how to clean or rebuild a carburetor on a craftsman 2800 pressure washer with a Briggs 7.25 

Thanks for this. It's great that the made the parts were you can't install them backwards. They only fit one way.

Great teaching video. I have never cleaned a small engine carb but after watching this video, I cleaned the carb on my craftsman pressure washer. Unit starts and runs like new!!!

Thank you so much for this, was able to get my pressure washer running again after watching this!

Thank you for posting! Mine wouldn’t fire up and I did exactly as you did. Running like new again!!

2020 CRAFTSMAN 2800-PSI 2.3-GPM Cold Water Gas Pressure Washer with Briggs & Stratton. New purchase $289, worked perfect. 2021 Summer. Won't start. Paid local repair man $40. Was told to use non-ethanol gas to prevent carb issues in Northwest. Worked perfect. 2022 Summer. Won't start. Pissed off and tried to sell on Clist for $100 and no takers. 2023 Summer. Cleaned carb jet w/cleaner ($7) and 14K gold acid ($16 amazon). Works perfect. Thank you so much for giving me the confidence to solve this issue. Can't wait for next carb clog.

I read the manual first, and it sucked. Thanks for posting this because you helped me realize I needed to get the main jet assembly out. Without your help I would have left that whole thing in there because it looked like it didn’t come out - and that made the difference.

Thanks your the only real repair man out there. Everyone else is guessing their next move.

Appreciate this video. I have this pressure washer and need to clean the carb out.

Thanks for the video got mine running after watching!

Great video and instruction. I was able to clean the same carb.

Great video, man! Thank you for putting this out.

Thanks for the tutorial. Now let's see if I can do it. You make it look easy.

Great work thank you I would suggest that you shut the compressor off next time

Thanks for showing step by step!

My exact model and exact issue. Thanks!

Thank you very much. This fixed my issue immediately.

Thank you!

Nice job keep them coming

Amazing video! I believe you called it the needle valve that is in the center of the float, mine looks like it’s missing a gasket/rubber seal. Should I be able to replace it with a kit or do I have to buy a new carburetor?

Thanks man it worked really appreciate it. I subscribed

Great video!

Good video sergio argentina

Thanks dude! Worked like a charm, had used the wrong gas in it I think. 😢

Link to the acid used? Current link is dead. Thanks

I picked up 2 of these this past weekend at Lowes for $25 each, being sold as customer returns for parts only. They have the briggs cr950 engines which seem easier to work on. Both weren't getting fuel so I removed and cleaned the carbs and they are working perfectly now. I also noticed the original Torch spark plugs were gapped at 0.010 so replaced those with ngk gapped at 0.030. Seems craftsman should include better instructions on either draining the gas or running the machines dry and also using a fuel stabilizer, they wouldn't have so many negative reviews for machines not starting.

Thank you bro!!!

I cleaned the same your video. But started then turned off and now not work may you show me fix it thanks .my Crastman pressure washer 2200

Wanted to hear it run. Lol

So who all else is here because they grabbed the wrong gas can?