How to Engineer the PERFECT Differential Cover

Подписаться 445 тыс.

Просмотров 495 тыс.

50% 1

What should the perfect differential cover do? Minimize lubrication foaming and aeration, reduce temps, improve mileage, and look bitchin. There’s only one on the market that does all four and Gale Banks is going to show you how!
Available for:
2001-19 Chevy/GMC and 2003-2018 RAM with AAM 11.5" or 11.8" 14-bolt rear axle
1985-22 Ford Sterling Axle 12-bolt with 10.25"/10.5" ring gear
2017+ Ford F250 HD tow pkg and F350 SRW with Dana M275 axle
2019+ RAM 2500/3500, 2020+ GM 2500/3500 with 14-bolt AAM axle, 11.5", 12" ring gear
Watch the full "Behind the Diff Cover" video series here:
/ playlistlist=plwtmrqcw...
The final chapter in Banks' Behind the Diff Cover Series, this episode kills wives' tales and puts rumors to rest. It's the culmination of hundreds of man-hours of R&D.
The new patented Banks Ram-Air Diff Cover cools 5X better than all flat-back covers. It’s the best at lowering fluid temperatures, it increases fuel economy over flat-backs and helps your axle bearings, carrier bearings, pinion bearings, and the ring and pinion gears last longer.
Banks Power exclusively uses and recommends Amsoil SEVERE GEAR® Synthetic Extreme Pressure Gear Lube. All Banks vehicles in this test series used Amsoil 75W90 gear lube.
Order your patented Banks Ram-Air Diff Cover for GM, RAM, and FORD pickups.
www.bankspower.com/diffcover
#differentialcover #diffcover #engineering

Авто/Мото

Опубликовано:

30 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,3 тыс.

@FishFind3000 4 года назад

“These asshats!” Banks - 2019

@seanwatts8342 4 года назад

I'm going to start using the phrase "8 quart asshat."

@Sicktrickintuner 4 года назад

Science!

@SnifferSock 4 года назад

One of the greatest insults man has come up with.

@Vern.Anderson 4 года назад

well their diff covers do look like top hats...I LOL when he said that

@VegasJPH 4 года назад

21:45

@benjaminwatkins7345 4 года назад

Is this what getting old feels like? I just watched a 30-minute infomercial and I wasn't bored. And he did pick a good way to raise his middle finger to his competitors

@lucascarter1641 4 года назад

Damn i hope not. Im 20 and did the same thing😁

@fredpinczuk7352 4 года назад

This isn't an infomercial as much as its a series on reverse engineering, root causes analysis and proof of concept. No fluff here.

@skinny-peters-JR. 4 года назад

this guy is so good of what he does and makes. ..he could take a broom stick & put fins on it and do some tests and say that it will increase mpg's on a old cat v8 diesel. ...time to whip out my credit card. .I'm sold....... this guy knows he's shit when it comes to proving it the RIGHT WAY...& working 100% correct. ... ....mike from minnesota. ...

@redram5150 4 года назад

Now that you mention it, I feel like it’s 1988 and I’m watching a prime time infomercial with my family. Pretty soon a 911 is gonna be rolled out to prove a sand blaster won’t affect Formula 2001’s sure-coat finish!

@doublebulbing 4 года назад

@@fredpinczuk7352 exactly this is the kind of science kids need to learn in school

@resuort 4 года назад

*quietly installs the factory diff cover back on to his truck*

@Rollin8.0 4 года назад

Under rated comment here!

@davidmani8599 3 года назад

😂👍🏽

@tombushman8029 3 года назад

Best cover to have

@texasslingleadsomtingwong8751 3 года назад

Lol , so true

@alekszamorano482 3 года назад

and he was like i want some money from youtube thats all to help me on my retirement .. kkkk😁

@buggerlugz6753 4 года назад

I've got to say it makes a refreshing change to see a car/engineering based you-tube channel who treats viewers like educated adults. Really interesting and highly informative, every single video. Its like the best infomercial ever, you can't argue with the figures! Keep up the great content Gale!

