How To Find Out Why Your Power Wheels Battery is Not Charging

Подписаться 3,3 тыс.

Просмотров 371 тыс.

50% 1

www.techbattery...
Wondering why your Power Wheels battery isn’t charging? First, you’ll need to figure out if the charger or the battery itself is the problem. In this video we go over how to test both.
What you’ll need:
- A volt meter (these can be found at your local hardware store for $10-15)
- Power Wheels battery
- Power Wheels charger
- 2 paperclips if you are testing the red Power Wheels battery
Testing the Charger Output:
- Switch the volt meter to the 20 DC side.
- Touch the electrodes to the Power Wheels battery charger (negative to negative, positive to positive)
- You’ll always want the voltage to be higher than the battery. For example, for a 6v battery the voltage should be 7+. For a 12v Power Wheels battery, the voltage should be above 13.5
- Anything less than these voltages will not be able to charge your battery
- Note: This test will not work on the Power Wheels quick charger, stay tuned for a separate video
Testing the Battery:
- This test is similar to how you checked the Power Wheels charger. Place the electrodes against the battery (negative to negative, positive to positive)
- If your battery is below a certain threshold, the charger will not work
- The 12v battery should be at 10.5v+ and the 6v battery should be over 5v. Any lower and you’ll need to replace the battery
- Note: Testing the red Power Wheels battery is a little trickier because the electrodes won’t fit into the slots. You’ll want to first insert paperclips, and then hold the electrodes beside them against the battery
www.techbatter...
Be sure to give us a call if you have any questions, or visit our website: www.techbattery....

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 173

@juliemaru5331 2 года назад

*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

@jeffdarlison9676 Год назад

Making use of the ru-vid.comUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type

@kemyish 5 лет назад

Thank you for this Video. I have my daughter jeep sitting for a year now not driving because i am not sure if its the battery or charger that have gone bad. i will be going home to test this.

@karlamadison843 4 года назад

kemoy stephenson hey did it work for you?

@karlamadison843 4 года назад

I have a ride on car too and I’m not sure what’s wrong with it either ... does yours have the little red light ?

@SeifEddineB 5 лет назад

4:55 be very cautious to not touch both clips with a multimter probe, this batteries are low voltage but high Amper power, the clip will probably melt if short-circuited

@cosmojinxable 5 лет назад

This was a huge help, thank you!

@MandosTechHelp 7 лет назад

Great video. What should a fully charged, stock power wheels read? I've heard anything between 12.7 up to 13.5.

@micahforman1426 8 лет назад

I tested mine and its putting out 11.5 volts, do you think that is enough voltage to power the car. Our car will not work and not sure if its the battery or the car?

@stephanie.treanor Год назад

This was EXACTLY what I needed! Thank you soooo much! :)

@angelgalarza6834 11 месяцев назад

What are you plugging the part that goes on the power wheel connection? Not the part that goes into the outlet but the opposite end? What device are you using?

@mariaguerrero3235 4 года назад

Yes but for a v12 power wheels battery needs a Max 40 AMP FUSE or you need new charger

@tails2fan 7 лет назад

I picked up one of these out of the local Goodwill rubbish pile and figured I'd use it for something. Thing was severely undercharged at 4V. Threw it on a trickle charger and it seems to be charging. Has anyone taken one of these apart yet? Most Lead Acid batteries I've handled swish and slosh. This one is pretty solid.

@SebastianShaw1 7 лет назад

Queen Chrysalis

@avoidrezo3189 5 лет назад

Or you can buy a new one at walmartt

@chantel511 7 лет назад

hi have a power wheels wild thing . the first 2 charge lasted for around 3 hours however when I tried to charge the 3rd time the car only moves like for one minute and the led light blings meaning battery dead.

@cooldaddy1973 3 года назад

Haven't been able to find the video about charging the plug in type (like a cell phone charger) of 6 volt battery. If you could post a link

@TonySaldana5045 8 лет назад

Thanks very helpful video !

@novachrono2236 6 лет назад

clean presentation bro keep it up.

