Тёмный

How to convert a Bandit to a Rustler 

Over Budget RC
Подписаться 3,7 тыс.
Просмотров 14 тыс.
50% 1

In this video I will show you how to convert your Traxxas Bandit into a Rustler
Part Numbers for Conversion
3771 Front Tires/ Wheels
3654 Front Wheel Hex
3632 Caster Block
3736 Steering Block
1675 Bushings
3641A Camber Links
3631 Front Arms
3739 Screw Pin Set
3139 Turnbuckles (Bandit rod ends are the same)
1914 Body Mount
3757X Rear Shock Spring
3655X Rear Arms
3770 Rear Tires/ Wheels
1951 long half shafts
2753X stub axles
4628 Differential Output
4690 90 Tooth Spur Gear
2416 16 Tooth Pinion
3752 stub axle carrier
I have some tool recommendations below that I use in a lot of my videos.
Power tool tips I use
Team associated amzn.to/3m1XlWf
Hudy amzn.to/2O20FUF
Hudy 7mm nut driver bit amzn.to/3sD3qLq
Milwaukee M12 Fuel Screwdriver amzn.to/3tXdQFC
Milwaukee M12 Fuel Screwdriver (tool only) amzn.to/3fmDUpV
Traxxas Driver set amzn.to/2SVe0Rf
Wire Strippers (Similar to mine) amzn.to/3aW7Iqk
Soldering Jig amzn.to/3aYKQGJ
Soldering gun amzn.to/3xICUD
Shock tool amzn.to/2RN9vrr
Camera GoPro Hero 8 amzn.to/3cxnuci
WAYS TO SUPPORT THE CHANNEL:
Support Monthly on Patreon / overbudgetrc
Shop on Amazon? Use this link: amzn.to/3GIlZV9
Shop on AMain Hobbies use this link alnk.to/87U16HX
Leave a Tip through Paypal: paypal.me/OverbudgetRC
SUBSCRIBE: It's FREE! and helps me out bit.ly/3ozPan0
This channel is supported by affiliate links. I receive a small commission of what you purchase, and it doesn't cost you any extra money
CONTACT INFO:
Email Address: Overbudgetrc@hotmail.com
Mailing Address (Private Mailing Box):
Over Budget RC
14420 Elsworth St
Suite 102, PMB # 109
Moreno Valley, CA 92553
United States
Contact me if you do want to send anything Thank you.
(I don't check it very often unless you tell me to)

Опубликовано:

 