@seppe2078 3 года назад

it is like the old black and white infomercials where they teach you how it works like this one about transmissions ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JOLtS4VUcvQ.html

@jetn4677 7 месяцев назад

how much were you paid to comment this lol. i noticed in the back he had some gear oil, i thought it was his own, when he mentioned he could only find one company that provides information on gear oil, i thought hes gonna plug his own oil, he says ams oil, i laughed, of course let me guess hes got a partnership with them, and whadda you know, hes partnered with them lol, snake oil.

@mmmark8737 4 года назад

Never thought I would want a dif cover so badly without owning a truck.

@Luckingsworth 4 года назад

Same bro. I want this for my Corolla! Lol.

@matteightytwo 4 года назад

A have a diesel TT, I don't know how I got here, but I've got a rear diff and I want a banks cover.. great for all the towing and off road yknow

@rotor13 4 года назад

I love this video so much, I'm buying a truck just to get that diff cover XD

@user-rd8ku3dy3m Год назад

😂 Amen to that! I am waiting for a new dash HD Duramax restyle. Looks like I have to buy cover in advance.

@mrphiscal 8 месяцев назад

Gale you have a untapped market in the import market 😢.

@vwfreshness459 4 года назад

Please clone Mr. Banks. Every high school in America needs him to teach our children. Thanks Mr. Banks for putting all other companies on notice.

@miatafan 4 года назад

“The first thing I did was salute it” 😂 killed me

@kirara4953 4 года назад

This video was made 6 months ago. 6 MONTHS AGO The amount of information for this ad feels so alien compared to every other manufacturer for anything. No claims without data. No dumb eye catching cinematics of slogans. Just straight, sweet, facts.

@TowPiglet 4 года назад

The dislikes are the other diff cover manufacturers 😂

@erickvorst5776 4 года назад

That's what I thought. And the ones who bought them. Lol

@met9009 4 года назад

haha but really he is a sales man, the product seems to be good overall. He comes across as slimy to me. He is twisting stuff and doesn't need to, let the product sell its self. Similar if not the same as stock fuel economy, way better cooling, and extra lubricant to the axle tubes. He tries to distract you with test results and visuals and doesn't give the whole story is one example. My two cents like the product comes across as a car sales man. :D

@met9009 4 года назад

@@HolidayArt Good points! :D haha

@MrTheHillfolk 4 года назад

@@HolidayArt My dad's got a few patents. It's not a huge deal but an interesting tidbit.

@406Steven 4 года назад

The dislikes are from brodozer owners that want to get the cheapest, "sick"est covers on Amazon/eBay with the best advertised rating.

@sonofdad0621 4 года назад

Diesel tech would be 20 years behind without this legend!

@juancornetto8243 4 года назад

Errrrm no. America is 40years behind Europe on engine design.

@scythelord 4 года назад

@@juancornetto8243 Errrrm no. that's false.

@HyperXism 4 года назад

@@juancornetto8243 Then why did VW have to cheat in that field?

@hudsondonnell444 4 года назад

@@juancornetto8243 Daimler sent Diesel engine design backwards with the introduction of DEF to the emissions system.

@phanto4 4 года назад

@@hudsondonnell444 that wasnt daimlers fault, thank commiefornia for that shit

@BBaxter800 4 года назад

More fluid takes longer to heat up, but in that cool down test after the hill climb it also showed it will take longer to cool down. The mag hytec only dropped 6.5 degrees whereas the stock cover dropped 10 degrees and the banks dropped 14 degrees. always interesting watching Gale's videos, learn something in every one!

@Airwolf1971 4 года назад

I know one thing. Not only is Gale Banks one Hell of an engineer he is also one Hell of a salesman.

@Thelastcritic 4 года назад

I've worked in sales. I always ask for all of the information. "If you give me all of the information, I'll figure out who needs it." Gale gives you facts and lets you make an educated decision. You also trust that if someone else was doing it better, he would tell you. Integrity and proper education will sell anything.

@wesleyrichardson2841 3 года назад

@@Thelastcritic Naaa. If someone else was doing it better he wouldn't have made the diff cover.

@micahknapp3687 2 года назад

One honest man too

@BadAssEngineering 4 года назад

We dont deserve Mr Banks, may the Gods of Speed grant him many more years of excellent health and happiness

@timsmothers8740 4 года назад

He Looks Great and is still kicking serious ass in Engineering. A Definite Legend He is ! And Please Yes I,hope that he sees many, more years of whooping asses I'm very happy that I, have maintained my stock cover on my 05 F350 Dually, because I, will going with his cover,and perfect timing as my next gear lube change is approaching. Thank You GB for Your Passion.

