How to Clean Dried HP 61 Ink Cartridge - Printhead Blocked & Clogged

Подписаться 83 тыс.

Просмотров 133 тыс.

50% 1

I will show how easy it is to fix and clean the HP 61 ink cartridge of your printer if it has dried out / clogged or is being blocked. Amazon link for replacement ink: amzn.to/32Kop6R
Don't forget to like and subscribe if this was useful to you!
The Amazon links above are affiliate, which means that I may get a small commission from them if you decide to buy something on their website. This is to support this channel :)

Наука

Опубликовано:

28 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@KenDebono Год назад

First I tried to swab the dry ink from the cartridge with Q-tip and rubbing alcohol, but that didn't solve my problem. Printer was still missing ink on lines of the document from top of the page to the bottom. After watching your video I boiled a bit of water, poured a little under 1cm of it into a coffee cup and left the cartridge in there for 4 minutes. Wiped it dry as you describe and put it back into the printer. On the first document the print was perfect! Thank-you.

@craighendrickson7938 Год назад

Mine were perfect for about two pages. Then each page was faded more and more

@lizskyline17 3 месяца назад

Need to soak a bit longer ?

@gailconder7027 Год назад

I was ready to buy new ink until i watched your video and followed your instructions. It worked and it saved me lots of money. Thank you so much!

@Spork2 10 месяцев назад

Thanks so much! My ink cartridge was full and I had no idea what to do as I didn’t want to buy another expensive cartridge. This worked out great 👍

@barbarawilder2956 Год назад

Thank you so much. Your video came up just as I was going to buy a new cartridge. Worked PERFECTLY. I have subscribed and look forward to future videos.

@Gin0oo Год назад

Wow tried many other tutorials but it was still not printing correctly, I followed your steps brother and wow it printed like it was a new cartridge, thank you soo much

@michaelbaumann42 9 месяцев назад

You just saved me like 80.00 with this information.. highly appreciated and thank you so much

@Trilogy1-1-1 2 года назад

I'm going to try your method tomorrow and hopefully it will work for me. Thank you for sharing this tutorial video. Your explanation method is wonderful. So easy to follow and understand. Much appreciated. Wish me luck please.

@just_beautiful Год назад

I didn't have to buy a new cartridge because of your video. Thank you!

@RhianeHacker 2 года назад

Thank you for this video!! I was contemplating buying some new cartridges but you've saved me needing to now!

@betelhemajijo976 Год назад

I appreciate you. Cause of ur method my printer starts working! Thank you.

@rainrose2801 22 дня назад

this method totally worked - perfect print on the first try after soaking for 5 min! thank you!!

@jslash208 Год назад

Thank you so much. this video helped me get my cartridges working from being all dried out. 👍🙂

@TheDragonDelasangre Год назад

Thank you, this fixed my nearly full cartridge to perfect working order.

@TricksTipsFix Год назад

You're welcome!

@dsuthapong Год назад

Omg!! It worked!!! You save my printer… 🥳🥳🥳 Thank you 😃😃😃

@zainkemkem8949 Год назад

Wow! It’s worked. You’ve saved me lots of money. Thanks much.❤

@juliegibbs4812 3 месяца назад

Brilliant. worked first time, saved my day!!

@KM-ey5vs Год назад

thanks a lot. I tried it now for 652 tricolor cartridge and now it can print color. Before it was only printing black from the black cartridge

@Goatmasterfunk 9 месяцев назад

Made an improvement for me. I rarely use my printer but my black cartridge seems to create problems. I only soaked it for a couple of minutes but I think longer may even give better results.

@djprojugs6606 7 месяцев назад

If it's a dried ink issue, the chance of fixing varies by how long it's been sitting unused as well as how much ink left inside the cartridge. From my experience If it's been a year or more and still pretty much full it's worth trying but you will want to soak it and dab it dry and repeat that multiple times. I've had to do over 5 or 6 times before getting decent results and a final soaking one time I even boiled the water. Basically the ink dries from the bottom and works it's way up the longer it sits unused. So basically what your doing with each soak is getting a layer of ink wet again removing it when dabbing and then you repeat the process to soak that next dry layer of ink. So my opinion if you still can't fix it after 10 tries max is probably too far gone and better off just replacing that cartridge.