17 май 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@glaxiccp7841
@glaxiccp7841 4 года назад
This tutorial is what a lot of people were looking for. Really great tutorial
@OverBudgetRC
@OverBudgetRC 4 года назад
Thank you
@sonnysingh902
@sonnysingh902 3 месяца назад
Thanks! This was so helpful! I was thinking of selling my Bandit and buying a Rustler. I already did the widening kit using Rustler arms and axles. After watching your video and analyzing the exploded view on Traxxas’ site, seems all I need is the front body mount plus body. You saved me a lot of $$$!
@OverBudgetRC
@OverBudgetRC 3 месяца назад
Thats great I'm glad this was able to help you out.
@karlfortuin5794
@karlfortuin5794 Месяц назад
I recently did the same thing i call it my randit & it looks very realistic!!
@OverBudgetRC
@OverBudgetRC Месяц назад
Haha nice
@Chuck-cx9gw
@Chuck-cx9gw 3 года назад
Sweet
@extec101
@extec101 Год назад
and here i am in the thought of converting my slash in to a bandit chassie and body but still use slash arms and occasionally slash wheels when its not used on astro then im going for shumacher mezzo and cutstager tyres. and for snow some paddle tyres at the back.
@OverBudgetRC
@OverBudgetRC Год назад
That could work 👍
@tusipuede4443
@tusipuede4443 4 года назад
Niceeeeeeee
@stonecold6243
@stonecold6243 11 месяцев назад
might as well buy a rustler!
@OverBudgetRC
@OverBudgetRC 11 месяцев назад
Yes, I agree, but I used to sell parts on eBay, and you'd be surprised how many people would rather do this they would ask me what they needed and buy it from me.
@philiplibby6360
@philiplibby6360 3 года назад
Varry good vid
@OverBudgetRC
@OverBudgetRC 3 года назад
Thank you
@Oddy666
@Oddy666 3 года назад
Hey, you should add 3752 to your part list. It's a necessary part.
@OverBudgetRC
@OverBudgetRC 3 года назад
I just added it. Sorry i missed that one, thank you.
@Oddy666
@Oddy666 3 года назад
@@OverBudgetRC Yea no problem! Thanks for the guide, doing this upgrade to my bandit right now! lol
@Kyhmykeppi
@Kyhmykeppi 3 года назад
Is it possible to just change rustler spindels to bandit arms? I would like to beef up a bandit and use rustler type wheels?
@Kyhmykeppi
@Kyhmykeppi 3 года назад
Never mind, i just checked your other way conversion video and they fit! Great vids man! Thanks
@cagelexi8954
@cagelexi8954 2 года назад
Are you able to convert a 2wd rustler to 4wd?? That would be the most epic video ever!! Ik there is a Rustler 4x4 Chassis, should be possible? Let me know! Would love to see
@OverBudgetRC
@OverBudgetRC 2 года назад
No basically the only thing they have in common is the electronics and the shocks all the other parts are different so it wouldn't really work out. Traxxas used to sell a stampede 4x4 roller kit and ive seen it advertised as a 4x4 conversion kit. Along time ago before there was a stampede 4x4 I tried to make one from 2 stampedes using the transmissions on the front and rear but I couldn't get it figured out for the front steering with the axles. So it never got finished and is long gone now.
@cagelexi8954
@cagelexi8954 2 года назад
@@OverBudgetRC Dang! Thanks for all the info. 👍
@averagerallyenjoyer9927
@averagerallyenjoyer9927 3 года назад
Could you do rustler to slash plz
@LyroLife
@LyroLife 2 года назад
I did that. Its super simple. Just get the 2wd LCG Chassis and you are good.
@dailyriddenhorses7665
@dailyriddenhorses7665 4 года назад
What did u make it a bandit
@OverBudgetRC
@OverBudgetRC 4 года назад
In this video I made a bandit into a rustler I have another video making a rustler into a bandit i was just doing it to show how its done to help people out thanks
@robroberteccleserteccle1660
A8l
@Theguyinthe
@Theguyinthe 3 года назад
Why do that?
@kevosrcadventures9019
@kevosrcadventures9019 3 года назад
How $$ did it cost
@OverBudgetRC
@OverBudgetRC 3 года назад
I haven't added how much it would be i just did it as a tutorial
@gerryo619
@gerryo619 2 года назад
I would also like to know approx cost
@lmaoncyaddas8131
@lmaoncyaddas8131 3 года назад
Ngl I want to see a bandit convert into a rustler then into a slash
@OverBudgetRC
@OverBudgetRC 3 года назад
I thought about doing a video on how to convert into a slash but there are too many parts that are different. Probably cheaper to just buy a slash.
@brentmccaig3192
@brentmccaig3192 2 года назад
@@OverBudgetRC What about 3D printing the plastic parts? ;)
@OverBudgetRC
@OverBudgetRC 2 года назад
@@brentmccaig3192 I did ended making a video how to convert a rustler into a slash. I don't know how well 3d printed parts would hold up for suspension parts. But I'm sure its possible. I would love to get a 3d printer someday but i think designing the parts would be hard to do at least for me.
@Hotdoggeroni
@Hotdoggeroni Год назад
So I did the math, and the parts come out to roughly 75 dollars, depending on where you are
@OverBudgetRC
@OverBudgetRC Год назад
Wow that's quite a bit my buddy did it but kept the bandit body and changed everything else out to save some money whats funny is I told him to buy a Rustler originally but he didn't listen lol
@Hotdoggeroni
@Hotdoggeroni Год назад
@@OverBudgetRC haha that's pretty funny. The wheels price wasn't even included, so with wheels it would be more like 180 ish. So yea buying a new one would be better than building from scratch. Keep the motor, body, and other key parts and you'll save some money. Also, a new rustler is pretty pricy.
Далее
Calling Traxxas out because nobody else does!
18:34
Просмотров 191 тыс.
Bandit got Unstock and then it beca……
13:54
Просмотров 12 тыс.
How to convert a Rustler to a Bandit
10:59
Просмотров 4,5 тыс.
Traxxas Bandit gets a DRAG CAR Conversion
6:48
Просмотров 30 тыс.
HOW TO BREAK IN TIRES || Tire prep methods explained
16:18
How to convert a Stampede to a Rustler
7:43
Просмотров 8 тыс.
Traxxas Bandit Can it Win? Part 2
9:18
Просмотров 28 тыс.
How to Convert a Rustler 2wd to Slash 2wd
9:55
Просмотров 8 тыс.
I COMPLETELY TRANSFORMED MY TRAXXAS BANDIT RC CAR
9:42