@scottcampbell2836 4 года назад

Another brick to his awesome Future legacy of automotive performance. Well done sir!

@DesertRunner602 4 года назад

He cares about his customers

@shekharmoona544 4 года назад

If he was English he would be knighted for his contributions to society.

@stephendwinells8260 4 года назад

I couldn’t say that any better he is a hero among gear heads.... we will never see such motor hero’s like a Carroll Shelby or a Gale Banks ever again god bless live long Mr Banks

@jeep2003 4 года назад

Thats awesome. You should give a discount when people send in their old covers to b melted down into banks covers lol

@philtripe 4 года назад

something only a Jeeper would say....Gale will magically turn your stamped steel cover into Aluminum ingot!

@user-vd9fz5ey9m 4 года назад

@@philtripe i guess common sense would say he is referring to the other shit aftermarket covers. i guess you were too concerned with trash talk than thinking.

@davecalico3273 4 года назад

hear hear - totally agree

@nicknick9081 4 года назад

I’d agree, but with their substandard “engineering”, they have probably used substandard aluminum. But I like where your heads at!

@mitchellparham1396 4 года назад

That was an engineering wonder.

@CTrane82 4 года назад

He really sold me when he called them “Ass Hats”.

@westtexastll1978 3 года назад

@ Banks Power If one actually takes Gale's statement literally, that what those "flat-back" diff covers LITERALLY are: "ass-hats". 🤭🤣😂 (He just didn't say, "pun intended"... 🤣)

@chrisweivoda9592 2 года назад

It's great how he calls them asshats, saying extra fluid is bad and doesn't help with cooling, and then proves himself wrong when the aftermarket cover with the extra turbulence runs 28 degrees cooler than a stock cover and fluid amount in his test, proving the extra 3.5 quarts of fluid is helping cool by overcoming the extra turbulence and still running 28 degrees cooler. Classic 😎

@charltonf250 2 года назад

@@chrisweivoda9592 So double the amount of oil you pay for to make up for shitty design?

@chrisweivoda9592 2 года назад

That's not what I said at all. My point was he's saying extra fluid doesn't help cooling, then proves extra fluid, even with a worse design, runs cooler.

@tedshredz58 3 года назад

Industrial mechanic here. I REALLY like this vid. The bearing and lube theories we used for reduction gears was, while static, the lube sump level had to be 1/3 of the way up the lowest rolling element (bearing or gear) in the assembly. That would allow for the distribution of the oil by drawing it up and over the other elements. Any deficiencies, like all of the ones pointed out here (cooling, distribution of lubrication), is a design issue. Well done...

@JustinRaymer 4 года назад

Flat Backs: More oil will make diffs cooler Gale Banks: Hold my fluid dynamics

@bankspower 4 года назад

😎👍🏻

@mrolsen6987 4 года назад

@@bankspower 😂👍

@KrKrypton 4 года назад

@1cent if you have a gas heavy duty you have the same rear axel as a diesel.

@shimes424 4 года назад

*thermodynamics

@user-tf5kr4qp2i 4 года назад

1cent well then you don’t need any thing fancy in a princess half ton

@Omnis2 4 года назад

This has been a long time coming. I suspect they were waiting for their patent before they stopped teasing. Thanks, Gale. Love long and prosper bitchinly

@Markworth 4 года назад

There was probably supposed to be another video before this one, but they blew up a dyno in testing.

@Time30013 4 года назад

Someone who puts this much work and excitement into a diff cover makes me think he enjoys his work and really cares about what he is doing and doing it right.

@TheShift1313 2 года назад

I wish all companies went through this sort of rigor to design products! As someone who is in the 3d design field i can relate to being in a meeting and the boss scrapping everything :) but this was for good reason. Looks like an amazing product!

@frankshanks9726 7 месяцев назад

I’ve had this on my 24 GMC 2500 for months now and It makes zero real world difference.

@duggydo 4 года назад

I wish more manufacturers were as smart and diligent as Mr. Banks.

