or CCTA ?

@rishabhsaxena5039 7 лет назад

sir some people say to replace the oil pump chain and it's tensioner as well, but is it really needed cause have heard no issues with it ? and is the timing cover replacement necessary after changing the timing chains and tensioner or the old one can do ? Thanks in advance

@ACitizenOfOurWorld 7 лет назад

Replace the cover (if you bent it while prying it off) to be sure you don't get oil leaks. The other parts should be replaced around 150,000mi as a regular maintenance item since as you said, no issues.

@Mtechthewise 8 лет назад

excellent application for one of the cheap usb inspection cameras from ebay, mirrors are so 1970's

@mattl.5998 8 лет назад

Thank you. You mentioned that they are on the 4th revision on these I do believe. And it is the one with the part number with the "k"? What if the original owner had a newer one instead of the original from the factory. Let's say the second or third revision. . Are they any Better than the first/original?

@ivayloipetkov 4 года назад

Before july 2014 - change it. After july 2014 - do nothing

@robertwymer2919 8 лет назад

hey man just got a 2006 a4 2.0t, definitely some clicking to the motor and it's more than likely this. I just picked up the car and is being worked on by Audi as of now. I have a warranty on the car and was wondering if you'd think they would at least look at it and tell me if it needs replacing. what do you think?

@Maybederrepente 7 лет назад

have you heard of the timing chain (cam chain ) tensioner ?? seems to be really common among these cars . I have the same issue some clicking noise.

@nicosavalos2568 5 лет назад

Hey HumbleMechanic. I would be really interested to hear what you have to say about the 1.4L TSI? I personally have a 2017 1.4L TSI S and am getting tools and learning how to take care of and do maintenance on it.

@johnnyfiorello 7 лет назад

i HAVE A 2006 gLI with the knocking on the top end is there a video you have about it ?

@dobarlos1381 6 лет назад

My 2012 Jetta 2.0 tsi build date July 2012,engine build date jun 2012 has new version tensioner but my mechanic didn’t put new tension plug in ,the old one looked like new

@backupperspro5443 6 лет назад

Is it necessary to change the chain as well as de tensioner? Or changing the tensioner is enough to avoid problems? I have a Jetta 2.0 TSI 2012 DSG.. Many thks.

@ivayloipetkov 4 года назад

Tensioner alone is fine. If you plan to keep the car for another 50-70 000 miles do the chain and the gears as well

@Greenleafinc 2 года назад

DUDE! where did you get that work mat?!

@senco981 6 лет назад

Hello Charles. Very good videos, thanks for helping out. Little off topic if you don't mind. I have 2011 Tiguan that developed engine shake and engine light on. Scanned for misfire cyl 1. Got four new coils from Pepboys and problem fixed. Couple days later noticed light engine shake when in drive also seams like idling is high, 700-800 RPM. Any thoughts Thanks

@HumbleMechanic 6 лет назад

What about spark plugs?

@HumbleMechanic 6 лет назад

Or possible carbon buildup

@senco981 6 лет назад

I was thinking about that, but what coincidence that happened 1 day after coils replacement? Could it be generic coils, should I buy Bosch? Thanks

@sondersaga1366 2 года назад

Are you getting any other error codes? I had the same problem and replaced the intake manifold and sealed a vacuum leak. Fixed all of my misfire codes

@keepadventuring 3 года назад

Best place for a tensioner kit that has everything ? CPLA Thank you

@spinnetti 8 лет назад

Question on that.. I still have a bit of warranty time left - will VW only cover if it actually fails or can this get checked and fixed before blowing the motor?

@HumbleMechanic 8 лет назад

+spinnetti They will only cover it if it is failed, or failing. They may cover it if the tensioner is making noise.....

@spinnetti 8 лет назад

Thanks for the reply...

@aRjayC28 7 лет назад

hey charles thanks for the video, would this process be the same for the tfsi engine as well? trying to check if I need to change the tensioner on my 06 audi a3 2.0t. Thanks.

@HumbleMechanic 7 лет назад

+Arjay Canon yes. The TFSI and TSI are the same.

@aRjayC28 7 лет назад

Alright thank you much appreciated!!!

