How to Edit/Export MAGIC LANTERN Raw Video | Simple Workflow Tutorial [2020]

Подписаться 31 тыс.

Просмотров 55 тыс.

50% 1

How to Edit/Export MAGIC LANTERN Raw Video | Simple Workflow Tutorial [2020]
Here it is, pretty much the stuff I do when editing my ML RAW footage after each shoot - it's simple and quick, unless I want heavy grading. I usually just paste a receipt over all the clips in MLV App and then make slight adjustments to ensure each clip looks the way I want them to look. My personal export choice: Uncompressed DNG or Prores 4444/422.
One of my favorite MLV App Receipts for any ML Capable Camera "Free" here: drive.google.c...
------------------------------
Magic Lantern RAW Files [.MLV] to play around with:
drive.google.c...
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Canon EOS M Settings RAW Video Best Settings [2020]:
• Canon EOS M Best EASY ...
Canon 5d Mark II RAW Video Settings [2020]
• Canon 5D Mark II RAW V...
Easy Magic Lantern RAW Workflow:
• How to Edit/Export MAG...
CanonEOS M Rig Setup:
• Building a Minimal Can...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
My EOS Z LUTs for Magic Lantern RAW:
EOS Z - 16 Cinematic Rec709 LUTs + MLV App Receipts for ML RAW Video Camera Files
Link: shoptly.com/i/nxe
Latest EOS M Build from Danne's Reprository:
bitbucket.org/...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Follow me on Instagram:
www.instagram....
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
My Gear:
Sony A7RII [RU-vid Cam A]
Canon EOS M50 [RU-vid Cam B]
Canon EOS M/M2 [Main Camera]
Canon 5D Mark II
BMPCC 4K
Microphones: RODE NT3/NTG1, RODE Videomicro/Videomic, Sony ECM-CS3 Lav, Boya BY WM4, Sennheiser MKE 400
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
EOS ML Tutorial for other Modes: 5K Anamorphic, MCM Rewire, 2.5K, 46fps:
• Canon EOS M RAW | NEW ...
EOS M 2.5K Raw Tutorial:
• Video
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Music Attribution:
www.purple-pla...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*Don't forget to like, and subscribe to the channel!*
//Check These Out!//:
New Short Film "ARRI Sundown" [EOS M 14-Bit RAW]:
• Canon EOS M RAW | ARRI...
"Winter is Coming":
• Video
"Canon FD ARRI Classic Look" | EOS M ML RAW:
• Canon EOS M RAW | Cano...
Metabones Speedbooster for EOS M:
• Metabones EF to EOS M ...
"ARRI Wonder":
• Canon EOS M Film | ARR...
How I Grade/Convert/Export RAW Video:
• MLV App | Converting R...
Best Video Exposure Magic Lantern Settings:
• Video
4.5K Mode Short Film on the CANON EOS M:
• Canon EOS M 5K RAW Mod...
**More EOS M RAW Videos**:
"The Nikon Vibe":
• Canon EOS M Raw Film |...
"Mood Beach":
• Canon EOS M RAW | MOOD...
"KOKODA":
• Canon EOS M Raw Film |...
"The Ants":
• Video
"A Mini Carnival":
• Canon EOS M RAW | A Mi...

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 346

@SuperSlackOff 2 года назад

Man, I am a photo channel too, your stuff made me buy the EOS M. It was 221 Dollars. You are the only resource I needed to follow , thank you for finding me a gem to get started on cinematography.

@ZeekEOSZ 2 года назад

That is awesome! Even as a photo camera I reckon the EOS M rocks!

@SuperSlackOff 2 года назад

@@ZeekEOSZ Your channel is a gem for me and this small community in learning this camera and a gateway to starting in cinematography. Please keep the EOS M alive.

@brakmaster 4 года назад

Hey Zeek I'm a new subscriber and after having binge watched almost all of your videos on the Canon Eos M I have to say that I'm properly sold. I have ordered two bodies from Ebay and waiting to set them up so I can shoot 1080p raw. Furthermore I will be slowly selling all my other cameras as they are dead weight. I am now very inspired to go out and shoot! Thank you for everything.

@ZeekEOSZ 4 года назад

No problem at all, glad to hear! These cameras are awesome for the price. Good luck! 😎👍

@deel7114 4 года назад

Finally got Zeek updated the MLV workflow , if possible would it be another tutorial to share the settings and how you switch the video mode/ still photo mode when using the magic lantern?

@ZeekEOSZ 4 года назад

Cheers Dee! I'll definitely consider it, but it's pretty simple to make the switch between the modes. Just turn off ML Raw resolution.

@deel7114 4 года назад

@@ZeekEOSZ HaHa, I got this idea since the review of the 3 7Artisans lens from you last time , where you took photos and videos both at the same period .During the run and gun, the speed to switch and capture those moments actually quite important for us, that makes me more curious about your settings. We will keep supporting your future videos ＆ tutorials 👍

@ZeekEOSZ 4 года назад

Ahh...gotcha! Yeah, quick switching is crucial. Maybe another solution could be having two EOS M's, one for stills and the other for video 😉. Cheers!

@deel7114 4 года назад

@@ZeekEOSZ hahhaha, you made my day😄

@ZeekEOSZ 4 года назад

😎👍

@MegaEpstein 4 года назад

Very useful video! Thanks! I just noticed that i can achieve (even) better colors and overall look using Camera RAW by Adobe, MLV App is awesome but Camera RAW is literally TOP, colors and details are incredible and also as for me CR much easier in use. I drop DNG into the After Effects and than export to mov

@ZeekEOSZ 4 года назад

Great, honestly whatever works for you, do it! Glad to hear it's coming along nicely 😎👍🎥

@MegaEpstein 4 года назад

@@ZeekEOSZ I meant better than i did before :)

@KEcAzZ1 4 года назад

Yes Zeek! Little by little we have all tutorials (in one place) it needs to make beautiful shots! Thank you for effort and time. I believe it would be so much easier to go to new gear for generating the views.. But what you are doing here - it is brilliant. Thumbs up for great content!