@jaydunbar7538 4 года назад

They are, they just focus on different customers. Banks focuses on customers who are willing to pay for quality R&D and aren't afraid of doing their own research. That leaves millions of available customers who just want something not stock that still want a product to buy.

@aliefdrumline 4 года назад

Guy is pretty much a savage. straight savage. crushes everyones designs and feelings.

@scottcampbell2836 4 года назад

His generation dont give a shit about offending people. We all should emulate this trait.

@rudystraight1750 4 года назад

@@scottcampbell2836 everyone gets offended. You sheeps act like u wont get offended almost like u dont have feelings

@Rollin8.0 4 года назад

He's a savage but he's got so many runs on the board there are very few manufacturers who could take him to task on it - seems like everything he makes is the best product you can buy.

@Iwasthere1415 4 года назад

You can always count on Banks to give us the info that’s actually useful , and school the comp in the process 👍🏼

@blendpinexus1416 2 месяца назад

a good experienced engineer's intuition is indespensable. banks took one good look at the other diff covers and he just knew something wasn't right.

@shitboxoffroad 4 года назад

RIP aftermarket diff covers!

@jaydunbar7538 4 года назад

The banks cover is aftermarket as well

@vmaxes 4 года назад

@@jaydunbar7538 you missed the point of his comment...SMH....

@Sproutt 4 года назад

Lolz after watching this video I see other trucks with the "flat cover" and I just laugh.

@playdg 4 года назад

Exactly how many truck diffs have you seen in the last 20 minutes?

@therealboofighter 4 года назад

What did you think before?

@thecustommuffler 4 года назад

Ive been laughing at mine now. For some reason I feel very stupid with it :)

@Sproutt 4 года назад

@@thecustommuffler this guy Gale Banks is a smart cookie man I was gonna get one too trust me... ut I went the cheap route and just powder coated my stock one turns out that's the better route, unless you get a banks diff cover.

@Sackmatters 4 года назад

Jeff Thorstad where I live it’s about 75% of the vehicles on the road.

@Patriot-bn9om Год назад

They "even pressure tested the damn thing" at 31:34. Gotta love Gale. He's a legend.

@kgkeys 4 года назад

Will Gale Banks run for president? Man of science, man of reason...

@MyCatInABox 4 года назад

"...so before you copy me again, Pump The Brakes!" ...lol

@logobot 4 года назад

MyCatInABox legend

@jonfurse3931 3 года назад

Makes a feller wonder if he's been watching Letterkenny.

@cavemanjoe79 3 года назад

I believe they have seven years to wait before copying the patent. After this series of videos I'm changing to their new one for the Ford 10.5.

@realRickSanchez 4 года назад

Now I have to buy a truck to install a Banks diff cover.

@nilnine1231 4 года назад

I dont know why I watched this. I dont do trucks. I drive a ricemobile. I wish i could buy things from this man. dude just builds things better then everyone else then proves it.

@jmackinjersey1 4 года назад

I can honestly say that after watching that entire video, I am extremely impressed, and that says a lot. If you have taken that much time and energy to make something as simple as a rear diff cover even better than the one from the factory, and better than pretty much anything else on the aftermarket line up, I am pretty sure that the mainstay products you originally made are just as impressive. I have been around cars, trucks and heavy equipment for more than 90% of my life, and I have heard of Banks equipment for a long time. But I haven't really gone too far into the aftermarket or hot rod section of the diesel industry. My experience with diesel is extensive, but mostly just for repair. I keep the gas side for the hot rodding. But now that I am in the market for a new 2500 series truck and pretty much getting the diesel engine option, I am definitely putting Banks on my list of improvement, aftermarket parts. Thank you for all you do.

@ArcticAstrophysics 4 года назад

The fact that it shears off if you do run over and hit something is a good design because it means you wont won't crack the housing and lose any diff fluid it will just shear the fins off

@ToAstYNaChO 4 года назад

Yes, That's the point.

@mememaster147 4 года назад

I feel like it would be better to have an Xtreme Offroad™ version without the scoops and with fins that only extend to the edge of the cover, specifically for use in environments where you're likely to whack the diff on something. I doubt anybody will be doing 55mph offroad anyway, so the scoops probably aren't as much use at low speeds.