@briantelander2544 3 года назад

Help! I keep burning through batteries. Repair shop can't find issue. Voltage drops instantly

@greggjose2610 3 года назад

Thanks for your help

@SanjivTyagi 6 лет назад

Thanks for the video, Gem! :)

@JetSkiBuyFixPlaySellChannel 10 месяцев назад

Is there a percentage rule for batteris for being dead and fully changed? For example a 6 volt battery that is 10 percent below 6 is a dead battery?

@HighTechBatterySolutionsInc 10 месяцев назад

The voltage range of a battery can vary depending on the type of battery, its age, and its condition. As a general rule of thumb, a battery is considered to be dead when its voltage drops below 80% of its fully charged voltage. In the case of a 6V battery you would be in the low 5V range to be considered dead.

@JetSkiBuyFixPlaySellChannel 10 месяцев назад

@HighTechBatterySolutionsInc thanks for the response.

@mgc5012 Год назад

I have a 6V power wheels and the battery reads out 6.55V after charge. Charger is also putting out proper voltage. I plugged it in and checked connections. As far as i can tell, all switches are working. I even replaced the pedal switch with a new one. I hooked the battery up directly to the motors and they dont spin. As a final test, I plugged in a 12V battery through all of the cars wiring and everything seemed to work. Is it possible that the motors are old and the 6.55V just isn't enough to move them anymore?

@HighTechBatterySolutionsInc Год назад

Unfortunately I don't have sufficient knowledge on how age affects electric motors and if a higher and higher voltage is necessary. Our electric fork lift is over 30 years old with several thousand hours on the machine and the battery voltage (and motors) remain the same with no issues. Does the vehicle take a single 6V battery or two? If you have more than one motor in there then I'm assuming it's a dual battery setup which means your motors might need 12V to run?

@amjadkhan-jv6xj 5 лет назад

Helpful video, thank you

@nathanbantle4770 7 лет назад

I got a free power wheels toy and knew it needed a new 12v battery. Bought the new battery and the car drove great for an hour. Went to charge the battery and now the car won't drive for more then 30 seconds even after a 24 hour charge. I assumed the charger is dead which I verified using your strategy. However the battery is reading 5.5 volts which according to your video means the battery is in need of replacing. Is that possible? It's a brand new 12v battery. Just wanting to verify that if the readings are that low it means the battery is bad and not just in need of a charge. Thanks!

@HighTechBatterySolutionsInc 7 лет назад

Since the battery is brand new and used only once or twice then there is a very good chance that it will bounce back from 5.5 volts, but you need to get a new charger ASAP. The longer the battery sits in this extreme discharged state the harder it will be to bring it back.

@nathanbantle4770 7 лет назад

Thanks. It took some messing around but I got it back up to 11.93v. I had to cut my charger cables and connected it to my car battery charger first (charger wouldn't read it like you said). That bumped it up to about 10.5 volts. I then re connect my wires to the actual charger and did a single charge which brought it back up to 11.20. Sat it for a couple days and charged it again resulting in a 11.93 charge. Seems like it should be fine although it's not charging as strong as your battery but maybe it will recover more after a few new charges. Thanks for the help.

@barnettstrong 7 лет назад

Did you make the video for the quick charger testing ?

@HighTechBatterySolutionsInc 7 лет назад

You can not test a quick charger using the above method. The charger itself will not put out any voltage until it makes a solid connection with a battery. The only way to test the charger is to use a power wheels battery that you know is good. You test the voltage of the battery and write it down. Once you have your first reading you would then plug in the quick charger and let it sit connected for 10 minutes. After that time has passes you remove it from the battery and test the voltage of the battery - if its above the number you had previously written down then its working. If you can give me an idea of the problem your having with the charger then I can do my best to answer it.

@spiritualsarver2125 4 года назад

GREAT video!! Thank you!

@gilzr473 5 лет назад

Great video thanks for sharing 👍👍

@smithcommajohn3545 2 года назад

Do the 12v batteries have any sort of internal protection or safety devices that trigger in a collision? My child hit our out door table and the PW immediately stopped working. Battery is at full charge but still won't go. Swapped another working battery and the PW goes fine. Thoughts?

@HighTechBatterySolutionsInc 2 года назад

Not to my knowledge, the only internal safety precaution that I am aware of in the batteries is a self re-setting fuse.