@jaysingh05 3 месяца назад

This is a great "how to" video. Thanks - appreciate it!

@eileenseitz Год назад

I rubbed the metal area with isoproly rubbing alcohol and it worked great.

@JSdeen87 Год назад

Worked like a charm thanks!

@princess15292 Месяц назад

I actually tried it and it worked perfectly well.

@zmaninpgh 6 месяцев назад

Thanks for saving us all money!!!

@djprojugs6606 7 месяцев назад

@lizskyline17 3 месяца назад

My ink cartridge haven't been used since 2023 or only used once or twice since 2021! This method worked. After soaking for 10 mins in warm water. Nicely prints 🖨 👌 I would like to give you a big thanks for your video and it has really helpful to me. God bless you abundancely ! ❤😊🙏

@iamsuemitraa Месяц назад

this actually helped, thank you so much. I was quite close to throwing out the printer as it had been problematic. My bad for not printing regularly too xD

@luiginomongera7676 Месяц назад

Wow! Complimenti, spiegazione chiara ed esaustiva. Risultato ottenuto. Grazie!

@aaronsmith8346 16 дней назад

Thank you, this worked exactly as you said it would!

@lindamills2279 2 года назад

Very good teacher!

@nevillelee3824 Год назад

HP troubleshooter couldnot solve blank sheets. Found this video. Followed the instruction and the method worked. Left cartridge in warm water for less than 5 minutes. Reinserted an hey presto printing page !!

@artfquinn Год назад

The method works. Depending how often you use your printer, it may take very long time to soak in the water. I have some cartridge only needs sit on the water for 3 minutes. And one time I haven't used the printer for 4 months, it took 3 hours in the water to have the cartridge works again. So it could be 3 minutes or 3 hours.

@MadanDutt-vl1xv 3 месяца назад

Thanks for the tip. Worked very well.

@BuddhiniKanchanaEkanayake 16 дней назад

Thank you very much. This worked perfectly for me. It really helped. 🙏

@pamelafredrick2127 6 месяцев назад

OMG. This worked!!!! Thank you...

@MohammadShahriar-ko6en Месяц назад

Thanks a lot for this video its really resolved my issue.

@MissMyRyan 2 года назад

Brilliant sir! Thanks so much 🙏🏽

@niroshniapmuruganmoe8285 Год назад

Thank you so much it really helps

@bepd Месяц назад

This worked for me, thanks!

@Carlosrenteria-gb8zl Месяц назад

thank you! it really worked

@Jessica-vv3ty Месяц назад

It worked, thank you 🙏

@TEC-9.0 Месяц назад

This worked...like a lot thanks man

@AJ-dr5jr 11 месяцев назад

This worked! I just cleaned it with a qtip. Thank you

@junkyinny 3 месяца назад

hot water and q tips worked great

@ahardybrit 2 года назад

Thank you - it worked!

@4funrc11 Год назад

😃👍 Thanks! Does this also work with hp deskjet 2600 cartridges?

@clivecoutinho6436 Год назад

Thank you so much! Worked good as new

@TricksTipsFix Год назад

I like to hear that!

@W.F.Scott3 11 месяцев назад

i used paper towel with super hot water and rubbed it on the silver ribbon and the ink started flowing. Thank you!

@chanelysis 2 месяца назад

It worked, Thanks

@Vaneesro 8 месяцев назад

Thank you Sr! …It worked ❤

@hhhhhhhhhhhhh5038 Год назад

does the printer get affected if I don’t use it for long time or just the cartridges ?

@JohnDanko-go1wg Год назад

worked.... thanks

@HarikrishnanK92 6 месяцев назад

Thank you 🤍

@kavindaperera1209 2 года назад

Thank you😍

@thepcmaniaccc Год назад

dissamble it, remove the sponge inside, rinse inside with warm water until clear water comes out from the printheqd of the cartride, works everytime, I mean if the issue is dry printhead not lack of ink or issue with the electronics

@random_tek Год назад

I don't think you should disassemble it. It's too risky and can cause the cartridge to break

@johnemmons9087 5 месяцев назад

As a mechanic and knowing how things work, this is a great idea. What’s risky?! Breaking something already broken?! And you can always buy a recycled one for a fraction of the price!