@1petrofski 6 лет назад

Jack Attack my tensioner went recently. Only indication was startup noise on turning ignition where car grumbles like a tractor for 1-2 seconds as the oil is not lubricating something in the cam. This sound is very noticeable and went on for about 2 years. VW dealership here wasn't interested during warranty period at services and just bluffed something about the tappets making that noise oh nothing to worry about. Hope this helps

@thomasragagli2073 6 лет назад

Make some more videos for the fsi

@ciaphas2037 7 лет назад

This timing chain tensioner issue seems to be widespread on VAG TSI engines of a certain age. Does the same process apply to the 1.4 TSI engines? (asking regarding an Octavia engine, but they seem to be functionally identical in this respect)

@nrtolv 5 лет назад

Late answer, but yes, I've changed the tensioner, including both chain, guard rails, the cam gear for the exhaust side and some different seals. This was an insurance job we had. Complaints of noise and low driveability, had some engine codes about cam timings were off and such. I don't know if the tensioner is the same as the US, but the possible outcomes pretty much looks the same.

@seanyoungman6040 7 лет назад

I own a seat Leon with the 2.0 tsi engine, I have engine management light on. cam/ crank sensor incorrect corrolation poo16 code. engine starts up and runs fine just takes a few seconds turning over. no knocking or strange sounds to indicate a slack chain. is this related to timing chain tensioner failing or could this be a stretched chain or tensioners maxed out? I find it hard to believe a timing chain fault on a engine with only 60k miles although watching the videos it seems pretty common. do you have a video on timing these engines up?

@huntnman 6 лет назад

Yo, I see a couple of stickers from Oskaer Blues Brewery! Just down the street from me. Are you in Colorado?

@HumbleMechanic 6 лет назад

+Tony Kiser nice. OB is awesome. I live in NC. Been to the one here .

@huntnman 6 лет назад

HumbleMechanic didn't know thy had one there. Cool!

@edwardcastro8213 4 года назад

What year model TS I have the tensioner issue

@saulocoelho5513 Год назад

Hi, when I'm going to check this tensioner I use my cellphone to take a photo of It!

@mcseforsale 4 года назад

Charles, quick question. My '10 CC just came back from a $4809 timing chain failure (covered by my extended warranty ). The note that confused me was this: "FOUND SCREEN IN CAMSHAFT SUPPORT MISSING. INTAKE CAMSHAFT REPLACED". Is this the next popular failure, or is this a part of the TCT failure? Oh, and I had 82 miles left on my warranty. :D

@HumbleMechanic 4 года назад

Yep very popular failure. The screen comes out and gets lodged in the oil galley. That blocks oil to the back side of the intake came

@HumbleMechanic 4 года назад

Cam

@mcseforsale 4 года назад

@@HumbleMechanic - Is that part of the warranty from VW? They were going to pro-rate my repair, but I'd purchased a personal warranty. So, I got away with deductible only.

@Dark5tar111 4 года назад

Is it based on particular year model? E.g. Would the 2012 version has a revised version where you don't need to fix it?

@HumbleMechanic 4 года назад

2013 and up should have new style. I’d still worry about the chain wear”stretch”

@teenager171 5 лет назад

From which year VW installed New version of the tensioner on 2.0 TSI?

@ivayloipetkov 4 года назад

July 2014

@MrUnknown747 4 года назад

Do you know which model years have the updated tensioner? I have a 2014 tiguan

@HumbleMechanic 4 года назад

2012 is supposed to be the last year of the old style. But I’d check anyway

@gglovato 8 лет назад

something i always wonder if the cars(jetta and up) will ever have a "asset manifest" database in one of the control units, loaded at the factory that shows an exact and TOTAL part list installed, so you don't need anything else than a VCDS or scantool to check which part numbers you have installed... granted, when replacing a part the dealer/shop would need to update that table/database with the new value(or DIYers). A step further would be extending the service interval counter for other known wear parts with a predefined interval, that way the MFD reads "TB service interval soon" or "replace TB" then the dealer already knows the parts needed or which one it had without even opening the hood. maybe it's a pipe dream but i find it silly that i can't find a manifest of the parts of my car publicly available even decoding the VIN and 3 letter matrix of options.

@blower1 8 лет назад

+Guillermo Lovato That would require a level of consistency and management that VW (or many other manufacturers) simply do not have. You only have to be a user of VW's ETKA parts database over time to see inconsistencies on when X model of manufacture is supposed to have Y revision of parts. They often will substitute a part with a different part number on one production run to the next - probably because they have run out of the one that's supposed to be in there. I have seen this personally on my car with O2 sensors & MAP sensors. The actual O2 sensor on my 2010 1.4TSI is not listed as the correct part at any point for my engine throughout the history of it, but its an acceptable substitute.