@oldiesremix 6 лет назад

you are the hero.

@Silversamus9 7 лет назад

I just bought my son a marvel brand spiderman powerwheel car at a garage sale but it didn't come with anything else, how do I know if it runs on batteries or a charger or both and where is the battery located in the car and how do I determine the exact kind/brand charger needed to make the car move???

@ErikHaanVincent 8 лет назад

Well done and very helpful. Thank you!

@Here-2-Learn 3 года назад

Anyway to charge the battery with a car charger to give it enough volts to charger on the power wheel charger?

@HighTechBatterySolutionsInc 3 года назад

Yes, but two things to note. 1. You don't want to blast the battery with anything higher than 10 amps, anything higher and you run the risk of blowing the top off the battery. 2. The connection prongs in the battery make it really tough to hook battery clamps to. If you do rig up a good way to make a solid connect with a larger charger then hit it at ~10 amps for 45 to 60 minutes and then try plugging in the standard charger immediately after to see if you can recover it.

@xOscarIGZx 3 года назад

My 6v battery reads at 6.3 volts however won't power the car. I've checked the charger and that all reads good as well

@HighTechBatterySolutionsInc 3 года назад

You may be looking at an issue with the toy if the battery has good voltage and your getting no movement. The first thing to check would be the switch under the gas pedal and work your way backward from there.

@deadnuts22 7 лет назад

Are you related to fisher You know fisher price

@StudyMusicU 7 лет назад

Great video

@andrewbell4361 5 лет назад

Do you know where I can get the V. W. Motor power relay looks like part # W480-03 Andy

@yeseniamacias662 3 года назад

how can I upgrade my voltage from 6v to 20v what kind of convierter do I need? how much does the fuse box hv to be?

@stewartbaird86 3 года назад

Wire batteries in series if you have the room for more than 1 battery. Go to an automotive store or section of a store and buy a fuse plug and fuse. My son has a 12V ( 6Vx2 in series) Jeep. I ordered a connector for my Milwaukee batteries and will use an 18V instead of the 2x6V

@achilles1373 Год назад

I've done this. The batteries fully charge, but nothing in the power wheel works. I've chased power all the way to the motors. Dead cell?

@HighTechBatterySolutionsInc Год назад

while testing the voltage at the motors hit the gas peddle to engage the motors - check for a massive voltage drop, if you do then a dead cell in the battery is a definite possibility. If there is no change in voltage - i.e. your getting voltage to the motors but no drop when you activate the motors then something could be happening with the motors.

@djfloth 4 месяца назад

My new 12v battery shows .04 and my old 12v charger is jumping around between 5-17. I assume this means they are both bad? If so, do you think my charger possibly ruined my new battery or did I possibly charge it too long? It worked fine until I tried to charge it for the first time.

@HighTechBatterySolutionsInc 3 месяца назад

Thats an extremely low voltage to be seeing on the new battery. The Power Wheels toy itself will not drain the battery past 10.5V maximum which leads me to believe that you may have an issue with that charger. Have you gotten a volt meter on the charger yet to see what its putting out?

@djfloth 3 месяца назад

@@HighTechBatterySolutionsInc Yes the charger is jumping around between 5 and 17.

@HighTechBatterySolutionsInc 3 месяца назад

@@djfloth How long did you leave the battery on charge, and by new 12V battery - it was purchased this year?

@djfloth 3 месяца назад

A couple days. Yes, new this year.

@HighTechBatterySolutionsInc 3 месяца назад

@@djfloth I'm leaning towards the charger being the issue. If the new battery had a faulty cell you would see evidence of it during your first use.

@oldiesremix 6 лет назад

you are the here. Thx so much,

@heleneluongo3216 8 лет назад

What voltage reader are you using? How much?

@HighTechBatterySolutionsInc 8 лет назад

+Helene Gladfelter I honestly can not remember how much the voltage meter was, but I do know that we get them from Home Depot - they have a couple of models available from budget based units to expensive contractor style. The one used in this video is on the lower end of the spectrum.