@ZeekEOSZ 4 года назад

Thank you Simonas, appreciate it! 😎👍

@rajendrabiswas Год назад

does mlv app work in m1 Mac ?

@ngemu3400 4 года назад

wonderful zeek! the 50mm f/1.2 looks good on that eos m

@ZeekEOSZ 4 года назад

Thank you! Yes it does looks nice - quality glass on a budget camera...nice!! :)

@marcllaurens261 4 года назад

Excellent vidéo ! It’s an impression or the raw of the 5dmkii look lot of more easy to color graduate ?

@ZeekEOSZ 4 года назад

Both are easy to grade. The 5Dii just has more dynamic range so less highlight recovery to worry about 😎👍

@NigelAquascaping 4 года назад

Nice video! I'm a Canon 200d shooter and it looks very interesting to swap to the EOS M to shoot 1080 raw and upscale it to 4k at the end for YT. I also use my gimbal quite a lot so I also need 1080p 50p raw. I do love DPAF on my 200d and the tracking feature is very handy. Is that possible at all with 1080 raw to have good continous AF on a gimbal and tracking features? Then it would be the perfect cam for me at such a price point. I would love to grade further in PP. Is there an easy way with a good preset on MLV APP to turn the files into prores and edit and grade further in Premiere? Or do the files become 8 bit again once it´s in Premiere pro with prores? Or does MLV APP create a perfect starting point in terms of dynamic range and you can easily do the finishing touch in PP without ruining the quality?

@ZeekEOSZ 4 года назад

If you want to grade further in Premiere, you can export in prores e.g. 422, 444, 4444. You can select "profile preset" just under gradation curves in MLV App, then enable Alexa LOG C, SLOG, C-LOG etc... then export prores for more flexibility in post. Otherwise, for a quicker workflow, just export as DNG and import them into premiere pro. For gimbal use, there is only contrast AF. I'd recommend setting the camera to infinity focus the record, or focus on the subject and then maintain that distance. I recorded this whole video with the EOS M RAW, Prores RAW and the MOZA AIRCROSS: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0GyF7tCiY-o.html

@NigelAquascaping 4 года назад

@@ZeekEOSZ When I use my gimbal I record a lot of close ups as well with small dof so push in and pull out will all be rack focus shots then. Also the tracking feature is very nice to track fishes in my aquarium when using my gimbal. Hmm basically ease of use 8 bit with dpaf footage (200d) vs Raw IQ with no continous AF and no flip screen. Both have their pros and cons! Are there any cameras with ML with continous AF and 50p option? I guess mixing the footage from 200d 8 bit on a gimbal with canon eos m raw on tripod and slider will be quite jarring in a sequence? You make amazing videos man well done!

@ZeekEOSZ 4 года назад

It's why I own more than one cam. Different cams for different purposes. The Canon 700D is getting better with Flip screen, not sure about the AF, that would be the 70d's department, but it's less developed with ML. I have the M50, but the EOS M raw looks way better. Soon to sell the M50.

@NigelAquascaping 4 года назад

@@ZeekEOSZ The 70d would be awesome if I could make it work. I have seen the resolution is 1832x1024 on the 70d. Regarding the 1832x1024 resolution. Could I just make a timeline in Premiere pro based on 1832x1024 and when I edited the whole sequence upscale it to UHD before posting to YT? Or maybe buy a 70d for ml gimbal work and eos m for tripod and slider shots. Although then the resolution won't match on the timeline of the eos m and 70d.. Regarding that ML is less developed on 70d would this mean less features or a very unreliable system to work with?

@ZeekEOSZ 4 года назад

@@NigelAquascaping Depends what you export it as in mlv app. If DNG no upscaling is done in MLV App only in premiere upon export. The only thing with the 70D is the aliasing, less modes, and less record time. There should be sample clips on YT, from the 70D with ML RAW too.

@okay1904 4 года назад

Excellent

@ZeekEOSZ 4 года назад

Cheers 😎👍

@realcontent 4 года назад

Darn! I have to go back to square 1 I'm not having the same MENU on my EOS M and my settings changed on ML

@FrankieTheOne 4 года назад

How did u turn the uncompressed footage to MOV???

@ZeekEOSZ 4 года назад

Use MLV App, select MP4 .mov output, click export, done!

@FrankieTheOne 4 года назад

@@ZeekEOSZ Ok I exported ProRes LT with Alexa Log Setting. Since I like to do color gradin in Ressolve better than MLV. But thanks for replying bro. Your channel is one of my favortes at the moment

@bryanbarajasBB 3 года назад

I prefer using NDxHR, or NDxHrHQX, 10 bit, to 4k. I lose audio when I convert to NDxHR 12 bit, 444, I think. Anyways, have you done recent tests on getting the most quality out of this system, no matter how big the file might be? Thoughts?

@educationforall5458 2 года назад

Like it

@josephgreencoat6311 3 года назад

is there no way to just edit with mlv files? is there a way to mass bulk convert from mlv into pro res log?

@ZeekEOSZ 3 года назад

you can edit with mlv flies in mlv app or mlvproducer. You can highlight all and export prores and encode as Alexa LOG or Sony SLOG etc.

@GAMI2002 4 года назад

Hi zeek I have a problem with my magic latern that my bit depth is missing and I installed magic a few times new and formated my Cf card (kingston 256GB 150mb/s)and I still cannot fix it

@ZeekEOSZ 4 года назад

Are you using a 5D Mark II?

@GAMI2002 4 года назад

Yes I do and I saw in your Video description that their is a new ML (2020) for this cam so I downloaded it and Installed it and now it just works fine :)

@ZeekEOSZ 4 года назад

Awesome! Best camera for full frame raw! 😎👊

@thegodfather4713 3 года назад

Hello my friend, my videos that I have processed and recorded in the MLV application get stuck a little when I play them later and play like a slow motion video shot with 60 fps. What is the reason of this?

@ZeekEOSZ 3 года назад

They are big files, playback in MLV App can be difficult, export will be better. Try minimising the MLV App screen to a smaller size then playback. It should be much faster.

@thegodfather4713 3 года назад

@@ZeekEOSZ I will try my friend, thank you.