@gglovato 8 лет назад

blower i have used ETKA briefly in the past, and also ELSAweb(until VW lawyered them to close the site regretfuly as that info should be publicly available) and yes they're a pain to use!. specially when you have a part where the last letter changes the car it goes to!, for example, 038128063G / L is for my car, byt J/Q are for the suran(iirc) and M depending on where i check says compatible but on other places it says it's not and the last revision of the part is L (elsa shows L as last compatbiel revision)!, sheer crazyness!

@samuelchung7783 7 лет назад

could you do a bunch of videos on the 1.4 tsi?

@HumbleMechanic 7 лет назад

I can try. We haven't seen many issues with the 1.4 yet. But there is time LOL

@samuelchung7783 7 лет назад

Hiya! Loved your videos ever since I stumbled upon them along with @EngineeringExplained! I ask this only cause i want to learn more about what's in my car haha! its a 1.4 TSI on a volkswagen jetta. Cheers!

@lolzim8888 7 лет назад

really? i have seen alot 1.4 tsi`s with bend valves....

@jaymoney7968 3 года назад

If ur 2010 2.0 tsi sounds like a diesel running,,,not all the time but sometimes it's loud I herd it's because of the tensioner,is that a possibility

@danielvillegas6095 7 лет назад

Hello friend, I'll be brief, I'm repairing a TFSI engine and I get with a problem, the tensioner comes out all the tensioner, and when I turn the crankshaft, the chain jumps on the cam, you could help me with that problem that I have.

@elauzille 6 лет назад

Do you need to take off the cam shaft "girdle" to be able to change the timing chain or the tensioner?

@simon2knine Год назад

Better late than never...But no

@DemasShopforEverything 7 лет назад

Can I find this out by calling the dealer and they can tell me by the vin number if I have the old one or the new style tensioner?

@HumbleMechanic 7 лет назад

+Dema's WoodShop sadly no. They will only be guessing

@DemasShopforEverything 7 лет назад

HumbleMechanic well that sux, so if don't have the 06K-109-467-K than I need to replace it, I have 51k miles on 2012 gti

@eeiko321 6 лет назад

whats the part number for the timing chain tensioner cap?

@DB-tf6vv 5 лет назад

I have a 2010 VW CC Luxury Sport with 2.0 tsi engine. Does my car have old tensioners or the new ones?

@HumbleMechanic 5 лет назад

Old one unless it’s been repaired.

@DrDodge24 6 лет назад

I took my 2013 GTI CBFA to the VW dealer and asked about the chain tensioner as it had never been done before. (It's a 9/2012 build date) they said that chain tensioners failing are rare and do not recommend I do it. They said I need to have an oil screen replaced every 50,000 miles and I'll be fine. Please let me know if this is correct. Thank you.

@LOU1NY 6 лет назад

ZNormT6 Hi. I also have 2013 GTI Autobahn ( Registration) 09/18/2012 ( build date). I’m curious if you had the dealer mechanic do a visual check if the revise version was installed?

@mapetas_0213 2 года назад

So do I haaaaave to replace the cover and the little plug if I take off the plug to check?

@Vento_R6 7 лет назад

Hey Charles any DIY on how to replace the tensioner?

@HumbleMechanic 7 лет назад

I haven't done one. I am nervous to do that video. It is not a hard job, but if you do any of it wrong , you are doing big time engine damage. Maybe at some point I will.

@Vento_R6 7 лет назад

Thanks any idea if the Bentley manual has this in it?

@nicholasdavis8097 8 лет назад

Do you have a video on how to change the tensioner?

@HumbleMechanic 8 лет назад

+Nicholas Davis I don't. I am not sure that I am going to do that video. I am VERY concerned about people not doing that job right and damaging their engine. If I do that video, it will probably be a private video that I distribute by request, or a pay video. I don't really want someone that is not qualified to try and replace that part.

@danielrodriguez628 8 лет назад

how do you put the intake gear in timing not the chain

@user-oh8gh9lb6n 6 лет назад

Hi there I have a 2009 Audi A4 2 litre turbo TSI is giving me the code number p0016 and I change the timing Chan and I change a tensioner I change the guides giving me Sam code undertale runs ruff I when pull out the intake camshaft actuator sensor that time it will run smooth why does. That please can you let me know what I have to do

@elektrikman34 2 года назад

What does old 1 look like vs new model?