@guerradan1958 4 года назад

I have been trying find the correct battery charger for this battery. Can you link me to the 12 bolt charger for that battery? The battery is model 1001175653. The ones offered the terminal connector is not the same as the one you. Thanks

@HighTechBatterySolutionsInc 4 года назад

Sure! www.techbatterysolutions.com/power-wheels-12v-grey-battery-charger-00801-0972/

@bbperez6361 7 лет назад

Will you be able to get a reading to determine whether your battery is good or not if the battery isn't charged?

@HighTechBatterySolutionsInc 7 лет назад

Negative, you will need to attempt to charge the battery first. All a voltmeter can tell you is the state of charge of the battery, it can not put a pass or fail load test on the battery.

@bbperez6361 7 лет назад

High-Tech Battery Solutions, Inc Thanks appreciate it

@ParminderSingh-dt4mc Год назад

My charger works, but i am not sure whether the power goes to the battery or not.. any idea to check that?

@HighTechBatterySolutionsInc Год назад

If you're not sure the battery is accepting the charge you can test the voltage of the battery without the charger connected, then connect the charger and leave it for an hour. After the hour is up pull the charger from the battery and let it sit un touched for an hour. Check the battery voltage again and compare the two readings.

@ParminderSingh-dt4mc Год назад

@@HighTechBatterySolutionsInc thank you. Really appreciate.

@joshuafreeman6720 3 года назад

Thanks.. My charger says 7.5v and I tested it and it was actually right around 7.5v. But my battery won't charge and it's reading 3.4 guessing need a new battery for my kids 6v ride on it sat in charged for a long time

@HighTechBatterySolutionsInc 3 года назад

Yes, it sounds like the charger is functioning correctly but the battery is just not accepting the charge at this point.

@leokhan8888 7 лет назад

I bought my son a brand new power wheel drive 2 weeks ago. It was working fine until I let it charged over night. The seller warned me about not to charge more than 3-4 hours. Now when I start it up, all the lights and musics are working fine but the car itself won't drive forward/reverse . Do you think it burned the motor or just the fuse??

@HighTechBatterySolutionsInc 7 лет назад

Hello Leo, I'm not sure that the battery is the issue if the lights and the music are still working on the car. You can check the fuses to see if any are burned out on the Toy - I think it may be a motor related issue.

@arundeshmukh5819 2 года назад

@@HighTechBatterySolutionsInc

@MikezogFTW 7 лет назад

Hey I have a question I haven't used my Power Wheels 12-volt battery for 13 years it's in good condition will it still work I can't currently check it with a voltmeter

@HighTechBatterySolutionsInc 7 лет назад

If the battery is 13 years old then is going to be time to replace it - the typical lifespan on these is 3 to 5 years. One quick way to tell if an old battery is bad is to physically shake it. If you can hear debris shifting around within the battery that means the lead plates have disintegrated and/or fallen apart.

@alpanza12 7 лет назад

Thank you for the video. I have my battery and charger within your specs. When I hook up battery to the power wheels it seams there is a HUGE draw of power from battery. I have about 13.88V from battery. Not sure what else could be the cause of this issue.

@HighTechBatterySolutionsInc 7 лет назад

There will be a draw (voltage drop) when the toy is pulling power from the battery, however, after the initial draw the battery should maintain its voltage level for a bit before slowly inching downward. If your battery drops significantly - into the 10-volt range - and doesn't stop its decline then its time to take a look at a new battery.

@lindaruiz8749 5 лет назад

Do you know where I can get a replacement battery for the Dynacraft Disney Princess Carriage? 12fm7 24v7ah/20hr is stamped on it.

@HighTechBatterySolutionsInc 5 лет назад

When you look at the battery, is it two 12 volt batteries wired together?

@mare6638 6 лет назад

i've tried to reuse a dead battery, 7.2Ah 600A 12volts, when i tested it it was 1V DC so i tried to charge it, voltage stabilized at 12v but it's not charging when i change from V to A on multimeter and try again it says 0.00 but even charger that charges the battery says 0.00 plz help. it's Pb/lead battery

@jasonevans1820 7 лет назад

At what voltage should I put the battery on the charger?

@princetamtam5450 5 лет назад

9.6

@karlamadison843 4 года назад

Not sure if it’s the battery or charger but I have a beetle power wheel car . I put it to charge and then I turn it on and a red light shows but it doesn’t move forward or backwards doesn’t move at all only the sounds play like the horn , etc

@HighTechBatterySolutionsInc 4 года назад

Do you have access to a voltage meter?

