How to choose a medium voltage VFD (Buying Guide)

Подписаться 27 тыс.

Просмотров 16 тыс.

50% 1

VFDs.com 800-800-2261
In this video, our VP of engineer Craig Hartman will guide you through choosing a medium voltage VFD, and go into details what is truly important that you might have otherwise be unaware.
When you have to spend 6 figures to purchase a piece of machinery, you should not take any detail lightly. You want to consider every detail to ensure you get the best bang out of your buck. Craig breaks down the buying guide into 10 key points that you should think about.
This is a longer video but purchasing decisions like this should not be made quickly. Start with this video and write down questions or anything you might have missed. If you have any questions, feel free to leave a comment below or call us directly at 800-800-2261. Our engineers can assist you in finding a medium voltage VFD as well as a matching motor.
Call us at 800-800-2261 and speak to a sales engineer or a medium voltage VFD specialist.
Shop for a medium voltage VFD: www.vfds.com/medium-voltage-vfd
Subscribe for more educational videos: ru-vid.com/show-UCwTQ...
Facebook: / vfdscom
Twttiter: / vfdscom

Наука

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@lyaeusv3828 2 года назад

INCREDIBLE YOU DESERVE A LOT MORE SENPAI

@dineshvyas 3 года назад

From 0 to something in one video. Very informative.

@bobdexter1029 3 года назад

Well done.

@kamalarreaza657 7 лет назад

hi Craig What is the recommended service factor in medium voltage motors for VFD applications

@garbo8962 Год назад

Never heard of 24 pulse drives but in a new building we had 18 pulse drives on all motors 40 HP & !arger except for a soft start in 250 HP fire pump Talked to drive techs from two different drive companies and neither liked any drives above plain Jane 6 pulse drives. Always had trouble with biggest boy on the block ABB tech support. Had to perform PM on over 100 ABB drives and contractor threw away all the books. Took me two weeks and maybe 5 emails for clowns at ABB to finally explain how to Bring up DC Buss voltage that we had to enter on our drive PM'S. Found Danfoss & Allen Bradley best for tech support.

@garbo8962 Год назад

Maybe 6 months before I retired they installed two 1,750 HP chillers that 18' long cabinet was feed by 13,200 volts then to a transformer supplying 4,160 volts to the VFD. Never had training ing or saw them run. I asked where the NEC required arc flash labels were and they said thier engineering department were working in that.When I talked to one of my old coworkers a year later they still were working on labels. I would never approve of final payment for any lazy foot dragging company that did not supply required !abeling.