@mayrimhernandez3700 8 лет назад

Hi, i have a 2011 vw cc r line what timing kit this car uses. is it the (timing belt kit) or is it the (timing chain kit) I'm so confuse. Thank you

@HumbleMechanic 8 лет назад

+Mayrim Hernandez all the CCs were chain driven

@RemetinecBoys 8 лет назад

In which video can we see the differnce between the "old" tensione" and the "new" one the updated one that we should be lookin for. Thanks

@dalehollins5744 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BL_pLK7oGkg.html

@danielvillegas6095 7 лет назад

I followed him counting and I changed tensor but he excels a lot and I think that is the reason not much much and when I turn engine crankshaft the chain jumps I have that problem

@vasudevanvenkataraman5587 3 года назад

Would this be applicable on a 2009 Skoda superb 18 tsi

@andrewlaw 2 года назад

Did you ever find this out? I have a 2010 1.8 Tsi

@natehess4382 7 лет назад

What am I looking for here? I may have missed it because I skipped around but how can I tell wether it's an old or new style tensioner?

@512kjt 6 лет назад

Old style tensioner has a wide "bluish" metal band around the component that fails. Newer revision has a wire spring clip around the plunger like this... www.aliexpress.com/store/product/OEM-Volkswagen-Timing-Chains-Tensioner-For-VW-Beetle-Tiguan-Jetta-Passat-B6-GTI-Passat-CC-Eos/1202321_32465781878.html

@512kjt 6 лет назад

Here's a pic that shows the original version and the revision... flic.kr/p/CJgfb3

@512kjt 6 лет назад

You bet!

@ProfessorDIY 6 лет назад

do not skip around then! Thia is an awesome video, but you should watch it not expect others to explain it to you

@shaun_wp7281 5 лет назад

Howzit mate, I live in South-Africa and i own a 2013 Hyundai i20 Crdi. Its a 1.4Diesel. Must say pretty good cars. Im at 156000km didnt have any shit with this car at all cant sy that with my previous VW's 😂, anyway i dont know if you get them there but here our temperatures range from 0'C in winter to 38'C in the summer it's summer now... Anyway i did my service myself, that includes all filters including diesel filter. My owners manual states i should use 5w30 or 10w40. But recommends 5w30. Here 5w30 is verby expensive so i bought 5w40 Shell Helix HX8. Would it cause damage using a 5w40 instead of 5w30? As in the thicker oils it appears to be usable in the viscosity chart. Thanks man Shaun.

@drawingdreams1072 2 года назад

Hyundai ugly cars 😂 lol

@jonyhopkins1 2 года назад

How we estimate the longueth of the tensionner . At wich level we must change it

@jasonmoore3557 7 лет назад

Is this similar to the 1.4 mk 6 2010 tsi 122 bhp engine? Thanks

@PaulBeetge 5 лет назад

So i drive a 2011 VW Scirocco. Will my car have the old timing tensioner on it?

@ivayloipetkov 4 года назад

Yes. Any car from VAG before july 2014

@dmti3sto 7 лет назад

Loose timing chains , high oil consumption , carbon deposits , all you need in a engine.

@richardgagne8701 3 года назад

Not sure that the main guy here will see this question but I figure I would ask. I did the timing on my 2012 CC and now getting a code the tensioner was missing that little clip in there was wondering if anyone has run into that before? Would that cause a error code?

@sfindur 3 года назад

I have a 2013 CC Sport 2.0T. Do I have the old tensioner or the new one?

@HumbleMechanic 3 года назад

Probably new style but I’d still put my eyes on it to be sure

@paulwilson1878 6 лет назад

HI, I installed a new vw tensioner on my 09 eos 2.0 after the install when rotating the engine by the crankshaft bolt I noticed that the new tensioner is moving in and out when the engine rotates and making a snapping sound when I rotate is that normal? Thank You!

@HumbleMechanic 6 лет назад

Movement is normal and some noise is too. The movement should only be in the tension. Meaning the tensioner will move “up and down” the same way you tension the belt.

@paulwilson1878 6 лет назад

Thank You!

@quangan3785 7 лет назад

the dealer just had my intake manifold replaced and they found both of my rear main seal and upper timing chain cover are leaking. I know the main seal is impossible for me, but is there a video about the upper time chain cover available? Or, is it another mission impossible?