@karlamadison843 4 года назад

No do they sale them at Walmart ?

@karlamadison843 4 года назад

the car turns on but it doesn’t move at all not sure what’s wrong

@karlamadison843 4 года назад

Do you think I should buy new battery? It’s a 6v car

@HighTechBatterySolutionsInc 4 года назад

@@karlamadison843 Tough to say without seeing if the battery is actually discharged. When was the last time the toy was running?

@jerrybassoquiny6050 4 года назад

Hry yheir my name is jerry just wanted to see how i can check the fiuse

@germaineboulware8697 7 лет назад

My sons car was completely Dead before we started to charge it, now after the charge it won't cut on what did I do?

@HighTechBatterySolutionsInc 7 лет назад

Do you have access to a voltage meter? If so the best thing to do would be to check the voltage on the battery to see if it took a charge. Fully charged for this battery would be 12.8 + volts. If the battery is testing fully charged then issue is somewhere in the toy itself. If the battery is stone cold dead then there are options depending on the voltage reading that you get.

@fred5149 5 лет назад

Is it possible to over charge these 12v batteries and kill them ?my daughters power wheels radio will turn on but as soon as I step on the peddle to test for acceleration the radio dies, and no power.

@richardprice9564 5 лет назад

Yes, if you leave the battery on charge for days on end then overcharging will occur. Unfortunately, it sounds like your battery needs to be replaced. Your battery is able to retain proper voltage to operate a small draw like the radio but as soon as a real load is applied it fails outright. I am pretty confident your issue is limited to the battery because the radio also dies when you hit the pedal - if it remained on then you may have a fuse or switch issue with the pedal itself.

@fred5149 5 лет назад

@@richardprice9564 thank you bro for the feedback I appreciate it.. God bless take care man

@missmeyon 7 лет назад

Did you ever make a video for the quick charge type?

@HighTechBatterySolutionsInc 7 лет назад

We have not made a quick charger video because it is a bit tricky to test those units. The charger itself will not engage (put out voltage) until it makes a solid connection with the power wheels battery. What issue are you having with the charger - I may be able to help trouble shoot it for you.

@markhabbi 7 лет назад

I have a quick charger and it simply wont do anything, no lights illuminate and it will not charge the battery. The battery is good because I am currently charging it with a 12 volt automotive trickle charger. Is there anything I can try to fix the original charger?

@guljana459 6 лет назад

My son power wheel is so slow I don’t know what to do with it it doesn’t go any faster then 6v

@flyonthewalls 6 лет назад

Can i use a 24v 2,5amp adapter to charge the e100 electric scooter with?

@HighTechBatterySolutionsInc 6 лет назад

Yes, the razor E100 scooter is a 24V unit that will accept that charger - just be aware that it is a bit higher of a rate of charge then what comes with the scooter - so don't leave it on for more than a few hours.

@flyonthewalls 6 лет назад

Thank you, i will give it a go. Its actually a 24v receipt printer charger and i cant find a standard charger for the E100 where i am from.

@exlost245 2 года назад

I got a reading 6.4 and 6.35 for my 6volts batteries. Assuming the batteries are still ok but it thr power wheel wont turn on

@HighTechBatterySolutionsInc 2 года назад

That sounds like the batteries are okay and should at least move the power wheels. I would try lifting up the back of the toy so there is no pressure on the wheels and hitting the accelerator. If you still don't get anything then you most likely have an issue with a switch.

@exlost245 2 года назад

@@HighTechBatterySolutionsInc just did that. Nothing happened. Im looking right now at the ignition switch and acceleration peddal. But can't or have no idea yet how to determin if its faulty or good 😅

@HighTechBatterySolutionsInc 2 года назад

@@exlost245 You can begin testing with a voltage meter. You can test the voltage at the motor to see if there is any, and or the resistance of the switches to see if thats the hold up.

@exlost245 2 года назад

@@HighTechBatterySolutionsInc replaced the batteries and charger. But still no power. Even the auxiliary(lights, sound etc) is not working. If its not the switch, probably the board?