@thegodfather4713 3 года назад

@@ZeekEOSZ Dude my problem is starting after exporting the video. After exporting my video, I open it for viewing and see the video playing a little slow and with difficulty. I still couldn't fix this problem. Where is the error? What's your comment man?

@TNTTITAN321 4 года назад

hello zeek, love your content man. i need some help... im having issues downloading the app. im on the most current version of catalina on a macbook pro, and when trying to open the app, i get a warning saying mlv app cannot be opened because the developer cannot be verified. what can i do?

@ZeekEOSZ 4 года назад

Ah right. You go into privacy settings on your MacBook and click "open anyway"

@808kilos5 3 года назад

I've purchased your lut but when extract it there a empty files named macos....

@808kilos5 3 года назад

Nothing else

@ZeekEOSZ 3 года назад

Has it worked now? Thanks for letting me know. Send me a message on Facebook and ill sort it out for you :)

@ivanmilosavljevic5931 2 года назад

HELP... My export folder is empty after exporting...

@ZeekEOSZ 2 года назад

Windows user? Don't remove the black window upon MLV App loading or export.

@liburanboongan1457 4 года назад

is it possible to record high fps ? like 60-100-120 ?

@ZeekEOSZ 4 года назад

Definitely not. Max is 50fps with the EOS M.

@MrFabisior 4 года назад

Hey, Great video! Have you tried to make footage most flat possible in MLV APP, to have more room to tweak it in further software - resolve for example ?

@ZeekEOSZ 4 года назад

Yes I have made it flat before. The thing is in mlv app you have 16bit max Color space, once exported as ProRes you lose some information and FCPX for example has only a 10bit colour space. So it's better to do most in mlv app. When you export as DNG in MLV app, it takes nothing done in mlv app. Once exported as DNG you can tweak it as much as you like in resolve.

@HardRocker47 4 года назад

Hello Zeek, I was wondering if you could help with an issue I get each time I shoot Raw with the 5DMark3. It seems like, no matter what ISO I use, I always get horrible noise on the footage, especially in the darker spots and it's as if the noise was Red. I downloaded your clip in the description box and tried fooling around with the exposure etc, it's super clean and never get noisy. Any idea why it's like that ? It even happened on a super sunny Summer day with ISO 100 and super image, but the darker spots (I was filming water) were noisy, and it's almost impossible to make a correction or adding contrast without the noise to be amplified as well.. Thanks.

@ZeekEOSZ 4 года назад

You shouldn't get noise if you expose correctly. Check you EV Exposure Value when you shoot and ensure they're between1-0.1 EV. also use False Colour tool in the ML Menu to check if you're accidentally crushing the blacks. I always shoot 100 ISO.

@HardRocker47 4 года назад

@@ZeekEOSZ Thanks for your answer. Unfortunately I tried various options and each time there is red noise in the shadows. It got a bit better when using the native ISO of the 5DMark3 (160, 320 etc.) but it's far from perfect. Day shots are OK but as soon as there is any darker spot, noise is back... Not much info on internet, but it seems like a few others have that problem. They think either defective camera or got results by using pro Denoiser plugins (in Davinci for example). I think I'll have to live with that. Thanks again for your answer :).

@ZeekEOSZ 4 года назад

@@HardRocker47 Send photos to my Instagram/Facebook if you can, would love to see it.

@HardRocker47 4 года назад

@@ZeekEOSZ Hello Zeek, it's incredibly nice that you want to help :-). Thanks a lot, I really don't wanna bother you with that. I don't have any Facebook or Instagram account, so I tought I could give you 2 MLV clips per GoogleDrive. 5s clips at 100 ISO and 1600 ISO with the same view. I apologize it's not perfect and it got dark here in France when I shot it a few hours ago, but it's so you can get the idea and see what I mean. Even in bright light there is this red noise in darker spots: drive.google.com/drive/folders/16hl29tVEMgsSG3f0jliVfPOQ8HQGXI70?usp=sharing Thanks again !

@HardRocker47 4 года назад

@@ZeekEOSZ Hello, I was wondering if you had the opportunity to check the 2 MLV files. Like I said before, I don't want to bother you and can understand if it's not a priority for you. I think I'll stop trying and shot normal without the Raw option (No noise at all in MOV for the same shot...). Thanks again.

@singhbassan7492 4 года назад

Where are you based? Means country

@ZeekEOSZ 4 года назад

Australia 😎👍

@singhbassan7492 4 года назад

Very nice country I came to Sydney for three days from London where I’m based and one day in Melbourne then after back to London Only 4 days in Austrailia I enjoyed

@ZeekEOSZ 4 года назад

Cheers! It sure is! I prefer Melbourne over Sydney, but yeah, they're all great places! 👍

@TheSandornagy 4 года назад

I like your videos. However I understood why are a bit too dark for me.

@ZeekEOSZ 4 года назад

Great! 😎👍

@florubenberger 3 года назад

man! I really respect your love and passion regarding the original canon eos M! Your channel is a real treasure! Ordered my eos M a few days ago. I hope it`ll arrive around christmas for me to play around with it

@ZeekEOSZ 3 года назад

No problem 😎👍 Freaking love this camera. It's a budget indie raw cam lol. All the best hopefully you get it before Christmas 🎄

@florubenberger 3 года назад

@@ZeekEOSZ Thanks Zeek!

@asidtone6465 3 года назад

I have a red pixel dot on all footage, but only with this sd card. is it the card or magic latern?

@ZeekEOSZ 3 года назад

Get rid of focus dots with these focus pixel maps. Download the zip file. Copy and paste the resolution map files into the MLV App interface. Enjoy! Pixel Maps: bitbucket.org/Dannephoto/mlv_app_compiler-git/downloads/focus_pixel_maps.zip

@dmshawkothossain6876 2 года назад

Hi, can you use magic lantern with Canon EOS DSLR?

@ZeekEOSZ 2 года назад

Yes, specific ones like Canon 650D, 700D, 5D2, 5D3, 6D etc. It's on the website which ones are supported.

@MBFeniks 2 года назад

Is it possible that the MLV App exports ready files to be put on YT ??