@noxious89123 4 года назад

@@mememaster147 You can just do a rapid uninstall of the scoops yourself, with nothing other than a 4lb hammer! :D

@SCwrestlerTTSB 4 года назад

@@mememaster147 the only thing is with the exception of Baja racing you aren't going to get air flow off road over the cover to get cooling anyways. That's why most of the off-road differential covers are extremely robust and some of them have an exoskeleton girdle to protect it from getting dented in or broken. They are much more worried about that than they are the airflow

@alangwin3891 4 года назад

This guy is quite the salesman. The stock covers are fine as far as fluid temp is concerned. The MagHitec covers have a port on top for a temperature sending unit and yes they run cooler than stock. Then there’s the millions and millions of real world testing without any issues that I’ve heard of. The reason guys have been running these flat covers for the last 30 YEARS is for the drain plug, dipstick, fill hole and you don’t have to remove 14 bolts every 15000 miles to change the fluid. And they’re not designed to break on purpose.

@Ozgrade3 4 года назад

Wow! "If you snag the diff and break it....I'll give you another one". This is a man who stands behind his product. He is a living gem. America has suffered a huge loss of engineering prestige in the eyes of te world in the fallout of the 737 Max fiasco. Gale Banks is single handedly reminding us that American can still do "good engineering".

@Airman.. 4 года назад

America has the best engineers in the world working on DOD sophisticated technologies

@rogerpearson9081 4 года назад

Im an Aussie and he is what made America great before weasels took over.

@michaelrighi8727 4 года назад

Gale Banks... his RU-vid channel is a MasterClass.

@euphoric5172 5 месяцев назад

This is why your products are better than competitors, you do the important testing to actually see if the part works better than the original, everything about it has been thought about and designed so well.

@ryanburbridge 4 года назад

Lol i want a behind the scene clip of dude turning that axle at 11:40

@803Garage 4 года назад

ryanburbridge same. I was wondering that myself hahaha

@AnthonySvt_ 4 года назад

ryanburbridge probably just a speed handle ratchet

@KalebHoward 4 года назад

What did you do today? Ohhhh just turned a wrench

@JasonGuerard 4 года назад

"It looks like a colostomy bag!" Only Gale Banks 😄

@jayh9635 4 года назад

Mr Banks! I appreciate your R&D. I will keep my stock cover until I can afford yours. Thank for cutting through all the bullshit out there!

@wademiller5737 Месяц назад

I only recently discovered this channel and the scientific-based information is amazing! No wonder so much aftermarket stuff is garbage. I wish I'd have discovered this years ago, and Gale is a legend! I won't buy anything for my Ram that isn't made by Banks anymore. Thanks Gale!

@majobis 4 года назад

I would love to see a fully molded clear version of this cover showing the fluid dynamics working in this diff cover

@BlackKnight-ll8qh 3 года назад

Agreed. I was thinking the same thing

@mrbowtieguy 3 года назад

Me too!

@mikestrickland6290 2 года назад

He did

@peterlast9354 2 года назад

@@mikestrickland6290 he made a clear banks cover? Where is the video of it. Only clear cover here was not the end result banks cover

@TheShift1313 2 года назад

@@mikestrickland6290 i think they mean a clear banks version to show the flow.

@hewavith 4 года назад

Aftermarket Diff Cover Companies after this video: Ight imma head out.

@bankspower 4 года назад

#fact 🤣😄

@mrnobody8540 3 года назад

@@bankspower Thank you

@Zaltic 7 месяцев назад

This is what auto engineering is about. Making things better and more efficient. Not cheaper and easier to produce

@TheFiremonkeyman 4 года назад

lol I somehow knew this was coming when they originally did the video with the clear covers. Gale Banks has certainly earned his swagger with good products over the years.

@blanchae 4 года назад

I love how he broke down exactly what a diff cover should do, researched the OEM cover and aftermarket covers, researched exactly what was happening or not happening, tested and verified his testing then designed the cover. Well done as expected. Kudos to the Banks Power.

@bradfordcustoms7588 4 года назад

I love the transparency with how you built your product and the willingness to show data backing it up. Definitely learned a lot from this video and will only consider buying your diff cover.

@internetcrap7 4 года назад

It wasn't as transparent as you think. Still very biased.