@YRTEverything Год назад

Helpful.

@faizan_sheikhs 2 года назад

very nice

@GabrielManzanero Год назад

Yo! This shit worked like a charm!!

@ehsanhaque8302 2 месяца назад

Thanks.

@roberthill3863 8 месяцев назад

I usually just damp a kitchen towel with hot water give the bottom of cartridge and hold the towel on it give it a quick clean on th bottom the give the cartridge a vigorous shake that dose the trick chic the cartridge on your wet towel and it comes out with the three colours same with the black

@tavogp Год назад

thank you so much i didn't know this was possible you saved me a lot of money!!

@SkizzyBryan Год назад

hello. when i need thois i on;y saw blue and yellow. the red one doent want to come out

@DonSlimy 3 месяца назад

is this for missing lines and color fades?

@kirito-iv3ur 3 месяца назад

Thanks man but how can I fix ink is low in printer after refilling it

@freedom174 7 месяцев назад

Good , It depends of course if the cartidge is not out of ink !!

@DevenirRicheMaintenant 8 месяцев назад

I tried but if I haven't used my cartridge for a long time (like 3 years) it's over right ? I tried without success

@mhxxd4 Год назад

Does this dilute the ink?

@thanassisstamatoglou480 Год назад

What about printhead??do we have to clean them same way??with warm water??? I cannot find that at settings ??somebody told we have to do that as well..any idea??

@random_tek Год назад

They literally said in the video

@artfquinn Год назад

This method only applied to the brands (like HP) that have the printer head build in on the cartridge side. For brands (like EPSON) that have printer head built in on the printer side, it doesn't work.

@Toni_LOTR 2 года назад

my colours magenta and blur work fine its just my yellow lol, I can't get it unclogged !!!

@princesslilipool3145 Год назад

Thanks😘😘😘😘😘😘

@anyan9738 Год назад

i tried this, but my magenta color is still missing even in the nozzle plate. How to solve this? :( PS. I tried the blowing method and magenta color shows but still not printing and when I check magenta color, it is again missing

@ShishuChildCare Год назад

change colour brand.... i had issue with yellow colour...

@deec5420 Год назад

I've used this method before on other printer cartridges and it worked. Unfortunately with my HP Deskjet that uses #65 cartridges, the black won't print and the color one prints very faint gray. I bought the printer new a few years ago and after printing a few test pages, never used it again until getting it out yesterday. Ink comes out after soaking and dabbing on paper but still won't print.

@phillyirishlass6513 5 месяцев назад

Darn, that sucks. They're to expensive to give up. I sure hope that you have found a solution & it's working for you. GOD Bless🕊️

@johnchang3807 10 месяцев назад

Did not work, no matter what i did to it following these methods. Basically this inkjet cartridges are scamm from.printer companies. I even installed brand new ones and still not working . Moved on to laser long time ago and throw away any inkjets

@ValeZ-sk9cr 22 дня назад

my pins on cartridge some are black

@pennierkaide4985 Год назад

I tried it and repeated it, but I keep getting an error that the cartridges are defective. I know it had to work bc everything worked like in the video. It's a brand new printer and I only used it twice. I think HP gives you just enough ink, and then you have to buy more.

@mosabawad9506 2 года назад

How i know it.s ready

@thatboyindahouse Год назад

you just have to try it - make sure you dry it off well - then put it back in the printer and test it

@artfquinn Год назад

When you tap the cartridge on the slightly wet paper towel and it shows three color.

@joyceparlero8347 2 года назад

Ano po yan mainit na tubig?

@thatboyindahouse Год назад

ito ay mainit na tubig - mula sa lababo

@illdisappeardontworry 6 месяцев назад

Did this and my print head is now defective (1 hr)

@brianleblancart736 2 месяца назад

Interesting how little information you get from official HP sources. It is already a ripoff. They should at least try to help out their customers. Thanks TTF!