@ZeekEOSZ 2 года назад

Yes! You can export H.264/H.265 in Rec709 or whatever.

@mrfender03294 2 года назад

Can i somehow save the videos I edited in the MLV APP, and then export them?

@ZeekEOSZ 2 года назад

Yep

@TrollMeister_ 6 месяцев назад

That was very helpful. Thanks. I didn’t even know about the MLV app. I used ML a long time ago and from what I remember I somehow converted the mlv’s to individual .dng files and graded those in Lightroom ! Then the .dng’s were exported back to some video format. A tedious process. Not fun at all, which is why I didn’t do much ML despite the great video quality. Now that I have a more powerful computer (Mac mini m2 pro) and I will revisit ML with my 5d mark III.

@Terribleguitarist89 Год назад

The end result is absolutely killer, and honestly the aesthetic I love straight out of that app. Here I've been saving my pennies for a used Fujifilm from video/photos... but after seeing a few of these vids about the 5D's with ML I'm realizing I could get the look "that's in my head" for a fraction of the cost. Even a used mark iv is significantly cheaper than the cameras I had sitting in my wishlist. Thanks for that.

@eladbari 2 года назад

Wait, so ML doesn't record RAW file types that could be directly imported to Davinci or Premiere? You must convert them and color correct them first? Does it hurt the whole RAW workflow? I want to play with these RAW flexible files directly in Davinci. Can't do that?

@bygregik 4 года назад

Very useful video, Zeek! I recommend you to do a similar video with your settings when recording, explaining what to change in different light situations, white balance, how to expose with the histogram or the tools you personally use, etc. I think that real time in depth guide would be very useful and a killer in your channel. Thanks for this content, you are a legend! 🔥🔥

@ZeekEOSZ 4 года назад

Cheers Greg! Will take this into consideration 😎👍🎥

@EddieStudios 4 месяца назад

Why do any edits on the mlv app If it doesn't show in your export?

@maciasimagenes 2 года назад

...Whats formats accept? .mov and .mp4 does not to recognize. Just material shoot in MLV format?.

@bumboxing5148 2 года назад

After export from mvl app (dng) I want to put the files into da Vinci but I see no video.. I only see every single frame...try for 2 days very frustrating can someone help please

@danielcristeapro 4 года назад

Hey bud, would love to see a quicker workflow video using MCM rewire & Davinci Resolve if possible. I can't seem to get the grade very well in DaVinci, at least not as good as MLV App. You edit all your videos in MLVApp, even the talking portions?

@ZeekEOSZ 4 года назад

Yep everything is done in MLV App. Me talking to the camera is with my A7rii. I use FCPX for that. I use Davinci mainly with the P4K, but Ive been toying with Eos m files and davinci. I like to use any modes other than MCM rewire with Davinci as you can't get rid of the aliasing like you can in mlv app.

@OpalCine 4 месяца назад

yeah I can't get it to export. It keeps telling me encoder ffmpeg missing in application path. I have no idea what to do then lol

@lamarasamuel 4 года назад

Thanks for the Cinema dng Davinci tip 🙏🏾🙏🏾🙏🏾🙏🏾

@ZeekEOSZ 4 года назад

No problem. I'll be hopefully getting more into the DNG workflow in future sight. It just feels like the Blackmagic way and retains better detail than prores. Both options are great, it's all a matter of what works for you. I've been using prores for more than 2 years. Cheers :)

@Altcine 4 года назад

@@ZeekEOSZ I hope you do get into it more. I just sold my Mac and exclusively pc and Davinci now.

@ZeekEOSZ 4 года назад

@@Altcine Yeah cool, I've just got to get a lot of items and things sorted. FCPX is good for the quick stuff, Davinci is very precise and better for certain things. Amazing move to pc 😎🙌🎥 Best of luck 👍

@ColmDoyle 4 года назад

Good Tips Zeek, so with DNG workflow you would have to colour grade in Premiere pro or DaVinci, so no point making any edits in MLV app??

@ZeekEOSZ 4 года назад

Yes pretty much! 😎👍

@stefanthorndahl1666 4 года назад

except some of the tools inside MlvApp are pretty dang useful, for instance reducing chroma noise. At least it beats doing it in premiere pro/after effects.

@ZeekEOSZ 4 года назад

@@stefanthorndahl1666 yeah for sure!

@lghjsdtugfkgfjgtru 4 года назад

I think the DNG workflow is very useful as a way to correct your footage and set it ready for post so you just focus on editing and color grading.

@pawekowalik8183 3 года назад

@@ZeekEOSZ does it make sense: 1. Export raw files to DNG in MLVapp. 2. Color correct footage in davinci and then export files to Premiere Pro/FCPX. 3. Edit and color grade in PP/FCPX Or should I color grade in davinci as well. Sorry, I am confused after watching many videos at which point Davinci and Premiere Pro/Final.Cut comes in

@dadsonanand5820 4 года назад

So cool using 2012 computer, amazing work!!

@ZeekEOSZ 4 года назад

Haha..yeah, cheers! 😎🤙

@ajuniorofoto 4 года назад

Hello firstly congratulations on your videos, I finally managed to buy an EOS M2 it came with firmwere 1.0.2 and can't move to 2.0.2 can you help me? Thanks in advance for your attention

@ZeekEOSZ 4 года назад

Firmware 1.0.3 is here for the M2: drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/CANON/Canon-EOS-M2-Camera-Firmware-103.shtml

@ajuniorofoto 4 года назад

@@ZeekEOSZ I was able to install 1.0.3 and now what to do, because any other error update

@ZeekEOSZ 4 года назад

@@ajuniorofoto Check my Eos M2 videos as they have the build in the description for the EOS M2. Once downloaded, the 'how to install ML' can be found here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yQRMkXHT9lI.html

@ajuniorofoto 4 года назад

@@ZeekEOSZ Believe me, you've seen your videos many times, with the 1.0.3 file you sent me I managed to update to this version. But I can't go to 2.0.2 to run the Magic Lanter, I always get the error update file canno be found

@ZeekEOSZ 4 года назад

@@ajuniorofoto For Magic Lantern: Firmware 2.0.2 is for EOS M Firmware 1.0.3 is for EOS M2

@TheLorismaister 4 года назад

Hello. Can you record audio + raw video with the MK II ? Also how much footage can the camera handle before havin to stop the recording?