@bradfordcustoms7588 4 года назад

How so? On what points?

@JosephArata 4 года назад

@@bradfordcustoms7588 how about the fact that looking at a top mount rockwell axle differential makes his "fluid dynamic" claims null and void. Due to the fact the bottom of the axle housing, where the ring gear sits is a very shallow dome, and the sides are made like a rectangular tube. Heavy duty axles don't have humps around the ring gear and have done fine for 50+ years.

@bradfordcustoms7588 4 года назад

Batojiri1 that’s like comparing baseball bats to toothpicks. Both are wood but used in different applications and have different purposes. So your point is null

@NeedForSpeed.2004 4 месяца назад

I just watched a 30+ min videos on how diff covers work and I’ve never been more interested. This guy is probably smart enough to figure out how to make a bumper sticker that actually increases horsepower

@calebdoner 3 года назад

So many backyard mechanics think that they can "improve" on the engineered system from the manufacturer. Very few people understand the actual engineering and testing that goes into the existing design. Guess what, that stock diff cover is shaped the way it is for a very good reason.

@cassiuspuckett8789 4 года назад

Finely!!! The conclusion of the diff cover testing. Great show Mr. Banks!!! I just knew we were not going to be disappointed when you completed your testing and your R & D of the new Banks diff cover. I love how you not only did the testing but proved your results. Again Mr. BANKS great job!!!!

@philtrumble 4 года назад

I've been looking forward to this

@myselfremade 4 года назад

OK Emperor Palpatine

@philtrumble 4 года назад

@@myselfremade muahahaha

@redram5150 4 года назад

I was searching for a video thinking I missed something. This episode took a while

@scruffy6151 4 года назад

Good things come to those that wait. Yes i am one of those that has been waiting. I remember when Gale first started to talk about this.

@Noahuhhh 4 года назад

Andrew Crews that’s a dooku line

@olliechristopher467 4 года назад

My gosh Gale you are one sharp man!! Thank you for doing the research for lubricating the differential.

@Treaxvour 4 года назад

This is my kind of guy. Don't put anything out unless you know everything about it! I salute you Mr. Banks.

@TheCulnes 4 года назад

When Mr. Banks put out his very first video, I had just ordered an AFE cover. I did a lot of careful reading to choose a cover and was blown away by the fluid dynamics design failures. Ended up just upgrading to the aluminum finned factory cover which retained the proper ring gear curve. Thanks Gale!

@g0fvt 4 года назад

Part of me is now sold on having an illuminated transparent differential cover.... that was not supposed to happen.

@kushkiller7108 4 года назад

That would be sweet. Imagine if the lube could be made to glow under ultra violet light.

@rtz549 4 года назад

They make them. Search for clear differential cover.

@johnrupert1063 4 года назад

Add uv dye

@rkan2 4 года назад

RGB DIFF COVER FOR ALL

@chugnorris7091 4 года назад

DO IT! !!

@MrSkyentist 4 года назад

Way back I tried to do the same research you guys did on gear lube. Was a huge pain getting the data I was looking for but it is reassuring that actual professionals ended up finding the same thing I did. Their severe gear stinks like hell but it holds up in Arizona summer heat hauling or on the trail. Top notch stuff.

@EPendergraft93 4 года назад

I'm sold. I'll just sit here waiting for the Ford cover...

@daves8407 4 года назад

Same here. Waiting patiently to grab one for my 02 Super Duty 7.3

@EPendergraft93 4 года назад

@@daves8407Same truck I want one for.

@TheWEEZAR269 4 года назад

When can we get one for the Ford F350?

@Noahuhhh 4 года назад

Same. Need one for my 8.8

@jlaustill 4 года назад

@@daves8407 Same, 10.5 Sterling can't come soon enough! My 2002 needs a trutrac, it would be fantastic to knock it all out at once :)

@shitboxoffroad 4 года назад

Absolutely loved this series, now Banks should apply these concepts to other parts and beat out the competition with stuff that actually makes stuff better!!!

@MrAPCProductions 4 года назад

He's been doing it in multiple sections of the industry for more than 30 years.

@vipercrazy 4 года назад

This guy obviously just learned about Gale Banks... 😂

@shitboxoffroad 4 года назад

@@vipercrazy I did!