@HighTechBatterySolutionsInc 2 года назад

@@exlost245 Its really tough to say without having it in the shop. If the voltage is not flowing past the board in the toy then thats going to be the issue, have you check voltages at all with a voltage meter to see where the bottle neck is?

@latoyawashington67 4 года назад

High Tech Battery solutions Inc I have a paw patrol E cruiser has 6volt battery was fully charged working good for a year i did notice battery was low cause car lights were flicking on and off while on. Now i charge it no power at all left it plugged to wall car wont cut on. Do i need to replace battery

@HighTechBatterySolutionsInc 4 года назад

Was the battery sitting for a long period of time before you tried charging it? The life span on these averages about 3 years, so if your at or past that mark chances are getting a new battery will get you back up and running.

@latoyawashington67 4 года назад

@@HighTechBatterySolutionsInc its been a year since i bought it charged ot once. Just last week it was on but not driving the battery was low now its been charged over night no lights or ignition start. Maybe i need a smart charger the car barely 2yrs old

@HighTechBatterySolutionsInc 4 года назад

@@latoyawashington67 Do you have access to a voltage meter to check either the output of the charger or the voltage of the battery?

@latoyawashington67 4 года назад

@@HighTechBatterySolutionsInc no sorry I don't. I was thinking taking the battery to an autozone or somewhere to test the battery. Or unfortunately ordering one from manufacturer

@HighTechBatterySolutionsInc 4 года назад

@@latoyawashington67 If you do end up taking it to Autozone I would bring the charger as well to have that tested -

@V8vortec98 5 лет назад

My 24 volt battery read 16 is rhat too low? My Multimeter wont read the charger I get a negative reading

@HighTechBatterySolutionsInc 5 лет назад

That is stone cold dead for a 24V battery. Who makes the battery and charger?

@jerrywatson9681 3 года назад

Awesome

@engrken0 3 года назад

do u have a video on how long should a battery charge before it is full?

@HighTechBatterySolutionsInc 3 года назад

We do not, the charger for both the Red 6V and the Grey 12V units are going to be in 1 AMP range. You can divide the capacity (AH) of the battery by 1 (1 AMP) to determine your charge time assuming the battery has been run all the way down. For example, the Red 6V Power Wheels Battery is rated at 9.5AH and the charger has an output of 1 AMP so 9.5/1 = 9.5 hours of charge time. I hope this helps!

@engrken0 3 года назад

@@HighTechBatterySolutionsInc thanks.. it helps me a lot

@beckhamsfamilyjourney 3 года назад

My battery is good but it won't go? What else should I look for?

@beckhamsfamilyjourney 3 года назад

I have a wild thing 360

@HighTechBatterySolutionsInc 3 года назад

If you know that the battery is good but the toy is not moving at all then you may have a bad switch - most likely under the 'gas' pedal of the toy. You can either test the switch with a multimeter or give power wheels customer service a call - they have repair centers all over the US that you can drop the toy off for repairs.

@yungzunga 4 года назад

my 12v charger reads 11.5. Is that to low?

@HighTechBatterySolutionsInc 4 года назад

The charger is probably good. It is not uncommon for us to test a 12V Power Wheels charger and see it putting out 11 ish volts. As soon as the charger is connected to a battery it will increase its voltage output into the 13-14V range.

@jasonhunt5367 7 лет назад

My battery voltage reads 10.55 but doesn't work at all the car. :-(. Any ideas why?

@HighTechBatterySolutionsInc 7 лет назад

That battery is pretty discharged Jason, you will need to get it up into the 12.6V range or above to see any solid performance out of the battery.

@redcodefsu 6 лет назад

Same here, I had my battery on the charger all night and it only reads 10.5 v. Guessing it won't ever get back to 12+

@princetamtam5450 5 лет назад

I got a new battery but it reads 7.25 or 8 and doesn’t charge

@HighTechBatterySolutionsInc 5 лет назад

New as in you just bought it new? The battery is stone cold dead, your best chance to bring it back is to leave it on the charger for 24 hours and see if you get any improvement on the voltage

@jesseperez6139 4 года назад

I get surprised when I come across a video like this where a someone usually owning a small business kindly amd trustingly gives out their phone number to anyone who watches it on RU-vid. I’m curious to know how it’s affected your business if at all. Please Like so he share with us

@katiebuggo1510 3 года назад

It stays red and wont go.. please help

@HighTechBatterySolutionsInc 3 года назад

Is this the light on your battery charger staying red?