@ZeekEOSZ 4 года назад

Yes audio and raw is fine on the 5Dii. It's all continuous Raw so depends how big your SD or CF Card is. I use 128GB and it takes a long time to fill up. Cheers 😎👍

@DashFlicks 4 года назад

@@ZeekEOSZ I was watching your video and I decided to bring my old 5Dmk2 back to life. i have a golden sandisk extreme rated for 120MB/S but it records at 65MB/s only, camera icon turns red, ML drops a frame and shuts down recording after a few sec. do you think i should get the black extreme pro? is 60-70MB/s normal for sandisk extreme? Recording works fine if I lower the resolution and record below 70MBS. thank you guys in advance!

@ZeekEOSZ 4 года назад

In my opinion, SanDisk Extreme PRO is the way to go. Never encountered issues. I get so many comments about what SD Cards - This is the one! Also, the developer is aiming to bring Lossless compression to the 5D2 RAW Video so you get higher fps, less file sizes.

@DashFlicks 4 года назад

@@ZeekEOSZ ill do that thank you! lossless is great news!

@charles.jwyattjr.6018 Год назад

_can a 2.5Ghz Intel core i5 MacBook run these files

@andys8805 4 года назад

Hello mate, another great video! All your videos have finally convinced me to purchase a second hand EOS M with the kit lens. Quick question, which ND filters are you using to shoot on the EOS M and 5D MKII? I am looking to upgrade but not sure if it is better to go for separate ND's instead of a variable ND? Cheers bro!

@ZeekEOSZ 4 года назад

Great! Go variable ND's all the way. I know people say Singular ND's are better quality, but I've used FOTGA Variable ND's for such a long time now. No issues! 😎👍🎥

@jos7068 2 года назад

So you are doing all your color correction on MLV and only the editing on da vinci ? is this exact ?

@Altcine 4 года назад

I commented on another post here and knew some people already used dng but I just tried it for the first time and literally blown away! The render time and grading potential in Resolve is perfect! Just what I needed bro 🙌🏾

@ZeekEOSZ 4 года назад

Yeah, it really is great! The uncompressed DNG files really keeps the skin tones natural like a C200 and it honestly looks great. I'll still be using ProRes thorough as I slowly work my way through DNG. Good stuff! 👍

@kingsamvisuals 4 года назад

I wonder if magic lantern is dead. This would make my m50 a game changer but it’s seemingly unlikely

@ZeekEOSZ 4 года назад

Not dead, probably just a reduced amount of recognition...would be awesome on the M50 🥴👍

@kingsamvisuals 4 года назад

Zeek I think it’s their ability to mod the cameras themselves. The Digic 8 is proving difficult perhaps.

@ZeekEOSZ 4 года назад

Yeah Digic 8...Darn it. Imagine the EOS M6 MKii with ML Raw 4K 🙌🙌

@rajendrabiswas Год назад

Not getting export audio box to check

@musiceverheard 4 года назад

Thank you very much, for your work, your videos. I will buy Canon EOS M, becouse see your videos. What ISO do you use on the Canon EOS M? I shot with my EOS M (install your new build magic lantern 2020 PRESET mvm1080 (1736x976) + Canon EF-M 22mm (F 2.0) set f2.4, 1/50 (frame tune +0.83 to get shutter speed 1/48.003) ISO 100. And my videos is too noisy and dark in low light, can you give me same advice? If you make tutorial from scratch to final, 1). shoot short 10 seconds video clip, 2). show settings, 3). then show how to edit in MLVapp, 4). Then Final product! Thank you!

@ZeekEOSZ 4 года назад

No problem. I made a video on tips for shooting in low light with this camera here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XTjydKKxRyk.html Speedboosters help and a fast lens e.g. f1.4, F1.8. I shoot ISO 💯

@CINEMA878 4 года назад

Thanks! Great videos. Tell me please the difference between 2 cameras for shooting raw video from EOS M and MARK2. What is better? What are the difference?

@ZeekEOSZ 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nQUttOZTlS0.html

@DavidBerglund 2 года назад

What LCD loupe do you use? I'm looking for something like LCDVF for my 5D3 and I'm curious about other brands and their pros/cons. Thanks

@DavidBerglund 2 года назад

Oh and does EOS M record 1080p continuously?

@cjohnnytai 4 года назад

thank you very much for your video.

@ZeekEOSZ 4 года назад

No problem! :)

@kei669 5 месяцев назад

how much time to have a render to use in premiere?

@JuanRodriguez-vb1ny 2 года назад

Hey zeek when I export my clip it'll only export 1 frame is there a way to export the full clip intead of just 1 frame?

@ZeekEOSZ 2 года назад

In MLV App, check the frame time in the right panel, press the red X to reset.

@st.michaelthearchangel7774 3 года назад

Thank you for the receipt! Just for clarification, when exporting with Uncompressed DNG, it does not export the changes to the video made in MLV app?

@ZeekEOSZ 3 года назад

No problem and correct. Only the Raw correction section and "cut in, cut out" to shorten the clip.

@streetjam1225 2 года назад

does the 5d m2 workflows the same way?

@GabrielTeixeira91 4 года назад

Hi Zeek! How many minutes can the EOS M record in the 1080 raw? can it record longer videos like 10-20 min without overheat or crash?

@ZeekEOSZ 4 года назад

Hi, yes it can. Records continuous Raw, no heating or crash. A good SD is required, e.g. SanDisk extreme pro.

@rajendrabiswas Год назад

can mlv work in m1 Mac

@renedohme6838 4 года назад

Hey Zeek! My material with the eos m is rustling at iso 100 in the shadows. I habe the same settings how you. What am I doing wrong? Can you help me please?

@ZeekEOSZ 4 года назад

Use the histogram and check your EV (Exposure Value). Should be at the bottom left or right of the screen. Make sure it isn't above EV 1.0 e.g. 1.1, 1.6, 2 etc. Otherwise you'll get noise. Use a fast lens e.g. f1.4, 1.8, F2 etc, as well as a speedbooster.