@topenddean 4 года назад

Thank you Mr. Banks, this is the way all the good companies used to make their products. "Build a better mouse trap and the world will beat a path to your door" Sadly during the 1980's most of the good American companies were bought out, sometimes with a hostile takeover, and now all any of them care about is the stock holders and how much profit they can squeeze out of the reputation the company once had, and then when they've driven it into the ground they file for chapter 11. You sir have a new customer. From this video you have inspired me to look at the other products Banks Power makes for my vehicles. Bravo sir, well done.

@thatrealba 4 года назад

Straight savage. I dang near spit out my coffee a couple of times! He's going to be replacing more diff covers than he thinks. I know my rear pumpkin has all kinds of impact signs. Looks like a great product even if it is fugly.

@Knightmare-gz9ls 4 года назад

Don't gotta be first with a product just be the best product available. Love banks technology

@tonystone6955 4 года назад

The amount of engineering and work into this damn diff cover is Insanity

@Pottalowski 4 года назад

Tony Stone the devil is in the details

@claycurry643 4 года назад

That's how you know it's a quality product. If he will put that much research into a simple diff cover image how much he puts into the other products

@mbox314 4 года назад

As an engineer I disagree, oil and metal are good conductors of heat, I see no value in putting fins inside the cover, that is just going to create turbulence and friction, had they left those out it could be as efficient as the stock cover.

@claycurry643 4 года назад

@@mbox314 but it's more efficient than stock. That's whe whole point. Why would they make it "as efficient as stock"

@mbox314 4 года назад

@@claycurry643 I don't remember seeing the part in the video where it says how much more efficient it is. They claim to lower temperatures but I did not see a claim for more efficiency.

@AnthonyJ350 4 года назад

This is amazing insight to proper design. Would love to see a comparison vs the T/A Differential girdle.

@needadate Год назад

I watched this series when it came out (I'm a subscriber and a 40+ years fan), but I came back to give a shout out to Casey LaDelle just to show you guys what a smart idea it was to send him a cover!

@Metalution 4 года назад

I had a feeling that there was some serious research happening while I waited for this “season finale”. Well done. This is a 2019 best video.

@dv2852 4 года назад

Just love listening to this legend. I don't even have a truck!

@jeep2003 4 года назад

most of my cars dont even have a differential cover lol

@home541_ 4 года назад

@@jeep2003 only my wife's has one on the rear diff lol

@Bgearmcgee 4 года назад

Me too but at 1.5x playback speed

@Stewbob112 4 года назад

Same here lol

@ictpilot 4 года назад

D V , Now you must buy one! 😁

@joboy77 4 года назад

I don't even own a truck I would need this diff cover on, but this is a great and super informative video and these giuys really know their stuff. Cheers to Gale Banks and Banks Power.

@DustinGould 4 года назад

"our new ram air diff cover kicks ass " ---- id buy it just for that tag line :)

@yodawg3469 4 года назад

He's a legend in the automotive world for a reason!

@vincentorona163 4 года назад

Love the work you guys did, I’ve followed this series from the beginning and was excited to see fruit of all your dedication! Can’t wait to get mine and spread the word. Thank you for putting out a quality product.

@t.farris1755 3 года назад

Wow.... after explaining the benefits of that diff... I will be looking looking into purchasing one...

@Jones_Media 4 года назад

Mr. Banks gets pissed on this episode 😂 I laughed so hard when he said ASS HATS 👍🏽

@askmeaboutarcticcats 4 года назад

Thank you gale for putting in the time and engineering into everything you make!

@jkreviea 4 года назад

I LOVE the testing methodology behind your products. I remember watching the beginning of this series a while back. Glad you followed up.

@6bolt_Z 4 года назад

Would like to have seen the fluid flow inside the new Banks cover, using a clear prototype similar to the other covers they tested.

@gregorygolden1296 Год назад

Me too. And why didn't he show his??

@zukacs 11 месяцев назад

@Reeeeeeeeeeeeeeeeee53d print or acrylic mould

@Fartmastaman 4 года назад

About time Gale! I've been waiting almost a year now!

@jimmyvaught 4 года назад

IHCheese 11 long months

@baby-sharkgto4902 4 года назад

@@jimmyvaught which is almost a year

@MrTheHillfolk 4 года назад

I'd have to say it's worth it and I don't even have a truck.