@HumbleMechanic 7 лет назад

+Quan Gan the upper cover is easy. A hand full of bolts. Maybe I'll do a video on my wife's car

@quangan3785 7 лет назад

HumbleMechanic Hi Charles, thank you in advance!

@Dan_Mk2 4 года назад

Do i need to replace the chain too if i have an older model tensioner ?

@HumbleMechanic 4 года назад

At this point in time yes.

@HumbleMechanic 4 года назад

It’s been updated and I think most of the guides too

@alexmike1292 8 лет назад

does the 2012 US golf R how the old or revised timing chain tensioner??

@HumbleMechanic 8 лет назад

+kyle strong no. That engine is belt driven. It's a modified version of the BPY engine

@alexmike1292 8 лет назад

+HumbleMechanic so I'm good?!?!

@HumbleMechanic 8 лет назад

+kyle strong you will just have to replace the timing belt and related parts when it's due. I forget the interval that one is due.

@alexmike1292 8 лет назад

+HumbleMechanic thanks for the quick reply!!! I love your channel but I don't see anything that regards my 2012 golf R. Is there anything that I should be considered with as far as failures? or prevented maintenance? car is stock and is coming up on 50,000 miles.

@therealpeterburke 6 лет назад

Instead of the mirror, my old eyes prefer a USB inspection camera. It has light on the tip, bendable wire to go where you want it, and it hooks up to a phone. under $20 on amazon and the best thing since sliced bread for jobs like this

@HumbleMechanic 6 лет назад

That is a great way to do it. I have had pretty poor luck when the cheap ones like that. But when they work, they are great.

@crewmax4240 3 года назад

If you can reach it, using a 5in1 tool might be easier and safer. I've never done it, but, just guessin'.

@ryslanyedinak2615 7 лет назад

Does the lower tensioner have the same problem as the upper tensioner in 2.0 tsi?

@HumbleMechanic 7 лет назад

No. The balance shaft tensioner is great, and the oil pump tensioner is just a spring.

@justinlynnbailey9480 3 года назад

My Mk6 is driving me insane, I changed the chain and got all the timing set as close as I possibly could within the measurements. And it gave me codes p0011 p0016 and p052a without even trying the first start. It cranks and stumbles but no start, and when I took the cap off the cams where still in a good spot, but the chain marks did not line up where they should.

@GPTSkills 3 года назад

Did you figure it out?

@Den9696 8 лет назад

any idea what the cost is to get this tensioner replaced in a 2010 GTI?

@HumbleMechanic 8 лет назад

Usually in the $1000-$1200 range

@armando19 8 лет назад

,Hello! do you also recommend replacing the timing chain? or just the tensioner. my car has around 108,000 miles.

@ivayloipetkov 4 года назад

Do the chain and the gears as well. The cost will increase a little but you will not have to change the chain down the road. This is if you plan to holdon to the car

@drawingdreams1072 2 года назад

the tensioner breaks down because the chain is stretched so dont be a dummy an replace the all kit pendej@

@JustGazGaming 7 лет назад

wish i knew this about 2 years ago before my timing chain failed and wrecked the head on my 2.0 tsi

@512kjt 6 лет назад

You and me, buddy. I ended up doing it myself and the parts and pieces alone were $1,500. I uploaded a few vids about it. So mad at VW...

@1petrofski 6 лет назад

Happened 3 days ago on my Golf 6 1.4 TSI 2010, 60k miles Morning start at home , cut out. Rings , guides done for. Not looking forward to the damage / price tag coming

@dumbeezy5480 6 лет назад

My uncles GTi had the same problem, but VW warrantied it and he got a whole new engine.

@rmetanes 5 лет назад

@@512kjt how many kms did u have on your car. ?

@rmetanes 5 лет назад

how many kms did u have on your car. ?

@vincentlavezzi4646 4 года назад

I have a 4/12 production date 2012 gti. Would that be affected?

@HumbleMechanic 4 года назад

Odd are no, but I’d still check it

@vincentlavezzi4646 4 года назад

HumbleMechanic thanks !!

@GPTSkills 3 года назад

I checked the tensioner on the gti I will be buying but I could not get it back on fully. I removed the fender liner and boost pipe to get more room but I still couldn't even if I put all my weight to it and lubricate it with fresh oil. Has anyone else struggled with reinstalling? What's the trick of getting it back on?