@jessetimmmiller1870 2 года назад

Hey, Zeek! I'm really inspired and blown away by the cinematic quality of your videos; the EOS M, especially!! Wow!! What lens are you using on the EOS M @ 0:33? I really want to shoot wide-angle cinemascope style, and I'm not sure how to best approach that with the crop factor, Viltrox, etc. I like the anamorphic wide-angle look, but I don't love lens-flare. Any thoughts/suggestions? Thank you!!

@ZeekEOSZ 2 года назад

That was with a Pentax 28mm F2.8 lens. My favourite lens right now is the Canon 17-55 IS. Sigma or Tamron 17-50 are also good. If you want to shoot wide, then the Tokina 11-16 with a speedbooster could do.

@roman9887 2 года назад

MLV won't open another regular file recorded in Canon? Just a file recorded via the Magic Lamp?

@ZeekEOSZ 2 года назад

Yeah, just .MLV files from magic lantern RAW

@dutchflyingpilot 4 года назад

Interesting workflow Zeek. Thanks! And quite surprising too, no Log-C conversion! Will give your receipt a try soon.

@ZeekEOSZ 4 года назад

No problem! You don't want to spend too much time on MLV app. Just paste the receipt you've made across all then.mlv files and then make the adjustments you need per clip. Cheers! 😎👍

@ferranarumi7599 3 года назад

Hi Zeek I hope are you fine! to export and finish the footage in final cut pro x what is the best conversion?, and where can i find good luts for mlv. Thank you very much for your advice

@ZeekEOSZ 3 года назад

I normally export as DNG Raw these days, grade it in Davinci and then export seperate clips as ProRes 422 HQ and then order the clips in FCPX and export. I have my DaVinci Resolve workflow on my YT Playlist 😎👍

@eti1687 4 года назад

Do you think shooting black and white would work on the EOS M? And if so, how would you go about shooting it?

@ZeekEOSZ 4 года назад

Black and white would be done in post in MLV App. Easy, reduce saturation all the way down or apply a B&W LUT.

@demockracy84 3 года назад

What about exporting with a program like Premiere CS6? What sequence settings are recommended?

@ZeekEOSZ 3 года назад

I recommend export as DNG RAW.

4 года назад

Nice! Have you noticed any flickering issue after playing with the highlights (as you'll get with adobe camera raw)?

@ZeekEOSZ 4 года назад

No I haven't!

@reyhandelvarisuryansyah7231 4 года назад

Nice video man, really helpful especially for a beginner like myself. But since I'm recording at 1080p with the EOS-m, does exporting it to 4k or 2k on MLVapp would make the video better?

@ZeekEOSZ 4 года назад

Yeah upscaling it to a higher resolution makes it look better. Raw information can hold a lot of data. 😎👍

@josephasghar 4 года назад

I’d be interested to know how long you can record continuous raw with ML on the 5d

@ZeekEOSZ 4 года назад

For as long as your battery or card can hold 😎👍 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FeoSjDo6YPQ.html

@nikoonikoo 3 года назад

Hi Zeek, I use SanDisk Extreme pro with 170mb/s write speed. Recording with 1080 14bit option. Pink screen flashing consistently every 5 to 6 sec of video in MLV file. Am I doing something wrong on setting? Fixable? Thanks for your help

@ZeekEOSZ 3 года назад

Check you're not shooting 30fps. Also,.could be a fake card, if possible do an SD Benchmark test.

@nikoonikoo 3 года назад

@@ZeekEOSZ correction: card is write at 90mb/s SanDisk Extreme pro , sold from Amazon. I will run a benchmark test and see if my fps is set wrong. What about the video clips now? Fixable? :(

@ZeekEOSZ 3 года назад

@@nikoonikoo You mean 95MB/s? As for the clips you will have to zoom in the timeline and delete those single frames, apart from that, no other way.

@nikoonikoo 3 года назад

@@ZeekEOSZ Got it. Thanks Zeek :)

@nikoonikoo 3 года назад

@@ZeekEOSZ 90mb write and 170 read, 64 GB, sold and ship from Amazon. I just order the 2nd copies and test out if the previous card is defected

@rssingh5723 4 года назад

Brother please tel me about is mlv app working on low end pc. and how much ram , memory, processor required minimum

@ZeekEOSZ 4 года назад

For low-end PC, DNG Uncompressed Export for Davinci/Premiere PRO would be your best bet, the rest will export slower. I'm using a MacBook 2012 so if it's better than that, then you should be good. The website for MLV App doesn't state the requirements so I'm not sure the minimum specs. I would assume 8GB to be the minimum, 2.2Ghz and above, with SSD and good graphics card.

@rssingh5723 4 года назад

Thank you very much, GOD bless you

@MaSc 4 года назад

@@ZeekEOSZ For low-end PC, your MLVApp workflow should be best, because Resolve and or Premiere very often won't run on such computers. Min Spec for MLVApp: you need about 1GB RAM and any x86 processor Windows7, Linux or OSX 10.9.5+ supports, no GPU. Btw: nice vid! ;)

@ZeekEOSZ 4 года назад

Thanks Ma Sc 😎👍. Trust me, I've tried a few different computers. I thought GPU was important with MLV App, but it wasnt. I have a laptop with NVIDIA GTX 1080 GPU but there is not much difference. For Davinci and Adobe, yes, but not MLV Export. What would be the most important hardware for MLV App? CPU? e.g. i7 9th Gen. My friends iMac 2013 i7, 1TB Fusion Drive with NVIDIA GTX 760m handled MLV ProRes export the quickest I have seen and playback is between 17-20fps.

@MaSc 4 года назад

@@ZeekEOSZ The MLVApp code base is 99% for CPU, just the viewer itself runs via OpenGL (dragging and zooming). GPU processing code is very different and we have not found someone who can help there. So for now MLV export is always on 100% CPU. We made most of the algorithms (not all) multithreaded, so the more cores you have, the faster the export will be. This iMac's i7 has 4 cores + HT, so it works with 8 threads. That makes it faster. And on OSX it will always be faster than on Windows :) Best is having a fast desktop CPU with many cores.