@calevel 4 года назад

I’ve been waiting for this moment since Dale started this over a year ago, now it’s time to list my Mag Hytec on Craiglist while I order one of this. 🇺🇸👍🏻 we love you Mr Banks!

@greasemonkey88 4 года назад

I've been waiting so long for this! I've watched all what is it now? 8 videos of testing and retesting? Love it. Thanks for all you do, testing and R&D.

@Austin-qq7kt 7 месяцев назад

This is why you are the best at what you do! Living legend

@schmitty69 4 года назад

YESSSS I feel like I've been waiting for this for over a year!! I need this cover for a 2015 Silverado 1500. I want a drain plug, fill plug, and some type of sight glass. I dont care if its 600 bucks. I. WILL. BUY.

@truckcampertraveler7369 4 года назад

Jeff Schmit hahahahah

@jaydunbar7538 4 года назад

Its not just a feeling, it has been over a year lol

@kushkiller7108 4 года назад

Awesome. I dont even have a vehicle that this could work on but I want one.

@4wdiesels Год назад

My '19 Ram is patiently waiting for me to save up for this diff cover and Banks Monster Ram intake horn! I'm sold on their R&D. And Gale seems like a nice guy and makes an entertaining video.

@jaredmiller7421 3 года назад

Awesome video ! Glad to see someone who cares about what they sell!

@DesertRunner602 4 года назад

Never been excited for a diff cover video. I've been waiting for the final product

@TheAlane0607 4 года назад

You’ve perfected the diff cover, now what can you do with a transmission pan?🧐

@702muzik 3 года назад

I'm waiting on that lol I hope he does

@glasser2819 3 года назад

A centrifugal filter (spin the oil) would easily remove all the contaminants in suspension! Cheap Honda CB125 motorcycle use to have a "centrifugal filter" to catch the internal clutch particles out of engine oil. Cheap and simple design! 👍🏼

@MrMills425 4 года назад

Thank you for developing this and sharing this with us. The knowledge you have shared is really helpful and valuable. I can only imagine if you used this in rally competitions.

@stephanM5 4 года назад

Gail you're an absolute genius! Love the research you do.

@bgj2940 4 года назад

Good job guys. Finally some true engineering. You might want to look into racing applications as well. GTR's,Corvettes, Camaro's, mustang's.... Hell even the Miata (the most raced car ever produced)

@Fluffy65 4 года назад

That's what I'm thinking too. Where's all of our race and muscle car applications?! Hell, we'll need them for powersports, Jeep, and other popular off-road models too! I think Gale just found the product he can retire on.

@JayRussellDuramax 4 года назад

Gale Banks is the R. Lee Ermey of Engineering!

@bankspower 4 года назад

😄😄😄

@peteygarrido 4 года назад

That's awesome. it's nice to see all the time and effort that they put to the product with actual real data. Respect to him and the company 👏🏻👏🏻

@insaine123 4 года назад

I can assure you i will have one of these under my truck! Thanks Mr. Gale!!!!

@bunkybell1120 4 года назад

You are the man. I have always wondered about the flat covers. Thank you for taking the time to show us all what's really going on. With these after market covers. Keep doing what your doing. Great video I learned today. The 12 dislikes must be his competition 🤔🤣

@LILLJE 4 года назад

I’m also very impressed with the illustrations, very professional

@cmill169 3 года назад

BANKS!!!! Your a genius!!! Albert Einstein of diff covers!!! Love your attention to detail!!!

@shawnadams1558 4 года назад

Gotta say I love how honestly Gale is. Even showed it's only weak point and says " if you do that I'll give you another" now that's a stand up dude. Keep up the good work, and making stuff that's actually useful!

@cajun869 11 месяцев назад

It's not a weak point, that was purposely designed that way just in case you hit a rock.

@ioannisiordanidis3562 4 года назад

Watched the original series from a year ago and its amazing to see the amount of effort Banks Power has gone into over and beyond the work to engineer those, in order to give us insights and a better understanding of the engineering. Amazing. Gale Banks is the GOAT! Thank you!

@bankspower 4 года назад

Thank you for the Kudos!