@Electro-nics Год назад

I knew i needed a new battery but they are expensive so i wanted to confirm this my battery reads .07volts lol

@nickmelone958 5 лет назад

what if the amps are low?

@richardprice9564 5 лет назад

The test show in the video will get you the voltage readings when you say the amps are low are you referring to the actual capacity of the battery?

@1027tonystephens 4 года назад

Why do I have a 6volt charger with my 12volt system.

@HighTechBatterySolutionsInc 4 года назад

Either you have the wrong charger all together or your 12V setup is a pair of 6V batteries. Does your battery look like the Grey cube in this video?

@1027tonystephens 4 года назад

The battery is black and 12 volt. The person I got it from said that the 6 volt charger is what came with it. Strange!

@jerrybassoquiny6050 4 года назад

Everthing is good but the charger blinks red and green light flashes on of green red

@HighTechBatterySolutionsInc 4 года назад

If your charger has an LED light then you have the old school quick charger. I am not really familiar with this unit however I believe when the lights are alternating between red and green then its indicating a voltage issue with the battery.

@jerrybassoquiny6050 4 года назад

ON THE CONNECTOR IT HAS A FUSE ON THE CABLE ATACHED TO THE BLACK WIRE.

@justinmcvay5560 2 года назад

What if the battery wont hold a charge for more than 10 mins

@HighTechBatterySolutionsInc 2 года назад

If the battery takes a full charge but lasts for a very short duration of time then your looking at a capacity loss. In this case a replacement battery is recommended to get the full run time of toy.

@justinmcvay5560 2 года назад

@@HighTechBatterySolutionsInc so replace the battery?

@HighTechBatterySolutionsInc 2 года назад

@@justinmcvay5560 Yes

@justinmcvay5560 2 года назад

@@HighTechBatterySolutionsInc thank you

@aliciagillians4125 7 лет назад

y my baby power wheel battery not chargeing up

@HighTechBatterySolutionsInc 7 лет назад

Did you try the steps outlined in the video?

@johndoe-wt4ui 5 лет назад

How do I know if the battery is fully charged????? 12v

@richardprice9564 5 лет назад

The battery voltage should be 12.7 or above to be fully charged. Unfortunately, Power Wheels has stopped making the chargers with the charge LED light on them so if your battery is discharged the general rule of thumb is 8 to 10 hours of charge time to get it back up to par.

@johndoe-wt4ui 5 лет назад

Richard Price thank you man I appreciate your help

@kevykev38 7 лет назад

all power wheel batteries are garbage. for 4 years now I've been using my snapon 18v drill and impact gun batteries with no trouble on my son's power wheels. 18v brings all his power wheels to life and they are fun,and fast. try it out

@automaticoprudenciawisteri8315 7 лет назад

could u show me how

@kevykev38 7 лет назад

Brandin James it's easy,I cut the plug off all my son's power wheels. black wire is - white wire is + positive. find out which side is positive and which side is negative I used male speaker connectors. snapon batteries are easy the connectors slip right in

@keitherricker7673 7 лет назад

kevykev38 m

@PH-ry2bj 6 лет назад

So you use a gun battery to operate you toy car?

@PH-ry2bj 6 лет назад

BMW you car won't charge. The charger only has plug in like to go in a radio (hollow opening). 2nd time charging and won't charge

@kateworkman4040 5 месяцев назад

But it didn't say why

@HighTechBatterySolutionsInc 5 месяцев назад

In order to find out why you need to test both the battery and the charger to find out the issue...

@kateworkman4040 4 месяца назад

But why is it not charging? That's what the title eludes to.

@HighTechBatterySolutionsInc 4 месяца назад

@@kateworkman4040 Test the charger with a voltage meter, if the charger is working. Test the battery, if the battery is fully charged and the toy is still not running them you have an issue with the toy. If the battery is not fully charged after being on the charger for 8 to 10 hours and you know the charger is working, then its a battery issue.