@MrJonasLV 4 года назад

Yo Zeek! Awsome video man, I love your work! I've been wanting to ask you if you have any experience with filming indoors in low light? I got the EOS M a couple of months ago and i love using it so far. However i can't seem to get the exposure right (between 0.1 and 1 on the histogram thingy in ML) when filming indoors in low light. I get this red/green noise in my shots which makes them look terrible. On the histogram it shows that the picture is overexposed. I tried using chroma smooth 3x3 in MLV but it doesn't remove the noise. I tried looking for an answer in the ML forum but dude that place is impossible to navigate! Do you know how to fix this? Cheers from Denmark :)

@ZeekEOSZ 4 года назад

Use fast lens with a speedbooster. That would definitely help heaps. E.g f1.4 or so! I'll make a video about lowlight soon ,😎👍

@MrJonasLV 4 года назад

Cool! Thanks! I'll look into it 😊

@bthemedia 4 года назад

@12:43 and @12:46 using Final Cut Pro, there seems to be some video clip artifacts going back to your MLV app export settings?

@ZeekEOSZ 4 года назад

Haha...yeah it was late at night and I forgot to delete those clips above the timeline when I exported.

@rssingh5723 4 года назад

Brother i have hp core i3 Intel Core i3-5005U Dual Processor4GB RAM, 500GB HDDIntel HD Graphics 15.6 HD Antiglare Slim SVA Display1HDMI, 2 USB 3.1, 1 USB 2.0Windows 10 Home Is MLV APP work on it ?

@ZeekEOSZ 4 года назад

Yes it will work. Download my raw files in the description and test them out in mlv app. Download MLV app first and try exporting these files with both Uncompressed DNG and then ProRes.

@rssingh5723 4 года назад

@@ZeekEOSZ thanks a lot

@eeramzi 4 года назад

Great Video As usual, I would like to know how to focus pull with 7artisian 25mm Thanks again.

@ZeekEOSZ 4 года назад

Cheers! It's so small...great lens. Yeah, i'll see what i can do.

@realalexandergiron 3 года назад

Hi Zeek! Followed your video and exported a video from MLV app in 4K, however, when I export the master file from Final Cut, it shows that it will export in 1920 x 1080 and doesn’t give me the ability to export in 4K. Do you know what I could be doing wrong?

@ZeekEOSZ 3 года назад

In FCPX, start a new project and set 3840x2160 for the timeline not 1920x1080 👍

@realalexandergiron 3 года назад

🤦🏾🤦🏾🤦🏾 Thank you so much Zeek! I should’ve known I was doing something dumb lol

@thegodfather4713 4 года назад

Wooowww Thank you brother. A 12-year-old machine is still doing incredible work. When I have a Canon 5DM2 I don't need to switch to 5DM3 or 5DM4. Thank you for this amazing and useful video. We would appreciate it if you let us know about up-to-date information and mistakes about the canon 5D Mark2. God bless you.

@ZeekEOSZ 4 года назад

No problem, I just recreated the best build for the 5D2, I'll make a vid soon 🎥☝️💯

@thegodfather4713 4 года назад

@@ZeekEOSZ God bless you

@LouisLuzuka 4 года назад

So happy I found this video maybe I can optimize what I have because it's been frustrating!!

@ZeekEOSZ 4 года назад

DNG Exports or .MP4 high quality is what I export if I need smaller file sizes.

@LouisLuzuka 4 года назад

Zeek thank you zeek!!

@leefaurie780 4 года назад

Help! When i export, no matter what settings i use, my video comes out stretched horizontally. I followed your settings exactly. Footage is 100% when viewing in MLV, no stretching. But once exported the clip is stretched. When i view in VLC or premiere post and even when exporting from premier post the footage stretches horizontally. Any suggestions for what i am doing wrong?

@ZeekEOSZ 4 года назад

Check your resolution settings for export. What mode are you shooting in?

@leefaurie780 4 года назад

That’s exactly it! Thanks so much, was setting the 16:9 ratio instead of 4:3 for export. Really appreciate the help.

@samuelpolimeni4150 4 года назад

Hey man Thanks for the info, how come I can never export the audio? I am just not able to tick the option.... any Idea?

@ZeekEOSZ 4 года назад

You must have fps override in the export tab. Fps override will not allow audio export.

@Rob_-dv6ei 4 года назад

Having trouble getting sound with my video when I export to Final Cut Pro X - the video is fine but the sound just disappears! Have I missed something in the video or could you give me a little hand here? Great video by the way, up to this point you answered all of my life's questions!

@ZeekEOSZ 4 года назад

make sure you haven't ticked "fps override" or that you have enabled sound in the export settings.

@deepak.sehgal001kumar5 4 года назад

hy zeek love ur work ,nd quality of videos, i just want to ask when i shoot video with my canon 700d with Magic lantern , i shoot video in hdr mode , problem is video having so much flickering , overexpose and underexpose ,i think magic lantern didnt merge automatically these flicks , hope u get wat i want

@ZeekEOSZ 4 года назад

You merge these in MLV App. In settings export, you enable HDR. 😎👍🎥🔥

@deepak.sehgal001kumar5 4 года назад

@@ZeekEOSZ thanks for replying back will definitely try this method

@NotanStorm 3 года назад

Hi from Kazakhstan! Very useful video! Thank you ☺️

@ZeekEOSZ 3 года назад

😎🙌

@sergelebas 4 года назад

Yes!!! You re the Boss 👍

@ZeekEOSZ 4 года назад

😎👍🎥

@xuwenxuan9613 4 года назад

Hey man, absolutely beautiful image! I am planning to buy a eos m or eos m2 . But I know some other Canon camera have aliasing problem when using ML, and is this a problem for Eos M?

@ZeekEOSZ 4 года назад

Yes aliasing is present. But in MLV App you can enable CA desature to 100% which will reduce the presence of aliasing with a little bit of reduction to quality. I would go with the M instead. In both the anamorphic mode and 2.5K there is no aliasing.

@morefossa8410 3 года назад

versi mobile pleas🙏

@rogierkraan 3 года назад

Thank so much for sharing this. have been looking for a good software to work with MLV for a long time and this is just incredible. Great that you added all the links aswell!

@ZeekEOSZ 3 года назад

No problem 😊👍

@CAllen-rv1ek 4 года назад

Hi Zeek! Apologize if this is a dumb question, but is there any way to trim raw mlv files in ML or MLV App, or any other app? I've been shooting clips that are several minutes long but only want sections of them (waiting for mama bird to feed baby birds, etc). I haven't figured out how to trim the raw mlv so I'm running the whole file through MLV App, then cutting the excess afterward in Shotcut. I'm using a really wimpy PC; getting a 7 min clip out of MLV App takes 4+ hours (using H.264). Hopefully that makes sense. This is all new and I'm stumbling along. I certainly would have thrown in the towel on ML if not for all the detailed help, inspiration, and -- for sure -- links where you've just done it all for us. It is VERY much appreciated. Thank you!

@ZeekEOSZ 4 года назад

Yeah you can trim in MLV App. Top right it shows you the frames e.g. 1 to 3567, you can trim to what you need e.g. 400-867 frames instead of the whole thing.

@CAllen-rv1ek 4 года назад

@@ZeekEOSZ There it is, cut in and cut out, can't believe i missed it! 😣 You just saved me a lot of time. Thank you! 🙏

@ZeekEOSZ 4 года назад

Great!

@SergMartn Год назад

Hello! Great videos! Can you tell me what SD memory card do you use to record RAW video? In my Canon 6D i use a SD v30 speed memory card and the camera only records 12 seconds and stops recording..

@pierpaolodemejo933 2 года назад

Hi @Zeek great video! I was wondering how to export the best best quality and the most flat and unprocessed file from MLV (I would like to have more possibility after, when I'll be in the color correction process). I tried with DNG uncompressed, but when I go into première and I import the file, it's quit different from the flat result that I could se on the MLV preview (the file is a bit less flat and a bit tending to yellow). Did I do something wrong? Would you please give me some advice to reach what I want? Thanks!

@noisemedia5336 3 года назад

makasih bg zeek.. lot of thank you~

@ZeekEOSZ 3 года назад

No problem 😊 👍

@hal4tt 4 года назад

The picture with this receipt looks stunning. U think it's gonna work well with some LUT?

@ZeekEOSZ 4 года назад

Yeah for sure. Many ways to edit these footage! 😎👍

@andregorgievski7035 3 года назад

Great tutorials Zeek! I'm having a problem when exporting. I followed your guidelines but the videos often export much much shorter than the original length. Settings are normal with no in and out points, Mlv files are exported from and too my hard drive. Can't figure it out... any suggestion would be awesome. P.s. I'm a fellow Melbournian:)

@ZeekEOSZ 3 года назад

Hey, check your frame count box in MLV App on the top right panel, the one with RED X. Shows you your starting frame and end frame before export. Make sure your not losing or skipping frames.

@andregorgievski7035 3 года назад

@@ZeekEOSZ Thanks Zeek. A work around seems to be just to keep reopening the MLV app from time to time.

@الحياةالحياة-ح3ظ 7 месяцев назад

I need free editing

@andregorgievski7035 3 года назад

Hi Zeek, is there a way to avoid or get rid of the "pinkish" highlights especially from i.e. street lights or car lights? If you have a quick tip to share would be great. Many thanks!

@ZeekEOSZ 3 года назад

Yes, in MLV App enable the Highlight fix, also reduce white level slightly until the pink highlights dissapear.

@andregorgievski7035 3 года назад

@@ZeekEOSZ Infinite gratitude

@Niceguy54444 4 года назад

lol i did a lot of test and only iso 200 looks acceptably, iso 200 from oes m looks like iso 1600 from 5D picture xd

@ZeekEOSZ 4 года назад

Try using ISO 160, 320, 640, they should give better increase ISO performance. I normally Always shoot ISO 100.

@Niceguy54444 4 года назад

@@ZeekEOSZ thank you

@INSTINCT777 4 года назад

On eos m in mcm rewire 1080 with 3x crop i get some dots on the top, pretty much in the first pixel line of the footage (16:9) i got the focus pixels removed and image is very clean but these are very persistent. Are they normal or do i miss something? Thx ;)

@ZeekEOSZ 4 года назад

You need to install focus pixel maps or enable 3x3. To install focus pixels follow this page here, reply #688: www.magiclantern.fm/forum/index.php?topic=16054.675

@INSTINCT777 4 года назад

@@ZeekEOSZ thank you so much! Will try! :)

@INSTINCT777 4 года назад

@@ZeekEOSZ So i installed the maps and reloaded the programm. But the pixels are still there. They are very small but easy to notice. Even better with a black and white lut. They are very small and in the first line of the footage on the top. Can you notice them in your footage? I have another question. I tried to shoot in 25 fps in mcm rewire 1080 but it always messes with either image (flickering colours) or the settings for example the shutter. I also tried to change settings in canon menu from 25 to 24 didn't help. Do you think it is possible to shoot 25fps 1/50? Thank you zeek!

@DavidPhilp81 4 года назад

Zeek I need your help bro! I just got the eos M, been following along with you. When I look at my footage, I see these frames that flash up on screen that don't look synced up. It basically ruins my footage. Also, the export audio tab is always greyed out for me? Example of the footage here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VhevMws-Vi4.html

@ZeekEOSZ 4 года назад

Check your video settings in the normal Canon menu and make sure you are not in 30fps. Also monitors can bring about this. SanDisk Extreme PRO cards are the benchmark. Audio tab is greyed out if fps override in mlv app export is enabled.

@DavidPhilp81 4 года назад

Zeek thank you Zeek! I knew you would have the answers! Should I be in 24 natively on the canon camera?

@ZeekEOSZ 4 года назад

Yes. 😎👍🎥

@DavidPhilp81 4 года назад

Zeek ok I applied the settings and that was the fix. New footage looks great! Plus I have audio now! You are my eos M hero bro!

@ZeekEOSZ 4 года назад

Glad to hear 🎥🤘